|
| 1 | Providing, fabricating, erecting in position and testing/examining bolted and/or welded STRUCTURAL STEEL WORKS at all levels and locations, including all type of sections , builtup sections / compound sections and/ or plates/bent plates (including supplying, fabricating, fixing and keeping in position at all levels and locations, threaded anchor bolts of all diameters and nomenclature, including nuts, washers, anchor plates, pipe sleeves etc. in foundations. Columns etc ) in trusses, purlins, wind ties, wind girders, columns, portals, racks, portals, bracings, platform, staircases , ladders, stoppers, side runners, sag rods, hand rails etc including transporting to site , storing, cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/ welding of joints, ( including sealing the joints of box sections with continuous welding, finishing edges by grinding, fixing in line and level with temporary staging and bracing and removal of the same after erection, grouting with free flow non-Shrink Grout including preparation and submission of detailed fabrication drawing, preparing the surface for painting and applying one coat of shop primer complete as specified and directed by trhe E.I.C. ( ALL REQUIRED MATERIALS SHALL BE SUPPLIED BY THE AGENCY AT THEIR OWN COST. ) | Providing, fabricating, erecting in position and testing/examining bolted and/or welded STRUCTURAL STEEL WORKS at all levels and locations, including all type of sections , builtup sections / compound sections and/ or plates/bent plates (including supplying, fabricating, fixing and keeping in position at all levels and locations, threaded anchor bolts of all diameters and nomenclature, including nuts, washers, anchor plates, pipe sleeves etc. in foundations. Columns etc ) in trusses, purlins, wind ties, wind girders, columns, portals, racks, portals, bracings, platform, staircases , ladders, stoppers, side runners, sag rods, hand rails etc including transporting to site , storing, cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/ welding of joints, ( including sealing the joints of box sections with continuous welding, finishing edges by grinding, fixing in line and level with temporary staging and bracing and removal of the same after erection, grouting with free flow non-Shrink Grout including preparation and submission of detailed fabrication drawing, preparing the surface for painting and applying one coat of shop primer complete as specified and directed by trhe E.I.C. ( ALL REQUIRED MATERIALS SHALL BE SUPPLIED BY THE AGENCY AT THEIR OWN COST. ) |
| 2 | Installation , supply and testing of 40W LED PANEL LIGHT fixture Cat No.VL/PNL-102-LED04057(Venture Make) OR equivelant i.e of make Bajaj/C&S/HPL/SYSKA required cable of 2.5sqqmm 4C flecible TRS cable and other hard wares required for installation and testing shall be under the scope of the party | Installation , supply and testing of 40W LED PANEL LIGHT fixture Cat No.VL/PNL-102-LED04057(Venture Make) OR equivelant i.e of make Bajaj/C&S/HPL/SYSKA required cable of 2.5sqqmm 4C flecible TRS cable and other hard wares required for installation and testing shall be under the scope of the party |
| 3 | Supply, installation and testing of 9W LED PANEL LIGHT fixture Cat No.VL/PNLS-401-LED0957(Venture Make)OR equivelant i.e of make Bajaj/C&S/HPL/SYSKA | Supply, installation and testing of 9W LED PANEL LIGHT fixture Cat No.VL/PNLS-401-LED0957(Venture Make)OR equivelant i.e of make Bajaj/C&S/HPL/SYSKA |
| 4 | Installatoin, supply ,testing and commissioning of prewired wall/ceiling/false ceiling mounted LED light fixture complte including providing 2 nos of wood / PVC round blocks for fixing the fitting and down rod as required, and supply and laying of 3cx1.5 sqmm flexable copper cable as required and as per direction of Engineer-in-Charge. (18W TUBE LIGHT FIXTURE) | Installatoin, supply ,testing and commissioning of prewired wall/ceiling/false ceiling mounted LED light fixture complte including providing 2 nos of wood / PVC round blocks for fixing the fitting and down rod as required, and supply and laying of 3cx1.5 sqmm flexable copper cable as required and as per direction of Engineer-in-Charge. (18W TUBE LIGHT FIXTURE) |
| 5 | Installation and supply , testing and commissioning of MDB as per the following specification including termination of incoming and out going cable/conduits/PVC pipes/wires,required earth commection ,glanding with supply of glands suitable for 3.5x50sqmm AL,AR cable complete including transportation , labour, sundry material like rag bolt, cement ETC.As required and as per the direction of EIC. SPECIFICATION : PRE WIRED TPN DB , INCOMER : 100A TPN DB, OUT GOING: 15 NO DP LOAD CONTACT MCB OF 40A RATING , BUS BAR 1 SET WITG SUITABLE EARTH LINK WITH ALL COMPONETS FOR OUT GOING FEEDER. Dismantling of old MDB if require shall be under the scope of the PARTY. | Installation and supply , testing and commissioning of MDB as per the following specification including termination of incoming and out going cable/conduits/PVC pipes/wires,required earth commection ,glanding with supply of glands suitable for 3.5x50sqmm AL,AR cable complete including transportation , labour, sundry material like rag bolt, cement ETC.As required and as per the direction of EIC. SPECIFICATION : PRE WIRED TPN DB , INCOMER : 100A TPN DB, OUT GOING: 15 NO DP LOAD CONTACT MCB OF 40A RATING , BUS BAR 1 SET WITG SUITABLE EARTH LINK WITH ALL COMPONETS FOR OUT GOING FEEDER. Dismantling of old MDB if require shall be under the scope of the PARTY. |
| 6 | Installation and supply of complete chemical earthing system, making of earth pits including excavation in hard soil of size 10 ft. X 2 ft. X 2 ft. Or 6\\"dia x10 feet depth drill hole, resurfacing with black cotton soil, including supply of high conductive rust free copper coated earth electrode, special earth enhancement compound (minimum 50 kg), electrode clamp, copper strip for connection between earth pit and equipment, complete with brick chamber and RCC cover.(Make-Erico, OBO Betterman. | Installation and supply of complete chemical earthing system, making of earth pits including excavation in hard soil of size 10 ft. X 2 ft. X 2 ft. Or 6\\"dia x10 feet depth drill hole, resurfacing with black cotton soil, including supply of high conductive rust free copper coated earth electrode, special earth enhancement compound (minimum 50 kg), electrode clamp, copper strip for connection between earth pit and equipment, complete with brick chamber and RCC cover.(Make-Erico, OBO Betterman. |
| 7 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2.5 sq.mm FRLS PVC insulated copper conductor multi strand cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2.5 sq.mm FRLS PVC insulated copper conductor multi strand cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 8 | Sub-main circuit wiring: Supply and laying of multistrand copper wire of approved quality inside 25 MM independent black PVC conduit pipe 2\\" height PVC JB with 1 run of 2.5 Sqmm copper wire(Green colour) as continuous earth. The job includes termination of both ends through proper jointing materials. All the materials shall be supplied by the party. The work shall be carried out as direction of Engineer-in-Charge. | Sub-main circuit wiring: Supply and laying of multistrand copper wire of approved quality inside 25 MM independent black PVC conduit pipe 2\\" height PVC JB with 1 run of 2.5 Sqmm copper wire(Green colour) as continuous earth. The job includes termination of both ends through proper jointing materials. All the materials shall be supplied by the party. The work shall be carried out as direction of Engineer-in-Charge. |
| 9 | Supplying and fixing of following modular switch/ socket on the existing modular plate and switch biox including connections as required | Supplying and fixing of following modular switch/ socket on the existing modular plate and switch biox including connections as required |
| 10 | Consealed wireing to 15Amps plug point with 6 sqmm Multistrand PVC insulated single core copper conductor in recessed medioum class conduit with one run of 2.5sqmm copper wire for loop earthing as required / as directed by EIC. | Consealed wireing to 15Amps plug point with 6 sqmm Multistrand PVC insulated single core copper conductor in recessed medioum class conduit with one run of 2.5sqmm copper wire for loop earthing as required / as directed by EIC. |
| 11 | Laying and supply of PVC insulated and PVC sheathed 1.1KV grade aluminium power cable conforming to IS:1554 on excavted trench, direct on wall through pipes etc. as per direction of Engineer-in-charge. CABLE SIZE : 3.5CX50SQMM AYFY | Laying and supply of PVC insulated and PVC sheathed 1.1KV grade aluminium power cable conforming to IS:1554 on excavted trench, direct on wall through pipes etc. as per direction of Engineer-in-charge. CABLE SIZE : 3.5CX50SQMM AYFY |
| 12 | Excavating trenches 800 x 400mm wide for laying of cable, supply and filling of sand 75mmbelo and 75mm above the cable with brick protection on three side of the cable, backfilling the trench and restoring to original safe, disposing the surplus earth to outside premises in all as in all kinds of soil. | Excavating trenches 800 x 400mm wide for laying of cable, supply and filling of sand 75mmbelo and 75mm above the cable with brick protection on three side of the cable, backfilling the trench and restoring to original safe, disposing the surplus earth to outside premises in all as in all kinds of soil. |
| 13 | Installation, supply testing and commissioning of 1200mm sweep 220/240 Volt ceiling fan including fan hook, suspension rod of required length, earthing, electronic regulator including supply and laying of 3cx2.5 Sqmm Flexable copper wire as required and asper direction of the Engineer-in-Charge. | Installation, supply testing and commissioning of 1200mm sweep 220/240 Volt ceiling fan including fan hook, suspension rod of required length, earthing, electronic regulator including supply and laying of 3cx2.5 Sqmm Flexable copper wire as required and asper direction of the Engineer-in-Charge. |
| 14 | Installation and supply of earthing strips 25x3mm along trenches including excavation, cutting and fixing to wall, embedding inside walls and floors welding at joints, providing anti-corrosive paints of bitumin and jute covering for welding, clamping, necessary hardware for connection etc. including all labour and material complete as required and as per direction of Engineer-in-Charge. | Installation and supply of earthing strips 25x3mm along trenches including excavation, cutting and fixing to wall, embedding inside walls and floors welding at joints, providing anti-corrosive paints of bitumin and jute covering for welding, clamping, necessary hardware for connection etc. including all labour and material complete as required and as per direction of Engineer-in-Charge. |
| 15 | Supply intslation testing of 32A TPN with suitble enloseure with TPN socket | Supply intslation testing of 32A TPN with suitble enloseure with TPN socket |
| 16 | Supply, installation, testing and commissioning of 300mm sweep 240 Volt Exhaust fan including making holes on walls providing necessary brackets/support for fixing the fan, making necessary connections, poroviding gravity drop louvers etc. finishing the hole necessary civil works as required and as per the direction of Engineer-in-Charge. | Supply, installation, testing and commissioning of 300mm sweep 240 Volt Exhaust fan including making holes on walls providing necessary brackets/support for fixing the fan, making necessary connections, poroviding gravity drop louvers etc. finishing the hole necessary civil works as required and as per the direction of Engineer-in-Charge. |
| 17 | Supply, installation , testing and commissioning of prewired wall mounted 90W LED street light fixture with supporting assoceries including providing and fixing of GI bend pipe approximate 1.5meter length with junction boxes etc as required and as per the direction of EIC | Supply, installation , testing and commissioning of prewired wall mounted 90W LED street light fixture with supporting assoceries including providing and fixing of GI bend pipe approximate 1.5meter length with junction boxes etc as required and as per the direction of EIC |
| 18 | Installation & Supply of out door type feeder pillar with Minimum 2mm thick sheet steel with proper corner, base support Etc. Box size: 1000(l) x 500(d) x 1100(h) mm. (approx.) wall konted with grout plate bolting facility.-should have bottom cable entry facility -should have double Door with gasket & universal lock, and extra lock Provision at center. – The feeder pillar should have with following specification. Dismantling of Old feeder pillar if required shall be under the scpe of the contractor. | Installation & Supply of out door type feeder pillar with Minimum 2mm thick sheet steel with proper corner, base support Etc. Box size: 1000(l) x 500(d) x 1100(h) mm. (approx.) wall konted with grout plate bolting facility.-should have bottom cable entry facility -should have double Door with gasket & universal lock, and extra lock Provision at center. – The feeder pillar should have with following specification. Dismantling of Old feeder pillar if required shall be under the scpe of the contractor. |
| 19 | Installation of feeder pillar , job involves making of foundation with supply of all nut and bolts and masonary works and dismantling of old feeder pillar if requires | Installation of feeder pillar , job involves making of foundation with supply of all nut and bolts and masonary works and dismantling of old feeder pillar if requires |
