|
| 1 | Dismantling boarding, any description fixed in any position with nails, complete all as specified and as directed by Engineer-in-charge. |
| 2 | S&F 40mm thick 2nd class hardwood planed one side with tongued and grooved joints and fixed with nails as in floors, complete all as specified and as directed by Engineer-in-charge. |
| 3 | S&F 20mm thick 2nd class hardwood planed one side with butt joints as in shelves of cupboards, racks and pelmets, eaves board and skirting work fixed with nails, complete all as specified and as directed by Engineer-in-charge. |
| 4 | Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position, complete all as specified and as directed by Engineer-in-charge. |
| 5 | M&L for 2nd class HW as in scantlings timber fixed work clean sawn, complete all as specified and as directed by Engineer-in-charge. |
| 6 | M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil, complete all as specified and as directed by Engineer-in-charge. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as per specified and as directed by Engineer-in-charge. |
| 8 | M&L for vitrified ceramic tile, 10mm thick, area of each tile not exceeding 0.36 Sqm as in floor set and joint in cement slurry, jointed & pointed in white or coloured cement to match the surface including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6, complete all as specified and as directed by Engineer-in-charge. |
| 9 | All as per serial item No. 08 above, but as in skirting/dado, laid over 10 mm thick screed bed in cement mortar 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, complete all as specified and as directed by Engineer-in-charge. |
| 10 | S&F Glazed ceramic coloured tiles of 450x350x7mm thick tiles on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, over backing coat of 10 mm thick in CM 1:4, complete all as per specified and as directed by Engineer-in-charge. |
| 11 | M&L for 20 mm thick granite (of any type) tiles, machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigmint to match the shade of granite stone including griding & polishing, laid over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge. |
| 12 | Taking out old existing galvanised iron water mains 15 mm bore (including all fittings) with spigot and socket ends and fittings for re-use in the work and removing unserviceable pipes and fittings from site complete all as per specified and as directed by Engineer-in-charge. |
| 13 | Taking out old existing galvanised iron water mains 20 mm bore (including all fittings) with spigot and socket ends and fittings for re-use in the work and removing unserviceable pipes and fittings from site complete all as per specified and as directed by Engineer-in-charge. |
| 14 | S&F GI tube 15 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge. |
| 15 | S&F GI tube 20 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge. |
| 16 | Demolition of brick work built in any cement mortar complete all as specified and as directed by Engineer-in-charge. |
| 17 | M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in in CM (1:6), complete all as specified and as directed by Engineer-in-charge. |
| 18 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engineer-in-charge. |
| 19 | M&L 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge. |
| 20 | M&L rendering 15 mm thick on fair faces of brickwork in cement mortar 1:4 on other than fair faces of brick work using WPC @ 3% by weight of cement (WPC to be measured and paid separately) finishing even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge. |
| 21 | Supply only integral water proofing compound confirming to IS complete all as per specified and as directed by Engineer-in-charge. |
| 22 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whitening primer, complete all as per specified and as directed by Engineer-in-charge. |
| 23 | M&L for preparing new plastered surfaces and applying two coats of cement based paint on walls over a coat of alkali resistant primer, complete all as per specified and as directed by Engineer-in-charge. |
| 24 | M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of chalk whitening primer & putty (1mm thick) to wall surfaces including preparation of old surface of wall, complete as specified and as directed by Engineer-in-charge. |
| 25 | M&L for preparing old surface and applying three coats of white wash on ceiling, complete as specified and as directed by Engineer-in-charge. |
| 26 | M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of chalk whitening primer to wall surfaces including preparation of old surface of wall, complete as specified and as directed by Engineer-in-charge. |
| 27 | M&L for preparation of old decorated wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of any tint, complete all as specified and as directed by Engineer-in-charge. |
| 28 | All as per serial item No. 27 above, but on steel surfaces. |
| 29 | M&L for preparation of new or previously untreated wood or wood based surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engineer-in-charge. |
| 30 | M&L for five coats of melamine polishing to new or existing wooden surface of any description as per manufacturer's instructions, complete all as specified and as directed by Engineer-in-charge. |
| 31 | S&F in repair stainless steel kitchen plate rack 0.85mm thick of size 31\\" X 30\\" X 10\\" complete all as per specified and as directed by Engineer-in-charge. |
| 32 | S&F chromimum plated health faucet shower with CP flexible pipe up 15 mm bore with 1.00 m long Easy Flex tube in chrome finish with wall hook includng making connections and fixed in position, complete all as per specified and as directed by Engineer-in-charge. |
| 33 | S&F in repair chromium plated fancy type 15 mm bore stop cock/Angle stop cock cast copper alloy, with crutch or butterfly handle, screwed down, high pressure screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-charge. |
| 34 | S&F in repairs 15 mm bore Chromium plated fancy type bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge. |
| 35 | S&F in repair CP toilet paper roll holder including all necessary fittings fixed to wall, complete all as per specified and as directed by Engineer-in-charge. |
| 36 | S&F in repair brass CP Soap dish and fixed to plugs with chromium plated brass screws complete all as per specified and as directed by Engineer-in-charge. |
| 37 | S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge. |
| 38 | S&F in repair PVC connection 15mm dia size with PTMT nuts of length 450mm, complete all as specified and as directed by Engineer-in-charge. |
| 39 | S&F in repair 600mmX450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooded plugs with chromium plated brass screws and cup washers complete all as per specified and as directed by Engineer-in-charge. |
| 40 | S&F in repair vitreous china cistern mounted single piece EWC with UF soft close slim seat cover and connecting accessories 370X670X720mm in size, white in colour, including connection to drain (or outgoing pipe) and to flushing pipe, Anti-syphonage pipe, etc, and making good to floor/disturbed surfaces, complete all as per specified and as directed by Engineer-in-charge. |
| 41 | S&F in-repair High neck Single lever Basin mixture w/o popup waste mixer for mixing hot & cold water, 15mm bore (dia), Fancy type, brass chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as per specified and as directed by Engineer-in-charge. |
| 42 | S&F in repair Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as per specified and as directed by Engineer-in-charge. |
| 43 | S&F in repair PTMT cabinet mirror of size 400 X 500mm with screws and all necessary fittings fixed on walls, complete all as per specified and as directed by Engineer-in-charge. |
| 44 | S&F in repair 15 mm bore Wall Mixer with non-telephonic chromium plated cast copper, CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, complete all as per specified and as directed by Engineer-in-charge. |
| 45 | S&F in repair glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard & railing 60 cm long, complete all as per specified and as directed by Engineer-in-charge.Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ. Please Enable Macros to View BoQ information |
