Tender For Construction Of Pwd Ib At Remuna In The District Of Balasore For The Year 2025-26., Balasore-Odisha

TDR : 55741102

Tender Notice
BOQ

10 Days Left

Balasore , Odisha

Tender Brief : Tender For Construction Of Pwd Ib At Remuna In The District Of Balasore For The Year 2025-26.

Document Fees
₹ 10000 /-

EMD
₹ 211000.0 /-

Tender Value
₹ 2.10 Crore /-

Submission Date
16-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	CIVIL PORTION OF WORK :-Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete including cost of all labour,labour cess,T&P,sundries etc. as directed by the Engineer in charge.
2	Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge.
3	Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties, taxes of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge.
4	Providing 300mm dia 6.00m long Single under reamed Bore Compaction pile foundation with R.C.C. M-25 using 25 mm and down graded c.b. chips including cost of all materials labour etc. complete.
5	Providing 250 mm dia 3.000 m long Single under reamed pile foundation with R.C.C.M-25 using 20 mm and down graded c.b. chips including cost of all materials labour etc. complete.
6	Providing Cement concrete [1:2:4] using 12mm size chips including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
7	Providing 2.5cm thick Grading Concrete in C.C (1:2:2) with 4.7 mm size CBHG Chips on new roof slab including cost of materials , labour, T&P all comp.
8	Ground Floor
9	Terrace Floor
10	R.C.C. work of M-20 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge.
11	Drain Wall and Slab
12	R.C.C. work of M-25 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge.
13	Column base/Pile Cap
14	Gread Beam
15	COLUMN SUPERSTRUCTURE
16	Ground Floor
17	Terrace Floor
18	LINTEL
19	Ground Floor
20	Terrace Floor
21	CHAJJA
22	Ground Floor
23	Terrace Floor
24	Ground Floor
25	Terrace Floor
26	STAIRCASE
27	Ground Floor
28	ROOF SLAB
29	Ground Floor
30	Terrace Floor
31	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
32	Ground Floor
33	Terrace Floor
34	First class Fly ash Brick masonry using bricks of size 23cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge.
35	Providing 12 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
36	First class Fly ash Brick masonry using bricks of size 23cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge.
37	Ground Floor
38	Terrace Floor
39	First class Fly ash Brick masonry using bricks of size 23cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge.
40	Ground Floor
41	Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
42	Ground Floor
43	Terrace Floor
44	Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
45	Ground Floor
46	Terrace Floor
47	6mm thick cement plaster in C.M. [1:4] finished smooth to exposed R.C.C. work with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
48	Ground Floor
49	Terrace Floor
50	Fixing of granite tiles in floors of Size 600x600mm of approved make coformaing to I.S:13755 laid on on 25mm thick bed of Cement mortar 1:4 ( 1 Cement : 4 sand ) and filling joint with white Cement of approved quality in slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. ( For new work)with cost of all materials labor etc. complete.
51	Fixing of Granite tiles in dados, skirting riser of stepps 20cmx30cm / 20cmx20cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of tiles .
52	Fixing of vetrified tiles in floors of Size 600x600mm of approved make coformaing to I.S:13755 laid on on 25mm thick bed of Cement mortar 1:4 ( 1 Cement : 4 sand ) and filling joint with white Cement of approved quality in slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. ( For new work)with cost of all materials labor etc. complete.
53	Fixing of Vetrified tiles in dados, skirting riser of stepps 20cmx30cm / 20cmx20cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of tiles .
54	Fixing of antiskid ceramic tiles in floors of Size 300x300mm of approved make coformaing to I.S:13755 laid on on 25mm thick bed of Cement mortar 1:4 ( 1 Cement : 4 sand ) and filling joint with white Cement of approved quality in slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. ( For new work)with cost of all materials labor etc. complete.
55	Fixing of ceramic wall tiles in dados, skirting riser of stepps 20cmx30cm / 20cmx20cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of tiles .
56	Fixing of parking tiles in floors of Size 600x600mm of approved make coformaing to I.S:13755 laid on on 25mm thick bed of Cement mortar 1:4 ( 1 Cement : 4 sand ) and filling joint with white Cement of approved quality in slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. ( For new work)with cost of all materials labor etc. complete.
57	Providing and fixing Wrought Iron (W.I.) clamp made from flat iron of approved quality and size (generally 230 mm long × 25 mm wide × 3 mm thick or as specified), bent to required shape (Z-type or L-type), embedded in cement concrete block of 1:2:4 (cement: coarse sand: 20 mm down graded stone aggregate), including drilling holes in frame (wooden or RCC), grouting, and application of two coats of approved anti-corrosive paint over cleaned and primed surface, complete as per design, drawing, and direction of Engineer-in-Charge.
58	Ground Floor
59	Terrace Floor
60	Providing and fixing well-seasoned Sal wood chaukath (door/window frame) of specified section (generally 100 mm × 75 mm or as specified), made from first-class, kiln-seasoned and chemically treated Sal wood, free from sapwood, knots, cracks, or warping, including planing, cutting, jointing with mortise and tenon joints, and fixing in position with M.S. holdfasts, iron clamps or anchor fasteners embedded in cement concrete block of 1:2:4 (cement: coarse sand: stone aggregate) of suitable size at appropriate intervals including cost of all materials labor etc. complete.
61	Ground Floor
62	Terrace Floor
63	Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete
64	Ground Floor
65	Terrace Floor
66	Providing supplying M.S. grill made out of 12mm sq. bar and 25x6mm M.S. angle of approved desing including all cost etc. complete.
67	Ground Floor
68	Terrace Floor
69	Supplying Fitting and Fixing of Un-Plasicised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD ) Three Track - Three Panel Sliding Window - 60-Series duely manufactured using UPVC Reinforced profile of 108mm x 45mm x2.5mm for outer frame and Window Sash Profile of 39mm x 58mm x 2.5mm capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.50mm prefebricated and welded through fusion welding the window frame shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duely fixed with EPDM Weathering seal resistant and the system is to installed using Reinforced Large Coupler at the site using anchor fasteners sillicon rubber sealant easy glazing / deglazing at site etc including cost and conveyance of all materials, accessories,all labour charges and product confirming to ASTM D 638-14, EN-477-95 and other applicable codes and standards complete as per specification and direction of the Engineer-in-charge .
70	Ground Floor
71	Terrace Floor
72	Providing, Fitting & Fixing of false Celling with Aluminium T-Section no-3215 with 0.60m C/C , l-Sections fixed in walls by means of steel screws and pvc plug and the aluminium grid 0.60X0.60M SUSPENDED FROM CELLING ALL COMP.
73	Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification etc all completed.
74	Supplying & fixing 80mm thick cement concrete interlocking concrete paver blocks of M-40 grade of approved make,design,colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018.
75	Providing low height storage unit storage unit with HDF board including lamination etc. complete.
76	Finishing wall surfaces with Acrylic wall putty (Water based) of approved make and finished smooth and even surfaces to receive painting including cost of all materials taxes, labour T&P etc.
77	Ground Floor
78	Terrace Floor
79	Finishing wall surface with weather coat painting 2 coat over a coat of primer to the new surfaces of walls with all cost.
80	Ground Floor
81	Terrace Floor
82	Wall painting 2-coats with plastic emulsion paint of approved shade over a coat of primer on new work including cost of paint.
83	Ground Floor
84	Terrace Floor
85	Painting 2-coats with any approved paint over one coat of primer on new wood or iron work including cost of materials.
86	Ground Floor
87	Terrace Floor
88	Providing and appling of post construction Anti-termite treatment by drilling 12 mm dia. Holes at distance of 30 cm @ junction of wall and floor about 300 mm aprt deep enogh to reach the soil below and chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5 SC OF BAYER MAKE mixed with 47.5 lit water) pumped these holes to soak the soil @ 1 lit solution of each hole as per manufactures specification and the holes should be pluged with filling materials including cost of all material, labour conveyance and hiring charges of machinaries all taxes as per direction of ECI.
89	Supplying ,Fitting and Fixing TERRA BLOCK (Make Glo) on exterior wall surface having size 220mmx220mm x63mm using tile adheshive grout with required texture and design, including all operations such as surface preparation, demolding, curing, edge trimming, joint treatment, and finishing as per the direction of Engineer-in charge.
90	ELECTRICAL INSTALLATION:- Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/ Polycab/ HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & falme retradant type) switch ISI marked Make-Schneider (Zencelo)/ legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge.Group-A. L.P.- F.P.- C.B.-
91	Group-B. L.P.- F.P.- C.B.-
92	Group-C L.P.- F.P.- C.B.-
93	Recessed wiring for 5/6Amp modular Socket outlet with 2x1.5mm2 FRLS/FRLSH PVC insualted single core multistand copper conductor of ISI marked in recess 20mm dia Non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked on modular GI box and earthing point with 1x1.5sqmm FR PVC insulated single core multistand copper conductor for loap earthing etc.as required(make of wire-Finolex/L&T/Anchor/ Havels/V-Guard/Polycab) .Group-A.
94	On Existing board.
95	Recess wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge.a)1x1.5mm2(1.19.2.SOR-17) Inverter wiring
96	b)2 x 1.5 sq.mm + 1 x 1.5 sq.mm(1.19.2.SOR-17)
97	c)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17)
98	d)2x4mm2+1x1.5mm2 (1.8.3.SOR-17)
99	e)4 X 6 sq.mm + 1 X 2.5 sq.mm(1.8.4.SOR-17)
100	S/F of 20W/18W LED batten light of crompton(slim LINEA /Dazzle ray)/ Havells/ Panasonic or Equivalent make.
101	S/F of 1200mm sweep energy efficient 5 star rated BLDC Ceiling fan (Make- USHA(Technix)/ Crompton( Energeon Riviera) Regulator or equivalent model of Havells/ Bajaj or other reputed make) with regulator compatible as per direction of Engineer-in-charge.
102	S/F of 300mm metal exhaust fan with wall cutting including all accessories of USHA(Aero clean)/Bajaj (Bahar) /Crompton (Drift Air) make & connection as per direction of Engineer-in-charge.
103	Supplying and fixing of stepped type modular regulator of ISI marked(ROMA/Crabtree/L&T/ Legrand)or equivalent make on Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing connection, painting etc as required.
104	S/F of 1x15W 5700K surface /Recessceling LED light made up of pressure die cast housing with secondary optics ,IP66 protection Havells make(TRIM LED/ ENDURA NEO DL SURFACE/INTEGRA NEO SURFACE) /INTEGRA NEO/GRAND/HE/ EDGE PRO ROUND/SQUARE// Crompton( CROM ROUND/SQUARE) OR Equivalent model of Philips make as per direction of Engineer-in-Charge.(Basement-64)
105	Supply & Installation of LED Base Glow Sign Board As per below specificationDisplay meter :-1. Odiya Letter White Colour Letter Height 20 Inches),2. Government of Odisha LogoTotal Board Length 2.6 feet X 24 Feet. (Wall Mounting)ACP Sheet:- Aluminum based cover panel sheet(ACP) Letter Fixing the sign Board.(Silver Metallic ColourAluminum:- 2.5\\"X1.5\\" hallow square pipe framed cover with aluminum based cover panel sheet.Plastics Sheet: - 2mm Plastics Sheet (Red, Gren) Colour. English Letter.NosL.E.D:- 0.3 to 1 Watts (Red & Green) Colour.Power Supply: - SMPS (Switch mode Power Supply), RPS (Regulate Power Supply).In put Voltage 160 to 230 A.C./ Output Voltage 12/24 Voltas D.C.Silicon Past:- Past of ACP Sheet.M.S.Angale:- SIF of M.S. angle with setting, bending & welding work for structural work, Size of M.S.Angale 40X40X4 mm, 30X30X5 mm, 25x25X5 mm for supporting of LED sign Board, G.l. Note Bolt, Painting of Black colour.
106	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 01 No.s of 6 pin 15/16A modular socket outlet and 15/16 A modular switch & and 01 no. of 5/6 A modular socket outlet and 5/6 A modular switch , connections etc. as required.Modular switches make-Anchor/ Legrand /Roma) (5+15 A switch socket board)
107	Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 6pin 15/16Amp modular socket outlet and SP 15/16Amp oneway modular switch (Power Plug) with indicator connection, painting etc as required.
108	S/F of suitable size Modular G.l. box for surface or in recess with Modular base & cover in front including providing and fixing of 6pin 15/16Amp modular socket outlet with 20/25AMP SP MCB of (Hager/L&T/ Legrand make) connection, painting etc as required.A.C
109	Supplying and fixing of Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front including providing and fixing of 25AMP DOL starter (ROMA/ Crabtree/Havells make) of modular type switch, connection, painting etc as required as per the direction of Engineer-in-Charge.
110	Supplying and fixing of 4 Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front including providing and fixing of 3W 4 Modular foot light as a Bed lamp
111	Supplying and fixing of 3W 4 Modular flush mount ,plastic matte finish, indoor type,push button controlled ,cool white type ,Dimable Wall Sconce light with 12.9L x 12.9W x 22H inCentimeters ,0.38 Kilograms with G.l. box of suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front.(Make:Crompton/Philips)
112	Supplying and fixing of Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing of Modular Bulbul Callbell of ROMA or Equivalent make with connection, painting etc as required.
113	S/F of 4 sq.mm 2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100 grade(make-Havells/Polycab)(50mtr for street light)
114	P/F of 8 SWG Copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required (to be run along with cable for earth wire)( (SOR-3.20)
115	S/F of (4+12) way Double door D. Box (Hager/ L&T/ C&S/Legrand ) with 63Amp FP MCB ,12x(6-32Amp) SP MCB of Hager/ L&T/Legrand/C&S or Equivalent make make including all accessories and connection. as per direction Engineer-in-Charge.
116	Supply and fixing of Metering Unit
117	Service Connection Charges
118	S/F of 10sq.mm 4 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100V grade ISI mark(make-Havells/Polycab or Equivalent make ) as per direction of Engineer-in-charge. (To be Connected from LDB box to 160A- floor panel )
119	S/F of 25sq.mm 3.5 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100V grade ISI mark(make-Havells/Polycab) as per direction of Engineer-in-charge. (To be Connected from PDB box from 250Am panel of all floor)
120	S/M of end termination with brass compression gland and Al. lugs for 4 Core 10 mm2 PVC insulated and PVC sheathed/XLPE Al. cable of 1.1kV as per direction of Engineer-in-charge.(DSR2022-9.1)
121	S/M of end termination with brass compression gland and Al. lugs for 4 Core 25 mm2 PVC insulated and PVC sheathed/XLPE Al. cable of 1.1kV as per direction of Engineer-in-charge.(DSR2022-9.1)
122	Laying & fixing of one no. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on Cable Tray as required.
123	upto 35 Sqmm(clamped with 1mm thick saddle)
124	S/f Of 160Amp Floor Panel board size Fabrication of Panel board size 48x36\\"x12\\" with powder coat made out of SWG CR sheet with designing.-1no.,S/F of 200Amp Porcelain Kitkat fuse of ISI marked-3nos .160A , 25kA, On load change over 4pole without cover(Make- ABB/ Hager/ Simens/ schneider)-1no.63A, 4P, 25kA MCCB fixed thermal & fixed magenetic hager/make/L&T/Legrand or Equivalent make .-4.nos,63A, 4P MCB C- Series Legrand / Hager / L&T Make.-2nos.,40A, DP MCB C- Series Legrand / Hager / L&T Make.-2nos,250Amp TPN Cu. Bus bar 35mmx10mm-1set,Digital Voltmeter,Ammeter selector switches CT coil & indicator lamp RYB with toggle switch etc complete. -1Set,Internal wiring of the Panel suitable copper flat 7/20mm2 SC FR copper cable with colour,Transportation charges,Fixing charges of Panel with RCC foundation base with MS Angle nuts & bolts.-1set
125	S/f Of 64Amp VTPN Panel boardFabrication of Panel board size 36\\"x24\\"x12\\" with powder coat made out of SWG CR sheet with designing.
126	63A, 4P, 25kA MCCB fixed thermal & fixed magenetic hager/make/L&T/Legrand or Equivalent make .
127	Busbar Chamber with copper strip 63A,4way
128	Digital Voltmeter,Ammeter selector switches CT coil & indicator lamp RYB with toggle switch etc complete.
129	Internal wiring of the Panel suitable copper flat 7/20mm2 SC FR copper cable with colour.
130	Transportation charges
131	Fixing charges of Panel with RCC foundation base with MS Angle nuts & bolts.=1 NO. EACH
132	Lightning Protection :- Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
133	Supply of Roof conductor holder for parapet- PolyamideConductor holder:With M8 female thread or diameter 7mm, M8Screw to connect the conductor holder.Weather andtemperature resistant from -35 to +90 degree Celsius tested.Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
134	Supply of Polyamide roof cable holder for flat roof:DIN 48829 Form B1. Closed form with bottom. Filling weight1Kg (frost-resistant concrete). Sleeve from polyethylene, black@ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn
135	Supply of Connector: For T cross and parallel connectors. Quickinstallation using hexagonal bolt M10X30 high-grade hot dipgalvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn
136	Supply of 1 mtr vertical air terminal with mounting accessorieson the flat surface to meet the requirements of IS/IEC 62305.Tested for Electrical , mechanical and chemical as per IEC62561. Tested for 100kA lightning current. Make-OBO/Dehn
137	Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 3 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. Tested as per IEC 62561. Make-OBO/Dehn
138	Supply for Providing of Stand for Fang Fix system 16 kg with base andclamp ,made up of frost resistant concrete and clamp testedupto 100KA lightning current . Make-OBO/Dehn
139	Supply for Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. Make-OBO/Dehn
140	Supply of Test Joint (Folding Clamp) suitable to connect 8mmround conductor and max by 30x3 mm GI strip as specified indrawing and directed by Engineer.Tested for 100kA lightning current. Make-OBO/Dehn
141	Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr HeightFor Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn
142	Supply of Galvanised Steel Flat 30X3 mm thickness from earthelectrode directly in ground as required. Flat conductor HotDipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn
143	Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn
144	Supply of flat conductor holder- Fit: FL 30, With mounting hole6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece fromhot-dip galvanised steel, Bottom section from polyamide, black.Tested as per IEC 62561. Make-OBO/Dehn
145	Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn
146	Supply of UL Listed maintenance free ,Low carbon coppercoated earth rod of 3 metre electrode having diameter of 17.2mm with copper coating thickness of 250micron tested as perIEC 62561-2 Make-OBO/Dehn
147	Supply of universal clamp made of SS to connect rod with flatconductor Make-OBO/Dehn
148	Supply of Earth conductivity enhancing mineral compound shall be of 25kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn
149	Supply of The above arrangements shall be provided with Heavy dutyearth champer of 5000kg load bearing capacity to ensure thesafety of earthing system Make-OBO/Dehn
150	S/F of Street light- 90W,120 lm/w efficacy , new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty)
151	Supply of 6 mtr long hot dip Galvanized Octagonal pole DOUBLE ARM TYPE manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat as per direction of Engg. in Charge.
152	Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the pole equievalant make ISI marked as approved as per direction of Engg. in Charge.
153	Supplying, Erection, Fixing, connection & testing of 40W LED GATE Light of (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) maintenance free having 2 years warranty G.I P ipe with braket including MCB box & including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.
154	Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years
155	Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
156	Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
157	Providing,fixing and laying of fallowing dia PN10 HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
158	PUBLIC HEALTH: Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to C-PVC / ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. In Ground Floor
159	20 mm dia C-PVC Pipe
160	25 mm dia C-PVC Pipe
161	32 mm dia C-PVC Pipe
162	40 mm dia PVC(Sch-80) Pipe
163	Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. In ground Floor - 250mm thick wall
164	Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
165	Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
166	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor
167	Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. Fixing 2000 Ltr Roto-moulded water storage tank (Syntax Make) 3 layer on the roof of G floor
168	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. (Fixtures make of Brass / G.M / C.P fittings are to be pre-approved by the E.I.C) .
169	15mm dia CP BIB COCK WITH WALL FLANGE.(Jaguar-FLR-CHR-5047N)
170	15mm dia CP Long body bib cock (Jaguar-ARI-CHR-39021)
171	15mm dia CP angle stop cock (Jaguar-KKUP-CHR-35053PM
172	20mm dia CP Concealed stop cock (Jaguar-FLR-MCH-5089N)
173	15mm dia CP two Way bib cock (Jaguar-FUS-CHR-29041)
174	15mm dia Jaguar (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible CP Tube & Wall Hook ALD CHR -573
175	15mmx450 mm Braided Hose Connection Pipe with both side Nuts & Rubber Washers . (As per Cat. No-805B of Jaquar)
176	32mm dia C.P. Coat Hook (Double) (As per Cat. No. ACN-CHR-1161N of Jaquar)
177	25mm dia Brass or G.M. Full way Valve
178	32mm dia Brass or G.M. Full way Valve
179	40mm dia Brass or G.M. Full way Valve
180	15mm dia Extension Piece
181	15mm dia CP Flange
182	125mm dia. CP grating
183	15mm dia C.P Pillar cock(CON-CHR-021KN)
184	32mm dia PVC waste pipe with brass coupling nut
185	Sink cock -jaguar cat no. FLR-CHR-5347N
186	Supplying all materials ,labour ,T&P and fitting and fixing CP shower with 15mm or 20mm inlet including polishing etc.all complete as per specification and direction of Engineer-in-charge. OVERHEAD SHOWER 240 x 240MM SQUARE SHAPE SI (Cat no. OHS-ABR-1629GB of Jaguar) with Shower Armm 600x25x25mm square flange (Cat no. SHA-CHR-455l600 of Jaguar)MAZE OVERHEAD SHOWER 240X240mm SQUARE SH
187	Single Lever Exposed Parts Kit of Hi-flowDiverter Consisting of Operating Lever,Cartridge Sleeve, Wall Flange (withSeals), Button Assembly Sleeve &Button (Compatible with ALD-079N)(As Per Cat. No: Cat. No: KUP-CHR-35079NKPM ofJaquar)
188	15mm CP wall mixture with telephonic shower(3 in 1)(CON-281KN)
189	15mm dia CP hand shower with reebit cleaning system (ABC chrome plated-Jaquar make-HSH-CHR-85537)
190	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method /as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.
191	110mm diameter U-PVC SWR pipes (Asirvad / Supreme Make)
192	75mm diameter U-PVC SWR pipes (Asirvad / Supreme Make)
193	110mm dia U-PVC plain Bend
194	110mm dia U-PVC Door bend
195	110mm dia U-PVC Door Tee
196	110mm dia U-PVC Door cross Tee
197	110mm dia U-PVC plain Tee
198	110mm dia socket plain
199	75mm dia socket plain
200	110mm dia plain shoe bend
201	75mm dia plain shoe bend
202	110mm dia U-PVC Offset without ear
203	110mm dia U-PVC Cowl
204	110mm dia P-trap
205	supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres capacity PVC LL cistern (Slimline-Deluxe-white-Parryware make)
206	Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.
207	370x695x795mm Size,S Trap- 300mm Single piece WC ( Jaquar Cat No. KUS-WHT-35851S300UF)
208	Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge. (a) 580mmx440mm size Orissa pan (Hinware/Parryware or equivalent make)
209	Supplying all materials ,labour ,T&P and fixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestral for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as per specification and direction of Engineer-in-charge.I.530x460x400mm size Wall Hung Integrated Basin with all Accessories (Jaguar Cat No. OPS-WHT-15803)
210	575mmx430mmx175mm size Table Top Basin ( Jaguar Cat No.. KAS-WHT-49901-TABLE TOP BASIN, SIZE: 710X460X180 mm)
211	Supplying all materials ,labour ,T&P and fixing wash kitchen sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste , fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc. including cutting holes in walls and making good the damages etc.all complete as per specification and direction of Engineer-in-charge.600x450x250 mm stainless steel kitchen sink with drain board-glossy-IS:13983 - 1994 (Jayna make)
212	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5m thick on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge.Mirror of best quality of 2100mmx600mm
213	Design Mirror(Parryware make)
214	Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.CP TOWEL RING SQUARE (Jaguar, Cat no- ACN-CHR-1121N)
215	GLASS SHELF 600X120MM LONG with CP/NP guard rails (Jaguar, Cat no- ACN-CHR-1171NW120)
216	TOWEL RAIL 600MM LONG, STAINLESS STEEL(Jaguar, Cat no- ACN-CHR-1111NM)
217	Towel Rack 600mm long with Lower Hangers, Stainless Steel AKP Jaguar cat no.ACN-ABR-1181S
218	Supplying all materials ,labour ,T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-charge.
219	CP soap holder(Jaguar, Cat no-ACN-CHR-1131N)
220	Liquid Soap dispenser with glass bottle(Jaguar ,Cat no.-AKP-CHR-35735P)
221	TOILET ROLL HOLDER WITH STAINLESS STEEL (Jaguar ,Cat no.-ACN-CHR-1153S)
222	CIVIL WORK for PH :- Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -chargeIn ground floor
223	VIP SUITE- 4x1.83x2.87mx0.20m
224	Drivers rest room- 2x2.64x1.47x0.20m
225	Wash room- 2x2.59mx2.44mx0.20m
226	Ground Floor
227	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
228	VIP SUITE- 4x1.83x2.87mx0.15m
229	Drivers rest room- 2x2.64x1.47x0.15m
230	Wash room- 2x2.59mx2.44mx0.15m
231	Ground Floor
232	Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size crusher broken hard black granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
233	VIP SUITE- 4x1.83x2.87mx0.10m
234	Drivers rest room- 2x2.64x1.47x0.10m
235	Wash room- 2x2.59mx2.44mx0.10m
236	Ground Floor
237	Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In Super structure.G floor
238	Ground Floor
239	Fitting and fixing vetrified tiles Kajaria on floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost conveyance, royalities and taxes etc. all complete as per direction of Engineer in charge. (Ceramic floor tiles of premium grade Somany Geostone Mist make of size 600x600mm to be pre-approved by the Engineer in charge)
240	Kajaria(600x600mm) (In G.Floor)
241	VIP SUITE- 4x1.83x2.87m
242	Drivers rest room- 2x2.64mx1.47m
243	Wash room- 2x2.59mx2.44m
244	Ground Floor
245	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
246	VIP SUITE- 4x2(1.83+2.87m)x2.13m
247	Drivers rest room- 2x2x(2.64m+1.47m)x2.13m
248	Wash room- 2x2x(2.59m+2.44m)x2.13m
249	Deduct for door- 6x0.91mx2.13m
250	Ground Floor
251	Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles etc.complete as per direction of the Engineer in charge. (Ceramic wall tiles of premium grade Somany Daino Light(Glossy) make size 600 x 300 special plain / printed series to be pre-approved by the Engineer in charge)
252	Kajaria(600x300mm) (GF)
253	VIP SUITE- 4x2(1.83+2.87m)x2.13m
254	Drivers rest room- 2x2x(2.64m+1.47m)x2.13m
255	Wash room- 2x2x(2.59m+2.44m)x2.13m
256	Deduct for door- 6x0.91mx2.13m
257	Ground Floor
258	Supplying all materials, labour, T&P and providing Granite Plate , treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge
259	2x1.88x0.60=
260	2x2.59x0.60=
261	Ground Floor
262	Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.
263	VIP SUITE- 4x2(1.83+2.87m)x0.60m
264	Drivers rest room- 2x2x(2.64m+1.47m)x0.60m
265	Wash room- 2x2x(2.59m+2.44m)x0.60m
266	Ground Floor
267	Supplying all materials, labour, T&P and providing cement washing 2 coats including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
268	Ground Floor
269	Supplying all materials, labour, T&P and distempering two coats to walls with distemper of approved shade on new work to give an even shade etc all complete as per specification and direction of the Engineer in charge.
270	Ground Floor
271	Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD) Casement Toilet Door – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding.The Door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like Bathroom locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges. The materials and product confirming to ASTM D 638-14, EN-477-95 and other applicable codes and standards.
272	Ground Floor
273	Supplying all materials, labour, T&P and providing fitting and fixing Dr.Aqua guard Magna UV+HD of size 316x251x462mm with wall hanging facility having storage of 7 ltrs. etc.with internal water supply connection complete as per direction of the Engineer-in-charge.(in 1st and 2nd floor)
274	Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, K.B brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
275	Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
276	Ground Floor
277	Supplying all materials ,labour ,T&P and constructing Man Hole Chamber of inside size 910mmx910mmx910mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , Fly ash brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken black hard granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing, conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
278	Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
279	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
280	110mm dia u-pvc pipe alround concrete
281	Construction 1 nos 30 users RCC Septic tank
282	Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
283	1.5m initial lift
284	addl. Depth of 1.5 m
285	Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
286	Ground Floor
287	Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
288	Ground Floor
289	Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
290	1x3.90mx1.70mx0.20m=
291	1x2(3.8+1.20)x0.20x2.10=
292	Top slab
293	1x3.8x1.60x0.10=
294	Ground Floor
295	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
296	Roof Slab-1 x 3.40x1.20=
297	Slab side-2 x (3.80+1.60) x0.10=
298	Base -1 x 2(3.90+1.70)0.20m=
299	For RCC Slab/Base
300	Inside
301	1x2(3.40+1.20)x2.10
302	Out Side
303	1x2(3.8+1.60)x2.10
304	For RCC wall
305	Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
306	Ground Floor
307	Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
308	Floor-1 x 3.40x1.20=
309	I/s Wall-1x2(3.40+1.20)x2.10
310	Out side 1x2 x (3.80+1.60)0.20
311	Ground Floor
312	Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
313	Supplying all materials, labour, T&P and fitting and fixing S.W.Tee of size 100mx100mx160m as per P.H.D.specification and direction of the E.I.C.
314	Supplying all materials, labour, T&P and constructing vent base as per P.H.D specification etc all complete.
315	Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.
316	110mm diameter U-PVC SWR pipe
317	110mm dia U-PVC Plain shoe bend
318	110mm dia U-PVC Cowl
319	Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
320	Ground Floor
321	Sinking of 150mm dia tubewell through hand boring (water jet ) method .Supplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge
322	Supplying all labour, T&P and transporting the boring pipes, top casing , grouting pipes, P.V.C pipes and fittings, P.V.C well screens, cement, bentonite and gravels etc to the worksite including loading and unloading etc all complete as per direction of Engineer in charge
323	Supplying all labour, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kinds of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per direction of Engineer in charge. Drilling pilot bore from 0 to 360 metres
324	Supplying all labour, T&P and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer in charge Reaming 100mm to 150mm dia from 0 to 360 metres
325	Reaming 150mm to 200mm dia from 0 to 360 metres
326	Reaming 200mm to 250mm dia from 0 to 360 metres
327	Supplying all labour, T&P and jointing materials and lowering the 300mm dia top casing pipes into the position and removing the same after use all complete as per direction of Engineer in charge from 0 to 360 metres
328	Supplying all labour T&P and grouting with cement slurry for saline sealing in the bore around the 150 mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
329	Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge 150mm dia PVC casing pipe from 0 to 360 metres
330	Cost of 150mm dia PVC ASTM pipe (sch-80)
331	Cost of 150mm dia strainer cutting
332	Cost of 150 mm dia C.I. end plug
333	Cost of bentonite powder
334	Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction of the Engineer in charge
335	Cost and Conveyance of Gravel
336	Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack etc all complete as per the direction of the Engineer in charge
337	Cost and Conveyance of sand
338	Supplying all labour T&P and grouting with cement slurry for sanitary sealingin the bore around the upper most 3 metres of 150mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
339	Cost of Cement
340	Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By Compressor
341	Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge2.00 H.P three phase submerssible pump set
342	DOL Control panel
343	40mm dia steel short piece
344	Well cap
345	50mm size CI bracket
346	2.50sqmm flat cable
347	40mm dia GI pipes
348	Steel rope with cover
349	32mm dia HDPE pipe
350	Labour charges for lowering including transportation
351	Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Pwd Ib At Remuna In The District Of Balasore For The Year 2025-26., Balasore-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Pwd Ib At Remuna In The District Of Balasore For The Year 2025-26., Balasore-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us