|
| 1 | Schedule A Part-I (B/R) WorksDemolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed. |
| 2 | Material & Labour Brick work with sub class 'B' bricks built in CM 1:6 straight or curved on plan exc 6 m mean radious . and complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 4 | M & L for Rendering 15 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:6 compound finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M & L for Rendering 15 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note:- (i) water proofing compound on only top layer of plaster (ie 5mm thick)(ii) Qty of WPC shall be 200ml per cement bag or per manufacturer instructions (iii) WPC shall be measured and paid separately) |
| 6 | M & L for Supply only liquid water proofing compound complete all as specified and directed. |
| 7 | Material & Labour Preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over one coat of birla white putty 3mm thick preparatory to distempering complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage |
| 8 | Material & Labour for priming new surface of wall with alkal iresistant priming paint of and applying two coats of cement base paint complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage |
| 9 | Taking down Chowkats or frames n. exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed. |
| 10 | Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame) complete all as specified and directed. |
| 11 | Taking down Shutter exceeding 1.0 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed. |
| 12 | Taking down Shutter exceeding 2.0 Sqm each complete all as specified and directed. |
| 13 | Supply & Fix in repair Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs,hinges, lock strike plate, hinges etc complete, size of frame 125x60mm including tarring ends and back of chowkats and lugs including back filling of PCC 1:3:6 for chowkats & PCC 1:2:4 for block for hold fast including two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed. |
| 14 | Supply & Fix in repair 35 mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 15 | Supply & Fix in repair 35mm thick, 2nd class hard wood glazed and skelton shutter, open rebated and prepare to receive glass, gauzed etc(without sash bars) edges of framming plain , chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR PART I Section 8 clause 8.24(a) supplied and fitted to chowkhat complete all as specified and directed. |
| 16 | Supply & Fix in repair 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commerial type of one side and another face is covered with aluminium sheet, 0.5mm thick, fixed with aluminium alloys screws complete all as specified and directed. |
| 17 | Material & Labour preparation of new wooden surfaces over10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed. |
| 18 | Supply & Fix in repair Steel windows/ventilator with tubular frame factory made with double shutter (wire gauged shutter & glass/glazed shutter, (wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, two coats of synthetic enamel paint over one coat of red oxide primer including taking down old windows/ventilators all as specified & as shown on drg .CEUZ/TD/1269/2008 SHT 1/1 to 1/3. and complete all as specified and directed. |
| 19 | Supply and Fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 20 | Supply and Fix in repair Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing including all fittings complete all as specified and directed. |
| 21 | Supply & Fix in repair Floor door stopper of aluminium alloy body and tongue,anodised, with hard drawn steel spring, fixed in floor Door Stopper 140 mm and complete complete all as specified and directed. |
| 22 | Supply & Fix in repair Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 23 | Supply & Fix in repair Aluminium anodised handle extruded section of size 150mm complete all as specified and directed. |
| 24 | Supply & Fix in repair Aluminium anodised handle extruded section of size 125mm complete all as specified and directed. |
| 25 | Supply & Fix in repair 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 26 | Supply & Fix Aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed. |
| 27 | Supply & Fix in repair Aluminium anodised barrel tower bolts extruded section of size 200 mm, complete all as specified and directed. |
| 28 | Supply & Fix in repair Aluminium anodised barrel tower bolts extruded section of size 150 mm, complete all as specified and directed. |
| 29 | Supply & Fix in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 30 | Supply & Fix in repair MS Mortice lock, vertical type, 4 levers of size 75/65 mm complete all as specified and directed. |
| 31 | Supply & Fix in repair Powder coated Anodised aluminium frame(Thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 32 | Supply & Fix in repair Powder coated Anodised aluminium door shutters,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, mortice lock,screws etc. complete all as specified and directed. |
| 33 | Supply & Fix in repair Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed. |
| 34 | Supply & Fix in repair 5.5mm thick plain sheet glass as in window and door shutters with and including rubber gasket and natural colour anodized 15micron snap on aluminium beading/glazing, clips etc complete all as specified and directed. |
| 35 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 36 | Supply & Fix in repair 3 mm thick figured glass pin headed quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed. |
| 37 | Supply & Fix in repair sheet glass ordinary quality 3 mm thick in squares and glazing with oil putty or fixed with bead/ glazing n exc 0.5 sqm each pane and glazing with complete all as specified and directed. |
| 38 | Securing glass of any description in existing glass in metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be Measured ) complete all as specified and directed. |
| 39 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 40 | Demolition of floor concrete in ground floors and Pavings n exc15 cm thickness (below or above 20 ground level) complete all as specified and directed. |
| 41 | Material and Labour for Non - skid coloured eramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified and directed. |
| 42 | Material and Labour for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes and complete all as specified and directed. |
| 43 | Material & Labour vitrified tiles double charged,10 mm thick ,area of each tile exc 0.36 Sqm but n.exc 0.42 sqm, in floor etc set and jointed in neat cement slurry including 15 mm screed bed in CM 1:4 complete all as specified and directed. |
| 44 | M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded crushed stone agg as in levelling coarse under floor complete all as specified and directed. |
| 45 | Material & Labour Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including incl 10mm thick plaster in cm 1:4 complete all as specified and directed. |
| 46 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 47 | Material & Labour Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 48 | Supply & Fix in repair Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 49 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/ blankets/AC boards etc any thickness complete all as specified and directed. |
| 50 | Supply & Fix in repair Anodised aluminium snap grid frame work for false ceiling all as specified. (Size of grid 605 X 605 mm) complete all as specified and directed. |
| 51 | Supply & Fix in repair 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.) fixed in ciiling surface complete all as specified and directed. |
| 52 | Supply & Fix in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 53 | Supply & Fix in repair Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 54 | S & F in repairs 15mm Chromium plated fancy type Bib taps, cast copperalloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 55 | S & F in repair of 15mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipeand fixed (minimum weight 90 gms) complete all as specified and directed. |
| 56 | Supply & Fixed in repairs 15mm fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 57 | S & F in repairs cast aluminium (extruded section body) door closer by hydraulically regulated, designation No.3 univrsal type, suitable for door shutters up to 851mm to 1000 mm in width and of weight between 61 to 80 kg fixed complete all as specified and directed. |
| 58 | S & F in repair GI Elbow/Socket/ Tee of size 15mm bore pipe (including necessary plumbing work) taking up or down GI pipe and refixing at the same position complete all as specified and directed. |
| 59 | Long screw |
| 60 | Socket |
| 61 | elbow |
| 62 | nipple upto 100 mm long |
| 63 | Reducer socket 15/20mm |
| 64 | Reducer socket 25/20mm |
| 65 | Reducer socket 25/15mm |
| 66 | Supply & Fixed in repair GI Elbow/Socket/Tee of size 20 mm bore pipe (including necessary plumbing work) taking up or down GI pipe and refixing at the same position complete all as specified and directed. |
| 67 | Long screw |
| 68 | Socket |
| 69 | elbow |
| 70 | nipple upto 100 mm long |
| 71 | nipple upto 150 mm long |
| 72 | Supply & Fixed in repair 15 mm CP angle cock chrome finish cast copper alloy, with wall flange complete all as specified and directed. |
| 73 | S&F in repair Stop valves, cast copper alloy, screwed down, high pressure, with capstan head, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore, fixed in repairs complete all as specified and directed. |
| 74 | S & F in repairs grating doom 125mm dia with waste hole of PTMT fixed on floor/nahani trap with cement mortar, fixed (Minimum weight 40 gms) complete all as specified and directed. |
| 75 | Supply & Fixed in repairs CP Brass shower rose 125mm of size with or with out swivel joints any size including fixing to steel pipe or union as fixed complete all as specified and directed. |
| 76 | Supply & Fix 600mmx450mm bevelled edge mirror of selected quality glass ,mounted on 6mm thick AC building board or commercial plywood ,PVC moulded frame and fixed to wooden plugs with cp brass screws and cup washers as fixed in repairs complete all as specified and directed. |
| 77 | Supply & Fix in repair PVC connections 15mm size 600 mm long as fixed complete all as specified and directed. |
| 78 | Supply & Fixed in repairs brass float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to iron pipe of bore 20mm complete all as specified and directed. |
| 79 | Supply & Fixed in repairs brass float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to iron pipe of bore 15mm complete all as specified and directed. |
| 80 | Dismantling water tanks and removing to store capacity exceeding 250 ltrs and not exceding 500 ltrs complete all as specified and directed. |
| 81 | Dismantling water tanks and removing to store capacity exceeding 500 ltrs and not exceding 1000 ltrs complete all as specified and directed. |
| 82 | Supply & Fix in repair rotational moulded PVC water tank Triple layered (Cylindrical vertical with closed top) 1000 ltrs capacity hoisted and fixed in positoin all as specified in SSR part I complete all as specified and directed. |
| 83 | Supply & Fix in repair rotational moulded PVC water tank Triple layered (Cylindrical vertical with closed top) 500 ltrs capacity hoisted and fixed in positoin all as specified in SSR part I complete all as specified and directed. |
| 84 | Supply & Fixed in repairs PVC body valve less syphonic action type flushing cistern white low level with inlet ball valve float and handle including brackets 10 lits capacity with 32mm dia PVC bend pipe for low level cistern complete all as specified and directed. |
| 85 | Supply & Fixed in repairs vitreous china pedestal pattern type white wash down water closet pan with Antimicrobial Solid Seat Cover but excluding flushing cistern and flush pipe complete all as specified and directed. |
| 86 | Supply & Fixed in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests complete all as specified and directed. |
| 87 | Supply & Fixed in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 88 | Supply & Fixed in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor of 110 mm bore inclding dismantling of old U/S pipes complete all as specified and directed. |
| 89 | Supply & Fixed in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor of Bore 75 mm inclding dismantling of old U/S pipes complete all as specified and directed. |
| 90 | Supply & Fixed in repair PVC (SWR) bends 75 mm dia radius complete all as specified and directed. |
| 91 | Supply & Fixed in repair PVC (SWR) bends 110 mm dia radius complete all as specified and directed. |
| 92 | S & F in repairs 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed. |
| 93 | Supply & Fixed in repair PVC (SWR) bends with access door of 75 mm dia radius complete all as specified and directed. |
| 94 | Supply & Fixed in repairs PVC (SWR) bends with access door of 110 mm dia radius complete all as specified and directed. |
| 95 | S & F in repair PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110mm bore complete all as specified and directed. |
| 96 | Supply & Fixed in repairs PVC (SWR) vent cowl 110 mm dia complete all as specified and directed. |
| 97 | Supply & Fixed in repairs 32mm dia waste coupling of PTMT (minimum weight 45 gms) with PVC waste pipe for WHB/urinal 750mm long complete.(Makes as approved).complete all as directed by the Eng-in-Charge |
| 98 | S&F in repair vitreous china wash basin , white flat back size 550x400mm excluding chain and plug and porcelain stopper but including brackets, including 32mm bore CP based fittings and PVC waste pipe suitable for 32mm bore complete all as specified and directed. |
| 99 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed. |
| 100 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed. |
| 101 | S& F in repair 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 102 | S & F in repair 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 103 | Supply and fixing in repair of Brass chromium plated 15mm wall mixer for mixing hot and cold water,screwed down for iron pipe and fixed complete all as specified and directed. |
| 104 | Supply and Fixing in repairs Health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated complete all as specified and directed. |
| 105 | S & F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed in repairs complete all as specified and directed. |
| 106 | M & L for Rendering 10mm thick in CM 1:3 as in ceilings or concrete surfaces such as chajjas, upward facia, downward facias and similar items finished even and smooth including dubbing coat without using extra cement complete all as specified and directed. |
| 107 | M & L for Preparation of newly plastered surfaces of ceilling,upward facias etc and applying three coats of white wash complete all as specified and directed. |
| 108 | M &L for 3mm thick wall care putty on wall complete all as specified and directed.Note: The putty is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 109 | M & L for Preparation of old decorated surface of wall including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots and applying One coat of Oil Bound Distemper complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 110 | M&L for Preparation of old decorated surface of wall including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots and applying two coat of Oil Bound Distemper on wall complete all as specified and directed.Note: The putty is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 111 | M&L for Preparation of old decorated surface including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots and applying two coat of cement base paint on wall complete all as specified and directed.Note: The putty is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 112 | M&L for Preparation of old decorated surface including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots and applying one coat of cement base paint on wall complete all as specified and directed.Note: The putty is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 113 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick plaster of paris putty including necessary scaffolding etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no clain on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. |
| 114 | M&L for Preparing Old steel painted surface to receive painting, including washing and cleaning, etc. over 10cm in width or girth, not otherwise described & applying one coats of synthetic enamel paint in any pattern complete all as specified and directed. |
| 115 | M&l for Preparing Old wood and wood based surface to receive painting, including washing and cleaning, etc. over 10cm in width or girth, not otherwise described & applying one coat of synthetic enamel paint complete all as specified and directed. |
| 116 | Supply & Fix in repair bore of trap in 32mm brass chromium plated trap 'P' or 'S' pattern for wash basins and sinks with inlet and outlet , screwed for pipe or connections and with one cleaning cap complete all as specified and directed. |
| 117 | Supply & Fix in repair bore of trap in 40mm brass chromium plated trap 'P' or 'S' pattern for wash basins and sinks with inlet and outlet , screwed for pipe or connections and with one cleaning cap and fixed complete all as specified and directed. |
| 118 | Supply & Fix in repair 75mm diaPVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 119 | S&F in repair Vitreous China Urinal bowl type or half stall pattern , white including flush pipe and waste pipe) including Spreader and other accessories and Bracket with fixing arrangement complete all as specified and directed. |
| 120 | S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 gms ) complete all as specified and directed. |
| 121 | Supply & Fixed in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 122 | Supply & Fixed in repair Shelf of PTMT fixed with including chromium plated brass screw and wooden/plastic cleats (Minimum weight 300 gms ) complete all as specified and directed. |
| 123 | S&F in repair for aluminium Door Seals width 28mm with gasket, 1.5mm thick, fixed in doors in position conform to design complete all as specified and directed. |
| 124 | Writing letters or figures (Block, Roman, Italic or Indian) n exc. 30cm high complete all as specified and directed. |
| 125 | Stops, Commas, short lines, dashes, hyphens, brackets etc complete all as specified and directed. |
| 126 | Obliterating old writing of any description n.exc 0.1 Sqm with paint to match existing work complete all as specified and directed. |
| 127 | Making arrangements of scaffolding in building,cuting of small trees/plants, at stem removal of the roots of the plants by using acids, cutting around the spots for removing the roots any size and making good with cement motar1:3 with PCC1:2:4 including finishing with existing complete all as specified and directed.Note: 1. The schedule rates include collecting of complaints from the concerened JE and returning done complaints at the earliest.2. The quantities are tentative and are liable to change as per day to day complaints .3. The Quantities are to be executed in day to day complaints and can not be explained at the time of handing over of site. Please Enable Macros to View BoQ information |
| 128 | Making arrangements of scaffolding in building,cuting of small trees/plants, at stem removal of the roots of the plants by using acids, cutting around the spots for removing the roots any size and making good with cement motar1:3 with PCC1:2:4 including finishing with existing complete all as specified and directed.Note: 1. The schedule rates include collecting of complaints from the concerened JE and returning done complaints at the earliest.2. The quantities are tentative and are liable to change as per day to day complaints .3. The Quantities are to be executed in day to day complaints and can not be explained at the time of handing over of site. Please Enable Macros to View BoQ information |
