|
| 1 | Dismantling carefully terraced floor only (including floor finish if any) or lime terracing in ground floor roof and removing rubbish as directed within a lead of 75 m. |
| 2 | Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc.complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor:(iii) 35mm thick shutters with 19mm thick panel of size 30to 45 CmAE Room Section-II Rom |
| 3 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(vii) 100mm. X 58mm. X 1.90mm.AE Room Office Room WindowDoorSec - II |
| 4 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(c) 40mm X 6mm, 125mm LengthAE Room (Door)WindowSec-II(Door) |
| 5 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated(v) 150mm long x 12mm dia. bolt.For nylone netted windowAE Room (Door)WindowSec-II(Door) |
| 6 | Anodised aluminium decorative handle (hexagonal / fluted) of approed quality fitted and fixed (ii) 175mm plate x 12mm dia rod x 60mm hexagonal / fluted.. |
| 7 | (b) Supplying 'Godrej' mortice lock chromium plated with keys 6levers including fitting & fixing complete. |
| 8 | ii) Godrej Hydraulic door closer fitted and fixed complete.a) Heavy type |
| 9 | Iron door ring of approved quality fitted and fixed with nut and washeri)50 mm dia |
| 10 | M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. In Ground FloorAE office Room |
| 11 | Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brandconforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2 kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer) ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5 mm thick)AE office roomDedo |
| 12 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor. 12mm For wall Panneling Sec-II office roomFor TableAE Office RoomFor Table |
| 13 | 9 mm For wall Panneling Sec-II office roomAE Office Room |
| 14 | Partition of teak veneer [1 mm] as per design fitted and fixed complete (excluding the supporting frame work & necessary teak wood battens):In ground floor 4 mm thick commertial qualityFor wall Panneling Sec-II office roomAE Office Room |
| 15 | Dressed wood work in post , plate , battens . etc. fitted & fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals) Sal :Local In Ground FloorSame as Vinear area |
| 16 | French polishing to wood work including preparing surface (ordinary gloss) On new wood work In Ground FloorSame as Vinear areaWooden table french polish repair work & lifting body lum/sum |
| 17 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 18 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :(iv) Two coats (with any shade except white)Same as S.L No-54 steel surface priming area |
| 19 | Add 18% extra in respect of GST on all items, on Rs.418413.00 |
| 20 | Add 1% extra in respect of Labour Welfare Cess on items no. 1 to 18on Rs.493727.00 Please Enable Macros to View BoQ information |
