Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of Sunken portion/EWC/IWC of any description and in any position not otherwise specially provided for complete all as specified and directed. |
| 2 | Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall/stone tiling including cement mortar bedding (but not backing), removing broken tiles and rubbish off the premises from site complete all as specified and directed. |
| 4 | Taking up or down existing 15mm bore steel water tubing and connections,including clreaning for refixing or removal, fixed/laid in any situation, complete all as specified and directed. |
| 5 | Taking up or down existing 20mm bore steel water tubing and connections,including clreaning for refixing or removal, fixed/laid in any situation, complete all as specified and directed. |
| 6 | M&L for Cleaning and removing all scale and dirt, etc., from tanks of capacity exceeding 250 Litres but not exceeding 500 litres, including writing letters as CLEANED ON Month and year by using synthetic enamel paint (height of each letter not less than 5 cm) as affected, complete all as specified and directed. |
| 7 | M&L for Cleaning and removing all scale and dirt, etc., from tanks of capacity exceeding 500 Litres but not exceeding 1000 litres, including writing letters as CLEANED ON Month and year by using synthetic enamel paint (height of each letter not less than 5 cm) as affected, complete all as specified and directed. |
| 8 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 9 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 10 | Taking down cement plaster of any description on brick walls or concrete or stone and ceilings including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 11 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts, and removing from site complete all as specified and directed. |
| 12 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size exceeding 1.5 Sqm but not exceeding 4 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts, and removing from site complete all as specified and directed. |
| 13 | Taking down dhutters of any description exceeding 1.00Sqm but not exceeding 2.00Sqm each and refixing in same opening and in same position complete all as specified and directed. |
| 14 | Dismantling boarding, any description, fixed in any postion with nails or screws complete all as specified and directed. |
| 15 | Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, complete all as specified and directed. |
| 16 | Cutting holes in brick walls exceeding one brick but not exceeding half brick, built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) Type B-1 as required complete all as specified and directed. Note:- Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall. |
| 17 | M&L for Lean Cement Concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete and filling in Sunken portion complete all as specified and directed. |
| 18 | M&L for Lean Cement Concrete (1:3:6) type C-0 using 10mm graded crushed stone aggregate as in filling back sides of pressed steel frames complete all as specified and directed. |
| 19 | M&L for Cast-in-Situ Plain Cement Concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in bed blocks for hold fasts roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including form work complete all as specified and directed. |
| 20 | S&F Pressed steel frames made of 1.25mm thick CRCA sheet of profile 125x60mm for door and window frames with one or more rebates incl lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint incl hinges, hold fasts/lugs etc including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified. |
| 21 | S&F Pressed steel frames made of 1.25mm thick CRCA sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified. |
| 22 | S&F 35mm thick 2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed. |
| 23 | S&F 35mm thick, 2nd class hard wood (Hollock), Plain framed, panelled wooden shutter (any number of panels) of second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: suppliedand fitted to chowkats complete all as specified and directed. |
| 24 | S&F factory made 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, laminated with 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern approved, fixed with approved adhesive as per manufacturer's instructions including 6mm thick teakwood lipping fixee with adhesive and headless nails complete all as specified and directed. |
| 25 | S&F Anodised aluminium frame powder coated (minimum 50micron thickness of epoxy powder coating) for door, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 26 | S&F Anodised aluminium window and ventilator shutters, powder coated aluminium(minimum 50micron thickness of epoxy powder coating) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed. |
| 27 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge,complete all as specified and directed. |
| 28 | S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters, complete all as specified and directed. |
| 29 | S&F 50mmx47mm size solid PVC door frame made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified shown on drawing and specified and directed. |
| 30 | S&F factory made 30mm thick (style) solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified shown on drawing and specified and directed. |
| 31 | S&F 18mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessories (magnetic catcher, knobs) as in shelves/shutters with rebates fixed on PVC on three sides as in supporting block to shelves complete all as specified and directed. |
| 32 | S&F 18mm thick Prelaminated particle board, exterior grade, prelaminated with one side decorative face of laminations, flat pressed, single or three layer type with BWP type phenol formaldihide adhesive as in cupboard /wardrobe shutters complete all as specified and directed. |
| 33 | S&F in repairs 18mm thick Celuka plywood of grade 1 quality one side prelaminated and otherside plain wihite colour to make kitchen cabinet/drawer/cub board shutters complete all as specified and directed. |
| 34 | S&F in repairs 18mm thick Celuka plywood of grade 1quality, both side prelaminated plain white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete all as specified and directed. |
| 35 | S&F in repairs 12mm thick Celuka plywood of grade 1 quality, both side plain white colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen, cabinet back and pull out drawer sides complete all as specified and directed. |
| 36 | S&F 6mm thick Plywood, 5 Nos of ply, grade BWR, type BB fixed with Steel/Wooden framework complete all as specified and directed. |
| 37 | S&F auto closing hinges 35 mm of 0 crank OR 8 crank openable at 110 degree for kitchen cabinet shutters complete all as directed by Engineer-in-Charge. |
| 38 | S&F Ball bearing runners 45mm Telescopic, full extension load capacity 50 Kgs, Complete all as directed by Engineer-in-Charge. |
| 39 | S&F stainless steel handles 100mm size for kitchen cabinet shutters complete all as directed by Engineer-in-Charge. |
| 40 | S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 795mmx500mmx150mm with necessary fixing clips steel screws etc complete all as specified and directed. |
| 41 | S&F chrome plated stainless steel wire basket (Plate basket) pull out type, size 530mmx500mmx100mm with necessary fixing clips steel screws etc complete all as specified and directed. |
| 42 | S&F chrome plated stainless steel wire basket (Cutlery basket) pull out type, size 380mmx500mmx100mm with necessary fixing clips steel screws etc complete all as specified and directed. |
| 43 | S&F chrome plated stainless steel wire basket (Grain trolley) pull out type, size 380mmx500mmx100mm with necessary fixing clips steel screws etc complete all as specified and directed. |
| 44 | S&F chrome plated stainless steel wire basket (Thali basket) pull out type, size 530mmx500mmx100mm with necessary fixing clips steel screws etc complete all as specified and directed. |
| 45 | S&F 100mm size butt hinges of extruded aluminium alloy with galvanised steel hing pins, anodised and type B-21 complete all as specified and directed. |
| 46 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed with steel screws complete all as specified and directed. |
| 47 | S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed with steel screws complete all as specified and directed. |
| 48 | S&F 150mm size aluminium door handle, extruded aluminium alloy, fabricated type complete all as specified and directed. |
| 49 | S&F stainless steel continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 40mm, fixed with steel screw complete all as specified and directed. |
| 50 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 51 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, with 150mm overall length of cover plate fixed in floor complete all as specified and directed, |
| 52 | S&F in repairs 100mm size, 4-Lever Aluminium Mortice lock, vertical type complete all as specified and directed. |
| 53 | S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed. |
| 54 | S&F PTMT butt hinges,100mm long, fixed with steel screws with brass /bronze hinges pin complete all as specified and directed. |
| 55 | S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed. |
| 56 | S&F in repairs Aluminium body hydraullically regulated door closer universal type, suitable for door shutters of 851 to 1000mm width & of weight between 61 to 80kg complete allas specified and diected. |
| 57 | S&F in repairs Stainless Steel Wire Cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 58 | S&F 5.5mm thick, plain sheet glass, ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 59 | S&F 3.0mm thick, plain sheet glass, ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 60 | S&F 3.0mm thick, figured glass, pin headed type and and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 61 | S&F Structural Steel Fe-410- W(Gde E-250) quality 'B' Rolled sections as in Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.tes complete all as specified and directed. |
| 62 | M&L for Welding in repairs exc 6mm but n exc 9 cm in length, thickness of metal to be welded complete all as specified and directed. |
| 63 | M&L for 50mm thick Plain Cement Concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in sub base of flooring, surface finished even and fair complete all as specified and directed. |
| 64 | M&L for 25mm thick Plain Cement Concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in surface finished rough to receive floor topping, surface finished even and fair complete all as specified and directed. |
| 65 | M&L for 10mm thick (square/ rectangular) Vitrified Tiles, light colour, polished, area of each tile not exceeding 0.36Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 66 | M&L for 10mm thick (square/ rectangular) Vitrified Tiles, light colour, polished, area of each tile not exceeding 0.36Sqm, in vertical surfaces such as skirtings, dados, risers and steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10mm thick rendering cement plaster in cement mortar (1:4) complete all as specified and directed. |
| 67 | M&L for 7 to 8 mm thick (square/ rectangular) Non-skid Ceramic Tiles coloured, premium quality, area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 68 | M&L for 7 to 8 mm thick (square/ rectangular) Non-skid Ceramic Tiles coloured, premium quality, Joint-free, area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 69 | M&L for 7 to 8 mm thick (square/ rectangular) Non-skid Ceramic Coloured Tiles, Joint-free, premium quality, area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm, in vertical surfaces such as skirtings, dados, risers and steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10mm thick rendering cement plaster in cement mortar (1:4) complete all as specified and directed. |
| 70 | M&L for 7mm thick (Area 450 x 300mm / 450x350mm/ 350x250mm/300x200mm) Glazed Ceramic Coloured Tiles, in vertical surfacesX 7 mm th set and jonnted in cement slurry and pointed in white or coloured cement in vertical surfaces such as skirtings, dados, risers and steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10mm thick rendering cement plaster in cement mortar (1:4) complete all as specified and directed. |
| 71 | M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paverblocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 72 | M&L for 10mm thick rendering cement plaster in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 73 | M&L for 15mm thick rendering cement plaster in cement mortar (1:4) on any faces of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 74 | M&L for 15mm thick rendering cement plaster in cement mortar (1:4) in screed bed or bedding layer or cement plater to the sunken portion, mixed with water proofing complound as per manufacturer's instructions finished even and fair without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid separately. |
| 75 | M&L for 5mm thick rendering cement plaster in cement mortar (1:3) on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 76 | Supply only Liquid water proofing compound complete all as specified and directed. (Note:- WPC shall be mixed @ 200ml/50Kg of cement or as specified by the Manufacturer's Instructions, whichever is more.) |
| 77 | M&L for water proofing treatment to sunken floors of Kitchen, toilets, laboratories, bath and WC's etc shall be as under :- (i) Application of two components of Acrylic modified Cementitious coating(aa) Clean the RCC Surface with wire brush and chisel out and mortar sticking to Surface(ab) Apply FOSROC NITOPROOF 600 PF (min 0.8mm dft) over a priming coat of NITOPROOF WB Primer or equivalent of ASIAN PAINT/SIKA/BERGER/PIDILITE DR FIXIT(ac) Provide HDPE 1.0mm thick Sheet before laying of any floor finishes. |
| 78 | S & F in repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES Schedule Part-I & II complete all as specified and directed. |
| 79 | S&F 2 mm the fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with self tapping screw complete all as specified and directed. |
| 80 | S&F 0.50mm thick Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified complete all as specified and directed. |
| 81 | S&F 0.50mm thick Pre- painted galvalume aluminum zinc coating GI based plain steel sheetof an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified |
| 82 | M&L for complete removal of existing treatment on walls and distempering with two coats of cement base paint over one coat of alkali resistant cement primer complete all as specified and directed. |
| 83 | M&L for complete removal of existing treatment on walls and distempering with two coats of distemper oil emulsion white or tinted over one coat of cement primer over 1mm thick plaster of paris putty to prepare surface even and smooth complete all as specified and directed. |
| 84 | M&L for applying 2.0 mm thick wall care putty omn surface of walls to prepare surface even and smooth complete all as directed. |
| 85 | M&L for Complete removal of existing treatment on wall / ceiling surfaces, including cornices, pilasters, etc, by scrapping down with wire brushes and removing existing loose finishes, paricles, apply after finishing wall surface with birla wall care putty /JK wall care putty to get fair finish on that two coats of acylic (100%) exterior emulsion paint over a coat of external cement primer complete all as specified and directed. Note:Necessary form work/scaffolding all are included in the above quotated rate. Make:Asian paints (Apex Ultima)/Berger paints (weather coat all guard)/Jenson & Nicholson (safe guard) Make:Birla Wall care putty and JK White Putty etc.. omplete all as specified and directed. |
| 86 | M&L for Complete removal of existing treatment on Terra Cotta floor surfaces like a pathways pavers, chequered tiles, interlocking paver blocks , roof tiles etc including necessary praparion of surfaces and applying two coats of terra cotta over a coat of primer complete all as specified and directed. |
| 87 | M&L for preparing old plastered surfaces of walls including washing, rubbing down and stopping distempered and painted surfaces and distempering with one coat of distemper oil emulsion white or tinted complete all as specified and directed. |
| 88 | M&L for preparing old plastered surfaces of walls including washing, rubbing down and stopping distempered and painted surfaces and distempering with one coat of cement base paint white or tinted complete all as specified and directed. |
| 89 | M&L for preparing old surfaces decorated plastered or unplastered surfaces of walls and applying one coat of lime white wash complete all as specified and directed. NOTE:-Preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots. |
| 90 | M&L for preparing old plastered surfaces of ceiling and applying one coat of lime white wash complete all as specified and directed. NOTE:-Preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots. |
| 91 | M&L for preparation of new wood or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 92 | M&L for preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 93 | M&L for preparation of old wood or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 94 | M&L for preparation of old steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 95 | M&L for preparation of old steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 96 | S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls or floors complete all as specified and directed. Note:- Only Pipe along the centre line shall be measured and paid except fittings and accessories which shall be measured and paid for separately under respective items.) |
| 97 | S&F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls or floor complete all as specified and directed.Note:- Only Pipe along the centre line shall be measured and paid except fittings and accessories which shall be measured and paid for separately under respective items.) |
| 98 | S&F 75mm dia PVC (SWR) bends any radius with oval type access door complete all as specified and directed. |
| 99 | S&F 110mm dia PVC (SWR) bends any radius with oval type access door complete all as specified and directed. |
| 100 | S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 101 | S&F 20mm outer diameter CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. (Note:- Special fittings shall be measured and paid for as \\"S&F\\". |
| 102 | S&F special fittings of Brass elbow for 20mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 complete all as specified and directed. |
| 103 | S&F special fittings of Brass Tee for 20mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 complete all as specified and directed. |
| 104 | S&F special fittings of Male Brass Threaded Adaptor (MTA/ MBTA) for 20mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 complete all as specified and directed. |
| 105 | S&F special fittings of Female Brass Threaded Adaptor (FTA/ FBTA) for 20mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 complete all as specified and directed. |
| 106 | S&F special fittings of Tank Adaptor for 20mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 complete all as specified and directed. |
| 107 | S&F special fittings of Union for 20mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 complete all as specified and directed. |
| 108 | S&F 15mm bore Galvanised Medium Grade Steel Water Tubing with all fittings and connections fixed complete to walls and celling or laid in floor, complete all as specified and directed. |
| 109 | S&F 20mm bore Galvanised Medium Grade Steel Water Tubing with all fittings and connections fixed complete to walls and celling or laid in floor, complete all as specified and directed. |
| 110 | Fixing only old retrieved serviceable 15mm bore Galvanised Medium Grade Steel Water Tubing and fixed to walls,and ceilings or laying in floors in new or old position with and including new fittings and connections complete all as specified and directed. |
| 111 | Fixing only old retrieved serviceable 20mm bore Galvanised Medium Grade Steel Water Tubing and fixed to walls,and ceilings or laying in floors in new or old position with and including new fittings and connections complete all as specified and directed. |
| 112 | S&F in repairs 15mm bore Bib Taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 113 | S&F in repairs 15mm bore fancy type, chromium plated, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 114 | S&F in repairs 15mm bore fancy type, chromium plated, Stop valves, cast copper alloy, with long shank and cup concealed type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 115 | S&F in repair pressure Jet spray of chromium plated steel for EWC seats with and including including PVC connection and CP fittings complete all as specified and directed. |
| 116 | S&F in repairs 15mm bore Pillar Taps, fancy type, chromium plated, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 117 | S&F in repairs 15mm PVC connections 450mm long heavy duty with brass nuts adaptors and washers and rubber gaskets at both ends complete all as specified and directed. |
| 118 | S&F in replacement 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), three layered, ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule hoisted and fixed including dismentling and taking down old unserviceable water tank capacity 500 litres complete as specified in SSR Part-I. complete all as specified and directed. |
| 119 | S&F in replacement 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), three layered, ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule hoisted and fixed including dismentling and taking down old unserviceable water tank capacity 1000 litres complete as specified in SSR Part-I. complete all as specified and directed. |
| 120 | S&F in repair 20 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic float ball screwed for iron pipe complete all as specified and directed. |
| 121 | S&F in repairs Wash Hand Basins, Vitreous China (flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste fittings, 32 mm bore PVC flush pipe with long screwed shucks and fly nuts and including PVC discharge pipe complete all as specified and directed. |
| 122 | S&F in repairs Vitreous China Squatting Pan, \\"Orissa pattern\\", size 580x440mm white/ coloured with integral foot rests (excluding flushing cistern, flush pipe and waste pipe), including trap and connection to trap, and to flushing pipe, anti-syphonage pipe, etc.complete including all joints and making good to floors complete all as specified and directed. |
| 123 | S&F in repairs Vitreous China Wash Down Water Closet Pan (pedestal pattern) complete, white/ coloured including seat and cover, trap, including connection to drain (or outgoing pipe), and to flushing pipe, anti-syphonage pipe, etc. etc.complete including all joints and making good to floors complete all as specified and directed. |
| 124 | S&F in repairs 10 litres capacity low level PVC valveless syphonic action type flushing cistern with inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 125 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and directed. |
| 126 | S&F Corner glass shelves 225mm radius,6mm thick as per sample for bath room, fixed on suitable support all as directed complete all as specified and directed. |
| 127 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 128 | S&F in repairs spindle for 15mm bore for CP brass fancy Bib Cock complete all as specified and directed. |
| 129 | S&F in repairs CP brass Handle for 15mm bore CP Bib tap complete all as specified and directed. |
| 130 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmcomplete all as specified and directed. |
| 131 | S&F in repair Stainless steel plate rack of standard pattern & of size 900 x 750 x 250 mm.The thickness of stainless steel sheet shall be 1.00 mm & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed. |
| 132 | S&F in repairs 125mm dia Chromium plated brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of chromium plated brass including fixing complete to steel pipe or union complete all as specified and directed. |
| 133 | S&F in repirs 600mmx450mm size of specified thickness looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel around, mounted on 6mm thick commercial ply or AC building board, fitted to wooden plug with chromiumplated brass screws and cup washers complete all as specified and directed. |
| 134 | S&F 600x1350 mm Long Vertical Looking mirror (Dressing mirror) of selected quality glass and backing with 6mm thick AC building board and fixed with steel/wooden frame to wall with chromium plated brass screws and cup washers complete all as specified and directed. |
| 135 | S&F factory made PVC body toilet cabinet (box type) 600x450mmx125mm size with mirror of selected quality glass having 5.5mm thickness and fixed to walls with screws and wooden/rawl plugs complete all as specified and directed. |
| 136 | S&F in repairs 20mm dia Aluminium Anodised tubular Towel Rail 600mm long between flanges type \\"D\\", with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms)complete all as specified and as directed. |
| 137 | S&F CP Soapdish Oval /squaretype as fixed in repairs and all as specified and directed. |
| 138 | S&F CP Toilet Paper Holder with Flap as fixed in repairs and all as specified and directed. |
| 139 | S&F one piece Vitreous china wash down water closet pan (pedestal pattern)white/coloured cascade type640X360X690 (monolithic flush cistern type)Make: Jaquare Model NO:SLS WHT-6853S/CERA Cat No: s1013132 s single picece wc with PP seat cover ,Hinges fixing accessories set including flush cistern with S-Trap of size 220mm all as per manufacturing instructions and all as specified and directed. |
| 140 | S&F wall hung vanity type wash hand basin cabinet of size 805x450 mm with wash basin (white) complete all as specified and directed. |
| 141 | S&F in repair to CP towel ring square complete all as specified and directed. |
| 142 | S&F in repair Seat Cover(Whitecolour) for pedestal pattern as fixed in repairs |
| 143 | S&F in repairs 20mm dia stainless steel curtain rod with fancy type brackets (steel) including with all fittings as fixed in repairs and all as specified and directed. |
| 144 | S&F in repairs 20mm dia mild steel PVC colour powder coated curtain rod with fancy type brackets including with all fittings as fixed in repairs and all as specified and directed. |
| 145 | S&F in repairs 10mm thick selected quality glass edges to be polished and rounded fixed to walls with PVC rawl plugs/ gutties with chromium plated brass screws and cup washers complete all as specified and directed. |
| 146 | S&F in repairs 15mm bore chromium plated Wall Mixer for (Wall Mixer, Kitchen Mixer, WHB Mixer) for mixing hot and cold water screwed down for pipe connecting legs and wall flange complete all as per manufacturer's instruction, with 450mm long braded hoses and as directed. |
| 147 | S&F in repairs 15mm bore chromium plated Wall mixer wall mounted for mixing hot and cold water screwed down for pipe with provision of overhead shower complete with 115 mm long bend pipe on upper side,connecting legs and wall flange for WHB,and kitchen sinks complete all as per manufacturer's instruction and as directed. |
| 148 | S&F in repairs 15mm bore chromium plated Wall mixer wall ( Non-telescopic/ Non-over head shower type) mounted for mixing hot and cold water screwed down for pipe with provision of overhead shower complete with 115 mm long bend pipe on upper side,connecting legs and wall flange for WHB,and kitchen sinks complete all as per manufacturer's instruction and as directed. |
| 149 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 150 | Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as specified and directed. |
| 151 | M&L for point wiring with PVC insulated unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in and including 20mm dia non metallic rigid PVC conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and mild steel pressed / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire cable of size 1.5 Sqmm unsheated stranded copper conductor with green PVC FRLSH insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch. Note:- Cutting chases for conduits and sunken boxes and making good to walls, floors etc, in case of recessed and concealed conduit wiring are included in item of taking down point wiring carefully. |
| 152 | ditto all as per item No 151 above but for one socket outlet on the same board controlled by one single pole one way switch |
| 153 | ditto all as per item No 151 above but for one 5 amps socket outlet independent controlled by one single pole 5 Amp switch. |
| 154 | M&L for point wiring with PVC insulated unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in Existing non metallic rigid PVC conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing mild steel pressed / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire cable of size 1.5 Sqmm unsheated stranded copper conductor with green PVC FRLSH insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch. |
| 155 | ditto all as per item No 154 above but for one 5 amps socket outlet independent controlled by one single pole 5 Amp switch. |
| 156 | M&L for point wiring with PVC insulated unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 2.5 Sqmm (nominal area) in and including non metallic rigid PVC conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing mild steel pressed / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire cable of size 2.5 Sqmm unsheated stranded copper conductor with green PVC FRLSH insulation connected to common earth dolly complete all as specified and directed for one 3/5 pin 15 Amps switch socket out let on the independent board controlled by one single pole one way switch. Note:- Cutting chases for conduits and sunken boxes and making good to walls, floors etc, in case of recessed and concealed conduit wiring are included in item of taking down point wiring carefully. |
| 157 | M&L for point wiring with PVC insulated unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 2.5 Sqmm (nominal area) in Existing non metallic rigid PVC conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing mild steel pressed / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire cable of size 2.5 Sqmm unsheated stranded copper conductor with green PVC FRLSH insulation connected to common earth dolly complete all as specified and directed for one 3/5 pin 15 Amps switch socket out let on the independent board controlled by one single pole one way switch. |
| 158 | S&Fin repairs new MS pressed steel/cast iron sunken boxes rectangular block in replacement of old rusted sunken box. The MS pressed steel/CI Box shall be galvanised or painted black with two coats of black bituminous paint or any other paint as indicated complete all as specified and directed. The MS pressed steel/cast iron sunken boxes should be suitable for mounting of normal /modular switches, sockets, fan regulator etc and the item rate quoted also including making good the disturbed surfaces to match with the existing surface. The new MS pressed steel / cast iron sunken boxes should be following sizes with suitable thickness as per IS code.(a) 8\\" x 10\\" and suitable for main switch board. |
| 159 | ditto all as per item No 158 above but of size 7\\" x 4\\" and suitable for 15 Amp Independent board. |
| 160 | ditto all as per item No 158 above but of size 4\\" x 4\\" and suitable for 05 Amp Independent board. |
| 161 | S&F in repairs 3mm thick bakelite sheet hylam of white top fixed with cup washers, machine screws on new / existing MS shuken box including removing existing switch / switch socket / bell push etc and refixing the only servicable switches/socket by making slots on new sheet complete all as specified and directed.(a) Min approx size 9\\" x 11\\" and suitable for main switch board. |
| 162 | ditto all as per item No 161 above but of Min size 8\\" x 5\\" and suitable for 15 Amp Independent board. |
| 163 | ditto all as per item No 161 above but of Min size 5\\" x 5\\" and suitable for 05 Amp Independent board. |
| 164 | S&F Modular Switch, one way, 6A, module complete all as specified and directed. |
| 165 | S&F Modular Switch, one way, 16A, module complete all as specified and directed. |
| 166 | S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 167 | S&F Modular Socket, 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 168 | S&F Modular white cover plate with frame, 1 module complete all as specified and directed. |
| 169 | S&F Modular white cover plate with frame, 2 module complete all as specified and directed. |
| 170 | S&F Modular white cover plate with frame, 3 module complete all as specified and directed. |
| 171 | S&F Modular white cover plate with frame, 4 module complete all as specified and directed. |
| 172 | S&F Modular white cover plate with frame, 6 module complete all as specified and directed. |
| 173 | S&F Modular white cover plate with frame, 8 module complete all as specified and directed. |
| 174 | S&F Modular Metal Flush Box, 1/2 module complete all as specified and directed. |
| 175 | S&F Modular Metal Flush Box, 3 module complete all as specified and directed. |
| 176 | S&F Modular Metal Flush Box, 4 module complete all as specified and directed. |
| 177 | S&F Modular Metal Flush Box, 6 module complete all as specified and directed. |
| 178 | S&F Modular Metal Flush Box, 8 module complete all as specified and directed. |
| 179 | S&F Modular Metal Flush Box, 3 module complete all as specified and directed. |
| 180 | S&F Modular Bell Push 6A, I module complete all as specified and directed. |
| 181 | S & F Modular step type regulator,120 W - 2 module complete all as specified and directed. |
| 182 | S & F Modular step type regulator,120 W - 2 module complete all as specified and directed. |
| 183 | S&F 5/6 Amp Switch piano flush type single pole one way ISI Marked complete all as specified and directed. |
| 184 | S&F 15/16 Amp Switch piano flush type single pole one way ISI Marked complete all as specified and directed. |
| 185 | S&F 5/6 Amp Socket outlet 2 in1, 3 pin flush type ISI marked complete all as specified and directed. |
| 186 | S&F 15/16 Amp Socket outlet 2 in 1, 3 pin flush type ISI marked complete all as specified and directed. |
| 187 | S&F 5/6 Amp bell push flush type ISI marked complete all as specified and directed. |
| 188 | S&F Ceiling Roses Ceiling rose, 3 phase/PVC/polycarbonate, isolated body omplete all as specified and directed. |
| 189 | S&F Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings ISI marked complete all as specified and directed. including 10W LED Bulb omplete all as specified and directed. |
| 190 | S&F bell, Ding Dong AC. 230 Volts, single pole complete all as specified and directed. |
| 191 | S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and directed. |
| 192 | S&F in repairs Modular Switch, one way, 6A, module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 193 | S&F in repairs Modular Switch, one way, 16A, module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 194 | S&F in repairs Modular Socket, 6A - 2/3 pin combined 2 module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 195 | S&F in repairs Modular Socket, 6A/16A - 2/3 pin combined 2 module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 196 | S&F in repairs Modular white cover plate with frame, 1 module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 197 | S&F in repairs Modular white cover plate with frame, 2 module complete, including taking down/out/dismantling unserviceable fitting/fitment/fixure, all as specified and directed. |
| 198 | S&F in repairs Modular white cover plate with frame, 3 module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 199 | S&F in repairs Modular white cover plate with frame, 4 module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 200 | S&F in repairs Modular white cover plate with frame, 6 module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 201 | S&F in repairs Modular white cover plate with frame, 8 module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 202 | S&F in repairs Modular Metal Flush Box, 1/2 module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 203 | S&F in repairs Modular Metal Flush Box, 3 module complete, including taking down/out/dismantling unserviceable fitting/fitment/fixure, all as specified and directed. |
| 204 | S&F in repairs Modular Metal Flush Box, 4 module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 205 | S&F in repairs Modular Metal Flush Box, 6 module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 206 | S&F in repairs Modular Metal Flush Box, 8 module complete, including taking down/out/dismantling unserviceable fitting/fitment/fixure, all as specified and directed. |
| 207 | S&F in repairs Modular Metal Flush Box, 3 module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 208 | S&F in repairs Modular Bell Push 6A, 1 module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 209 | S&F in repairs Modular step type regulator,120 W - 2 module, including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 210 | S&F in repairs Modular step type regulator,120 W - 2 module including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 211 | S&F in repairs 5/6 Amp Switch piano flush type single pole one way ISI Marked including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 212 | S&F in repairs 15/16 Amp Switch piano flush type single pole one way ISI Marked complete, including taking down/out/dismantling unserviceable fitting/fitment/fixure, all as specified and directed. |
| 213 | S&F in repairs 5/6 Amp Socket outlet 2 in1, 3 pin flush type ISI marked including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 214 | S&F in repairs 15/16 Amp Socket outlet 2 in 1, 3 pin flush type ISI marked including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 215 | S&Fin repairs 5/6 Amp bell push flush type ISI marked including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 216 | S&F in repairs Ceiling Roses Ceiling rose, 3 phase/PVC/polycarbonate, isolated body including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 217 | S&F in repairs Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings ISI marked including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 218 | S&F in repairs bell, Ding Dong AC. 230 Volts, single pole including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 219 | S&F in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required including taking down/out/dismantling unserviceable fitting/fitment/fixure, complete all as specified and directed. |
| 220 | Fix only old serviceable 5/6 Amp Switch piano flush type single pole one way ISI Marked, retrieved after taking down fittings complete all as specified and directed. |
| 221 | Fix only old serviceable 15/16 Amp Switch piano flush type single pole one way ISI Marked, retrieved after taking down fittings complete all as specified and directed. |
| 222 | Fix only old serviceable 5/6 Amp Socket outlet 2 in1, 3 pin flush type ISI marked, retrieved after taking down fittings complete all as specified and directed. |
| 223 | Fix only old serviceable 15/16 Amp Socket outlet 2 in 1, 3 pin flush type ISI marked, retrieved after taking down fittings complete all as specified and directed. |
| 224 | S&F in reapirs 300mm sweep Exhaust Fan, steel body AC single Phase. 230V with blades and frame and louvers with Copper winding, including taking down complete all as specified and directed. |
| 225 | S&F in repairs exhaust fan blades louvers and setters for 200mm sweep plastic Exhaust Fan including taking down complete all as specified and directed. |
| 226 | S&F in repairs exhaust fan blades, frame and louvers for 300mm sweep steel Exhaust Fan including taking down complete all as specified and directed. |
| 227 | S&F in repairs fan motor for 300mm sweep plastic Exhaust Fan, 230 Volts, 50 Hz, 1200RPM, copper winding, including taking down complete all as specified and directed. |
| 228 | S&F in repairs high quality PP blades of silent operation for Wall mounting fan 400mm sweep white colour, including taking down complete all as specified and directed. |
| 229 | S&F in repairs 400mm sweep wall mounting fan with corrosion resistant guards with strip white colour, including taking down complete all as specified and directed. |
| 230 | S&F in repairs 200mm sweep Wall Mounting Fan, steel body, powerful copper winding motor, tilting control and oscillation knob, AC single Phase. 230V with blades and frame, including taking down, complete all as specified and directed. |
| 231 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete all as specified and directed. |
| 232 | S&F in repairs LED light fiting 1x 20 W, 230 Volts, AC, decortive box type with driver holder including LED tube light, connected up with three core flexible copper conductor PVC cable of suitable size, from ceiling rose, including taking down, complete all as specified and directed. |
| 233 | S&F in repairs LED tube light fitting 1x9 W batten type fixed on wall/ ceiling etc. connected up with three core flexible copper conductor PVC cable of suitable size, from ceiling rose, including taking down, complete all as specified and directed. |
| 234 | S&F in repairs decortive gate light/ garden light made up of high grade unbreakable polycarbonate material suitable for LED lamp B22-Moon 200 base suitable for mounting Pole dia 60mm max OD. Dimensions: width 200mm and height 227mm for moon 200 decorative gate light, including taking down, complete all as specified and directed. |
| 235 | S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed. |
| 236 | S&F LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed. |
| 237 | S&F in repairs sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired TPN DBs, 415 Volts 200Amps rated bus bar,Neutral link,Earth bar and Din rail, 4 ways dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified. |
| 238 | S&F in repairs sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 Volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 ways dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified. |
| 239 | S&F in repairs sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 Volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 4 ways dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified. |
| 240 | S&F in repairs Moulded Case Circuit Breaker (MCCB) Four Poles (FP) current carrying capacity 63Amp, 415 Volts, breaking capacity 16 KA with adjustable thermal and magnetic settings, complete all as specified and directed. |
| 241 | S&F in repairs Miniature Circuit Breaker (MCB) Single Pole (SP) current carrying capacity 6 to 32 Amp, 240V, breaking capacity 10 KA, type 'B' curve in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 242 | S&F in repairs Miniature Circuit Breaker (MCB) Single Pole and Neutral (SPN) current carrying capacity 40 Amp, 240V, breaking capacity 10 KA, type 'C' curve in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 243 | S&F in repairs Miniature Circuit Breaker (MCB) Single Pole and Neutral (SPN) current carrying capacity 63Amp, 415V, breaking capacity 10 KA, type 'C' curve in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 244 | S&F in repairs Single Pole two Pin and Earth Plug and Socket including one single pole MCB 20 Amp fixed in and including sheet Metal enclosures, including taking down, complete all as specified and directed. |
| 245 | S&F in repairs submain wiring with two single core PVC insulated FRLSH cable with Copper conductor unsheathed cable of size 6.0Sqmm drawn through in and including 25mm dia non metallic rigid PVC conduit with all accessories including one 6.0Sqmm PVC insulated FRLSH cable with Copper conductor unsheathed cable single core for continuous earthing including taking down existing submain wiring and conduits etc complete all as specified and directed. ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0Sqmm and one run of 6.0Sqmm PVC insulated copper conductor single core (2x6.0Sqmm+1x6.0Sqmm earth wire) and one run of PVC conduit shall be measured as single run) Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
