|
| 1 | Repairing of roof of godowns with water proofing material such as Bitumen felt/bitumen/tarplastic or any other water proofing material etc approved by the Engrin charge with and including replacement of bitumen washer and tightening of 'J' hooks & nuts wherever required ( Details of cost for 5000 MT capacity godown)to be carried out through out the contract period. |
| 2 | Repairing and maintenance of G.I. profile sheet roofing of godown with material such as silicon sealent, self drilling / tapping screws of size 5.5x55 mm with EPDM seal , including greasing of turbo ventilators as and when required complete as per the directions of Engineer in charge. (Details of cost for 5000 MT capacity godowns))to be carried out through out the contract period. |
| 3 | Cleaning of internal drains, Nallah storm water drains (of all sizes) etc for smooth flow of water including disposal of rubbish outside the premises with all leads and lifts as per direction of Engineer in charge. (The drains are to keep clean during the full period of contract) |
| 4 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having tthermal stability for hot & cold water supply includung all CPVC plain & brass threaded fittings . This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer - in charge. External work (A) 25 mm nominal outer dia pipes |
| 5 | Providing and filling in position elastomeric crack filler compound Confirming to ASTM C 834-91 For sealing of construction joints inindusrial/ warehouse panel flooring all complete as per direction of Emgr-In- Charge |
| 6 | Filling and plugging of rodent burrows/chambers inside godown floors and platforms by flushing with water, placing approved rat repellent cake inside the burrow, filling with mixture of bentonite, cement and iron filings in approved proportion, prepared in hand operated mixer, compacting with tamping rod in layers, and finishing the surface flush with adjoining floor with neat cement floating coat, complete as per directions of Engineer-in-Charge. |
| 7 | Providing and fixing G.I. wire mesh of 0.60 mm dia conforming to IS: 280 and IS: 1568 in patches of required size to plinths and platforms after dismantling the existing cement plaster around rodent burrows/channels, including dressing the edges, fixing the mesh with suitable G.I. nails, and re-plastering the area with 15–25 mm thick cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) conforming to IS: 2250, to match the existing thickness, line and level, including making good the surface complete as per directions of Engineer-in-Charge |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Providing and fixing 6 mm AC sheet in roofing including dismantling damaged / broken AC sheets upto any pitch and fixing with polymer coated 'J' or 'L' hook bolts& nuts 8 mm dia G.I. plain and bitumen washer etc. complete as per direction of Engineer in Charge including cutting sheets to required size and shape whereever required and stacking the dismantled AC sheets etc complete. |
| 10 | Providing and fixing ridges and hips in asbestos cement sheets roofing close filling adjustable ridges complete all as directed by Engr in charge. |
| 11 | Repairing and Greasing of rolling shutters at the rate of 500 grams yellow cup grease of good quality each shutter after cleaning with Kerosene oil properly including tensioning of springs / replacement of spring wherever required including replacement of damaged stripes and side guides koni complete and making easy push & pull operation and removing the top cover and refixing the same after greasing with all materials and labour etc., complete as directed by Engineer-in-charge. (Twice in a year). |
| 12 | Supply of springs of grade No. 2 of 45 cm length( Internal dia 10 cm minimum) , of Minimum wt 6.00 kg, made out of 6 mm dia rod including loading, unloading and transportation at site and inclusive all taxes except GST etc. complete. |
| 13 | Supply of shafts of approved quality for rolling shutters of all sizes of 40mm dia. MS pipe medium duty including loading, unloading and transportation and including all taxes except GST etc. complete. |
| 14 | Supply of M.S. wheel of required size for rolling shutter of approved quality including loading, unloading and transportation at site and inclusive of all taxes except GST etc. complete. |
| 15 | Supply of M.S. laths of size 80mm x 0.90 mm for Rolling shutter of approved quality including all taxes except GST transportation, loading, unloading & stacking at site etc. complete. |
| 16 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 17 | Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 18 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: in cement mortar. |
| 19 | Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like. |
| 20 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 21 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc.. complete. |
| 22 | Providing and fixing concertina coil fencing with punched tapeconcertina coil 600 mm dia 10 metre openable length ( total length90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apartand with 9 horizontal R.B.T. reinforced barbed wire, stud tied withG.I. staples and G.I. clips to retain horizontal, including necessarybolts or G.I. barbed wire tied to angle iron, all complete as per directionof Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Springcore (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mmwith tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 23 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 24 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil |
| 25 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (A) All kinds of soils |
| 26 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 27 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.(B) Nominal concrete 1:4:8 or leaner mix ( i/c equivalent design mix ) |
| 28 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. (A) Nominal concrete 1:3:6 or richer mix ( i/c equivalent design mix ) |
| 29 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (A) 1:4:8 (1 Cement : 4 coarse sand (Zone III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 30 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20 mm nominal size stone aggregate |
| 31 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 35 in foundation and plinths in all shapes and sizes in : (A) Cement Mortar 1:6 (1Cement : 6 Coarse sand ) |
| 32 | 20 mm cement plaster of mix (A) 1:6 (1 cement: 6 fine sand) |
| 33 | 12 mm cement plaster of mix : (A) 1:6 (1cement : 6 fine sand) |
| 34 | 15 mm cement plaster on rough side of single or half brick wall of mix : (A) 1:6 (1cement : 6 fine sand) |
| 35 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 36 | Providing gola 75x75 mm in cement concrete 1:2:4 ( 1 cement :2 coarse sand:4 graded stone aggregate 10 mm and down guage)including finishing with cement mortor 1:3 ( 1 cement : 3 fine sand) as per standard design. : In 75x75 deep chase. |
| 37 | Supply of skilled labours to carry out the misc works in Depot premises, D.O. Premises and staff quarters premises as & when required as per direction of Engineer in charge : Painter, Blacksmith, Carpenter, Electrician, Fitter, Mason, Mechanic, Welder, Plumber, etc. |
| 38 | Supply of unskilled labours to carry out the misc works in Depot premises,D.O. Premises and staff quarters premises as & when required as per direction of Engineer in charge : Beldar, Coolie etc. premises as and when required as per direction of Engineer-in- charge(b) Unskilled labours ( Beldar, Coolie ) |
| 39 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 40 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :Of sectional area 40 square centimetres and above |
| 41 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987,Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With fully perforated 12 mm thick micro tegular edgedor 10 mm thick square edged GRG false ceiling tiles. |
| 42 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) cum 8843.45 |
| 43 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) cum 8843.45 |
| 44 | Providing & fixing acrylic sheet panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick acrylic sheet panes (weights not less than 4.70 kg/sqm) |
| 45 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 46 | Supplying of Mild steel expanded metal 20x60 mm strands 3.25 mm wide 1.60 mm thick .( including all taxes applicable, including supply of material at site) |
| 47 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm |
| 48 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 49 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 50 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm |
| 51 | Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Granite stone slab colour black, Cherry/Ruby red.Area of slab upto 0.50 sqm |
| 52 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 53 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm |
| 54 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :250x10 mm |
| 55 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm |
| 56 | Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required includingcleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge.Powder coated aluminium (minimum thickness of powder coating 50 micron) (Glazing, paneling and dash fasteners to be paid for separately) : For Fixed portion |
| 57 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) :For movable portion |
| 58 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm). |
| 59 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading |
| 60 | Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc. |
| 61 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand andmanufacture |
| 62 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved. |
| 63 | Credit for taking away dismantled / released materials from site on \\"as is where is basis\\" : Old Asbestos cement sheets ofany size and condition |
| 64 | Credit for taking away dismantled / released materials from site on \\"as is where is basis\\" : Old GI/Profile sheets of any size and shape including J OR L hooks , & other metal /wooden scrap Please Enable Macros to View BoQ information |
