|
| 1 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed. |
| 2 | M & L for fly ash brick work old size brick sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in in CM (1:6) etc including demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified. |
| 3 | M & L for fly ash brickwork with sub class \\"B' old size brick straight or curved on plan to any radius in half brick thick built in cement mortar 1:4 etc including demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as directed. |
| 4 | M & L for rendering 15mm thick in cement mortar 1:6 on fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement incl taking down cement or cement lime plaster including tiles if exists, from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. including removing of rubbish off the premises complete all as specified and directed. |
| 5 | M&L rendering 15mm thick in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound @ 3% by wt of cement incl taking down cement or cement lime plaster including tiles if exists, from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. including removing of rubbish off the premises complete all as specified and directed. Note : WPC shall be measured and paid seprately under respetive item as supply only. |
| 6 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, incl taking down cement or cement lime plaster including tiles if exists, from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. including removing of rubbish off the premises complete all as specified and directed. |
| 7 | Supply only integral water proofing compound ISI Marked. |
| 8 | M & L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade over and including a coat of primer complete all as specicified. |
| 9 | M & L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistant primer of approved shade/tint complete all as specified. |
| 10 | M&L for preparation of newly plastered surfaces of ceiling & applying two coats of white wash, complete all as specified. |
| 11 | M& L for dark shade Vitrified ceramic tile 10 mm thick (Square/rectagular) polished,area of each tiles n exceeding 0.42 but n.exc 1 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match 15 mm thick screed in CM 1:6 including dismantling old floor tiles including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 12 | M & L for Virified Ceramic tiles double charge/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqm,n.exc 1 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 including dismantling old floor tiles including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 13 | M & L for non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, including 15 mm thick screed in CM 1:6 including dismantling old floor tiles including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 14 | M & L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors joints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, incl including dismantling old floor tile including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 15 | M & L for glazed ceramic coloured tiles 7mm thick 600 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. Etc including 10 mm thick rendering in CM 1:4 including dismantling of existing hearth or wall tiling including cement mortar plaster (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 16 | M & L for glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc including 10 mm thick rendering in CM 1:4 including dismantling of existing hearth or wall tiling including cement mortar plaster (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 17 | M & L for 50 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using extra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3). |
| 18 | M & L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate surface finished even and smooth using extra cement as in flooring floor laid in pannel area not exc 2 Sqm complete all as specified and as directed. |
| 19 | Supply only 3 mm thick and 38 wide glass dividing strip complete all as specified and as directed. |
| 20 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any motar etc all as specified and directed. |
| 21 | M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed in CM 1:4 including cutting and polishing complete all as directed. |
| 22 | Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situation complete all as directed. |
| 23 | Demolition of cement concrete (un-reinforced) any description and laid in any position complete all as specified and directed. |
| 24 | M & L for rendering 15 mm thick wall plaster/screed bed in CM 1:3 mixed with water proofing compound complete all as specified and directed. Note :- WPC shall be measured and paid seprately under respetive item as supply only. |
| 25 | M & L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm including cleaning surfaces as in sunken complete all as specified and directed by Engr -in-charge. |
| 26 | M & L for APP based polymeric membrane mimimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric land on primed surfaced by forced/torched application complete all as specified. |
| 27 | M & L for PCC 1:7:12 type F2 as in sub base of floor mass filling using 40 mm graded aggregate complete all as specfied and directed. |
| 28 | M & L for 30 mm PCC 1:2:4 type B0 using 12.5 mm graded aggregate using water proofing compound as in sunken floor with water proofing compound as per as per manufacturer’s instructions complete all as specfied and directed. Note : Cost of WPC shall be deemed inclusive in quoted unit rate. |
| 29 | M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 30 | M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors incl taking up or down steel water tubing complete all as specified and directed. |
| 31 | M&L for galvanized steel water tubing medium grade of 20 mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors incl taking up or down steel water tubing complete all as specified and directed. |
| 32 | M&L for galvanized steel water tubing medium grade of 25 mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors incl taking up or down steel water tubing complete all as specified and directed. |
| 33 | S & F in repairs vitreous china wash down water closet pan (pedestal pattern/EWC) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and as directed. |
| 34 | S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor. |
| 35 | S & F in repairs water closet seat, cover white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and as directed. |
| 36 | S & F in repair PVC low level flushing cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified. |
| 37 | S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified. |
| 38 | S & F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m including 32mm dia waste pipe of polythelene of low or high density including 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end imbedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 including taking down old unserviceable sink with all it's fittings and fixtures complete all as specified and directed. |
| 39 | S & F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete, all as directed. |
| 40 | S & F in repairs SS grating 125mm dia with waste hole (Minimium weight 40 grams) |
| 41 | S & F in repairs PTMT grating 100mm dia without waste hole (Minimium weight 25 grams) |
| 42 | S & F in repair PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete, all as specified. |
| 43 | S & F in repair long body 15mm bore bib tap, cast copper alloy, chromium plated fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. |
| 44 | S & F in repairs 15 mm dia chromium plated fancy type angle valve pipe with capstan head long screwed shank including cp cover plate etc all as specified and directed. |
| 45 | S&F in repair 15 mm bore CP brass Central Hole Basin mixture fixed to GI pipe complete all as sp and directed. |
| 46 | S & F in repairs 15 mm bore brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe etc complete all as specified and directed. |
| 47 | S & F in repair 15mm bore chromium plated Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified. |
| 48 | S & F in repairs hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality all as specified and directed. |
| 49 | S & F in repairs CP shop dish fancy type fixed with SS screw on wall etc all as specified and directed. |
| 50 | S & F in repairs toilet paper holder CP fixed complete all as specified and directed. |
| 51 | S&F in repair PVC bath cabinet with 4 mm thick loocking mirror of overall size 560 x 410 mm fixed on wall etc complete all as specified and directed. |
| 52 | S & F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets complete all as specified and directed. |
| 53 | Supply & fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete as specified |
| 54 | S & F in repairs CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified |
| 55 | S & F in repairs 32mm/ 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor, complete, all as specified. |
| 56 | S & F in repairs 5 mm thick bevelled edge mirror of selected quality mounted on 6 mm thick AC/bldg board and fixed to 150 mm long chroumium plated brass spacer complete all as specifed and directed. |
| 57 | S & F in repairs (600mm x 450mm) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 58 | S & F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified. |
| 59 | S & F in repairs cast iron floor trap/nahani trap plan with grating of 100 mm size including jointing to waste pipe with cement joints etc complete as directed |
| 60 | S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks triple layered in white colour (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl dismantling of old tank complete all as specified and directed. |
| 61 | S & F 1000 Litre capacity Rotational moulded polyethylene water storage tanks triple layered in white colour (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl dismantling of old tank complete, all as specified and directed. |
| 62 | S & F in repairs 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, all as specified. |
| 63 | S & F in repairs gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore, all as specified and as approved by GE/Engineer-in-Charge. |
| 64 | Supply & Fixing in repair gun metal gate valve screwed both ends to15mm bore pipe complete all as specified. |
| 65 | S & F in repairs 25 mm dia stainless steel curtain rods including brackets and fancy type end knobs, complete, all as specified and directed. |
| 66 | S & F in repairs 100 mm dia cast iron (sum type) soil waste and vent pipes sand cast in any length with or without laid in wall with cement joints incl dismantling of drain pipe |
| 67 | S & F in repairs 75 mm dia cast iron (spum type) soil waste and vent pipes sand cast in any length with or without laid in trenches or in floor with cement joints |
| 68 | S & F in repairs 100 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured) |
| 69 | S & F in repairs 75 mm bore cast iron bends with acces door of any radius diminshing pieces or tappers (larger bore measured) |
| 70 | S & F in repairs 75 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured) |
| 71 | S & F in repairs 100 mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr-in-charge |
| 72 | S & F in repairs 75 mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr-in-charge |
| 73 | S & F in repairs PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement |
| 74 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each, complete, all as specified & directed. |
| 75 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete, all as specified & directed. |
| 76 | Taking down shutters exc 1.0 sqm but not exc 2.0 sqm each and removing to or from store all as specified and directed. |
| 77 | M & L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast, back filling of chowkhat etc complete all as specified and as directed. |
| 78 | S & F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 79 | S & F pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 80 | S & F 30mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and directed. |
| 81 | Supply and fixing of factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed. |
| 82 | S & F 30 mm thick IInd class hard wood locally fabricated glazed and skelton window or ventilator shutter open rebated and prepared to receive glass etc divited into square with plain chamfered or rounded, mitred beads for securing glass/gauge complete all as specified in SSR Part-I section 8 clause 8.20 (b) |
| 83 | S&F mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed 100 mm long. |
| 84 | S&F mild steel pressed handles, oval type ISI marked stove enamelled black complete all as 100 mm size specified and as directed. |
| 85 | S&F butt hinges, ISI market medium weilght cold rolled mild steel and fixed complete all as specified and as directed 75 mm size. |
| 86 | S & F Anodised aluminium powder coated frame work for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 87 | S & F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc. complete all as specified. |
| 88 | M & L 4.8 mm thick sheet glass, ordinary quality in squares exc. 0.5 Sqm in each pane |
| 89 | M&L for powder coated (min 50 micron) aluminium three track sliding window with extruded profile of top bottom & side track for fixing 5.5mm thick tinted glass fitted with glazing clips and EPDM rubber in two shutters and fixing SS wire mesh in one shutter and powder coated deco grill including roller and handle, maruti locking arrangement complete all as specified and directed by Engr-in-charge.Note:- (a) including 5.5mm thick tinted glass, SS wiremesh, Deco grill etc in this item.(b) Framed section 3 track size = 92x31.75x1.5mm(c) Shutter section size = 40x18x1.55mm |
| 90 | S&F PVC cabinet shutter as in kitchen with frame including shelves in required sizes at site made out of 18mm thick one side decorative lamination and other side balancing lamination sheet and provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets stainless screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings as per site requirmented as per make and specification mentioned as per drawing and all are specified and directed. Note:- Density of PVC soild sheet should not be less than 575 Kg/cum. |
| 91 | S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded |
| 92 | S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded |
| 93 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete |
| 94 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge |
| 95 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 96 | S & F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified. |
| 97 | S & F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified. |
| 98 | S & F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified |
| 99 | S & F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified. |
| 100 | S&F mild steel helical door spring 150mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified. |
| 101 | S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed |
| 102 | S&F Eye door viewer (Magic Eye) of suitable size fixed with panneled door shutter complete all as specified and directed. |
| 103 | S & F in repair 300mm long Stainless steel six peg hanger chromium plated as approved by engr-in-charge complete all as specified and directed. |
| 104 | S&F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including welding work complete all as specified & as directed. |
| 105 | S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane, incl hacking out old broken glass complete, all as specified. |
| 106 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples all as specified. |
| 107 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples all as specified. |
| 108 | M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified. |
| 109 | M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified. |
| 110 | S&F ball catches with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified |
| 111 | Demolition of reinforced cement concrete in floors ,beams ,chajjas,landing slab in any position or height and similar suspended works. |
| 112 | M & L for RCC 1:1.5:3 type B1 nominal mix (using 20 mm graded aggrigate)as in slab,chajjas,beam etc complete all as specified |
| 113 | Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick complete all as specified |
| 114 | M&L TMT bar 8 to 10mm dia and over, cut to length, bent ot shape required, including cranking, bending , hooking ends and binding with and including mild steel wire(annealed not less than 0.9mm dia) icluding welding,rivetting etc complete. |
| 115 | Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed. |
| 116 | S & F in repair block board, 18/19mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work complete, all as specified & directed. |
| 117 | S & F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas complete all as specified and directed. |
| 118 | Supply and fixed in repair stop valves, 15mm dia, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed. |
| 119 | S&F in repair 32 mm dia of discharge pipe bottel trap of PTMT having minimum water seal of 25 mm .(Minimum weight 32 mm -260 gms/40 mm-270 gms) etc all as specified and directed. |
| 120 | S&F in repairs long body 15mm bore two-way bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed. |
| 121 | S & F in repairs 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps incl taking down rain water pipe and eaves gutters as directed 6 Kg/Sq cm complete all as specified & directed. |
| 122 | S & F in repairs 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed |
| 123 | S&F 605 x 605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling sectin (Not exc 1.2m length) of 0.55 mm thick ness having kurled web of 50mm and flanges of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 3 mm dia gI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long incl dismantling textile covering incl frames and cover fillets compelte all as specified. |
| 124 | M&L providing and fixing gypsum boad 12 mm thick in ceiling fixed with screw as per manufactures instruction |
| 125 | M&L for application of high perfomance hybride polyurea elastomeric water proofing coating cold applied, liquid membrane at 1.5 kg/Sqm with an elongation minimum of 400 to 600% by airless spray machine and tensile strength of minimum 11-13 N/mm2 as per ASTM D2370, crack bridging ability minimum of 3 to 4 mm as per ASTM C1305 , Shore Hardness of minimum 70+5 as per ASTM D2240 complete as per directed by Engr-In-Charge. The System shall also include final base preparation including cleaning of the plaster surface etc and applying epoxy primer as approved makes in two coats at a coverage of 1 kg/Sqm, etc as per manufacturer specification, complete all as specified and directed. Note:- (a) The work pertaining to water proofing treatment shall be executed for authorized applicator through manufacture of which the materials is proposed to be used by the contractor and approved by Garrision Engingeer |
| 126 | Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removing the same to the places where directed by Engr-in-Charge. |
| 127 | M&L plain cement concrete 1:2:4 type B1 using 12.5 mm graded aggregate as in roof for maint. the uniform slope etc any thickness at any height and in any position all as specified and directed by engr-in-charge at site. |
| 128 | M & L 20 mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces on other than fair face surface , surface finished even and smooth without using extra cement using waterproofing compound fair and complete all as specified. |
| 129 | M&L for roof treatment with polymeric water proofing membrane consisting of following complete all as specified and directed :- (a) Applying bituminous primer conforming to IS 702-1988 @ 1.20 Kgs/ sqm.(b) APP modified bitumenous membrane minium weight 3 kg/sqm and minimum 3 mm thick reinforced with polyester non wove fabric ( wt. not less than 150 gms/sqm) laid on primed surface by heat process, over laps of 100 mm shall be sealed / fused by flame torch application as per manufacturer instructions.(c) Applying two coat of bituminous bases aluminium paint @ 0.2 kgs/sqm over APP membrane. |
| 130 | M & L PCC 1:2:4 for PCC type B-1 using 20 mm graded stone aggregate as in coping steps bed blocks/roof gola etc |
| 131 | S & F in repairs solid PVC wall lining consisting of 5 mm thick single side prelaminated PVC sheet used instead of plain colour sheet including 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per drawing and specification given in SSR Part II (2020) and as per directed by Engr-in-Charge. |
| 132 | S&F in repair vitreous china floor hung WC with flushing cistern, UF seat cover, hinges, accessories set of size 375 x 650 x 800/370 x 645 x 810 mm fixed to wall/floor with P/S trap complete as per manufacture's instructions all as specified and directed. |
| 133 | S&F in repair vitreous china wall hung WC, UF seat cover, hinges, accessories set of size 360 x 570x x 360 mm fixed to wall/floor with P/S trap complete as per manufacture's instructions all as specified and directed. |
| 134 | S&F in repair single piece slim concealed cistern body with installation kit & s type, drain pipe, connection set for wall hung WC complete including connection with GI pipes or connection pipe as per manufacture's instructions. |
| 135 | S&F in repair vitreous china table top Wash Hand Basin of size 635 x 430 x 190 mm with bottle trap complete all as per manufacturer's instruction all as specified and directed. |
| 136 | S&F single lever Basin mixer without popup waste system with 450 mm long braided holes etc all as specified and directed. |
| 137 | S&F in repair Towel ring 200mm dia superior quality fixed as in repair all as approved. |
| 138 | Taking down shutters exc 1.0 sqm but not exc 2.0 sqm each and refixing in same opening etc all as specified and directed. |
| 139 | S&F IInd class hard wood plain, soild chowkhats and frames wrought,framed rebated on the solid rounded or chamfered put together with glue pined at jints all as specified and directed. |
| 140 | M&L for preparation of old surfaces (plastered or unplastered) of walls/ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of plastic paint complete, all as specified & as directed. |
| 141 | Dismantling of boarding, any description ,fixed in any position with screws etc all as specified and directed. |
| 142 | M & L for 2nd class HW plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 & n exc 25 sqcm etc complete all as specified and directed. |
| 143 | M&L 12 mm thick plywood grade BWR type BB, fixed with screw to timber frame work block board interior grade having both sides commercial faces fixed with screws to timber frame work complete all as specified and directed. |
| 144 | M & L for 4 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with screwds to timber frame work complete all as specified and directed. |
| 145 | M & L for PU polish on wooden wall surface/wood based material of any description width of girth including removing/cleaning and prepration of the surface including a coat of wood filler with two or more coats as approved complete all as specified and directed. |
| 146 | Dismantling structural steel work including doors, gates but excluding framed truss etc |
| 147 | S & F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. |
| 148 | S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel plain sheet 0.50mm thick of n colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self taping screws incl dismantling of any roof coveing sheets as specified. |
| 149 | S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of n colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self taping screws incl dismantling of any roof coveing sheets as specified. |
| 150 | M & L for precast cement concrete louvers and jallies, in PCC 1:2:4 type B0 (12.5 mm graded aggregate) 40 mm thick (measured solid) including all mouldings and pillar any size and set in CM 1:4 complete all as specified. |
| 151 | M & L for marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana white including 20 mm screed bed in CM 1:6 complete all as specified and directed by Engr -in-Charge. |
| 152 | M & L for provising and fixing factory made 18 mm thick single extruded WPC (wood polymer composite) solid panel white colour board jali, CNC (Computer numeric control) routed of approved design by Engineer -in-Charge which are machine cut for duct/shaft covering partitions and facades comprising of virgin polymer of K valve 58-60 (Suspension Grade) calcium corbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum compressive strength 50N/mm2 moulds of elasticity 850 N/mm2 and resistance to spread of flame of class A category with properties of being termite/borer proof water/ moisture proof and fire reardant and fixing on M.S (mild steel) frame made of 25x25x1.5 mm square hallow box section including applying a priming coat of approved steel primer, placed at gird made at 1.00 x1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc . all complete as per direction of Engineer -in- Charge etc complete all as specified and directed. Please Enable Macros to View BoQ information |
