Tender For Providing Speed Breakers, Studs, Thermo Plastic Road Markings And Reflective Stickers In Sub Roads Entrance Connecting Main Roads In Kollancode Municipality., Kanniyakumari-Tamil Nadu
TDR : 55743004
Tender Notice
BOQ
15 Days Left
Kanniyakumari
Tamil Nadu
Tender For Providing Speed Breakers, Studs, Thermo Plastic Road Markings And Reflective Stickers In Sub Roads Entrance Connecting Main Roads In Kollancode Municipality.
Name of Work:- Providing Speed Breakers, Studs, Thermo Plastic Road Markings and Reflective Stickers in Sub Roads Entrance Connecting Main Roads in Kollancode Municipality.
Sl. No.
Item Description
1
Plain Cement Concrete 1:1.5:3 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification
2
Providing and fixing reflective road studs of ‘category A’ Raised pavement markers made out of poly carbonate / methyl methercrylate/ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MoRT&H circular No RW / NH. 33023/10/ 97-DO. III dt 11.06.97. The height, width and length shall not be less than 15 mm, 90 mm and 100 mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 (+/-) 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MoRT&H circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 (+/-) 2mm and height not less than 30 (+/-) 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the Engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC 35 - 2015 guidelines and MoRT&H specification 804 etc., complete HW-W0090
3
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads onBituminous Surface. Providing and laying of hot applied Thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35- 2015. The finished surface to be level, uniform and free from streaks and holes etc., complete as per MoRT&H specification No.803 HW-W0089
4
Providing and fixing of Retro - Reflectorised cautionary Star Sign made out of High IntensityPrismatic Grade reflective Sheeting sticked over CR sheet 0.20 mm / 32 G thickness with black enamel paint firmly fixed on the trees with 1 1/2 ‘’ x 14 G wire nails of size 100 mm x 100 mm Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
