|
| 1 | M & L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down GI tubing 15 mm bore and connections including taking down existing pipe, complete all as specifed and directed. |
| 2 | M & L for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down GI tubing 20 mm bore and connections including taking down existing pipe, complete all as specifed and directed. |
| 3 | S & F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor, complete all as specifed and directed. |
| 4 | S & F in repair 75 mm bore PVC (SWR) bends of any radius with access to door, complete all as specifed and directed. |
| 5 | S & F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches/wall, complete all as specified and directed. |
| 6 | S & F in repair 110 mm bore PVC (SWR) bends of any radius with access to door, complete all as specifed and directed. |
| 7 | M&L 20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab, rounding edges etc including taking down old tile, complete all as specifed and directed. |
| 8 | S&F in repair viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern) and inlcuding flush pipe set of CP jet with PVC pipe of superior quality, complete all as specifed and directed. |
| 9 | S&F in repair for vitreous China water closet (squatt pan) Orrisa pattern 680x470 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern with flush pipe, complete all as specified and directed. |
| 10 | S&F in repair vitreous china urinals, flat back of size 465mmX355mmX265mm,white, bowl type, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe with grating and union for discharge pipe including connecting to waste pipe, complete all as specifed and directed. |
| 11 | S&F in repair viterous China water closet pedestal pattern in one piece type of dimension 73cmX36cm74cm including seat cover and gaset, floor mounted, 'P' or 'S' trap, flushing kit, CP jet with PVC pipe of superior quality and all necessary fixing arrangements, complete all as specified and as directed. |
| 12 | S&F in repair for sink with draining board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including waste pipe, fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 13 | S&F in repair for viterous China wash basin, white flat back, size 550x400mm including waste pipe, CP Pillar taps, waste chain and plug and porcelan stopper brackets, complete all as specifed and directed. |
| 14 | S&F in repair viterous China pedestal wash basin, white flat back, including waste pipe, CP Pillar taps, waste chain and plug and porcelan stopper brackets, complete all as specifed and directed. |
| 15 | All as per Item No 14.00 here-in-before but counter top type. |
| 16 | S&F in repair for 15 mm bore brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specifed and directed. |
| 17 | S & F in repair for 15mm bore brass chromium plated wall mixer fixed with shower rose and connecting to wall mixer, complete all as specified and directed. |
| 18 | S & F in repair for 15 mm bore brass CP wash hand basin mixer hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 19 | S&F rotational moulded polythene three layered water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 500 ltrs capacity fixed with brass tank nipples,including Ball brass valves suitable for 20 mm bore, complete all as specified in SSR Part-I including dismantling of existing tank and removing to store, complete all as specified and directed. |
| 20 | S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with Brass tank nipples, including Ball brass valves suitable for 20 mm bore complete all as specified in SSR Part-I including dismantling of existing tank and removing to store, complete all as specified and directed. |
| 21 | S&F in repair 15mm chromium plated health faucet (hand shower), inlet length 100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc complete all as specified and directed. |
| 22 | S & F in repair 15 mm dia brass chromium plated pillar tap, with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe, complete all as specified and directed. |
| 23 | S&F in repair brass CP shower rose of size 125 mm with swivel joints fixing to steel pipes etc, complete all as specified and directed. |
| 24 | S&F PVC waste pipe 600/900mm long suitable for Wash hand basins and urinals including connecting, complete all as specified and directed. |
| 25 | S&F in repair for PVC connection pipe 15mm dia for wash basin and flushing cistern with ss nuts of length 600 mm, complete all as specified and directed. |
| 26 | S&F in repair 32mm dia waste coupling, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 27 | S&F in repair CP soap dish holder fixed with including chromium plated brass screws, complete all as specified and directed. |
| 28 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 29 | S&F in repair Glass corner shelf with tempered glass, stainless steel brackets and polished chrome finish rail, complete all as specified and directed. |
| 30 | S&F in repair assembled ready to use rectangular stainless steel (Grade 304) kitchen plate rack with 3 - 4 shelves, enclosed four sides by SS plain sheet, 0.6mm square support pipes, dedicated holes for spoon, pegs etc over all size 600mm x 750mm x 250mm of standard pattern and approved make, complete all as specified and directed. |
| 31 | S & F in repair for chromium plated tubular towel rail 20 mm dia \\"D\\" type 60 cm long between flange, fixed with screw wooden/ plastic cleats, complete all as specifed and directed. |
| 32 | S&F in repair SS Towel Ring, complete all as specified and directed. |
| 33 | S&F in repair concealed type CP Stop valves, 15 mm bore of pipe, cast copper alloy CP, screwed down, high pressure, with long shank and cup, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 34 | S&F in repair 15 mm dia CP bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed. |
| 35 | S&F in repair 15 mm dia CP two way bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed. |
| 36 | S&F in repair CP angle valve, cast copper alloy, fancy type, chromium plated suitable for iron pipe and one end and PVC connector on other, ISI marked, complete all as specified and directed. |
| 37 | S&F in repair gun metal globe or Brass gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia, complete all as specified and directed. |
| 38 | S&F in repair gun metal globe or Brass gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia, complete all as specified and directed. |
| 39 | S&F 600 x 450 mm bevelled edge mirror of selected quality glass mounted on 6mm AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 40 | S&F in repair premium multipurpose wall mounted storage cabinet with mirror of hard thermosetting plastic of size 600x450mm, fitted with superior quality distortion free 4mm thick mirror, complete all as specified and directed. |
| 41 | S& F in repair CP grating with floor trap suitable for 75 mm bore floor trap and fixed with white cement in square or circular shape and with provision of hole for waste pipe connection, complete all as specified and directed. |
| 42 | S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. |
| 43 | S & F in repair for 15 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass errule and fixed, complete all as specified and directed. |
| 44 | S & F in repair 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 45 | Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site, complete all as specified and directed. |
| 46 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each removing form site, complete all as specified and directed. |
| 47 | Taking down shutters of any description area n exc 1 sqm each and removing, complete all as specified and directed. |
| 48 | Labour only for repairs to aluminium doors without taking down shutter or frame of any size any description including tightning, adjusting the shutter and handles refixing of glass, rubber beading or cleat and mortise lock etc, complete all as specified and directed. |
| 49 | Labour only for repairs to aluminium doors by taking down shutter of any size any description including tightening a djusting the shutter and handles refixing of glass, rubber beading or cleat and mortise lock and repairs to floor spring hinges by adjusting the screws, nail, nuts with greasing and fixing at same position etc, complete all as specified and directed. |
| 50 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all as per architectural drawings, complete all as specified and directed. |
| 51 | S&F aluminium powder coated of any colour window and ventilator with one or more shutters fixed / side hung type without sash bar, aluminium section weighing 0.55 kg/m including 5mm thick plain/ coloured/ frosted sheet glass, stainless steel wiremesh and connected items such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long, hinges type B - 21 100mm long, suitable handle, alum tower bolt, complete all as specified and directed.Note :- Minimum thickness of powder coating not less than 50 micron. |
| 52 | S&F aluminium powder coated of any colour door with one or more shutters aluminium section weighing 0.55 kg/m including 5 mm thick plain/ coloured/ frosted sheet glass or ACP sheet and stainless steel wiremesh and connected items such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long , hinges type B-21 100mm long , suitable handle, alum tower bolt including mortice lock and brass door stopper, complete all as specified and directed. Note :- Minimum thickness of powder coating not less than 50 micron. |
| 53 | S&F aluminum powder coated of any color three track sliding window with two or more shutter including 5mm thick plain/ coloured/ frosted sheet glass, stainless steel wiremesh and connected items such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long, SS hinges type B - 21 100mm long, suitable handle, alum tower bolt and using sections as given in 'JINDAL' catlogue, including making good to the disturbed portion, complete all as specified and directed.Note - Minimum thickness of powder coating not less than 50 micron. |
| 54 | S&F aluminum powder coated of any color fixed partition with frame of size 101.6mm x 44.45mmx1.27mm thick and 101.60mmx44.45mmx1.20mm thick with total height up to 3.20m. The panels shall be made out of 5mm thick plain /tinted(frosted) glass in top & bottom or ACP sheet including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminum snap beading screw etc including dismantling of existing partition of any type and making good to the disturbed portion, complete all as specified and directed.Note :- Minimum thickness of powder coating not less than 50 micron. |
| 55 | S&F aluminium powder coated anodized grills with bars having 6.3mm dia decorative type 75mm mesh size, complete all as specified and directed. |
| 56 | S&F pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, holdfast with and including concrete bed block, lock strike plates, complete all as specified and directed. |
| 57 | All as per Item No 56.00 here-in-before but frame size of 105mm x 60mm. |
| 58 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, holdfast and concrete bed block complete with outer side glazing bars shutter and inner side wire mesh shutter including glass panes, dovetailed or welded, complete all as specified and directed. |
| 59 | All as per Item No 58.00 here-in-before but without glazing bars. |
| 60 | S&F steel ventilators with top hung shutters including hinges and handle with steel peg stay, complete all as specified and directed. |
| 61 | M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars, side hung or barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed. |
| 62 | S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 63 | S&F factory made second class Hard wood 35 mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with commercial face veneers, complete all as specified and directed. |
| 64 | S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters, all as specified in SSR Part-I, Section 8, clause 8.24 (a), supplied and fitted to chowkhats, complete all as specified and directed. |
| 65 | M&L for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications, complete all as specified and directed. |
| 66 | M&L factory made solid PVC panel door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheety strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded.sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing, complete all as specified and directed. |
| 67 | S&F 100 mm long mild steel butt hinges, medium weight cold rolled, complete all as specified and directed. |
| 68 | S&F door closer hydraulically regulated, aluminium (extruded section body) desigtnation No 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg, complete all as specified and directed. |
| 69 | S&F Mild steel mortice lock, vertical type, size 100 mm, 4 levers in aluminium door, complete all as specified and directed. |
| 70 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 71 | S&F 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy, complete all as specified and directed. |
| 72 | S&F 125 mm long extruded anodised aluminium alloy handle, fabricated type, complete all as specified and directed. |
| 73 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed. |
| 74 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm in each pane, complete all as specified and directed. |
| 75 | Hacking out old broken glass (any thickness size, quality or description from wooden or steel frames glazed with putty/beads, complete all as specified and directed. |
| 76 | S&F GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 77 | S&F in repair GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 78 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated wood and wood based surface including preparation, complete all as specified and directed. |
| 79 | S&F in repair 140mm long floor door stopper of brass body and tongue with hard drawn steel spring, complete all as specified and directed. |
| 80 | S&F in repair SS curtain rod 20mm dia (of approved colour and design), complete all as specified and directed. |
| 81 | S&F in repair curtain brackets with finials of SS type (of approved colour and design) including fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls), complete all as specified and directed. |
| 82 | M&L for plain cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in sub base for tiling, including demolition of old concrete of any type, complete all as specified and directed. |
| 83 | M&L for Vitrified Ceramic tiles double charged 10 mm thick with highlighter tile of approved colour polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling old unserviceable of tiles, complete all as specified and directed. |
| 84 | M&L for vitrified ceramic tiles light shade (premium quality) 10mm thick with highlighter tile (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in dados / skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15mm thick rendering in cement mortar 1:4, including dismantling of old tile, complete all as specified and directed. |
| 85 | M&L for providing Mirror polished kota stone slab flooring 18- 20 mm thck over and including 20 mm thick screed in Cement morter1:3 and jointed with grey cement slurry mixed with pigment including cutting and mirror polishing including dismantling of old tile in any type, complete all as specified and directed. |
| 86 | M&L for Machine cut kota stone slab(mirror polished) flooring 18-20mm thick as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 10 mm thick in cement mortar 1:3 after dismantling old unserviceable of skirting, complete as specified and directed. |
| 87 | M&L non-skid coloured (light shade) ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick screed bed or bedding layer in CM (1:4) including dismantling of existing tile, complete all as specfied and directed. |
| 88 | M&L for coloured glazed ceramic tiles with highlighter tile in between vertical surface 450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick cement plaster in CM (1:4), including dismantling of existing tile, complete all as specified and directed. |
| 89 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 90 | M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as speified and as directed |
| 91 | M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and directed. |
| 92 | M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed. |
| 93 | All as per Item No 92.00 here-in-before but except stone. Note: Stone retrieved from item No. 89.00 will be re-used. |
| 94 | M&L for rendering 20mm thick in cement mortar 1:4 on stone surfaces of walls any typeand any height finished even and smooth without using extra cement, complete all as specified and directed. |
| 95 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 96 | M&L for rendering 15 mm thick on fair faces of brick, stone or concrete surface in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed. |
| 97 | M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a one coat primer, complete all as specified and directed. |
| 98 | M&L for preparation of old plastered surfaces of wall and applying one coat of distemper oil emulsion, complete all as specified and directed. |
| 99 | M&L for 3 mm thick wall care putty on wall, complete all as specified and directed. |
| 100 | M&L for rendering 5 mm thick in cement mortar 1:4 with Water Proofing Compound @ 3% by weight of cement over 10mm thick in CM 1:6 on external surfaces of walls of block masonry finished even & smooth without using extra cement, including wiremesh wherever required and rendering height up to four (04) storey building, complete all as specified and directed.Note: The rate to be included integral Water Proofing Compound. |
| 101 | M&L for preparation of new plastered wall surface including cornices etc and applying two coats of exterior emulsion all weather proof paint of approved colour (multi colour pattern as approved by GE) over and including a coat of primer, complete all as specified and directed. |
| 102 | M&L for complete removal of existing treatment of wall surfaces, preparation of plastered or unplastered or untreated wall surfaces including cornices etc and applying two coats of exterior emulsion all weather proof paint of approved colour (multi colour pattern as approved by GE) over and including a coat of primer, complete all as specified and directed. |
| 103 | M&L for preparation of old decorated plastered surface in Ceiling etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy oil and greasy spots and applying one coat of lime white wash on wall/ceiling, complete all as specified and directed. |
| 104 | M&L for 75 mm thick cement concrete 1:3:6 type C2, (using 40 mm graded stone aggregate) as in plinth protection laid to slope of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) including demolition of old concrete, complete all as specified and directed. |
| 105 | Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work, complete all as specified and directed. |
| 106 | M&L for MS tubular pipes joist, channel, angle, tee section, fixed independently, without connecting plates etc (cut to ordinary length ie within 20mm of the length indicated) conforming to Fe 290 grade E-165, complete all as specified and directed. |
| 107 | M&L for preparation of new of previously untreated steel or iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a one coat of red oxide primer, complete all as specified and directed. |
| 108 | S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any approved colour (multi colour pattern as approved by GE) having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of old sheet of any description and making good the disturbed surface, complete all as specified and directed. |
| 109 | S & F for Pre - painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of approved colour (multi colour pattern as approved by GE) having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions including dismantling of old sheet of any description and making good the disturbed surface, complete all as specified and directed. |
| 110 | S&F Pre painted coloured galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of an approved colour (multi colour pattern as approved by GE) having tensile strength of 550 Mpa for roofs, bent to a curve of any radius with specified side lap as per manufacturer instruction, including dismantling of old sheet of any description and making good the disturbed surface, complete all as specified and directed.. |
| 111 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at wall / ceiling, including 5mm thick PVC sheet fillet of width 35mm for wall/ceiling panelling inclusive of fixing on walls to make PVC frames complete per standard specification after dismantling of old unserviceble PVC lining of any type, complete all as specified and directed. |
| 112 | S&F solid WPC fluted or normal panels of 20 - 30 mm thick of approved colour pattern inclusive of solvent cement including sheet fillet for fixing on wall/ ceiling to make frame as per standrad specifications after dismantling of old unserviceble wall /ceiling paneling of any type, complete all as specified and directed. |
| 113 | S&F 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing board and making good the disturbed surface, complete all as specified and directed. |
| 114 | S&F in repair 12 mm Gypsum Board sheets fixed to GI/ MS Chennel section withfixing screws adhering to ceiling at same level with all required framimg and accessories, all joints shall be sealed and finished with wall care putty and two coats of smooth surface oil bound distemper of approved and shade, complete all as specified and directed. Please Enable Macros to View BoQ information |
