|
| 1 | Civil works |
| 2 | Cleaning shurb jungle including uprooting rank vegetation, grass, bushes, shurbes,sapling removal of stumps of trees and disposal of unsevicable materials and stacking of servicable materials to be used up to lead of 1000 meters and as per direction of EIC. |
| 3 | Dismantling G.C.I or A.C sheet roofing after carefully removing the bolts and nuts including stacking the useful materials for reuse and removing the debris within 50m lead. including cost of all labours,T & P required for the work etc. Complete as directed by EIC. |
| 4 | Dismantling & removing doors, window & ventilators including removing frames, hinges, fastening & stacking the same for reuse & removing the debris from the work site etc completed as per direction of EIC. |
| 5 | Dismantling of brick or stone masonary in lime or cement mortar under 3 mtr height including stacking the useful materials for reuse & removing the debries from the work site etc complete as per direction of EIC. |
| 6 | Scraping old paint with scrappers, sand papers and washing with soap water or soda including cost of all labour,T & P etc. required to complete as per direction of EIC. |
| 7 | .Removing old lime and cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m. lead etc. complete as per the direction of EIC. |
| 8 | Removing old lime and cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m. lead etc. complete as per the direction of EIC. |
| 9 | Dismantling and removing 2.5cm thick artificial stone flooring including stacking the useful materials for reuse and removing the debris within 50m lead. including cost of all labours,T & P required for the work etc. Complete as directed by EIC. |
| 10 | Supply all Labour, Machinaries and T&P for shifting and stacking of working store materials to vacate store and restore after necessary repair of working store including all to complete the work in all respect as directed by EIC. |
| 11 | Loosening, levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction & clause 305 of MoRT&H Specified for Road & Bridge works (5th Revision) |
| 12 | Earth work in excavation of foundation treaches in all kinds of soil including moorum, stoney earth and earth mixed with boulders ( except sheet rocks and boulders requiring for blasting) including dressing and levelling the bed up to the required depth and depositing the excavated materials at places away from the work site with all leads and 1ifts, T&P shoring and shuttering and dewatering if required etc. comp. as directed by EIC. |
| 13 | Filling sand in F&P well watered, rammed including cost, conveyance, royalties of materials, cost of all labour and T&P required for the work etc. complete as per direction of EIC. |
| 14 | P.C.C .of prop.(1:3:6) in foundation using 40 mm. size broken hard granite metal of approved quality from approved quarry including lowering, laying concrete to required levels laid in layers not exceeding 150mm thick including cost, conveyance, royalties of all materials, watering and curing and cost of all labour, T&P required for the work etc. compleete as per direction of EIC. |
| 15 | 2.5 Cm. (1\\") thick A.S. flooring with C.C. (1:2:4) including punning using 12mm size black hard crusher broken granite chips laid over PCC (1:3:6) proper slope including rounding of corners, watering and curing with cost, conveyance, royalties of all materials and cost of all labour, T&P required for the work etc. complete as per the specification & direction of EIC |
| 16 | Fly ash brick masonry in C.M.(1:6) after immersing the bricks having minimum crushing strength of 75 Kg/Cm2 in water for 24 hours having size of 25cmx12cmx8cm in foundation & plinth with ornamental molding and other similar type of works with all necessary projections, splays corbelling, cutting, champering, including cost conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. compl. in all respect as per direction of EIC. |
| 17 | Fly ash brick masonry in C.M.(1:6) having minimum crushing strength of 75 Kg/Cm2 size of 25cmx12cmx8cm in Superstructure with ornamental molding and other similar type of works with all necessary projections, splays corbelling, cutting, champering, including cost conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. compl. in all respect as per direction of EIC. |
| 18 | Supplying, fitting and fixing of colour G.C.I sheet (0.40mm thick) in roof including shaft sealing screw etc. complete with cost, conveyance of all required fitting as directed by EIC. (GCI Sheet of Jindal./ TATA BLUE SCOPE) |
| 19 | Providing and fixing of factory made UPVC 2-track Sliding window complete, comprising UPVC multi-chambered frame of size 67mm x 54mm with wall thickness of 2.3mm (+-0.2 mm ) having in-built UPVC roller track on top and uPVC sash of size 64mm x 47mm with wall thickness of 2.3mm (+-0.2 mm ) duly reinforced with G.I. section 1.2 mm (+/- 0.2mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5 mm Clear Annealed glass in the sash, UPVC glazing bead, interlock, EPDM gasket, brush will be provided including hardware, i.e., touch lock and rollers & proper drainage system shall be provided. Window will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Architect or Engineer-In-Charge.(Torfenster / Lingel/ Encraft/ Koemmerling/ Fenesta / Builtfy) |
| 20 | Supplying, fitting, fixing of MS Shutters for Door and Windows with 40mm x 40mm MS frames with M.S. grills for window as per approved drawing and design given by EIC made out of standard rolled steel section 40mm x 40mm x 6mm size with corners of frames duly metered and electrically welded with 6 nos. of hold fast for doors and 4 nos. hold fast for windows with required nos. of 100mm and 14 SWG thick for door and 75mm and 14 SWG thick for windows including provision of 50mm hinges for cleats duly welded window frames are to be provided with M.S.Grills made out of MS Flat/ Square bar flat duly welded to the frame. The shuutter will be made out of MS sheet of 18 SWG sheet with required welding and polishing for smooth surface including one coat of anti-corrosive red oxide paint as per direction of EIC. |
| 21 | Supplying, fitting, fixing M.S. grills and Grill gate as per approved drawing and design given by EIC in all floors made out of standard rolled steel section with corners of frames duly metered and electrically welded with 6 nos. of hold fast Heavy duty hinged for Gates and 4 nos. hold fast for windows. The grills made with MS Square bar/ MD Flat as required in site conditions including one coat of anti-corrosive red oxide paint as per direction of EIC. |
| 22 | Providing and fixing of MS welded mesh of size 25x25 mm made up of 11 gauge wire including strengthening with nailss, wire or nuts, bolts and washers including cost, conveyance, loading & unloading of all materials, cost of labour, T&P etc required to complete the work as per direction of EIC |
| 23 | Providing 16 mm. thick cement plaster with cement mortar of mix (1:6) with finished smooth to rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and ,es of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. |
| 24 | Providing 12 mm. thick cement plaster with cement mortar of mix (1:6) with finished smooth to rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and ,es of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. |
| 25 | Finishing wall surface of walls with wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, labour T&P etc. complete the work as per the direction of engineer incharge. (Putty of JK/ Birla / ICI/Berger/Asian is to be used) |
| 26 | Providing two coats of plastic emulsion painting of approved shade (Washable type) over a coat of primer to give an even shade to surface of wall, including cost, conveyance of all materials, cost of all labour, T&P required for the work etc. complete as directed by EIC.( Paints of Berger/ ICI/ Nerolac / Asian to be used) |
| 27 | Weather coat two coats of approved brand and shade over a coat of primer over exterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/Berger/Asian is to be used) |
| 28 | 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. (Make: Gyproc) |
| 29 | Supplying, fitting, hoisting, M.S joist, M.S.Angle trusses of required span, purlines of required size as per drawing and design and placing in position including cost of nut &bolts and all other materials required for the work, cost of all labour, T&P etc.complete as per specification & direction of EIC. (Make: Jindal / Tata) |
| 30 | Painting two coats with approved brand of synthetic enamel paint of approved shade and quality over a coat of approved primer to iron works including cost of paint, primer, putty, scaffolding, T&P, cost, conveyance, cost of all materials and cost of all labour required for the work etc. complete as per the direction of EIC. (Paints of Burger/Nerolac/J&N /Asian/ ICI Brand is to be used.) |
| 31 | Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing & including cost of all materials, labour, T&P, royalty etc complete in all respect and as per direction of the Engineer-in-charge |
| 32 | Electrical works |
| 33 | Surface wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 6/10 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on PVC board having front cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex / L&T / Anchor / Havels / V Guard)(Avg length 5 Mtr). |
| 34 | Surface wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/ Polycab/ Anchor/ Havells) |
| 35 | Supplying and fixing of 10 Modular PVC Board on surface with suitable size of modular base and cover plate in front including providing and fixing 3X 3 pin 6/10 amps socket outlet and 6/10 amps modular type switch, connection, etc as required, including labour charges, all material & accessories as per direction of EIC(Legrand,Havells,Roma). |
| 36 | Supplying and fixing of 4 Modular PVC Board on surface with suitable size of modular base and cover plate in front including providing and fixing 1X 5 pin 16 amps socket outlet and 16 amps modular type switch, connection, etc as required, including labour charges, all material & accessories as per direction of EIC. |
| 37 | SITC of Linear Hanging lights for Hanging lamps(Half round made up of Metal,black golden colour), downward facing, consists of mounting base,E27 Holder with wire(100 cm),metallic shade, with one No of 80 Watt LED(White,with inbuilt surge protection of 4kv), etc complete the work in all respect as per direction of EIC. |
| 38 | Supply and fixing of 20Watt,LED tube light including all accessories ,materials as required as per the direction of EIC(Make-Havells,Crompton,Phillips). |
| 39 | Supply and fixing of 240 V,Step type Electronic Regulator,including all accessories ,materials as required as per the direction of EIC(Make-Havells,Crompton,Phillips). |
| 40 | SITC of 250 mm Exhaust fan,including all accessories ,materials as required as per the direction of EIC(Make-Havells,Crompton,Phillips). |
| 41 | Supply and fixing of 8- way three pole and neutral, sheet steel, MCB distribution Board, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ,with 32 Amp FP MCB-01 Nos,20Amp SP MCB-01 Nos,10 Amp SP MCB-03 Nos.complete the work in all respect as per direction of EIC(Make-Havells,Legrand,L&K). |
| 42 | Supply & Drawl of 3.5Cx120 sq mm ,1.1 KV XLPE Aluminium Armoured(Round type) cable ,( Make-POLYCAB, KEC International,HAVELLS) with earth excavation and backfilling, min 750mm depth,cable route marking & all other accessories as per the direction of EIC. |
| 43 | Supply & Drawl of 3.5Cx70 sq mm ,1.1 KV XLPE Aluminium Armoured(Round type) cable ,( Make-POLYCAB, KEC International,HAVELLS) with earth excavation and backfilling, min 750mm depth,cable route marking & all other accessories as per the direction of EIC. |
| 44 | Supply & Drawl of 4Cx 16 sq mm ,1.1 KV XLPE Aluminium Armoured(Round type) cable ,( Make-POLYCAB, KEC International,HAVELLS)with earth excavation and backfilling, min 750mm depth,cable route marking & all other accessories as per the direction of EIC. |
| 45 | Supply and making End termination with Double compression gland and Aluminium lugs for PVC Insulated and PVC sheathed/XLPE aluminium cable of 120 sq mm, 1.1 KV as required ,etc complete the work in all respect as per the direction of EIC(Make-Comet,Dowells,Braco). |
| 46 | Supply and making End termination with Double compression gland and Aluminium lugs for PVC Insulated and PVC sheathed/XLPE aluminium cable of 70 sq mm, 1.1 KV as required ,etc complete the work in all respect as per the direction of EIC. |
| 47 | Supply and making End termination with Double compression gland and Aluminium lugs for PVC Insulated and PVC sheathed/XLPE aluminium cable of 16 sq mm, 1.1 KV as required ,etc complete the work in all respect as per the direction of EIC(Make-Comet,Dowells,Braco). |
| 48 | Installation,Testing & Commissioning of 200 Amp Feeder Pillar, mounting over Ms channel frame and fixing the panel with all accessories , Tools tackles including labour charges as per direction of EIC. |
| 49 | Supply and fixing of GI Electrode Earthing of 3Mtr Length (2900 mm pipe+ 100 mm terminal),having Outer Dia 48mm(hollow) & thickness of 3.2mm,with at least crossectional area(cylindrical shape) of 4.53 sq mm & having weight of 10.6 kg, the Electrode shall be hot dip galvanized with 150 micron over all surfaces in accordance with IS:4736/1986 , including earth excavation work, the secondary earthing with Salt &charcoal in complete with inspection chamber (size 2'x2' ) & CI cover , nomenclature as per technical specification and instruction of Engineer in Charge(The code of practice of Earthing will be as per IS:3043/1987). |
| 50 | Supply, Installation & comissioning of 25X6 mm GI flat including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
| 51 | Supply & Fixing of Copper spike Lightning arrester of 9 mm dia and 912 mm long (solid),including all other accessories, material,labour charges as per the direction of EIC. |
| 52 | Supply and fixing of 90 Watt,LED street light(120 lum/w) including all fitting accessories(GI bend pipe,clamp,etc) , 10KV inbuilt SPD, materials as required as per the direction of EIC. Please Enable Macros to View BoQ information |
