Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. Normal concrete 1:4:8 or richer mix (i/c equivalent design mix) DSR 15.2.2. |
| 2 | Dismantling of doors, M.S window and clerestory window (steel/wood) shutter including chowkhats architrave,holdfast etc. complete and stacking within 50 metre lead (DSR 15.12.1) |
| 3 | Credit of doors, windows and clerestory windows (steel or wood) shutter excluding chowkhats, architrave etc complete in all respect and to the entire satisfaction of the Engineer-in-charge. |
| 4 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material anddisposal of unserviceable material within 50 metres lead. (DSR 15.25) |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. DSR 15.23.1 |
| 6 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.(DSR: 14.82) |
| 7 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead (DSR: 15.52) |
| 8 | Removing of cinder from depressed part of toilets at all floors complete in all respect to the entire satisfaction of Engineer-in-Charge |
| 9 | Providing and Laying of cinder concrete with cement 1:15 (1 Cement : 15 Cinder) in sunken portion of toilets etc. Complete in all respects. |
| 10 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 2.27 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 2.27 kg/ sqm).(DSR:22.3) |
| 11 | Dismantling old plaster or skirting raking out joints. (DSR 15.56) |
| 12 | Earthwork in excavation by mechanical means (Hydraulic excavator)/ manual means over areas ( exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m, and excluding disposed earth to be levelled and neatly dressed. All kinds of soil complete in all respect to the entire satisfaction of the Engineer-In-Charge. (DSR 2.6.1-2.36) |
| 13 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge rate also includes credit of servicable bricks / Bats. In Cement mortar Based on DSR 15.7.4 |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) (DSR : 4.1.10) |
| 15 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) Coarse sand. Cement mortar 1:4 (1 cement : 4 coarse sand). (DSR : 6.1.1) |
| 16 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).DSR 4.10 |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (1 cement : 4 coarse sand). (DSR : 6.4.1) |
| 18 | 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) complete in all respect to the entire satisfaction of the Engineer in charge.(DSR 13.1.1) |
| 19 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) (DSR 13.5.1) |
| 20 | Centring and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ) DSR 5.9.4 |
| 21 | Providing and fixing 18mm thick gang saw cut mirror polished machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Granite of any colour and shade,Area of slab over 0.50 sqm.(DSR : 8.2.2.2) |
| 22 | Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work. DSR 8.3.2 |
| 23 | Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. (DSR 8.5) |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers DSR 5.9.5 |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.DSR 5.9.6 |
| 26 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge for the following grades of concrete.All works above plinth level upto floor V level.Concrete of M25 grade with minimum cement content of 330 kg/cum.DSR 5.33.2.1 Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. |
| 27 | Add for using extra cement in the items of design mix over and above the specified cement content therein. DSR 5.35 |
| 28 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR 5.22A.6 |
| 29 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick. DSR 11.26.1 |
| 30 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes DSR 10.16.1 |
| 31 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works(DSR 10.25.2) |
| 32 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required(DSR:12.50) |
| 33 | Providing and fixing PPGI ridge ridges and hips in puff sheet / GI Sheet roofing of minimum size 300 X 300 mm and minimum thickness of 1.0mm with suitable fixing accessories or self drilling fastener etc. complete in all respect . |
| 34 | Providing and fixing 1st quality ceramic glazed wall tile confirming to IS: 15622 (thickness to be specified by the manufacture of approved make Kajaria/ johnson/ Somany / Cera in all colours shade except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (: 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including painting in white cement mixed with pigment of matching shade complete in all respect to the entire satisfaction of the Engineer-In-Charge.of size (600x1200) DSR 8.31 |
| 35 | Providing and laying Double charged vitrified floor tiles (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make Kajaria /johnson / Somany / Cera in all colours , shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4(1 Cement: 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete of size (800x1200) .(DSR:11.38) |
| 36 | Providing & Fixng High Density Chequerred precast cement concrete tiles 25 mm thick of approved design & colour jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 37 | WOODEN GROOVED ACOUSTICAL SLATS:- Providing and fixing wood Based panels with lineal perforations of approved make as approved by Engineeer-in-Charge. The panels shall be Non FR grade with melamine laminate panels 2440mm x 128mm x18mm with 2mm slats at 15 mm pitch, Toungue and Groove edges for seamless mounting. The back of the panels fixed wtih acoustical fleece for Sound Absorption. Panel is to be fixed on Dexune framework with screw fixed horizontal or vertical to wall at every 600mm with centre & edge bracket in tongue & groove system on framework. The cavity of framework should be inserted with rock wool with 48 kg density and 50mm thickness and along with all accessories complete in all respect and to the entire satisfaction of Engineer in charge. |
| 38 | Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately):(DSR : 12.31.1) |
| 39 | Extra cost for Providing cobe in gypsum as per approved design and drawing by providing aluminium sections complete in all respect to the entire satisfaction of Engineer-in-Charge. N.S |
| 40 | Providing and fixing of GI OREO Metal suspended ceiling system of approved make DEXUNE/HUNTERDOUGLAS/ANUTONE having OREO or equal GI Lay in Perforated with fleece 600x600x0.5mm (TEGULAR) EDGE TILES in global white colour to be laid on Regular 24mm wide T-section flanges colour white having rotary stitching on the Main Runner with web height of 38mm, 1200mm & 600mm Cross Tees with web height of 26mm. The tiles should have Humidity Resistance (RH) of 100% with Light Reflecgtion of 62% with Rockwool backing 50mm and 48kg density to achieve NRC 0.9 shall have to comprise main runner spaces at 1200mm centres securely fixed to the structural soffit at 1200mm maximum centre. The first & last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200x600mm module. Cut cross tees longer than 600mm require independent support. 600x600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at 450mm maximum centres and suspended with accessories supplied by Hilti consisting of HLC Sleeve Achor Fasteners of thread size 6.5mmx25/5 with Soffit Cleat made of Galvanised steel of size 27x37x25x1.6mm and Level Clip in dimensions of 85x30x0.8mm with 4.00 mm G.I.wire complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 41 | Providing and fixing of lay-grid false ceiling consisting of ceilling tiles Armstrong Woodworks SL2 edge Suspended Ceiling System with ARMSTRONG 24 MM GRID or equivalent as per approved sample of tiles with visual pattern R3 perforation with approved laminate (US Maple, Royal Cherry, Dark Walnut, Maple) / Wood Veneer (Maple, Dark Bamboo, Red beech, US Cherry) finish would have an NRC of 0.5, Humidity Resistance (RH) of 90%, Fire Performance Class 1(BS - 476) in module size of 600mm x 600mm x 12mm and density of 830 Kgs/M3 lay-in-modular grid/ suspension system ( hot dipped galvanized steel) of standard T-Section having its flanges face powder coaed colour white suspended from ceiling and secured with clips and G.I. etc with following details. (a) Main runners shall be T-Shaped section with single rotary stitching of size 24mm x 36 mm and 3600mm long. (b) Cross runners shall be T-Shaped double rotary stitching of size 24mm x 26mm and 1200mm long.Cross runner T-Section of 24mm x 26mm and 600mm long. The frame work comprises of main gunners spaced at 1200mm centre to centre shall be securely fixes to the structural soffits by approved hangers at 1200mm maximum centres. The hangers (G.I. wire of 4mm dia) to be fixed by means of roof plug, level adjuster and screws etc. Flush fittiing 1200mm long cross tees (with double stitching) to be interlocked between main runners at 600mm centre ti firn 1200 x 600mm modules. Cut cross tees longer that 600mm to be supported independently to form 600x600mm modules. The complete work shall include the cost of all material and labour and lead and fit complete and to the entire satisfaction of Engineer-in-Charge. 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) DSR 12.45.1 |
| 42 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, Stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary Stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm).(DSR : 9.147A.5) |
| 43 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary Stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). (DSR : 9.147C.1) |
| 44 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket,Non staining water resistant Clear silicon filling in gap perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. (DSR : 21.10) |
| 45 | Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only DSR 9.22.1) |
| 46 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). DSR 9.23 |
| 47 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand) : Raised and cut pointing DSR 13.31.2 |
| 48 | Removing dry or oil bound distemper water proffing cement paint and the like by scrapping sand parering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR 13.91) |
| 49 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (DSR 13.26) |
| 50 | Distempring with oil bound washable distemper of approved brand and manufacture to give even shade Old work (one or more coats) (DSR 13.90.1) |
| 51 | Finishing walls with acrylic Smooth exterior paint of required shade: - New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm.(DSR : 13.46.1) |
| 52 | Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface DSR 13.111.1 |
| 53 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. DSR 13.45.1 |
| 54 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR 13.62.1 |
| 55 | Re Grading/Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 56 | Renewing glass panes, with wooden fillets wherever necessary:- Float glass panes of thickness 4 mm (DSR 14.5.1) |
| 57 | Providing and spraying high gloss P U paint two coats with gun sprayer & pressure pump arrangements on Gate/G.I pipe/Jaffery to give glossy finish after complete scraping with grinder, sand paper etc. to make surface smooth complete in all respect to the satisfaction of Engineer-in-Charge. N.S |
| 58 | Providing & fixing frosted glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 5.0 mm thick Frosted glass panes . N.S |
| 59 | ACCOUSTIC DOORS:- Providing and fixing of accoustic double panneled doors with splayed/recessed joint in center for entry by providing 12mm thick commercial ply on outer side and 9mm thick commercial ply on inner side fixed on wooden frame of 2nd class hard wood battens of size 1½”x2\\" having grid @ 2'-0\\"c/c on both sides duly filled with 50mm thick rock wool with 48 kg density completely packed and fixing of 3mm thick teak veneering with groove is to be fixed on inner side and 1mm thick laminated decorative sheet on exposed sides with approved adhesive. The door shall have 2no's shutter on each side with folding arrangements and properly eccentrically tied with existing chowkhat during opening. The accoustical door shall be properly fixed with existing chowkhat with the help of 4no's SS hinges of size 5\\" on both shutters and also hinges in center with sound sealing arrangements. The door shall have 2'-0\\" size SS round handles and 2'-0\\" long SS tower bolts complete fixed with help of nails, The door shall also includes the cost of PU polish including cost of filler and all hardware material of Stainless steel i.e. locking arrangement, sliding bolts, tower bolts and handles complete in all respect to the entire satisfaction of Engineer-in charge. |
| 60 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the caffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially,.(DSR : 14.72) |
| 61 | Providing and fixing of accoustic film 1.5mm thick in sandwiched between existing toughened glass to avoid the impact of sound outside of hall complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 62 | Providing and filling in joints of existing floor tiles with epoxy grout in average width 3mm wide and average thickness 8mm to 10mm complete in all respect to the entire satisfaction of Engineer-in-Charge. N.S |
| 63 | P/F mirror of superior glass (of approved quality) and of required shape and size fixed in position by means of 4 no. chromium plated brass srews & washers including cost of wooden/ fibre beading all around complete in all respect as per the entire satisfaction of EIC. |
| 64 | Removing existing 6mm polycarbonate sheet along with aluminium profile with the help of tapping screws to the existing frame and disposed off the removing old damaged polycarbonate sheet complete in all respects to the entire satisfaction of Engineer-in-charge. (N.S) |
| 65 | Providing and fixing in tiles in murals cut out and assembled in specially handcrfted and coloured pattern with caramic Fired/Glazed tiles (5mm to 7mm thickness) of various size and other colourful ceramic tiles (4mm to 6mm thickness) in vanous colours and shapes & size as per as approved pattern & design to be fixed with cement mortar 1:3 (1 cement : 3 sand ) & jointing with tile adhasive including pointing with tile grout/pigment of matching shades at all heights complete in all respect to be entire satisfaction of engineer-in-charge. (N.S) |
| 66 | Providing & fixing capitel letters15 nos of word COMMUNITY CENTER made shall be of Stainless steel, stain finish having size of words letter 1'-6\\" each and made shall the help of SS lugs having fixing arrangments with help of rawi plugs and letters fixed on the back wall complete in all respect to the entire satisfaction of Engineer-In-Charge. |
| 67 | Providing & Installing LOGO IN ACRYLIC GLOW 1\\" EXTRUDED complete as per submitted drawings and complete satisfaction of Engineer-in-charge. (N.S) |
| 68 | Credit of old steel recovered from site complete in all respect and to the entire satisfaction of the Engineer-in-charge. (N.S) |
| 69 | Credit of old precoated galvanised iron profile sheets recovered from site complete in all respect and to the entire satisfaction of the Engineer-in-charge. (N.S) |
| 70 | Providing and fixing 75-100mm dia PVC pipe of heavy duty including cost of sockets required length complete in all respect and to the entire satisfaction of the Engineer-in-charge. |
| 71 | Providing and fixing of aluminium beading 12mm wide with gasket to maitain the gap between two toughened glasses and filled this gap with argon gas to keep the glasses separate and moisture free. Complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 72 | Providing and fixing door Premium SS round handles have 0'-8\\" size , Door handle with key and lock arrangement combined and 1'-0\\" & 1'-6\\" long SS tower bolts complete fixed with help of nails locking arrangement, Heavy duty Door Closer and Magnetic Door Stopper of make Godrej/ Milton / Harrison /Blue space complete in all respect to the entire satsfaction of Engineer-in charge. |
| 73 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.DSR 12.44 |
| 74 | Providing and fixing to the inlet mouth of water pipe Stainless steel grating drain 10-15 cm diameter in round or square shape and with/ without round cut complete in all respect to the entire satsfaction of Engineer-in charge. |
| 75 | Providing and fixing 150mm dia rain water pipe bend of cast (spun) iron of make NIC/NIF/BIC complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 76 | Providing and fixing 150mm dia rain water pipes of cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 fixed with the help of M.S. holder bat clamps of approved design for C.I. or S.C.I. with screws & gutties in existing brickwall, RCC column,walls etc including filling of joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) complete in all respects to the entire satisfaction of Engineer-in-Charge. |
| 77 | Artistic Painting on existing wall after preparing/smoothning the existing surface Complete in all respect to the entire satisfaction of the Engineer-in-Charge. |
| 78 | Providing & fixing Cubical Partition of 19mm HDHMR Laminated Board having foot rest made of Stainless steel, locking handle with showing engage/vacant and made shall the help of SS lugs having fixing arrangments with help of rawl plugs complete in all respect to the entire satisfaction of Engineer-In-Charge. |
| 79 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) DSR 16.53 |
| 80 | Providing and fixing Barbed wire 12 X 12 ply hot dipped confirming to IS 278-1978 type B and Designation (wt 125gm/Rmt) on Existing angle complete in all respect to the entire satisfaction of the engineer in charge. N.S |
| 81 | Providing and fixing Cupboard of 24\\" deep and 7'2\\" height with openable shutter consisting of 19mm thick commercial board (ISI) marked) make lipped with teak wood lipping/Tape of 19x6mm on exposed edges includes cost of Hydraulic hinges and handle, nail, screws, synthetic adhesive etc. the front sutter and sides laminated 1mm with laminated of approved shade and fixed in position with help wooden gutties complete in all respect to the entire satisfaction of the E.I.C. |
| 82 | Dismantling and disposal of 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles for all heights,including credit of old material recovered from site complete in all respect to the entire satisfaction of Engineer-In-Charge. |
| 83 | Providing and fixing vinyl or Polyster Textile wallpaper coverings with approved adhesive on existing plastered surface finished with putty after removing the existing old one , to give bubble free uniform surface. Any unevenness of the base surface shall be removed before fixing the wallcovering, all complete as per direction of Engineer-in-charge. (N.S) |
| 84 | Providing and fixing Stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary Stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & Stainless steel dash fasteners , Stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of Stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) DSR 10.28 |
| 85 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.(DSR 15.60) |
| 86 | Zebra Blinds: Providing and fixing zebra blinds of approved make (Win Tree, Vista), shade and colour as approverd by Engineer in Charge. The blinds shall be alternate opaque and translucent mesh venetien blinds including fittings for exceptional lght control operational by spring loaded resin. Mounted aluminum rail of detachable fascia. Both side beautifully covered by pvc or resin part fixed in aluminium rail. Cap should be used to cover screw used for fixing clutch. Mounting brackets must have cushioning to reduce noise during operation. Mounting brackets must have provision of wall as well as ceiling installation. This bidirectional blind shall be operational by assitance of polyester cord. This polyester cord should be molded inside pvc beads of 4.5mm outer dia. Mounting part made up of MS zinc coated of minimum thickness of 2mm molded in pvc. Ilder pin made of zinc plated MS of 9mm outer dia surrounded by bearing balls to support blinds at other end. This bidirectional blind shall be operational by assistance of polyester cord. This polyester cord should be molded inside pvc beads of 4.5mm outer dia. The Idler mounting part made up of zinc coated MS of thickness of 2mm molded in PVC. The blinds shall be operational without any hindrace. (As per approved sample to the entire satisfaction of Engineer-in-Charge) |
| 87 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 21.1.1.2 |
| 88 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15 Powder coated aluminium (minimum thickness of powder coating 50 micron) 21.1.2.2 |
| 89 | Providing and fixing glazing in aluminium door, window, ventilator shutter and partitions etc. with PVC/necprene gasket etc. complete as per the architectural drawing and the direction of Engineer-In-Charge (cost of aluminium snap beading shall be paid in basic item) with flot glass panes of 5.50mm thickness) drawing and the direction of Engineer-In-Charge (cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5.50 mm thickness DSR 21.3.2 |
| 90 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod. Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.1. 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks) DSR 9.105.1. |
| 91 | Electrical Work |
| 92 | P/F of LED luminarie of size 2'x2' of 30-36 watt (595x595 mm) surface/ recess type including driver with system Lumens 3600-4000 Im having efficacy of minimum 100 lm/W. THD <10%, PF > 0.95, Having coloured temperature 4000-6500 K recess type suitable to be fixed in Armstrong/ grid ceiling. The fitting should provides soft light and glare free symmetrical illumination and is to be fixed in the existing false ceiling frame of make Havells/ Wipro/ Twinkle/ Surya/ Phillips/ Bajaj alongwith connection, testing and commissioning erc. This job also includes all petty material required to be entire satisfaction of Engineer-in-charge. Warranty:- The fixture should be comprehensively warranted to be repaired or replaced for any defect within 2 years of installations. |
| 93 | Supply & Erection of 1x18 watt retrofit LED tube with channel/batten Supply & Erection of 1x18 watt retrofit LED tube channel/batten made of aluminium housing with PC diffuser Lumen out put should be more than 100 lumens per watt (1800 LUM) with LM 79 report from NABL. The make of the fittings should be Phillips/Osram/ Havells/Surya//wipro/Twinkle. The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 94 | S / E of ceiling fans complete with aluminium blades, plastic canopies 2 Nos. double bal bearing, MS hanging rods, condenser, reels, clamps etc. The body of fan and blades should be white in colour. The job includes the cost of making necessary connections from the adjacent light point with 1.5sq.mm single core copper conductor cable & extra down rod length upto 3ft. The sample of fans shall be gotapproved from the Engineer-in-charge of work before installation at site. The job also includes the cost of carriage, erection, testing, commissioning of fan, all labour and petty material required to complete the job to the entire satisfaction of the Engineer-in-Charge. [Size56\\" 1400mm sweep ceiling fan of Havells make Velocity White / Orient make Summer Breeze Crompton make Cool Breeze / Usha make Apollo Bajaj make Sabse. Tez only |
| 95 | Supply and Erection of Exhaust fan with louver (heavy duty motor with copper winding & metallic body) of following size complete with motor, mettalic blades, double ball bearing with minimum power consumption, rigid frame with rubber mounting for silent operation,epoxy powder coating along with mettalic louver to be installed in the opening to be made by cutting the MS Jalli of required size. Price includes the cost of cutting the MS jalli, making holes to suit the size of louver and exhaust fan, carriage charges, connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of EIC. Size 12\\" Sweep 900 RPM with louver of Havells make Turbo Force SP/ Orient make Industrial heavy duty / Crompton make HDEF EXHD 300- 6-1 / Bajaj make Supreme DLX only. |
| 96 | S/I/T/C OF 9-12 Watt LED Downlighter, made of extruded plastic housing and high power LED as alight source wih clear diffuser and incluting electronic driver with minimum 100 Lumens/watt, THD <10%, Pf > 0.95, protection IP 20, and CCT 4000-5700K, Surge protection 4kV, Operating Voltage Range - 150V – 270Volts.MAKE- philips ,bajaj/ Wipro,Trilux,Osram,Havells, JAGUAR complete in all respect.Warranty:- The fixture should be comprehensively warranted to be repaired or replaced for any defect within 2 years of installations. The work shall be executed to the entire satisfaction of Engineer-in-charge |
| 97 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Make : Legrand, Northwest Wipro, Schneider, Havells, ABB |
| 98 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make :Legrand, Schneider, Havells, ABB & L&T/goldmedal.5/6Amp switch |
| 99 | 3 Pin 5/6Amp socket outlet |
| 100 | 15/16 Amp switch |
| 101 | 6 Pin 15/16Amp socket outlet |
| 102 | SUPPLY & ERECTION OF 3 MM BAKELITE SHEET. |
| 103 | Supplying and fixing suitable size GI box with modular plate & socket in front on surface or recess, including providing and fixing 3 pin 5/6amp modular socket outlet and 5/6amp switch, connections etc. as required. Make : Legrand, Northwest Wipro, Schneider, Havells, ABB/goldmedal. |
| 104 | Supplying and fixing suitable size GI box with modular plate & socket in front on surface or recess, including providing and fixing 6 pin 5/6 & 15/16amp modular socket outlet and 15/16amp switch, connections etc. as required.Make : Legrand, Schneider, Havells, ABB & L&T/Goldmedal. |
| 105 | Supplying and fixing following way, horizontal type three pole and neutral, sheet stee, MCB Distribution Board, 415Volts, on recess, complete with tinned copper bus-bar, neutral bus-bar, earth bus-bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) of Make : Legrand/ Seimens/ Schneider/ L&T/ABB/Havells. 4 Way (4 + 12), Double Door |
| 106 | MODULAR GI BOXESSupplying and fixing following sizes / modules, GI box along with Modular base & cover plate for modular switches in recess etc as required. Legrand, Schneider, Havells, ABB & L&T/Goldmedal.2 Module (75 mm x 75 mm) |
| 107 | 3 Module (100mm x75 mm) |
| 108 | 6 Module (200mm x 75mm) |
| 109 | 8 Module (125mm x125mm) |
| 110 | 12 Module (200 x150mm) |
| 111 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable and 1.5 sq. mm FRLS PVC insulated copper conductor single core cable IS standards of make Finolex/ Polycab/KEI/ Havells/ Cirtina as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required. Group C. |
| 112 | Wiring for light point/ fan point/ exhaust fan point with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable in recessed heavy duty PVC conduit ISI marked with modular switch, modular plate, blanking plate if required, suitable size GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable Iincluding GI Box, Concealed Light Box, Modular switch socket & 5/6A Switch single pole etc complete as required. Make: Legrand, Northwest Wipro, Schneider, Havells, ABB,Goldmedal .Group - C Cable: Finolex/Polycab/Havells/KEI. |
| 113 | Wiring for group controlled light point/ fan point/ exhaust fan point (without independent switch etc.) with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable in recessed medium class PVC conduit and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc. complete as required.Make: Finolex/Polycab/Havells/KEIGroup - C |
| 114 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. Make: Finolex/Polycab/Havells/KEIGroup - C3x 1.5 sq. mm |
| 115 | 3 x 2.5 sq. mm |
| 116 | 3X4 sq mm |
| 117 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. ISI marked25mm |
| 118 | Supply and laying of insulated 2 core x 10mm2 aluminium multi conductor twin core flat unarmoured cable to fixed on the suitable clamps and nuts /bolts etc make finolex/ lapp/ cirtina/polycab/ havell's. The work shall be executed to the entire satisfaction of engineer-in-charge. |
| 119 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connection etc. as required. |
| 120 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole Make: HavellS/ Standard/Schneider/ ABB/L&T. |
| 121 | Supply and fixing of three phase MCB TPN 63 Amp complete to the entire satisfaction of engineer-in-charge. The MCB TPN is to be fixed inside the existing Distribution Box. Make: HavellS/ Standard/ Schneider/ABB/L&T. |
| 122 | Supply & laying PVC insulated Aluminum Conductor armoured ISI Marked cable of 3.5 Core 70 mm sq in Trench/ Pipe. Supply & laying PVC insulated Aluminum Conductor armoured ISI Marked cable of size 3.5 Core 70 mm sq of make Havells/ Finolex/ Polycab/ Critina/ Ecko/ Lapp conforming IS:1554 (Pt.1) amended upto date.The cable to be laid in trench/ pipe as per DSR Code 1.21 MV CB PIP-25 Part-II (External). The job included all Connections, Commissioning and testing of phase Supply complete in all respective to the entire satisfaction of the Engineer in charge. |
| 123 | Supply & laying PVC insulated Aluminum Conductor armoured ISI Marked cable of 3.5 Core 185 mm sq in Trench/ Pipe. Supply & laying PVC insulated Aluminum Conductor armoured ISI Marked cable of size 3.5 Core 185 mm sq of make Havells/ Finolex/ Polycab/ Critina/ Ecko/ Lapp conforming IS:1554 (Pt.1) amended upto date.The cable to be laid in trench/ pipe as per DSR Code 1.21 MV CB PIP-25 Part-II (External). The job included all Connections, Commissioning and testing of phase Supply complete in all respective to the entire satisfaction of the Engineer in charge. |
| 124 | Supply & Erection of DWC pipe 90/76mm with hand bockey:-Supply and laying of 90/76 mm (I/D& O/D) Double Wall Corrugated (DWC) High Density Polyethylene pipe (HDPE Density 240 to 958 KG/Cm3) having corrugation on the outer wall and plain surface inner wall with average wall thickness for outer layer as 1.1+0.1mm and for inside layer 1.2+0.1mm maintenance free, ‘C’ value over 150 with lowest frictional losses, anti rodent, inflammable & good weathering resistance, conforming to IS 14930 (P-II) and PSEN-50086 (P-I & II) of Make Gemini/Mohindra eco/Supreme/RexDuraline. The pipe should be laid 3 feet below ground/road level with hand bockey without cutting of road for laying cables etc. including cost of digging and refilling of pits complete in all respects to the entire satisfaction of Engineer-in-Charge.DSR CODE 14.15.2 |
| 125 | Supply & Laying of DWC pipe 90/76mm with out hand bockey:-Supply and laying of 90/76 mm (I/D& O/D) Double Wall Corrugated (DWC) High Density Polyethylene pipe (HDPE Density 240 to 958 KG/Cm3) having corrugation on the outer wall and plain surface inner wall with average wall thickness for outer layer as 1.1+0.1mm and for inside layer 1.2+0.1mm conforming to IS 14930 (P-II) and PSEN-50086 (P-I & II) of Make Gemini/Mohindra eco/Supreme/Rex/Duraline. The pipe should be laid 3 feet below ground/road level by digging the ground upto 3 feet or cutting the road/paver blocks upto required level & laying of DWC pipe for laying L.T. (up to 1.1 KV grade) cables etc. including cost of digging and refilling of pits/Trench complete in all respects to the entire satisfaction of Engineer-in-Charge of work. |
| 126 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required • (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door complete to the entire satisfaction of Engineer-In-Charge. Make HavellS/ Standard/ ABB/L&T/Schneider. |
| 127 | S/E three phase MCB TP 63 Amp in existing BDB Make HavellS/ Standard/ ABB/L&T/Schneider. |
| 128 | Providing and fixing 400 A 3 pole 35-36 KA rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing enclosure /existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. Make HavellS/ Standard/ ABB/L&T/Schneider. |
| 129 | Providing and fixing 160 A 4 pole 16 KA rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing enclosure /existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.Make HavellS/ Standard/ ABB/L&T/Schneider. |
| 130 | Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Make HavellS/ Standard/ ABB/L&T/Schneider. |
| 131 | Providing & installing cassette type AC of 4.0 ton cooling capacity 48000 BTU per hours+10% variation with scroll/rotary compressor operation on refrigent R-410/R32/or its equivalent, powe supply 380-440 Volt 3 phase, cordless remote control 370 watt + 10% variation complete installing as per manufacturer design and as per directions of EIC. The Air Conditioners should be 3 star, 100% copper coil and should be designed on 48 degree/ centigrade AMBIENT temp.The work should also include fixing of outdoor unit connected wth the indoor system of make: Make: Carrieer/Voltas/Hitachi/Daikin/Mitsubishi with warranty of 3 years. |
| 132 | Supplying, installation, Testing and Commissioning of Split Type AC 2.0 Ton, 3 Star Rating. The AC shall be Suitable for 230 +/- 10% volts, 50 Hz Ac supply. The AC EER not less than 3.55 supply with Copper condenser. 2.0 Ton Capacity of nominal cooling capacity 6000 kilo calories/Hr./24000 BTU/Hr. with permissible variation of +/- 10%. Room discharge air flow 650 cfm indoor Nosie level not exceed 50 db. Refringent 410 A/R32 or its equivalent and complete to the entire satisfaction of Engineer-in-charge. Make: Carrieer/Voltas/ Hitachi/ Daikin/ Mitsubishi with warranty of 3 years. |
| 133 | Supplying and fixing voltage stabilizer 5 KVA for AC of 2 Tn and above with MCB, TDR volt meter copper winding input range 180-250 volt single phase including cost of copper wire from stabilizer to A.C unit with M.S body of 22 gauge sheet powder coated). Cost includes 15A plug top. Make DEOL/ jewel/V-guard/microtek. with warranty of 3 years. |
| 134 | Providing and fixing of 28 gauge copper piping between indoor & outdoor unit complete with sleeve type Kini insulation including the cost of chasing of brick wall, RCC & repairing the same in good conditions as per site requirement to the size & design of manufacture.size of copper pipe 5/8\\"x3/8\\". |
| 135 | Providing & Fixing PVC rigid drain pipe 20mm (3/4\\") dia of Diplast/ finolex/supreme make of complete in all respects from indoor unit to disposal points as directed by EIC. |
| 136 | Providing and fiixing flexible copper conductor wires complete in all respects. Make Finolex/Havells/BCH/KEI/Polycab3 core 2.5 mm. |
| 137 | Supply and erection of 4sqmmX5 core PVC round sheathed multicore copper heavy duty industrial flexible wire with connections, testing and commissioning etc. as required complete in all respect. The specifications complete in all respect and to the entire satisfaction of Engineer-in-Charge. Make: Polycab/RR Kabel/Havells/ Swadeshi or any equivalent ISI. |
| 138 | Supply and Erection of double door type LT panle board of suitable size ,duct and vermin proof ,fabricated out of 1.6 mm thickCRCA sheet steel ,powder coated with 7 tank process for better environmental protection .MCCB Panel board should be manufactured and supplied by ISO-())1 certified OEM of MCCB. The bus bar sysytem should be duly type tested at NABL accrediated lab for short time to withstand current of 1 second .The panel board should be suitable for floor or wall mounting and should be robust construction. The panel board should have cable alleys on both sides for easy cable termination and should be compleet with Ammeter,Voltmeter ,Selector switches ,Fuses ,Indicating Almps etc. MAke :Havells CAT No. IHVGF4000800 OR ITS EQUIVALENT in ABB/Schneider/.The panel should comprises of the following items : DescriptionA. Basic Module -01 No.B. Cable Alley-01 No.C. Digital Meter Module-01 No.D. MCCB I/C 400 Amp 4 pole ,35 KA- 01 No.E. MCCB O/G 160A,4P,25 KA- 02 Nos.F. MCCB O/G 63A,4P,25 KA- 03 Nos.G. MCCB O/G 32-63A,SP,25 KA- 12 Nos. |
| 139 | Supply & Laying of Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick tape riveted to 25 mm X 5 mm· G.l. strip at 4.5 below the ground level including connection with G.l. nut, bolt, spring, washer excavation and refilling etc.with charcoal/ coke and salt as required and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 140 | Providing and fixing 25 mm X 5 mm G.l. strip on surface or in recess for connectionsetc. as required. |
| 141 | G.I. Earth pipe electrode with salt/ Charcoal: Supply and laying of earth electrode made out of ISI marked 'B' class G.I. pipe 4.5 Mtr. long 40 mm dia including accessories. GI pipe electrode shall be cut tapered at the bottom and provided with holes of 12mm dia, drilled not less than 7.5 cm from each other upto 2 Mtr. of length from bottom. The earth electode shall be laid in ground after boring as per CPWD specificationscomplete in all respect and to the entire satification of the engineer-in-charge. |
| 142 | P/F 6 SWG GI earth wire in pipe: Providing & laying earth connection from earth electrode with 6 SWG dia G.I. wire in 15 mm dia G.I. pipe from earth electrode, as required. The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 143 | Supply & Erection of high power120 Watt LED Flood Light luminaries:High-brightness White LEDs sources with high transmittance LENS on each LEDs, system lumen output of system luminous efficacy of 100 lm/W, 4000 K to 6000 K color temperature & CRI<70 value for ensuring good quality light output. Life of at least 50,000 hours & LED driver efficiency >95% Power factor greater than 0.90, THD<15% & min 6KV surge protection with operating voltage range from 120-270 V for ensuring lifelong high performance of luminaire, having in built protection against short circuit, over voltage protection, the fixture is made of LM-6 Pressure die-cast aluminum with engraved company name & have IK05 & IP66 Class I protection with NABL Accredited LM-79 & LM-80 Report. The fixture should be comprehensively warranted to be repaired or replaced for any defect within 5 years of installations. The luminary should not be over power derived. The fitting shall be mounted on the plate bracket on existing pole including making connection, testing & energizing complete in all respect to the entire satisfaction of Engineer-in-charge. The LED Street Light Fixture shall be installed on 7.5/9 mtr long pole. The luminary should be make Philips/ Crompton/ Havells/ Surya/bajaj/ Wipro/.The detailed specification for supply of LED Street light luminaries is as under (with 05 years warranty). 1. Thermal Management system Good Thermal Management system Management of LED should be provided and LED must be Mounted on heat sink conductive Aluminum with suitable large area Surface by means of fins to disciple Heat to ambient air.2. Applicable standar The fixture should confirm to Application BIS/IES standard/ IESNA LM 20 |
| 144 | PUBLIC HEALTH WORK |
| 145 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restsLadies |
| 146 | Gents |
| 147 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :Handicap |
| 148 | Ladies |
| 149 | Gents |
| 150 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tapsHandicap |
| 151 | Ladies |
| 152 | Gents |
| 153 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - chargeHandicap |
| 154 | Ladies |
| 155 | Gents |
| 156 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931Handicap |
| 157 | Ladies |
| 158 | Gents |
| 159 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm diaHandicap |
| 160 | Ladies |
| 161 | Gents |
| 162 | Kitchen |
| 163 | Providing and fixing of ball cock of 20 mm complete in all respect as per the entire satisfaction of Engineer in Charge Handicap |
| 164 | Ladies |
| 165 | Gents |
| 166 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.One urinal basin with 5 litre white P.V.C. automatic flushing cisternGents |
| 167 | Providing and fixing urinal partition 10mm thick High Stainless Steel of size 1.5 x 2.75 fixed in postion with clams holding the Steel Partition All exposed edges to be grinded with smooth finish to the entire satification of engineer-in-charge including carriage of material to site of work. to the entire satification of engineer-in-charge including carriage of material to site of work. [Fixed on slopping back wall before fixing ceramic tiles] (NSI) |
| 168 | Providing and fixing brass bib cock of approved quality 15 mm nominal boreHandicap |
| 169 | Ladies |
| 170 | Gents |
| 171 | Kitchen |
| 172 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore Handicap |
| 173 | Ladies |
| 174 | Gents |
| 175 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backingRectangular shape 453x357 mmHandicap |
| 176 | Ladies |
| 177 | Gents |
| 178 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms15 mm nominal boreLadies |
| 179 | Kitchen |
| 180 | Gents |
| 181 | Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 |
| 182 | Providing and fixing soil, waste and vent pipes : 75 mm diaSand cast iron S&S pipe as per IS: 1729 |
| 183 | Providing and fixing collar : 100 mm Sand cast iron S&S as per IS - 1729 |
| 184 | 75 mm diameter Sand cast iron S&S as per IS - 1729 |
| 185 | Providing Drip Seal Joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of dia 100mm |
| 186 | Providing and fixing plain bend of required degree100 mm dia Sand cast iron S&S as per IS - 1729 |
| 187 | 75 mm dia Sand cast iron S&S as per IS - 1729 |
| 188 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gmsHandicap |
| 189 | Ladies |
| 190 | Gents |
| 191 | Providing and fixing brass grating of approved quality and colour Circular type:100 mm nominal diaHandicap |
| 192 | Ladies |
| 193 | Gents |
| 194 | Kitchen |
| 195 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore |
| 196 | 20 mm dia nominal bore |
| 197 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.Internal work - Exposed on wall25 mm dia nominal bore |
| 198 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore |
| 199 | 20 mm nominal bore |
| 200 | 25 mm nominal bore |
| 201 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof |
| 202 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm outlet Sand Cast Iron S&S as per IS- 1729 |
| 203 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore |
| 204 | 32 mm nominal bore |
| 205 | Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 100 mm dia |
| 206 | 75 mm dia |
| 207 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 208 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard designInside dimensions 455x610 mm and 45 cm deep for single pipe lineWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 209 | Providing and fixing of CP extension of size 15 mm. Heavy Duty complete in all respect |
| 210 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 470x420 mm bowl depth 178 mm |
| 211 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms Providing and Fixing Toilet paper holder: C.P. Brass |
| 212 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. : Granite Stone of approved shade |
| 213 | Earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1:5 m in width or 10sqm or plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 100m. All kinds of soilFor Flooring, For Chamber, For 200mm SW pipe and For Grease Chamber |
| 214 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materialsFor Chamber and For Grease Chamber |
| 215 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete 200 mm diameter |
| 216 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design200 mm diameter |
| 217 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering – All work upto plinth level 1:5:10 (1cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size )For Flooring, For Chamber and For Grease Chamber |
| 218 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering – All work upto plinth level. 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) For Chamber, Benching and For Grease Chamber |
| 219 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand)For Chamber, For Grease Chamber, Inside Chamber baffle wall and Outside Flooring |
| 220 | 12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1cement: 4 fine sand)For Chamber, For Grease Chamber, Inside Chamber baffle wall and Outside Flooring |
| 221 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. Chamber Slab, Chamber side shuttering and Chamber Benching. |
| 222 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering , finishing and reinforcement with 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). For Flooring and For Chamber |
| 223 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placingin position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 224 | Providing and Fixing of precast RCC M-20 HD Road Gully cover and frames in 1:2 Cement Sand Mortar on the top of brick masonary chamber complete in all respects to the entire satisfaction of EIC.(Size of cover 690 x 537 x 80mm and of frame is 810 x 657 x 130mm). The work also includes removal/ dismantling of old frame and cover including minor repairs of the road gully if required. |
| 225 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 560 mm internal diameter |
| 226 | Making connection of drain or storm line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. completeFor pipes 100 to 250 mm diameter |
| 227 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 228 | Carriage of material by mechanical transport including loading, unloading and stacking Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
