|
| 1 | Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete all as specified and directed by Engineer-in-Charge. |
| 2 | Rendering 15 mm thick in cement mortar 1:4 over of brick or concrete surfaces finished even and smooth without using extra cement using water proofing compound, complete all as specified and directed by Engineer-in-Charge. Note-WPC will be measured and paid seperately |
| 3 | Rendering 10 mm thick on other than fair faces of brick work or concrete surfaces, finished fair and even on walls in cement mortar 1:6, in patches, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Rendering 5mm thick in cement mortar 1:3, on fair face of concrete surfaces ceiling etc.at any height and removing rubbish out of premise land all as specified and directed. |
| 5 | (a) Preparation of new plastered external surfaces by scrapping and sanding with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of diameter of 7\\"/9\\" using a 80 grit sanding paper to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.(b) Material and labour for 2 mm thick waterbased cement base wall care putty over the prepared WALL surface @ 1kg per sqm by mixing the putty powder by adding water as per manufacturer instructions and mixing it in putty mixer with a capacity of mixing 40 kg putty in single go. The putty mixer should have variable speed functioning for preparation of smooth and lump free putty(c) Appliying one coat of waterproofing primer/ damp-proof primer @ 1 Itr per 50 sqft. diluted with 30 % by water to be applied using using an airless spray machine of with a flow rate of 2 ltr per minute having a pressure of 3300 PSI.(d) Allow 4-6 hrs to dry the surface for painting of subsequent coats.(e) Material and labour for applying two coats of waterbased premium exterior acrylic emulsion paint on prepared surface approved colour with silicon additives, with heat reflectant property which can reduce the painted surface temp by 5 degree and gives excellent protection against UV attack with VOC less than 50 gram/ litre as per the LEEDs specifications, anti algal properties in two coats @ 1L/ 50 sqft diluted with water as per manufacturer instructions applied over priming coat with airless spray machine of paint application with a flow rate of 2L per minute having a pressure of 3300 PSI upto 3rd storey of bldg complete all as specified and directed by Engineer-in-Charge. |
| 6 | Preparation of plastered new surfaces of ceilings and applying two coats of white wash including preparation of surface (upto 3rd story of bldg), complete all as specified and directed by Engineer-in-Charge. |
| 7 | Preparation of new plastered surfaces of wall and applying two coats of premium acrylic emulsion with roller on walls over and including one coat of primer and 1 mm wall care puty including preparation of surface (upto 3rd story of bldg), complete all as specified and directed. |
| 8 | Preparation of old plastered surfaces of walls and applying two coats of cement base paint (upto 3rd story of bldg), complete all as specified and directed by Engineer-in-Charge. |
| 9 | (a) Complete removal of existing treatment by scrapping and sanding with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of diameter of 7\\"/9\\" using a 80 grit sanding paper to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.(b) Material and labour for touch up water base cement base Putty application wherever required over the prepared wall surface @ 1kg per sqm by mixing the putty powder by adding water as per manufacturer instructions and mixing it in putty mixer with a capacity of mixing 40 kg putty in single go. The putty mixer should have variable speed functioning for preparation of smooth and lump free putty(c) Material and labour for one coat of waterproofing/ damp proof primer @ 1 ltr per 50 sqft. diluted with 30% by water to be applied using an airless spray machine of with a flow rate of 2 ltr per minute having a pressure of 3300 PSI(d) Allow 4-6 hrs to dry the surface for painting of subsequent coats.(e) Material and labour for two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon additives, with heat Reflectant property which can reduce the painted surface temp. by 5 degree and gives excellent protection against UV attack with VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1L / 50 sqft. diluted with water as per manufacturer instructions applied over priming coat with airless spray machine/ roller of paint application with a flow rate of 2L per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. |
| 10 | Preparation of old plastered surfaces of walls and applying one coat of premium acrylic emulsion on walls (upto 3rd story of bldg), complete all as specified and directed. |
| 11 | Complete removal of old plastered surfaces of walls and applying two coats of premium acrylic emulsion on walls over and including one coat of primer and 1 mm wall care puty including preparation of surface (upto 3rd story of bldg), complete all as specified and directed. |
| 12 | Preparation of old plastered surfaces of ceiling and applying one coat of premium acrylic emulsion on ceiling (upto 3rd story of bldg), complete all as specified and directed. |
| 13 | Preparation of old plastered surfaces of ceiling and applying one coat of white wash on ceiling (upto 3rd story of bldg), complete all as specified and directed. |
| 14 | Preparation of old Plastered or un-plastered surfaces of walls etc by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying two coats of white wash on walls/ old decorated surfaces (upto 3rd story of bldg), complete all as specified and directed by Engineer-in-Charge. |
| 15 | Material & Labour for applying Two coat of floor painting of approved brand and manufacture to give an even shade with glossy finishing including preparation of old surfaces complete all as specified. |
| 16 | Preparation of old or previously treated wooden surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 17 | Preparation of old or previously treated steel and iron surfaces of any description n over 10 cm width or girth and applying one coat of synthetic enamel paint over and including a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. |
| 18 | Preparation of old steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint (over CGI sheeting on roof or any surface of any description) (upto 3rd story of bldg), complete all as specified complete all as specified and directed by Engineer-in-Charge. |
| 19 | Supply only liquid water proofing comound ISI Marked complete all as specified and directed. |
| 20 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high with thick paint to stand out solidly and boldly without showing signs of brush marks complete all as directed Please Enable Macros to View BoQ information |
| 21 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high with thick paint to stand out solidly and boldly without showing signs of brush marks complete all as directed Please Enable Macros to View BoQ information |
