|
| 1 | Engaging labour for cutting patches in proper shape / shifting of material and other allied works for Day to day maintanance all complete job. |
| 2 | Engaging Safai Karamchari for removing unhygenic mulba from the chowked drains and mulba dumps and disposal all complete job. |
| 3 | Engaging manpower for diversion of traffic at the time of maintenance work all complete job. as per the direction if engineer in charge |
| 4 | Providing and laying WBM Grade Ill with specified crushed stone aggregates 53 mm to 224 mm size including stone screening 11.20 nominal size and binding material complete incl sorting and spreading to template and consolidation |
| 5 | Providing and applying tack coat using hot straight run bitumen of gradeVG 30 |
| 6 | On W.B.M surface @ 0.75 kg/sqm |
| 7 | On Bitumen surface @ 0.50 kg/sqm |
| 8 | Providing and laying seal coat of premixed fine aggregate with bitumen using 128kg of bitumen of grade VG30 per cum of fine aggregate including finishing road all complete job vide item no 7 |
| 9 | Surface dressing of the ground including removing vegetation and in-equalitiesnot exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto1.5 m in -All kinds of soil. |
| 10 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 11 | Disposal/Removing of unhygenic materials from designated site to dumping site including disposal(Avg. Lead 10Km) |
| 12 | Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface. |
| 13 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)vide item 12 |
| 14 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade on old work 80%of vide item 13 |
| 15 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade on new work 20% vide item 13 |
| 16 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 17 | Providing and laying in position cement concrete of specified grade including curing and admixtures etc but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)patches |
| 18 | Providing and laying in position cement concrete of specified grade including curing admixtures but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 19 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)slab on grating |
| 20 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete T.M.T bars 80 kg/cum of vide item 19 |
| 21 | 2.5 cm premix carpet surfacing with 2.25cum and 1.12 cum of stone chippings of 13.2 mm and 11.2mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacityetc. complete (tack coat to be paid for separately).With paving Asphalt grade VG-30 with no solvent. vide item 4 |
| 22 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 23 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or liner mix |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 25 | Foundations, footings, bases for columns |
| 26 | suspended floors,roof etc |
| 27 | Engaging Backhoe like jcb for backcutting etc |
| 28 | Engaging tipper trolley etc for disposal of mulba |
| 29 | Excavating, supplying and filling of local earth (including royalty)by mechanicaltransport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 30 | Providing,suplying placing in position and removal of safety barrier,trap icon at the time of maintenance work on road.coplete job as per the direction if engineer in charge |
| 31 | Providing and applying 2.5mm thick road marking strips (retro-reflective)of specified shade/colour using hot thermoplastic material by fully/semiautomaticthermoplastic paint applicator machine fitted with profile shoe,glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour,T&P, cleaning the road surface of all dirt,seals, oil, grease and foreignmaterial etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications |
| 32 | Providing Retro-reflective regulatory sign board of size 900mm diameter made out of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67 with required colour scheme on the boards and with the high intensity grade A. the aluminum sheet to be riveted to M.S. frame of angle iron of size 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square post made of M.S. angle 50x50x4mm, 4m long welded to the frame with adequate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminum sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per directions of Engineer-in-charge. |
| 33 | Carriage of materials including loading unloading for avg. lead of 10 km |
| 34 | Stone Agregate above 40 mm vide item 6 |
| 35 | Stone Agregate below 40 mm,sand dust etc Please Enable Macros to View BoQ information |
