|
| 1 | Excavation in foundation in ordinery soil (loan clay or sand) including lift upto 1.50 mt.and lead upto 50 mt. & including filling watering and ramming of excavated earth. into the trenches or into the space between the building and the sides of foundations trenches or into the plinth into removal / disposal of surplus earth as directed by the E/I. upto a distance of 50 mt. from the foundation trenches. S.I.No.-257 |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. DSR 2.27 |
| 3 | Cement concrete with 4 cm gauge stone ballast, coarse sand of cement in proportion of 1:4:8 in foundation & under floors, including supply of all materials, labour & T&P etc. required for proper completion of the |work (S.I.No. 281). |
| 4 | Reinforced cement concrete with cement, approved coarse sand and 2 cm (3/4\\") gauge graded approved stone grit in the proportion of 1:2:4 in raft foundation excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWG. G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials labour and tools and plants etc. required for proper completion of the work (S.I.No. 287) |
| 5 | M-150 class brick work in 1:6 cement & coarse sand in foundation and plinth including supply of all material labour, tools and plants required for proper completion ofthe work. (S.I.No.-303) |
| 6 | R.C.C. work with cement approved coarse sand and 2 cm. gauge approved stone grit in proportions of 1:2:4 in Lintel excluding supply ofl reinforcement and its bending but including its fixing and bind the same with 24 B.W.G.G.l. binding wire aridj including necessary centering and shuttering etc. and supply of all material labour, tools and plants required for proper completion of the work including cost of binding wire(S.I.No.285). |
| 7 | M. 150 class brick work in 1:6 cement and coarse sand mortar in Super Structure, including supply of all materials, labour & T&P etc. required for proper completion of the work. S.I. No. 303+309+310 |
| 8 | R.C.C. work with cement, approved coarse sand and 2cm (3/4\\") gauge approved stone grit in the proportion of 1:2:4 in SLAB having span upto 6.0 mtr. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G. G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials labour and T&P etc. required for proper completion of the work. . (SI NO 284) |
| 9 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. DSR 5.22.1 |
| 10 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. DSR 2.25a |
| 11 | 40 mm thick cement concrete flooring 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate of size 12.5 mm and below) laid over base concrete and finished with floating coat of neat cement without base concrete including fixing of glass strips. |
| 12 | Providing and fixing glass strips 5.5 mm thick and 3.5 mm deep in joints of floors . |
| 13 | Providing & Laying of 8-10mm thick ivory or light shade vitrified tiles of 600mmx600mm size in flooring or skirting laid with 1:3 cement mortar finishing with cement sturry & with pigment grouting & Polishing complete including supply of all materials, labour& T& P & plants etc. required for proper completion of the work. Chapter 14 Page 46 |
| 14 | Providing & Fixing 1 mm. thick M S. sheet garage door with frame of 40x40x6 mm. (1.5”x1.5”x0.25”) angel iron , 3.15 mm (1/8”) thick M.S. gusset plates at the junction corners, including supply and fixing of necessary fitting , locks rail of 15” length of oxidised iron and including pintels, hooks at the top and applying a priming coat of red lead paint on all sides complete. S.I. 519 |
| 15 | S/F of 3.0 mm thick glass panes with and including Atul or equivalent ISI mark quality putty and brads and spring including supply of all materials labour and tools & plants, etc. reuired for proper completion of the work but excluding cost of glass. Page 56 Item no 812(iii) |
| 16 | M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work.Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. Flats,square or round bars etc. all complete. Fixed to Steel windows by welding. DSR 9.48.1 |
| 17 | Supply and fixing of Mild steel Z section openable window with masquto steel jail and beading handel, stay, tower bolt etc and including supply of all materials, labour and T&P etc. required for proper completion of work. SI NO 502iii) |
| 18 | M-150 class brick work in 1:4 cement & coarse sand in super structure of one half brick thick including necessary butting and moulding of bricks including supply of all material labour, tools and plants required for propc completion of the work. S.l.No.- 303+309difrence of coarse sand. |
| 19 | M-150 class brick work in 1:4 cement & coarse sand in super structure of one half brick thick including necessary butting and moulding of bricks including supply of all material labour, tools and plants required for propc completion of the work. S.l.No.- 303+309difrence of coarse sand. |
| 20 | 12 mm thick cement plaster with cement &coarse sand in 1:6 including supply of all materials, labour & tools and plants etc. required for proper completion of the work. DSR- 13.4.2 |
| 21 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (For outer surface) - (Make- Birla opus /berger/ asain/ etc). DSR 13.47.1 |
| 22 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat. (Inner & Ceiling surface) - (Make - Birla opus /berger/ asain/ etc). DSR 13.41.1 |
| 23 | Painting old surface two coats over priming coat on previously painted surface including priming coat with superior synthetic enamel such as LUXOL 3, Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including cost f all materials labour tools and plants etc. required for roper completion of the work (S.I.No.643) |
| 24 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 100mm DSR 12.43.2 |
| 25 | Providing and applying white putty including cost of all materials labour tools and plants etc. required for roper completion of the work . DSR 13.80 Please Enable Macros to View BoQ information |
