Tender For Construction Of Cyber Cell Thana In Distt. Shamli In. F.Y. 2025-26, Shamli-Uttar Pradesh

TDR : 55743436

Tender Notice
BOQ

4 Days Left

Shamli , Uttar Pradesh

Tender Brief : Tender For Construction Of Cyber Cell Thana In Distt. Shamli In. F.Y. 2025-26

Document Fees
₹ 2714 /-

EMD
₹ 1400000.0 /-

Tender Value
₹ 2.40 Crore /-

Submission Date
05-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer in charge. All kinds of soil 0 to 0.30 m. DSR No. 2.6.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
2	Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.. DSR No. 2.25(a) I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
3	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.. DSR No. 2.27 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
4	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). DSR No. 4.1.8 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
5	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR No. 5.1.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
6	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.. DSR No. 5.22.6 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
7	Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. DSR No. 5.9.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
8	Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers. DSR No. 5.9.5 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
9	Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts. DSR No. 5.9.6 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
10	Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.. DSR No. 4.13 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
11	Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the coloumn pitswall tench basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surrounding of pipes and conduits etc.complete(plinth area of the building at ground floor only shall be measured as per I.S.6313(Part ll 1981) aldrine emulsifiable concrete or any other approved material such as hepthachlor or chlordance will be used.The rate of application of chemical emulsion shall be as follows:-(1)treatment for masonary & foundation 5 litres per sq.m.(2)back fill in immediate contract with foundation 7.5 litre per sq.m(3)treatment of top surface of plinth filling 5 liters per sq.m.(4)treatment of soil along external parameter of building 7.50 lire per sqm. (For payment plinth area to be measured as per IS Code).. DSR No. 2.35.3.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
12	Brick Work with common burnt clay ( non modular) bricks of class - 150 in foundation and plinth in: Cement mortar 1:6 ( 1 cement : 6 coarse sand). DSR No. 6.1.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
13	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR No. 5.2.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
14	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).. DSR No. 5.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
15	Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform. DSR No. 5.9.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
16	Centering and shuttering including strutting, propping etc. and removal of form for : Weather shade, Chajjas, corbels etc., including edges. DSR No. 5.9.19 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
17	Brick Work with common burnt clay ( non modular) bricks of class - 150 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 ( 1 cement : 6 coarse sand). DSR No. 6.4.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
18	Half brick masonary with common burnt clay ( non modular) bricks of class - 150 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand). DSR No. 6.13.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
19	Providing and fixing bright /matt finished Stainless Steel sliding door bolts of approved quality & make with necessary screws etc all complete. 250mm x 16mm . I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
20	Providing and fixing bright /matt finished Stainless Steel tower bolts of approved quality & make with necessary screws etc all complete. 250mm x 10mm . I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
21	Providing and fixing bright /matt finished Stainless Steel tower bolts of approved quality & make with necessary screws etc all complete. 150mm x 10mm . I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
22	Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm. DSR No. 9.165.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
23	Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 100 mm. DSR No. 9.165.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
24	Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. DSR No. 14.34 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
25	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete.. DSR No. 9.84 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
26	Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). DSR No. 10.15.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
27	Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes. DSR No. 10.30.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
28	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR No. 9.21.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
29	Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).. DSR No. 9.26 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
30	Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick. DSR No. 9.127.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
31	Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).. DSR No. 9.23 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
32	Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.. DSR No. 10.31 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
33	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces. DSR No. 10.5.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
34	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. DSR No. 10.25.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
35	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).. DSR No. 10.28 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
36	Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. DSR No. 10.29.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
37	Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :With average thickness of 120 mm and minimum thickness at khurra as 65 mm.. DSR No. 22.7.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
38	15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand). DSR No. 13.5.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
39	12 mm thick plaster with cement mortar in consisting of 1:6 cement and approved coarse sand. On smooth surface of wall.. DSR No. 13.4.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
40	6 mm cement plaster of mix : 1:3 (1 cement : 3 coarse sand). DSR No. 13.16.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
41	15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand). DSR No. 13.5.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
42	Add for groove in plastered surface or moulding to R.C.C. projections. DSR No. 5.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
43	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sgm including pointing the joints with white cement and matching pigment etc., complete.. DSR No. 11.37 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
44	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.. DSR No. 8.31 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
45	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of sizeSize of Tile 600 x 600 mm. DSR No. 11.41A.3.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
46	Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm. DSR No. 11.47 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
47	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent. DSR No. 11.56.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
48	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. DSR No. 11.26.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
49	Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.. DSR No. 11.27 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
50	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm. DSR No. 8.2.2.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
51	Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement. DSR No. 11.20.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
52	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer. DSR No. 13.41.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
53	Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). DSR No. 13.47.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
54	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.. DSR No. 13.8 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
55	Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. DSR No. 13.48.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
56	Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.. DSR No. 12.22 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
57	Supplying and filling with O.B.B. Balast filing in sunken area I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
58	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. . DSR No. 22.5 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
59	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth. DSR No. 4.17 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
60	Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).. DSR No. 6.44 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
61	Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm. DSR No. 22.23.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
62	Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm.. DSR No. 22.23.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
63	Providing & fixing 12 mm thick frameless toughened glass door shutter of approved brand & manufacture, including providing & fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement, and making necessary holes etc for fixing required door fittiings all complete as per direction of engineer-in-charge (Door Handle, lock & stopper etc. to be paid seperately). DSR No. 21.18 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
64	Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness. DSR No. 21.4.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
65	Providing and fixing bright /matt finished Stainless Steel D Type handles of approved quality & make with necessary screws etc all complete. 600 mm long 25 mm dia. DSR No. MR I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
66	Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.. DSR No. 10.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
67	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.. DSR No. 17.1.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
68	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid . DSR No. 17.2.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
69	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. DSR No. 17.7.4 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
70	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern. DSR No. 17.4.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
71	Providing & fixing stone slab table rubbed, edges rounded and polished of size 75 X 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size) as per Engineer-in-charge and finished smooth Granite stone of approved shade. DSR No. 8.10.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
72	Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.. DSR No. 8.5 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
73	Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe i) 32 mm dia. DSR No. 17.28.2.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
74	Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.. DSR No. 17.70.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
75	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia. DSR No. 17.32.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
76	Providing and fixing toilet paper holder : C.P. brass. DSR No. 17.34.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
77	Supply and fixing of UPVC S.W.R. pipe type -B confirming to IS- 13592 including jointing the pipes with rubber ring, lubricant and UPVC SWR cuplar confirming to IS - 14735. Also including excavation of trenches cutting of walls and holes and repairing the walls floors and refilling the trenches as before but excluding supply and cost of other fittings such as elbow, bead, tee and Y-tee including supply of all material labour and T&P .Required for proper completion of the work. 90 mm O.D. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
78	Supply and fixing of UPVC S.W.R. pipe type -B confirming to IS- 13592 including jointing the pipes with rubber ring, lubricant and UPVC SWR cuplar confirming to IS - 14735. Also including excavation of trenches cutting of walls and holes and repairing the walls floors and refilling the trenches as before but excluding supply and cost of other fittings such as elbow, bead, tee and Y-tee including supply of all material labour and T&P .Required for proper completion of the work. 110 mm O.D. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
79	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 35 mm. DSR No. 12.43.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
80	Supply and fixing of UPVC S.W.R. door bend confirming to IS- 14735 90 mm size I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
81	Supply and fixing of UPVC S.W.R. door bend confirming to IS- 14735, 110 mm size I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
82	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°, 75 mm Shoe. DSR No. 12.42.5.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
83	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°, 110 mm Shoe. DSR No. 12.42.5.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
84	Supply and fixing of UPVC S.W.R. Plain Tee confirming to IS- 14735, 90x90x90 mm size I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
85	Supply and fixing of UPVC S.W.R. Plain Tee confirming to IS- 14735, 110x110x110 mm size I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
86	Supply and fixing of UPVC S.W.R. Plain bend confirming to IS- 14735, 90 mm size I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
87	Supply and fixing of UPVC S.W.R. Plain bend confirming to IS- 14735, 110 mm size I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
88	Supply and fixing of UPVC S.W.R. Door Y confirming to IS- 14735, 90 mm size I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
89	Supply and fixing of UPVC S.W.R. Door Y confirming to IS- 14735, 110 mm size I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
90	Supply and fixing of UPVC S.W.R. Cowel confirming to IS- 14735, 90 mm size I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
91	Supply and fixing of UPVC S.W.R. Cowel confirming to IS- 14735, 110 mm size I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
92	Supply and fixin g of UPVC S.W.R. Nahni trap size 100/75mm, 100/90mm confirming to IS - 14735 self cleannig design fixed in PCC 1:2:4 and supply and fixing of 125mm dia heavy duty CP brass jali. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
93	Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms.. DSR No. 17.71 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
94	Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms. DSR No. 17.72 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
95	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall, 20 mm nominal outer dia pipes. DSR No. 18.10.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
96	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall, 25 mm nominal outer dia pipes. DSR No. 18.10.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
97	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall, 40 mm nominal outer dia pipes. DSR No. 18.10.5 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
98	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 15 mm nominal outer dia pipes. DSR No. 18.8.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
99	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes. DSR No. 18.8.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
100	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm nominal outer dia Pipes . DSR No. 18.7.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
101	Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 25mm dia, nominal bore. DSR No. 18.17.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
102	Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 32 mm dia, nominal bore. DSR No. 18.17.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
103	Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc. 40mm nominal bore.. DSR No. 18.17.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
104	Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 50 mm dia, nominal bore. DSR No. 18.17.4 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
105	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore. DSR No. 18.13.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
106	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore. DSR No. 18.13.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
107	Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore. DSR No. 18.21.2.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
108	Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls) 20 mm nominal outer dia pipes. DSR No. 18.38.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
109	Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls) 25 mm nominal outer dia pipes. DSR No. 18.38.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
110	Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls) 32 mm nominal outer dia pipes. DSR No. 18.38.5 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
111	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore. DSR No. 18.18.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
112	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore. DSR No. 18.18.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
113	Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931, 15mm nominal bore. DSR No. 18.49.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
114	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. 15 mm nominal bore . DSR No. 18.53.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
115	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.. DSR No. 17.16A I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
116	Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.. DSR No. 2.10.1.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
117	Supply and fixing of UPVC S.W.R. pipe type -B confirming to IS- 13592 including jointing the pipes with rubber ring, lubricant and UPVC SWR cuplar confirming to IS - 14735. Also including excavation of trenches cutting of walls and holes and repairing the walls floors and refilling the trenches as before but excluding supply and cost of other fittings such as elbow, bead, tee and Y-tee including supply of all material labour and T&P .Required for proper completion of the work. 160 mm O.D. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
118	Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 160/150 mm diameter pipe. DSR No. 19.2.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
119	Supply and fixing of UPVC S.W. R. Gully trap confirming to IS - 14735 size 150x110 mm dia of self cleaning design including fixed brick Masonary chamber 250x250x250mm Size i/ c supply and fixing of CI cover with frame weight not less then 4.50Kg. & CI grating 150x150mm complete in all respects. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
120	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Fisnihed with a floating coat of neat cement complete as per standard design : (a) Inside size 900 x 800mm and 500mm deep including C.I. Cover frame.. DSR No. 19.7.1.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
121	Supply and fixing of UPVC S.W. R. Gully trap confirming to IS - 14735 size 150x110 mm dia of self cleaning design including fixed brick Masonary chamber 250x250x250mm Size i/ c supply and fixing of CI cover with frame weight not less then 4.50Kg. & CI grating 150x150mm complete in all respects. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
122	Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. In all kind of soil. (For 1.5 m to 3.0 m).. DSR No. 2.6.1 + 2.26.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
123	Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. In all kind of soil. (For 3.0 m to 3.3 m).. DSR No. 2.6.1 + 2.26.1x2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
124	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All types of soil 400 mm dia. DSR No. 23.1.1.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
125	Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well casing(CM) pipe of required dia, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia. DSR No. 23.3.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
126	Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, onforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia. DSR No. 23.4.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
127	Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.. DSR No. 23.5 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
128	Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.. DSR No. 23.6 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
129	Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.. DSR No. 23.7 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
130	Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin- charge.. DSR No. 23.8 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
131	Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in pproved laboratory, i/c disinfection of ubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per uirement and direction of Engineer-in-charge.. DSR No. 23.12 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
132	Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia. DSR No. 23.13.3 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
133	Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 150 mm dia. DSR No. 23.15.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
134	Providing, laying and jointing P.V.C. pipes including testing of joints etc. complete : 150 mm dia pipe 6 KG. DSR No. AR I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
135	Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. DSR No. 19.30.3.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
136	Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. DSR No. 19.27.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
137	Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster. DSR No. 13.9.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
138	Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR No. 4.4.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
139	Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.. DSR No. 4.3.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
140	Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work) 40mm nominal bore. (Horticulture line). DSR No. 18.12.5 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
141	Constructing brick masonry chamber 600 x 600 x 750 mm inside with F.P.S. brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for Sluice Valve / Air Valve, with C. I. surface box 100 mm top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design . DSR No. 18.33.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
142	Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401, 4.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
143	Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade ordinary portland cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing. as per MoRT&H specification clause No.602, 6.02 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
144	Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) SI No. New Item 14 Ch. 20 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
145	Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm) . DSR No. 13.44.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
146	Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick. DSR No. 5.9.21 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
147	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.. DSR No. 5.22.6/5.22A.6 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
148	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes SECTION OUTER 80×40×2.9. VERTICAL. DSR No. 10.16.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
149	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR No. 13.62.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
150	Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster. DSR No. 13.9.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
151	Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.. DSR No. 19.15.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
152	Providing and fixing C.I. tee at the inlet and outlet of septic tank. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
153	Providing & fixing 75mm dia vent pipes.. DSR No. 17.35.2.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
154	Providing & fixing of 75mm dia cast iron terminal guard.. DSR No. 17.56.2.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
155	Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. HD . -20- Circular shape 560mm internal diameter. DSR No. 19.19.2.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
156	Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks. DSR No. 19.32.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
157	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. 300 mm dia. DSR No. 23.1.1.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
158	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. 300 mm dia. DSR No. 23.2.1.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
159	Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia.. DSR No. 23.3.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
160	Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm Nominal Size dia. DSR No. 23.4.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
161	Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm Dia. DSR No. 23.13.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
162	Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp. DSR No. 23.14.2 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
163	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm nominal size dia. DSR No. 18.12.6 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
164	Supply and Installation of 3.0 HP Submersible pump set complete I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.
165	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate DSR No. 11.3.1 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Cyber Cell Thana In Distt. Shamli In. F.Y. 2025-26, Shamli-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Cyber Cell Thana In Distt. Shamli In. F.Y. 2025-26, Shamli-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us