Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling of barbed wire fencing / concertina coil etc.& removal from site. Complete all as specified and directed by Engr-in-charges. |
| 2 | Dismantling structural steel work in-cluding doors, gates but excluding framed truss etc Complete all as specified and directed by Engr-in-charges. |
| 3 | Dismantling of RCC fencing post or struts of any description/section including taking out embeded ,barbed wire in concrete and making good disturbed Complete all as specified and directed by Engr-in-charges. |
| 4 | Excavating in post holes (of similar holes) each n. Exc. 0.50 cum getting out in soft/loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance n. Exc. 50m and making good surface Complete all as specified and directed by Engr-in-charges. |
| 5 | Surface dressing n exc. 15 cm deep and getting out in soft or loose soil, Complete all as specified and directed by Engr-in-charges. |
| 6 | M&L PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete Complete all as specified and directed by Engr-in-charges. |
| 7 | M&L PCC (1:3:6) type C2 using 20mm graded crushed stone aggregate as in foundation, post holes filling and mass concrete Complete all as specified and directed by Engr-in-charges. |
| 8 | M&L precast cement concrete block masonry with solid blocks made of PCC (1:3:6) type C1 using 20mm graded stone aggregate exc 10cm in width and set in CM 1:6 Complete all as specified and directed by Engr-in-charges. |
| 9 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint Complete all as specified and directed by Engr-in-charges. |
| 10 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc Complete all as specified and directed by Engr-in-charges. |
| 11 | S&F MS Angle iron section with swan neck/Y junction as in fencing posts struts including notching drilling holes for wire mesh etc and flat iron fillets for securing wire mesh etc including all necessary drilling, bolting or riveting and similar work conforming to Fe-290 Gde E-165 Complete all as specified and directed by Engr-in-charges. |
| 12 | S&F MS Framed work as in door or gates of angle ,MS hollow pipes, solid SQ sections Flat iron etc or other section with gusset plates, rails, braces etc complete with steel sheetingas required to be prepared for hanging or sliding with and including MS Channel as posts & hold fasts & suitable arrangements for locking etc complete all as specified & directed conforming to Fe 290.Gde E165. Complete all as specified and directed by Engr-in-charges. |
| 13 | S&F kicking plates, any size, of galvanised iron sheet 1mm thick, fixed with galvanised screws complete all as specified and directed by Engr-in-charges. |
| 14 | S&F welding cast iron designer pieces ornamental type with intricate designs & like spirals , Spikes etc as per sample fixed to steel gate by welding. Complete all as specified and directed by Engr-in-charges. |
| 15 | S &F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other end, each screwed end to be fitted with washeres and one haxagonal or square nut not exceeding 5cm long with dia of neck 5 to 11 mm Complete all as specified and directed by Engr-in-charges. |
| 16 | Supply only of chain link MS galvanised fencing of any description Complete all as specified and directed by Engr-in-charges. Note:- Per unit weight of chain link fencing shall be determined by the BOO detailed by GE. |
| 17 | Fixing only mild steel galvanised chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts etc including provn of binding wire if reqd Complete all as specified and directed by Engr-in-charges. |
| 18 | S&F of Mild steel round bars 10mm dia cut to length bent to shape required including cranking bending etc of Gde Fe 410W (Gde E-250) quality A or Fe 290 (Gde E-165) Complete all as specified and directed by Engr-in-charges. |
| 19 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) Complete all as specified and directed by Engr-in-charges. |
| 20 | Supply and Fixing of concertina coil as 600mm dia rounded 50 circles covering in 10RM of requisite thickness with necessary fixing material Complete all as specified and directed by Engr-in-charges. |
| 21 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with 6mm top layers of ante abrasive material (ruberised) approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; Complete all as specified and directed by Engr-in-charges. |
| 22 | M&L for providing precast cement concrete type B-1 1:2:4 (using 20mm graded stone agg) as in kerb stone etc (of any section as approved) with plain faces , including chamfers,weathering,throating etc and setting in cement mortar 1:4 complete with joints to match. Complete all as specified and directed by Engr-in-charges. |
| 23 | S&F of Providing type B0 1:2:4 (12.5 mm graded aggregate) precast cement concrete louvres and jallies, 25mm thick (mea sured solid), including all mould- ings of set in CM 1:6 , and including demoliation of existing jallies and removed from MoD land Complete all as specified and directed by Engr-in-charges. |
| 24 | S &F of Providing type B0 1:2:4 (12.5 mm graded aggregate) precast cement concrete moulded pillar including moulding and set in CM 1:4 and including demolation of existing jallies and removed from MoD land Complete all as specified and directed by Engr-in-charges. |
| 25 | Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter of flate and fair finish surface Complete all as specified and directed by Engr-in-charges. |
| 26 | Use and waste of Formwork to sides of pillars,posts, struts, piers, columns and stanchions and similar work; vertical or to batter of flate and fair finish surface Complete all as specified and directed by Engr-in-charges. |
| 27 | M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for column,beams, Roof Complete all as specified and directed by Engr-in-charges. |
| 28 | M & L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Complete all as specified and directed by Engr-in-charges. |
| 29 | M & L for RCC nominal Mix Type B1, 1:2:4 (20mm graded aggregate) using 20 mm graded stone aggregate as in Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete beam, etc. Complete all as specified and directed by Engr-in-charges. |
| 30 | M & L for RCC nominal Mix Type B1, 1:2:4 (20mm graded aggregate) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts etc. Complete all as specified and directed by Engr-in-charges. |
| 31 | Demolition of stone/boulder masonry, block masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles Complete all as specified and directed by Engr-in-charges. |
| 32 | M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 Complete all as specified and directed by Engr-in-charges. |
| 33 | All as above item No. 32 but except stone complete incl cleaning of old mortar from stones etc Complete all as specified and directed by Engr-in-charges. |
| 34 | Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing Complete all as specified and directed by Engr-in-charges. |
| 35 | M&L for face work masonry with 100-125 mm thick white / chitter sand stone having rock face bushings not less than 15-20 mm incl chisel drafted margin 20-25 mm wide all as per local Jodhpur Pattern (KADAOU) regular coursed well bonded bedded & solidly hearted built in CM 1:4 complete all as specified . Height of Kadaou stone course shall not be less than 200mm Complete all as specified and directed by Engr-in-charges. |
| 36 | M&L for sand stone moulded weathered copings , window cills & the likes set in CM 1:6 with corbelling , throatings all as per design Complete all as specified and directed by Engr-in-charges. |
| 37 | M&L for keyed pointing to kadaou facework of Jodhpur sandstone in CM 1:3 using white cement & pigment to match the shade of the stone. Complete all as specified and directed by Engr-in-charges. |
| 38 | Taking down old sand stone/precast cement concrete chattri over all size 0.6x0.75x1.2m removal away frome site etc Complete all as specified and directed by Engr-in-charges. |
| 39 | M&L for fixing in position of Sand Stone Chattri Jodhpur pattern Square/rectunglar shape each side of length 60 to 60 cm & height not less than 0.75m ( excluding dome) incl 4 nos sand stone columns, sand stone arches , brackets & snad stone dome slab of minimum 75 cm height of approved shape & carvings incl 1 No Brass finials of ht 0.30 m complete all as per trade pattern of interlocking & fixing of parts with suitable solvent cement adhesive Complete all as specified and directed by Engr-in-charges. |
| 40 | S & F of Fibre glass reinforced translucent 2-3 mm thick plan sheeting with two side lap fixed with coach screw and washer in fencing, wall etc Complete all as specified and directed by Engr-in-charges. |
| 41 | Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) and removing debris out of MOD land Complete all as specified and directed by Engr-in-charges. |
| 42 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engr-in-charges. |
| 43 | M&L for 25mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) complete all as specified and directed by Engr-in-charges. |
| 44 | M&L Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including M&L 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed by Engr-in-charges. |
| 45 | All as above item No. 44 but on vertical surface such as skirting, dados and risers to step etc complete all as specified and directed by Engr-in-charges. |
| 46 | M&L Non-skid coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including over 15 mm thick screed bed or bedding layers in CM (1:6) for laying in floors finishing complete all as specified and directed by Engr-in-charges. |
| 47 | M&L for glazed colour ceramic tiles of size 450X 350X 7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles complete all as specified and directed by Engr-in-charges. |
| 48 | Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-charges. |
| 49 | M&L for 15mm thick rendering in CM 1:4 finished even and smooth without extra cement on stone wall surface complete all as specified & directed by Engineer-in-charge. |
| 50 | M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling all as directed & finished even & smooth complete all as specified and directed by Engr-in-charges. |
| 51 | M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface complete all as specified and directed by Engr-in-charges. |
| 52 | M&L for preparing surfaces plastered or unplasterd on new surfaces applying 2 coats of Oil Bound distemper over 2mm thick wall putty finished to a even and smooth finish over a coat of alkali primer complete all as specifed directed by Engr-in-charge. |
| 53 | M&L for preparing surfaces plastered or unplasterd on new surfaces with 2 coats of Oil Bound distemper on Ceilings finished to a even and smooth finish complete all as specifed directed by Engr-in-charge. |
| 54 | M&L for complete removal of existing treatment on old plastered surfaces of wall & applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-charges. |
| 55 | Taking down chawkhats with shutters (without taking off shutters from the frames) area n exc 1.50 Sqm & removal to store complete all as specified and directed by Engr-in-charges. |
| 56 | Taking down chowkhats or frames exc 1.5 Sqm but not exceeding 4.0 Sqm each without taking off shutter from the frame complete all as specified & directed by Engineer-in-charge. |
| 57 | M&L PCC (1:2:4) type B-0 using 12.5 mm aggregate in filling pressed steel door frame, concrete shall be compressed all as specified and directed.complete all as specified and directed by Engr-in-charges. |
| 58 | S&F of pressed steel frames of size 165x60mm for doors with one or more rebates incl necessary fixing lugs,hinges,lock strice plate etc including complete all as specified & directed by Engineer-in-charge. |
| 59 | S&F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with both face covered with decorative face veneer with lipping/frame to match, complete all as specified & directed by Engineer-in-charge. |
| 60 | Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. |
| 61 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete all as specified and directed by Engr-in-charges. |
| 62 | M & L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and directed by Engr-in-charges. |
| 63 | M&L for fabrication of powder coated aluminium frame work as in frames for aluminium windows, Ventilators & Doors with aluminium section weighing 0.55 kg/m with or without rebate or for sliding windows(two track/three track ) , ventilators etc with louvers having suitable mechanism for tilting , U shaped fillets complete all as specified and directed by Engr-in-charges. |
| 64 | M&L for Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, 2tower bolts, 1mortice lock of vertical type brass 4 levers size 65mm and anodised aluminium snap beading screws etc, complete all as specified and directed by Engr-in-charges. |
| 65 | M&L for pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators.complete all as specified and directed by Engr-in-charges. |
| 66 | S&F for Pre powder coated aluminium window shutters prepared for sliding or hanging or fixed etc including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws and also including handles, tower bolt, locks and hinges etc. complete using aluminium section weighing 0.55kg/m Complete all as specified and directed by Engr-in-charges. |
| 67 | S&F in repair 12 mm thick toughened glass as in door/window or partition complete including design etching work /sun control film as directed and all necessary stainless steel fittings arrangement like hinges, clips, handle etc, complete all as specified & directed by Engineer-in-charge. |
| 68 | S&F Aluminium ( extruded section Body ) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.complete all as specified and directed by Engr-in-charges. |
| 69 | S & F of mild steel butt hinges, cold rolled, medium weight 100 mm size complete all as specified and directed by Engr-in-charges. |
| 70 | S & F of stainless steel butt hinges 100 mm size medium weight complete all as specified and directed by Engr-in-charges. |
| 71 | S & F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 140mm long complete all as specified and directed by Engr-in-charges. |
| 72 | S & F of mild steel barrel tower bolt 150 mm long stove enamelled black with bright bolt complete all as specified and directed by Engr-in-charges. |
| 73 | S & F Mild steel pressed handles 150mm size, oval type, stove enamelled black, pattern and design Complete all as specified and directed by Engr-in-charges. |
| 74 | S & F of mild steel sliding door bolt 300 mm long stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate.complete all as specified and directed by Engr-in-charges. |
| 75 | S & F in repair of bibcock 15mm dia, cast copper alloy fancy type, screwed for iron pipe or for brass ferrule all as specified.complete all as specified and directed by Engr-in-charges. |
| 76 | S & F in repair Fancy type Chromium plated shower roses 125mm size with arm, with or without swivel joints, 15mm bore, including fixing to steel pipe or union.complete all as specified and directed by Engr-in-charges. |
| 77 | S & F in repair concealed stop valves cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle screwed both ends for 20mm bore of iron pipe or union and fixed in repair complete all as specified and directed by Engr-in-charges. |
| 78 | S & F 4 mm thick pin headed figured glass with oil putty in square n exc 0.5 sqm in each pane in small widths as in louvers of ventilators complete all as specified and directed by Engr-in-Charges. |
| 79 | S & F for 3 mm thick plain glass ordinary quality & glazing complete all as specified and directed by Engr-in-Charges. |
| 80 | S & F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface complete all as specified and directed by Engr-in-Charges. |
| 81 | S & F SS decorative fancy type 25mm curtain rod with fixing brackets, knob etc as in repairs complete all as specified and directed by Engr-in-Charges. |
| 82 | S & F as in repair vitreous china wash down water closet European Type pedestal pattern with seat & cover as in repairs with jet spray complete incl fixing of flush pipe etc complete all as specified and directed by Engr-in-Charges. |
| 83 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed complete all as specified and directed by Engr-in-Charges. |
| 84 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore as directed complete all as specified and directed by Engr-in-Charges. |
| 85 | S & F 75mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engr-in-Charges. |
| 86 | All as per item 86 above but 110mm dia complete all as specified and directed by Engr-in-Charges. |
| 87 | S&F 110mm dia UPVC (SWR) bends any radius including cutting of holes.complete all as specified and directed by Engr-in-Charges. |
| 88 | S&F 110mm dia UPVC (SWR) branch piece single (single 'Y') equal or unequal.complete all as specified and directed by Engr-in-Charges. |
| 89 | S&F 110mm dia UPVC (SWR) branch piece double (double 'Y') equal or unequal.complete all as specified and directed by Engr-in-Charges. |
| 90 | All as per Item No 87 above but 75mm dia UPVC (SWR) complete all as specified and directed by Engr-in-Charges. |
| 91 | All as per Item No 88 above but 75mm dia UPVC (SWR) complete all as specified and directed by Engr-in-Charges. |
| 92 | All as per Item No 89 above but 75mm dia UPVC (SWR) complete all as specified and directed by Engr-in-Charges. |
| 93 | M&L for 75mm dia UPVC (SWR) floor trap, plain with grating including jointing with solvant cement complete all as specified and directed by Engr-in-Charges. |
| 94 | M&L for UPVC (SWR) gully trap 125/110 mm setting and jointing with solvant cement complete all as specified and directed by Engr-in-Charges. |
| 95 | S &F in repair 25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia complete all as specified and directed by Engr-in-Charges. |
| 96 | S&F as in repairs 15mm bore CP brass angular stop cock fancy type screwed for iron pipe or ferrule and fixed complete all as specified and directed by Engr-in-Charges. |
| 97 | S & F as in repairs 15 mm dia two way angular stop cock with chromium plated long thread with flange complete all as specified and directed by Engr-in-Charges. |
| 98 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charges. |
| 99 | S & F low level flusing cistern PVC valveless, syphonic action 10 ltrs capacity with float valves (ISI Marked) white/lvory with inlet ball valve complete incl S&F 15mm bore PVC connection (for Flushing cistern) 600mm long best quality with PTMT nuts complete all as specified and directed by Engr-in-Charges. |
| 100 | S & F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified of cap 1000 ltr incl 25 mm dia CPVC tank adaptor including taking down existing tanks of any description n exc 1000 ltrs capacity and removing from site complete all as specified & directed by Engineer-in-charge. |
| 101 | S & F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charges. |
| 102 | Supply only Integral water proofing compund complete all as specified and directed by Engr-in-Charges. |
| 103 | Taking down or up steel tubing and connection including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-Charges. |
| 104 | (b) 20 mm dia |
| 105 | (c ) 15 mm dia |
| 106 | Supplying and laying of CPVC pipes, SDR 11 & Plain CPVC SDR 11 including all brass fittings, laid in trenches or ceiling or fixed to wall including cutting chases, pinning in & making good to disturbed portion complete all as specified and directed by Engr-in-Charges. |
| 107 | (a) 20 mm dia |
| 108 | (b) 16 mm dia |
| 109 | Demolition of cement concrete (unreinforced) of any description and any position not otherwise specifically provided for (roof padding/roof kerb etc) including dismantling of existing membrane and cement mortar and removal of debris outside of MOD land complete all as specified and directed by Engr-in-Charges. |
| 110 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof padding over old cleaned surface of any description on roof/terrace to fill any depressions etc or to obtain desired slopes.complete all as specified and directed by Engr-in-Charges. |
| 111 | M&L Rendering 20mm thick in cement mortar (1:4), mixed with integral water proofing liquid all as per manufacturer's instructions over concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed by Engr-in-Charges. |
| 112 | M&L for carrying out water proofing treatment for roofs in the following stages - . (ii) Material and labour for UV stable single component fibre reinforced elastomeric liquid applied waterproofing membrane having solid content of 55% formulated wih PU hybrid polymers and reinforcing acrylic fibres and having sun reflectivity Index (SRI) of 106. The application of the material should be done in three coat (6 hr gap after each coat) on the substrate, applying first self priming coat at ratio of damp proof ultra and water 3:1 then 2 undiluted coat of damp proof ultra obtaining coverage @1 ltr/10 sqft in two coats (10-12 hrs gap between each coat. The vital physical and chemical parameters shall be as under. Min elongationat break of 350%, crack bridging ability of 2.5 mm @650 microns thickness, resists positive hydrostatic pressure of up to 10 bars. The material shall be appliied with brush or roller, complete in all respect as per the direction of Engr-in charge/consultant. Also, proper surface preparation along with covingat corners is must. Note : - The work shall be executed by the authorized applicator of the manufacturer only. Complete all as specified and directed by Engr-in-charges. Note : - 1.The authorized applicator of manufacturer shall be approved by GE. 2.The color of final finish shall be decided by the GE |
| 113 | Dismantling of wall and ceiling board (fibre, pulp, insulation, etc) or insulation board/slabs /blankets of any thickness including cover fillets complete all as specified & directed by Engineer-in-charge. |
| 114 | S&F anodised aluminium snap grid frame work of pre powder coated pre fabricated GI section (Including hangers) for false ceiling of size 600x600mm with ceiling board of PVC laminated gypsum board 10-12 mm thick and fixed as per manufacturer instruction including as per sample approved by GE , complete all as specified & directed by Engineer-in-Charge. |
| 115 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed by Engr-in-Charges. |
| 116 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.complete all as specified and directed by Engr-in-Charges. |
| 117 | S & F in repairs 15mm dia pillar taps fancy type cast copper alloy with capstan heads, CP screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed.complete all as specified and directed by Engr-in-Charges. |
| 118 | S & F in repair 15mm bore bib taps, chromium plated of fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed Complete all as specified and directed by Engr-in-charges. |
| 119 | M &L for Rough dressed sand stone slab flooring, bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed by Engr-in-Charges. |
| 120 | M&L for 75 mm thick Cement concrete type D-2,1:4:8 (40 mm graded agg) as in sub base to floors incl well compacting & laid to levels complete all as specified and directed by Engr-in-Charges. |
| 121 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour (red and yellow only), design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand and complete all as specified and directed by Engr-in-Charges. |
| 122 | S&F in repair of wall hung corner Vitreous China wash basin size 450x300 mm with padestal, white, flat back, including 32 mm CP waste coupling, waste pipe, PVC Connection 450 mm long, brackets complete all as specified and directed by Engr-in-Charges. |
| 123 | S&F in replacement of Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed by Engr-in-Charges. |
| 124 | S&F Vitreous china urinal half stall type with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified and directed by Engr-in-Charges. |
| 125 | M&L 18 to 20 mm thick Black granite stone in single piece in cooking plateform, slab for oval type WHB, sink / cills etc complete laid over 15mm thick rendering layer in CM 1:3 and jointed with white cement with admixture of pigment to match shade of granite stone including grinding and polishing complete and providing necessary holes for gas pipe / water supply pipe etc. complete all as specified and directed by Engr-in-Charges. |
| 126 | M&L for rounding of the edges of stone slabs as in cooking platforms , treads of steps shelves & cills etc complete all as specified and directed by Engr-in-Charges. |
| 127 | Taking down carefully cement conc /spalled out concrete from RCC roof projections, cilinigs ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc complete all as specified and directed by Engr-in-Charges. |
| 128 | M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth without using extra cement complete all as specified and directed by Engr-in-Charges. |
| 129 | S&F GI wire netting 0.90 mm dia and 12 mm mesh lathing to metal studding in walls,ceilings, stanchions, beams, RCC chajjas/Facias etc,including laps,cutting and waste complete all as specified and directed by Engr-in-Charges. |
| 130 | Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar complete all as specified and directed by Engr-in-Charges. |
| 131 | M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 Complete all as specified and directed by Engr-in-charges. |
| 132 | S&F in repair Soap dish, brass cromium plated , any type, fixed to plugs with chromium plated brass screws Complete all as specified and directed by Engr-in-charges. |
| 133 | S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) Complete all as specified and directed by Engr-in-charges. |
| 134 | S&F 600mmx450mm bevelled edge mirror of selected quality glass,mounted on 6 mm thick AC building boards or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engr-in-Charges. |
| 135 | S&F as in repairs Corner Glass shelf assembly consisting of 5.5cm thick sheet glass 250mm wide superior quality with CP tubular framing & brackets guard and railing 60cm long Complete all as specified and directed by Engr-in-charges. |
| 136 | S&F providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line,level and curvature,jointed with cement mortar 1:3,including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm),including making drainage opening wherever required complete all as specified and directed by Engr-in-Charges. |
| 137 | S&F Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm including brass waste coupling, PVC wastepipe Complete all as specified and directed by Engr-in-charges. |
| 138 | Demolition of reinforced cement concrete (reinforcement cut as req. to faciliate demolition) of any description for roof,colums ,beam of any type etc complete all as specified and directed by Engr-in-Charges. (removing demolished material outside MD land). |
| 139 | M&L for 15 mm thick rendering on floor and vertical side of sunken floor of stone masonry surfaces/brick work/concrete surfaces in CM (1:3) mixed with liquid water proofing compound @ 0.200 litre per bag of 50 kg of cement and finished even and smooth without using extra cement and applying a coat of bitumen 30/40 @ 1.50 kg/sqm and laying 200 micron polythene film complete all as specified and directed by Engr-in-Charge. NOTE:- Liquid water proofing compound shall be measured and paid for separately as “Supply only”. |
| 140 | M&L for cement concrete (1:5:10) type E-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete/sunken floors Complete all as specified and directed by Engr-in-charges. |
| 141 | M&L for 7.5cms thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 142 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft loose soil ,complete all as specified and directed by Engr-in-Charge. |
| 143 | Returning, filling in,including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft loose soil ,complete all as specified and directed by Engr-in-Charge. |
| 144 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 145 | M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of 150mm bore pipes after they are laid and tested; in Cement conc 1:4:8 type D2 using 40 mm graded stone agg complete all as specified and directed by Engr-in-Charge. |
| 146 | M&L for 150 mm bore Salt-glazed stoneware drain pipes of grade 'A' laid in trenches and jointed Complete all as specified and directed by Engr-in-charges. |
| 147 | Taking down carefully aluminium point wiring for light, fan, bell socket power socket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc Complete all as specified and directed by Engr-in-charges. |
| 148 | Taking down carefully sub-main wiring (with DB any type) of any size and making good to ther disturbed surfaces to match the existing Complete all as specified and directed by Engr-in-charges. |
| 149 | M&L for modular point wiring complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit 20mm dia with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FR-LSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of modular switches, sockets, fan regulators Complete all as specified and directed by Engr-in-charges. complete for the following :-(a) One light/fan/bell point controlled by one, one way switch. |
| 150 | All as per item No. 145 above but one 5 pin 5 or 6 Amps socket outlet on same board. Complete all as specified and directed by Engr-in-charges. |
| 151 | All as per item No. 145 above but one 5 pin 5 or 6 Amps socket outlet on independent board. Complete all as specified and directed by Engr-in-charges. |
| 152 | All as per item No 145 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board. Complete all as specified and directed by Engr-in-charges. |
| 153 | S&F modular switch 1 way 6 Amp, 1 module Complete all as specified and directed by Engr-in-charges. |
| 154 | S&F modular switch 1 way 16 Amp, 1 module Complete all as specified and directed by Engr-in-charges. |
| 155 | S&F modular socket 6 Amp, 2/3 pin combined 2 module Complete all as specified and directed by Engr-in-charges. |
| 156 | S&F modular socket 6 Amp/16 Amp, 6 pin combined 2 module Complete all as specified and directed by Engr-in-charges. |
| 157 | S&F ceiling rose surface bakelite 3 terminals 230 Volts AC with polycarbonate body Complete all as specified and directed by Engr-in-charges. |
| 158 | Supply and fixing Warm White LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including AC decorative box type with driver, holder including,copper conductor cable of suitable size from ceiling rose complete complete, 4 ft long Complete all as specified and directed by Engr-in-charges. |
| 159 | supply & Fixing Bldg security LED Light Luminaire of 35/45 Watts 230V AC outdoor type any make any size including GI pipe 40 mm bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable Complete all as specified and directed by Engr-in-charges. |
| 160 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-charge. |
| 161 | S&F Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm Complete all as specified and directed by Engr-in-charges. |
| 162 | Taking down and refixing ceiling Fan/exhaust fan at same location and including three core cable connected to ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 163 | S&F single pole and neutral enclosure with two pin and earth plug socket complete with one single pole MCB 20 Amp ‘C’ curve type, 230 volts, 10 KA. Complete all as specified and directed by Engr-in-charges. |
| 164 | S&F and testing factory made sheet metal enclosure for MCB DB TPN 4 way 415 volt with double door, IP - 43 protection duly fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type Complete all as specified and directed by Engr-in-charges. |
| 165 | S&F and testing factory made sheet metal enclosure for MCB DB SPN 12 way 240 volt with double door, IP - 43 protection duly fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type Complete all as specified and directed by Engr-in-charges. |
| 166 | S&F MCB triple pole and neutral 415 volts any rating from TPN 40 to 100 amps, with rupturing capacity 10 KA, 'C' curve type, with over load and short circuit protection. Complete all as specified and directed by Engr-in-charges. |
| 167 | S&F MCB single pole and neutral 240 volts any rating from SPN 40 to 63 amps, with rupturing capacity 10 KA, 'C' curve type, with over load and short circuit protection. Complete all as specified and directed by Engr-in-charges. |
| 168 | S&F MCB single pole 230 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, 'B' curve type, with over load and short circuit protection. Complete all as specified and directed by Engr-in-charges. |
| 169 | M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. Complete all as specified and directed by Engr-in-charges. NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length. |
| 170 | M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 4 Sqmm and one run of 4 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. complete as directed by Engineer-in-Charge. NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length. |
| 171 | Supply and laying or fixing or passing through pipe 1100volts grade heavy duty cable with XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm ,4 core in service connection. Complete all as specified and directed by Engr-in-charges. |
| 172 | Supply and laying sand for sand cushioning for cable protection in trenches Complete all as specified and directed by Engr-in-charges. SSR Part - 1.Note:. for the purpose of payment punned thickness will be measured. |
| 173 | Supply and laying Un reinforced Precast concrete cable cover class LV, type2, flat size 300 mm x 180 mm x 40mm Complete all as specified and directed by Engr-in-charges. |
| 174 | Supply and fix GI tubing medium grade of 40 mm dia for cable protection Complete all as specified and directed by Engr-in-charges. |
| 175 | M&L for in repairs earthing complete with galvanised steel earth electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including GI earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc. Complete all as specified and directed by Engr-in-charges. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
