|
| 1 | राजकीय कॉलेज ऑफ नर्सिग अलवर में मरम्मत कार्य। |
| 2 | P & F Automatic Flushing Cistern of first quality (IS : 774mark) of approved make fitting, siphon with copper tube, C.I.brackets complete including cutting and making good the wall.WVC (as per IS : 2556) 10 litres. |
| 3 | Providing and fixing Horizontal blinds /Venation blind shallbe cold rolled formed U shape 23 mm high x 25 mm wide withflanged edges. It shall be made of heavy gaze 0.56 mmgalvanized steel, Slates shall be made of virgin Al. alloy(having 3.5 – 4.5% of Mg. Content of width 25 mm. The slatshall have dust guard paint coating, the chord lock shall be ofthick tomized steel and shall be securely attach in the headrail. It shall provide locking arrangement of the cord. Tilt rodshall be made of galvanized steel it shall have a D shaped withan average cross section with diameter of 6 mm to achieveminimum torsional deflection |
| 4 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm diaG.I. waste pipe, dome waste couplings, concealed ironbrackets or screws etc complete. Flat Back (small) size 456x355x265mm. |
| 5 | P & F W.V.C. Urinal Partition Plate of approved standardmake of size 630x315mm including making good the wall |
| 6 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 510 mm x 400 mm |
| 7 | Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement: 4 coarse sand) jointing with white cement mortar 1:2 (1 whitecement : 2 marble dust) with pigment to match the shade of themarble slab including grinding, rubbing and polishingcomplete Bhaislana,Abu,Kishangarh Zebra (Black Marble) up to 1500 Cm2 Tiles |
| 8 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 9 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work. |
| 11 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Old work (One or more coats ) |
| 12 | Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 4 mm |
| 13 | Providing and fixing Granite stone slab mirror polished andmachine edge cut in walls, pillars, steps, Shelves, SillsCounters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Rajasthan Black |
| 14 | Repair to damaged cement plaster of stone chajja with CM 1 :3 of required thickness on top & bottom as per existingpattern and making patta etc complete up to three floor level asper direction of Engineer in charge including all necessaryscoffolding etc |
| 15 | Cement concretee flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate |
| 16 | Colour washing of all shades to give an even shade including all scaffolding : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing ). |
| 17 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete Old Plastered Surface (two or more coats) |
| 18 | Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 19 | P & F Indian type white glazed vitreous china 1st quality W.C.orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor:Size 530x410mm. |
| 20 | Painting exterior surface of Wall with 100% acrylic exteriorpaint of approved brand and manufacture to give an evenshade with two or more coats including prepartion of basewith sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision Old Work |
| 21 | Grinding of existing floor with 120 and 360 No. Carborundum stone including cost of wax polishing complete |
| 22 | P & F 1st quality Heavy Duty Vitrified glazed MAT tiles onfloor, skirting and steps etc.in different sizes (thicknessminimum 10mm) with water absortion less than or equal0.08% and conforming to IS 15622 of approved make in allcolour and shade, laid with 20 mm thick CM 1: 4 includinggrounting the joints with white cement and matching pigmentetc complete.size 600 mm X 600 mm |
| 23 | Providing and fixing of uPVC Sliding windows: Frame Madefrom the Extruded uPVC Window Profile Section of size106w x 50h mm having outer wall thickness of 2.5mm (+/-0.2mm) and 3 box multi-chamber construction, White infinish, duly reinforced with 1.2 mm thick GI section. Frameshall have three track configuration, Vertical member of framewhich bears the sliding shutter load shall have aluminiumrail/track for smooth sliding of shutter rollers. All the fourcorners shall be mitered cut & thermal welded so as to formwindow frame. Frame shall be milled with drain and airequalizer hole in order to be water tight and for drainage ofaccumulated water, if any, to outer side.Shutter : The shutter of sliding window shall be made of 39wx 69h mm Extruded 3 box multi- chamber uPVC WindowProfile Section of white colour having outer wall thickness of2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mmthick GI section duly mitered cut & thermal welded at allcorners and fitted with uPVC glazing bead of size 22 x 20 mmwith inner and outer co-extruded EPDM/TPE-E weather sealgaskets alongwith 6mm thick ISI make plain float glass. |
| 24 | Providing and fixing 1st quality standard white, grey, ivory,fume red brown, light green, light blue and other light shadesglazed tiles confirming to IS : 13753 & IS :15622 of size200mm x 300mm in walls, floors, steps, pillars etc. laid on abed of neat cement slurry finished with flush pointing in thewhite cement mixed with pigment to match the shade of thetile complete (excluding the cost of cement plaster on wallsand pillar |
| 25 | Kota stone slab flooring 25 mm thick over 20 mm (average)thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab includingrubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)For area of each slab from 901 to 2000 Sq.Cm |
| 26 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes (IS 15778 : 2007 code) having thermal stability for hot& cold water supply including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 mspacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases andmaking good the same including testing of joints complete asper direction of Engineer in Charge. (Concealed workincluding cutting chases and making good the walls etc.,) 15 mm nominal size |
| 28 | Plaster on new surface on walls in cement sand mortar 1:6including racking of joint etc. complete fine finish |
| 29 | Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. Please Enable Macros to View BoQ information |
