|
| 1 | Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 3 | S&F for Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 4 | S&F for Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 5 | M & L for Solid PVC Frame for door,kitchen cabinet,cupboard of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 6 | S&F Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed. |
| 7 | S&F Second class hardwood Flush shutters 35mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. |
| 8 | S&F Factory made solid panel PVC door shutter 30 mm thick (style)both side prelam pvc sheet of decortive choice consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed. |
| 9 | S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded .Note: wire mesh and sheet glass shall be measured & paid separtely under respective items.. |
| 10 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples . The wirewesh to be supperted by MS/other metal jalli of min 15mm to 30mm of 18 gauge in the same supprt area of wire mesh etc complete all as specified and directed. |
| 11 | S & F 4mm th Sheet glass, ordinary quality in square in not exc 0.5 sq.m in each pane complete all as specified and directed. |
| 12 | S & F 4mm thick Figured glass, pin head type in squares in n exc 0.5 sq.m in each pane complete all as specified and directed. |
| 13 | M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0. complete all as spesified and directed . |
| 14 | M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 15 | M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 16 | M&L for PCC 1:3:6 type C-1 using 12.5 mm granted stone aggregate as hold fast/filling in pressed steel frame complete all as specified and directed |
| 17 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as spesified and directed . |
| 18 | S&F 300 mm long SS with dia 16mm, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.complete all as spesified and directed . |
| 19 | S&F 250 mm long SS with dia 16mm, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.complete all as spesified and directed . |
| 20 | S & F 125 mm long SS handles, fabricated type, anodised.complete all as spesified and directed . |
| 21 | S & F 200 mm long SS barrel tower bolts of extruded section.complete all as spesified and directed . |
| 22 | S&F for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spesified and directed . |
| 23 | S&F for 150mm Floor door stopper of SS body and tongue, with hard drawn steel spring, fixed in floor complete all as spesified and directed . |
| 24 | S&F for rubber beading door seal 40x 5mm strip in bottom of door complete all as specified and directed. Please Enable Macros to View BoQ information |
| 25 | S&F for rubber beading door seal 40x 5mm strip in bottom of door complete all as specified and directed. Please Enable Macros to View BoQ information |
