|
| 1 | Contract Details |
| 2 | Dismantling structural steel work of any description complete all as specified and directed |
| 3 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed |
| 4 | M&L For Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers notexceeding 25 cm, in hard/dense soil,complete all as specified and directed |
| 5 | M&L For Cement concrete Type D2,1:4:8 (40mm graded Aggregate) in foundations,filling and mass concrete complete all as specified and directed |
| 6 | M&L For Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed |
| 7 | M&L For Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 8 | M&L For Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed |
| 9 | Dismantling of 100mm CI or reinforced concrete drain pipes,jointed in cement mortar and taking out of trenches,if required |
| 10 | S&F For 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 11 | S&F For PVC (SWR) bends in 110mm radious complete all as specified and directed |
| 12 | S&F in repair FRP Bench of heavy duty and out door FRP sheeting bench 3 seater ASIN:B07S1WFKLW of following description: Cast iron leg support weighing 17kg per leg painted with paint of any colour 8x5 feet long 4mm thick FRP slat strong enough to hold weight up to 350 kg distributed accross length nuts and bolts and plastic caps for FRP slats will be supply along the product comes in knock down condition for easy for transportation and assembly will be provided by firm/coy all as per directed |
| 13 | M&L For Demolision of Concrete of any description andin any position not otherwisespecifically provided complete all as specified and directed |
| 14 | M&L For 100mm thick Cement concrete type B- 2,1:2:4 (40mm graded aggregate) complete all as specified and directed |
| 15 | M&L For Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed |
| 16 | M&L For Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 17 | M&L For Preparation of New concrete Surfaces plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint over one coat of priming paint plaster coat & 2 coat of synthetic enamel paint complete all as specified and directed |
| 18 | M&L For Preparation of New steel surfaces of any description, over 10cm in width or girth,Over one coat of Red oxide,Zinc chrome & 2 Coat of synthetic enamel paint complete all as specified and directed |
| 19 | Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract. Please Enable Macros to View BoQ information |
