|
| 1 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (below and above ground level), complete all as specified and directed. |
| 2 | Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | M&L for 75 mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base of floor, complete all as specified and directed. |
| 4 | M&L for Non skid ceramic coloured tile of approved shade and pattern 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with CM 1:6 complete all as specified and directed. |
| 5 | M&L for non skid ceramic coloured tile of approved shade and pattern 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in skirting/dado and riser to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick backing coat plaster with CM (1:4), complete all as specified and directed. |
| 6 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick(square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 7 | M&L for glazed ceramic coloured tiles in vertical surface 450x350x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including provn of 10 mm thick backing coat in CM 1:4, complete all as specified and directed. |
| 8 | Dismantling Wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 9 | S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section(not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre. size of grid 605mmx605mm including Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed. |
| 10 | M&L for 4mm thick non asbestos fiber cement building boards white/ off white (E-board designer) fixed or laid /inserted to timber/ GI/ Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed. |
| 11 | S&F hollow PVC Lining in wall or ceiling consist of 5 to 10 mm thick wood grain printed PVC sheet including of corner & end bedding solvent cement/ fixing with nail at site complete all as specified and directed. |
| 12 | Taking down chowkhats or frames n.exc 1.5 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and directed. |
| 13 | Taking down chowkhats or frames exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc.,complete all as specified and directed. |
| 14 | S&F pressed steel frames of size 125x60mm for doors with one or more rebates including supply & fixing lugs,125mm size including MS hinges, lock strike plate, etc, including one coat of priming, complete all as specified and directed. |
| 15 | M&L for PCC 1:3:6, type C-1, using 20mm graded mechanically crushed stone aggregate as in filling pressed steel frame /hold fast blocks etc., complete all as specified and directed. |
| 16 | S&F for factory made single extruded WPC (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and directed. Note: i) M S hold fast/ lugs or SS dash fasteners shall be paid for separately. ii For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 17 | S&F for 35mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush WPC door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note: Stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 18 | S&F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) plain flush WPC door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary S S screws shall be paid separately. |
| 19 | S&F aluminium sliding windows with 50 micron powder coating, three track sliding windows with two glazed shutters, 4mm thick tinted glass ordinary quality and one shutter of stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm including good quality of bearing handle, locks, including EPDM gasket to render the glazing, air and water tight etc complete all as specified and directed. catalogue numbers of Jindal company or equivalent make as specified. Three track bottom-20957, three track top/ vertical-20958, handle-20606, Interlocking-20605, Top and Bottom -20604, complete all as specified and directed. |
| 20 | S&F 35 mm thick factory made glazed & Skelton shutter of IInd class hardwood open rebated & prepared to receive glass or gauze etc (without sash bar) open rebated with edges of framing plain, chamfered or rounded, fitted with cut & mitered beads for securing glass or gauge etc size of members of shutters etc as specified in sec 8 clause 8.24 (a) of SSR Part-I (2010), complete all as specified and directed. |
| 21 | S&F stainless steel butt hinges medium weight, cold rolled, 100 mm, ISI marked, complete all as specified and directed. |
| 22 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section and fixed, complete. all as specified and directed. |
| 23 | S&F 200 mm long aluminium anodized, barrel tower bolts of extruded section, complete all as specified and directed. |
| 24 | S&F 100mm size aluminum handle fabricated, 'D' type, anodized ISI marked complete all as specified and directed. |
| 25 | S&F 150mm size aluminum handle fabricated, 'D' type, anodized ISI marked complete all as specified and directed. |
| 26 | S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed. |
| 27 | S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed. |
| 28 | S&F 300 mm MS ordinary rat tail rod pattern springs including roller and roller plate fixed to wooden chowkhats or welded to angle iron door frames, complete all as specified and directed. |
| 29 | S&F door magnet /door catcher for cabinet cupboard /ward droobe , kitchen including suitable screws for fixings complete all as specified and directed |
| 30 | S&F floor door stopper of Aluminium alloy body and tongue, anodised overall length of cover plate of size 140 mm long with hard drawn steel spring fixed in floor complete all as specified and directed . |
| 31 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or MS beads size 2mm to 3mm, complete all as specified and directed. |
| 32 | S&F steel windows or ventilators, fixed type, with glazing bars, complete all as specified and directed. |
| 33 | S&F for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, and similar work conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 34 | S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane, complete all as specified and directed. |
| 35 | S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) work for partitions ( fixed portions) with extruded built up standard tubular section/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall be smooth, rust free straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P brass/ stainless screws, complete all as specified and directed. |
| 36 | S&F prelaminated particle board, 9 mm thick interior grade, prelaminated both side with decorative choice lamination, fixed with screws to aluminium frame work as in cup board, cabinets and similar type of work, complete all as specified and directed. |
| 37 | M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 38 | M&L for preparation of Old surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 39 | M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 40 | M&L for preparation of old wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 41 | S&F in repair stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete including fixing of brackets, Knob fancy type fixed with stainless steel screws etc., complete all as specified and directed. |
| 42 | S&F angle iron as in posts and struts for fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work conforming to Fe-290 gde E-165, complete all as specified and directed |
| 43 | S&F steel work tubular for vertical posts, rafters, purlins, bracings etc including special shaped washers etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, complete all as specified and directed. |
| 44 | S&F mild steel Fe-290, Gde E-165, plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 45 | S&F 12mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10cm long complete all as specified and directed. |
| 46 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 47 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 48 | Demolition of brick or stone masonry, built in cement mortar including all quoins, pillars, arches etc but excluding ashlars facing complete all as specified and directed. |
| 49 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6), complete all as specified and directed. |
| 50 | M&L for brick work with sub class‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and directed. |
| 51 | M&L for 75mm thick cement concrete 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection complete all as specified and directed. |
| 52 | S&F in repair to replace old and decayed timber (including piecing, scarfing etc of old and new timbers if required) and removing defective portion and providing IInd class hardwood scantling framed and fixed timber clean sawn, complete all as specified and directed. |
| 53 | S&F Mild steel TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed. |
| 54 | S&F Mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, bending spirally for hopping for columns, beam, chajjas etc hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed. |
| 55 | M&L for reinforced cement concrete 1:2:4, (nominal mix) Type B-1, using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 56 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 57 | M&L for Granite (of any type) tiles 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete & including 10 mm thick (average thickness) CM (1:3) screed, complete all as specified and directed. |
| 58 | M&L for providing granite edge moulding to 18-20mm thick stone of counters vanities etc including machine polishing to edges to give high gloss finish etc complete all as specified and directed. |
| 59 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 60 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 61 | S&F 15 mm bore concealed Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls or laid in floors, complete all as specified and directed. |
| 62 | S&F 20 mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls or laid in floors, complete all as specified and directed. |
| 63 | M&L for cement concrete chequered cement concrete tiles 30cmx30cmx25mm thick, with grey pigment cement and pigment set and jointed and pointed in neat cement slurry in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 64 | S&F in repair, vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including P or S trap, complete all as specified and directed. |
| 65 | S&F for PVC water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 66 | S&F in repair 10 litre capacity PVC valveless, symphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe, complete all as specified and directed. |
| 67 | S&F health faucet (ABS Body) with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, complete all as specified and directed.Make : Hindware/ Parryware/ Cera or equivalent as approved. |
| 68 | S&F vitreous china wash hand basin white counter sunk of standard size including, chromium plated waste coupling, waste pipe of size 32mm dia etc., (incl all waste fittings), complete all as specified and directed. |
| 69 | S&F Brass CP wall Mixer valve( 03 in 01) for mixing hot and cold water screwed down for 15mm dia iron pipe, complete all as specified and directed. |
| 70 | S&F in repair 15mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed. |
| 71 | S&F Brass CP WHB swan neck Mixer valve for mixing hot and cold water screwed down for 15mm dia iron pipe, complete all as specified and directed. |
| 72 | S&F in repair stainless steel grating openable 100mm Square size with hole including fixing with white cement complete all as specified and directed. |
| 73 | S&F in repair 15mm fancy type, chromium plated Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 74 | S&F in repair brass chromium plated, towel rail, 20mm dia, D-type, 60cm long between flanges, complete all as specified and directed. |
| 75 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. |
| 76 | S&F in repair 600x450 mm size beveled edge looking mirror of selected quality glass mounted on 12mm thick marine plywood with powder coated aluminium frame alround and fixed with wooden plugs, CP screws, cup and washers, complete all as specified and directed. |
| 77 | S&F in repair chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union of 15mm bore, complete all as specified and directed |
| 78 | M&L for salt glazed stoneware gully trap 125/ 100 mm, square or round mouthed type P, complete all as specified and directed. |
| 79 | S&F in repair, PVC (SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 80 | Dismantling water tanks of capacity exc 250 & n.exc 500 ltrs and removing from site to store, complete all as specified and directed. |
| 81 | S&F for triple layer white colour 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks (cylindrical vertical with closed top)hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed. |
| 82 | S&F for triple layer white colour 1000 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes, complete all as specified and directed. |
| 83 | S&F in repair CP brass soap dish, complete all as specified and directed. |
| 84 | S&F in repair 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed. |
| 85 | S&F in repairs 75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed. |
| 86 | S&F in repairs PVC (SWR) bends, for 110mm bore pipes, with access doors, complete all as specified and directed. |
| 87 | S&F in repairs PVC (SWR) bends, for 75mm bore pipes, with access doors, complete all as specified and directed. |
| 88 | S&F in repairs PVC (SWR) bends, for 75mm bore pipes, complete all as specified and directed. |
| 89 | S&F PVC vent cowl 110mm, complete all as specified and directed. |
| 90 | S&F PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/ sinks, complete all as specified and directed. |
| 91 | S&F in repair ball valve of brass, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 92 | S&F in repair Gun-metal Gate valve, 20mm bore, screwed down, with iron wheel head, screwed both ends for iron pipe or unions complete all as specified and directed. |
| 93 | Taking down cement plaster on brick or stone walls including raking out joints hacking for key & scrubbing down with water etc complete all as specified and directed. |
| 94 | M&L for rendering 15mm thick, CM 1:6, on other than fair faces of brick work or concrete Surface finished even & smooth without using extra cement, complete all as specified and directed. |
| 95 | M&L for rendering 15mm thick on fair faces of brick work surfaces, finished even and fair on walls in CM 1:4, using water proofing compound complete all as specified and directed.Note: WPC shall be measured and paid for separately. |
| 96 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm and one coat water repellant paint appliedon new surfaces, complete all as specified and directed. |
| 97 | M&L for applying two coats of oil bound distemper on wall over primer over 1-2 mm (av-1.5 mm Thick wall care putty to achieve smooth and even surface including preparation of new plastered surface, complete all as specified and directed. |
| 98 | M&L for 3 mm thick wall care putty on wall and prepare the old /new surface even and smooth complete all as specified and directed. |
| 99 | Supply only Integral water proofing compound, complete all as specified and directed. |
| 100 | Excavation in post holes n.exc 0.50 Cum and getting out in hard / dense soil, complete all as specified and directed. |
| 101 | Excavation in trenches not exc. 1.50m wide and not exc. 1.50m depth for foundation, etc or for manholes/sewage lines etc, n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard/ dense soil complete all as specified and directed. |
| 102 | Excavation over areas in hard/dense soil n exc 1.5 m deep and getting out in hard and dense soil complete all as specified and directed. |
| 103 | Excavation over areas in hard/dense soil exc 1.5 m but n exc 3.00 m deep and getting out in hard and dense soil complete all as specified and directed. |
| 104 | M&L for plain cement concrete 1:4:8, Nominal mix, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete, complete all as specified and directed. |
| 105 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in hard/ dense soil complete all as specified and directed. |
| 106 | M&L for Wall floor Junction TreatmentStep Ii) Drilling (14 mm diameter, 600mm deep) (900x900mm distance)ii) Nozzle Fixing (STP Shalifix Dam - It quick -setting mortar) Step II - Injection Grouting i) Grouting Material (STP Shali Grout) ii) Injection Using a 2- bar hand or electric pressure grouting pumpiii) Nozzle Removal and Sealing with PMM mortar |
| 107 | Step III - Surface Preparationi) Plaster Removal & Surface cleaning to remove dirt ,debris and salt deposits Step IV - Bonding Coat applicationi) STP Shali SBR Latex Bond Coat (Mixed with 1 part Chemical,1Part Cement & 2 Parts Fine sand) |
| 108 | Step V - Punning and Waterproofing Coating i) Chemical Punning Applied to the surface ii) STP Shali chem EWP Coating (2 Coats) iv) Sand Sprinkle for bonding with plasterStep VI - Final Coatingi) Shalifix FRM and SBR Latex (Mixed in a 1:4 Ratio)Note - Warranty and Maintenancei) 10 -Year Warranty - Ensuring a Permanent Solution to rising dampnessii) Regular Maintenance - Regular inspection to ensure treatment effectiveness. |
| 109 | Removing excavated material n exc.50m and deposited where directed at a level n exc 1.5 m above the starting point in soils, complete all as specified and directed. |
| 110 | Demolition and breaking up any 150mm drain pipes (salt glazed ware, AC, reinforced Concrete) set in cement mortar, complete all as specified and directed. |
| 111 | M&L for 150mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars, complete all as specified and directed. |
| 112 | M&L for concrete bed to drain pipes of 150mm dia including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2, complete all as specified and directed. |
| 113 | M&L for precast cement concrete 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in lintels, landings, cover slabs( for manholes etc) chullah hoods, chajjas, water trough, shelves and similar articles with plain set in CM 1:4, complete all as specified and directed.Note:- Reinforcement and handles shall be measured and paid separately. |
| 114 | M&L for PCC 1:3:6, type C-1, 20mm graded crushed stone aggregate as in drain PCC including fair finished drain or channel using extra cement including forms, moulds, mitered/ stopped ends etc., complete all as specified and directed. |
| 115 | M&L for PCC 1:2:4, type B-0, using 12.5mm graded mechanical crushed stone aggregate for benching, coping shall be 150mm in radius mixed with acrylic based polymer water proofing compound, complete all as specified and directed. Note: WPC shall be measured and paid separately. |
| 116 | Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , MCB, Main switches, call bell etc and making good to disturbed surface to wall ,floor etc to match with existing surface either by using same colour distemper or white colour wash, complete all as specified and directed. |
| 117 | Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity, complete all as specified and directed. |
| 118 | Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing, complete all as specified and directed. |
| 119 | M&L for point wiring with 1.5 sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through existing metallic/ rigid PVC concealed conduit including replacement of pressed steel terminal mounting box, for mounting fitting like modular switches, sockets, and fixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm size copper conductor cable green in colour as a earth wire and connected to common earth dolly for one light/ fan /bell/ Bldg security light point controlled by one single pole one way switch, complete all as specified and directed. |
| 120 | All as per Srl item No. 117.00 above but for one 3 pin, 5 Amp, socket outlet on the independent board controlled by one single pole one way switch board, complete all as specified and directed. |
| 121 | All as per Srl item No. 117.00 above but for one 3 pin, 5 Amp, socket outlet on the same board controlled by one single pole one way switch board, complete all as specified and directed. |
| 122 | All as per Srl item No. 117.00 above but for wiring with 2.5 sqmm copper cable and 2.5 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket outlet on independent board complete all as specified and directed. |
| 123 | S&F modular switch 1 way 6 Amp, 1 module, 240 V, flush type, complete all as specified and directed. |
| 124 | S&F modular bell push, flush type, 6 Amp, 1 module, 240 V, complete all as specified and directed. |
| 125 | S&F modular socket, 6A-2/3 pin combined, 2 module, 240 V, complete all as specified and directed. |
| 126 | S&F modular socket, 6Amp/ 16Amp-2/3 pin combined, 2 module, 240 V, complete all as specified and directed. |
| 127 | S&F modular switch 1 way, 16 Amp, 1 module, 240 V flush type, complete all as specified and directed. |
| 128 | S&F modular fan step regulator, 120 W, 2 module, 240 V, complete all as specified and directed. |
| 129 | S&F modular white cover plate with frame including modular metal flush box, 2 module/ 1 module, complete all as specified and directed. |
| 130 | S&F modular white cover plate with frame including modular metal flush box, 3 module, complete all as specified and directed. |
| 131 | S&F modular white cover plate with frame including modular metal flush box, 4 module, complete all as specified and directed. |
| 132 | S&F modular white cover plate with frame including modular metal flush box, 6 module complete all as specified and directed. |
| 133 | S&F modular white cover plate with frame including modular metal flush box, 8 module/ 12 module complete all as specified and directed. |
| 134 | S&F ceiling rose polycarbonate body, 65 x 20 mm three terminal complete all as specified and directed. |
| 135 | S&F for lamp holder pvc body with back plate complete with 9 Watt LED lamp, complete all as specified and directed. |
| 136 | S&F VTPN MCCB distribution board, 4 way, fabricated out of thick high quality CRCA sheet with MCCB thermal based release adjustable type 4 pole, 125 Amps, 50 Hz, 415 Volts with rupturing capacity 36 KA, DBs shall be totally enclosed, suitable for 240V/ 415V, having polyurethane (PU) foam gasket to ensure IP-43 degree of protection for Indoor application as pre IEC 61439-3:2012 (CI. 10.3)/IEC 60529. DB shall be robust with tested for impact resistance IK09as per IEC 61439-3:2012(CI.No. 10.2.6). DBs shall be provided with prefitted cement Guard. DB Door shall have detachable gland plates provided with proper knockout holes of 26mm/ 35mm diameter for insertion of cable/ conduits. Distribution Boards shall be provided with wire set of copper along with the insulated fork type bus bars. DB shall have reversible hinged doors and possibility to allow door opening from left to right or right to left for convenience on site. DB shall have type test reports as per IEC 61439-3 from ERDA or NABL laboratory complete all as specified and directed. |
| 137 | S&F sheet metal enclosures for MCB distribution board SPN 8 way double door type with 200 amp rated bus bar and suitable for MCB SPN as incomer, complete all as specified and directed. |
| 138 | S&F MCB SPN, 240 volts, 40 to 63 Amps, rupturing capacity 10 KA, ‘B’ curve type, complete all as specified and directed. |
| 139 | S&F MCB SP, 6-32 Amp, 240 V, 10 KA, B Curve including all terminals, fittings etc. complete all as specified and directed. |
| 140 | M&L for replacement of call bell electric (ding dong type), 240 Volt, single pole, complete all as specified and directed. |
| 141 | M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS-H cable drawn in and including PVC rigid conduit 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 6 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring complete all as specified and directed. Note: Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run. |
| 142 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr normal ground level) and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6, type C-2, all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed. |
| 143 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 144 | S&F in replacement LED tube light fitting 4 feet, 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 145 | S&F indoor decorative wall brackets light fixture made up of Polycarbonate, suitable for 9/11 Watt, LED lamp, B-22 base with plastic body complete with 9/11 W LED Bulb, complete all as specified and directed. |
| 146 | S&F LED luminaire 600x600mm, 35/36 watt, 220 V, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed. |
| 147 | S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 liter, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc., complete all as specified and directed. |
| 148 | S&F in replacement Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amps MCB of 'C' series, complete all as specified and directed. |
| 149 | S&F PVC connection 15mm size with brass nuts of length 450 mm for Hot/ cold water supply duly ISI marked complete all as specified and directed. |
| 150 | S&F 15mm stop valve, cast copper alloy fancy type, chromium plated screwed down, high pressure with crutch or butterfly handle screwed both side for iron pipe 15 mm bore duly ISI marked, complete all as specified and directed. |
| 151 | S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm, complete all as specified and directed. |
| 152 | Cutting holes in brick walls built in cement mortar area n exc 150 Sqcm, depth n exc 15cm making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and directed. |
| 153 | S&F in repair LED bldg security light fitting 35 Watt, 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 154 | S&F study lamp/ table lamp with quality CFL/ LED light bulb and material with conical shade over writing shelf with standard perfect height complete all as specified and directed. |
| 155 | S&F in repair on load change over switch 4 pole, 100 Amps, cap with centre handle in sheet steel enclosure complete all as specified and directed. |
| 156 | S&F in repair 1.5 Sqmm (Nominal area), FRLS-H, PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor, complete all as specified and directed. |
| 157 | Supply, laying, jointing and testing XLPE insulated, armoured, electric cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 Sqmm, 2 core confirming to IS:7098-1985 laid in trenches, in floor, in duct, through pipes or along the pole, complete all as specified and directed. |
| 158 | Supply, fixing and laying of HDPE double wall corrugated (DWC) duct pipe 50 mm dia of pressure rating 6Kgf/Cm2 as per IS: 16205 fixing on poles, walls under floors, laying on surface etc or as reqd at site, complete all as specified and directed. |
| 159 | Excavation in trenches in soft/ loose soil n. exc. 1.5 meter wide and n. exc. 1.5 meter deep and not exc 10 Sqm on plan, for laying of cable and getting out, complete all as specified and directed. |
| 160 | M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified and directed. Note: i) Excavation and earth work measured and paid separately. Ii) Punned down thickness shall be measured. |
| 161 | S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable, complete all as specified and directed. Note: Excavation and earth work measured and paid separately. |
| 162 | S&F in repair for GI pipe light grade of size 40mm dia laying in trenches/ under floor/ on walls for protection of UG cables, complete all as specified and directed. Please Enable Macros to View BoQ information |
