|
| 1 | S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with beading/staples complete all as spcified and directed. |
| 2 | Hacking out old broken glass (any thickness, size, quality or description) from wooden, steel, aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as spcified and directed. |
| 3 | S & F in repair 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 4 | S & F in repair double legged door stopper of aluminium alloy body with rubber all as specified and directed. |
| 5 | S & F in repair Steel locking bolts with mild steel electro galvanised plate and bright bolt not less than 10mm dia 100mm size complete all as specified and directed. |
| 6 | S & F in repair 100 mm long mortice latch with two levers (vertical type), mild steel body complete all as specified and directed. |
| 7 | S & F radiant door bottom sealing strip guard for doors (door seal) complete all as all as specified and directed. |
| 8 | S & F in repair Aluminium body ISI marked Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed . |
| 9 | Taking down existing aluminium door shutter with frame area exceeding 1 Sqm but n exc 3sqm and re-fixing in same opening after repair/replace the defective jointing cleats/screws all as per specified and directed |
| 10 | S & F in repair 150mm aluminium handles, cast type anodised as directed |
| 11 | S & F in repair 200mm Aluminium anodised, barrel tower bolts of extruded section as directed |
| 12 | S & F in repair 150mm Aluminium anodised, barrel tower bolts of extruded section as directed |
| 13 | S&F in repair 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 14 | Dismantling of wall and ceiling boards, any thickness including cover fillets complete. |
| 15 | M & L for anodised aluminium snap grid frame work of size 600mm X 600mm for false ceiling incl hanging to plastered surfaces/iron framework using suspenders et complete all as specified and as directed. |
| 16 | S&F 4mm thick HSPC non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling. |
| 17 | S&F in repairs4mm thick HSPC non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling. |
| 18 | Taking down chowkhats or frames exc 1.5 Sqm and n exc 4sqm ( without taking shutters from the frame). |
| 19 | S&F Powder coated aluminium frame for Door, windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. |
| 20 | M&L poweder coated Anodised aluminium window and ventilator shutters, side hung / Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), tower bolt complete all as specified and directed |
| 21 | M&L poweder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, 2 no. sliding bolt in each door etc. complete all as specified and directed |
| 22 | S & F in 4.0 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 23 | M&L 6 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws/beading to timber/aluminium frame work or as required on site including fixing arrangement complete all as specified and directed |
| 24 | S&F galvanised stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples or screw complete all as specified and directed. |
| 25 | M&L for writing letters and figures (Block romon italic or indian) n exc 30 cm high on acrylic sheet of thickness min 3mm & size 300mm x 300mm fixed with screws complete one set at one place (min letters 03 Nos & max letters 12 Nos preferably base plate in black colour with letters embossed in golden colour) complete all as specified and directed. |
| 26 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 27 | S&F Solid PVC factory made Door shutter of 30mm (style) consisting of frame made out of MS tubes for top bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stilesa and plain coloured PVC sheets for top rail, lock & bottom rail on either sides & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement with including hinge , tower bolt and handles as pere specification and drawing complete all as specified and directed. |
| 28 | S & F aluminium handles, cast type, D shape anodised of size 150mm. |
| 29 | S&F 100 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed. |
| 30 | S & F 200 mm long aluminium anodised barrel tower bolt of extruded section complete. |
| 31 | S & F in repair 20mm bore cut to length as required stainless steel decorative draphery rods with brackets and decorative finails as required colour complete all as specified and directed. |
| 32 | NOTE :- FOR ATTANDING DAY TO DAY COMPLAIN ONE CARPENTER WITH HELPER EVERY DAY MUST BE DETAILED AND NO EXTRA PAYMENT SHALL BE CONSIDERED FOR THE SAME FOR ITEM NO. 01 TO 36. |
| 33 | S&F as in repair PVC connections 15mm size with PTMT nuts of length 600 mm all as specified and as directed. |
| 34 | S&F as in repair PVC connections 15mm size with PTMT nuts of length 900 mm all as specified and as directed. |
| 35 | S&F in repairs 15mm dia bore cast copper alloy chromium plated fancy type mixer pillar tap for cold & hot water complete all specified and as directed |
| 36 | S&F in repair PVC plain waste pipe size 32mm x 800mm flexible with coupling for WHB/urinal/sink etc. (not folding waste pipe) complete all as specified and directed |
| 37 | S&F in repair 15 mm dia two way angle valves/Bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions . |
| 38 | S &F as in repair chromium plated shower rose 125 mm dia with 600mm CP shower arm fancy type fixed to 15mm bore pipe all as specified and directed. |
| 39 | S & F as in repair of white soft closing seat cover for pedestal pattern water closet including fixing bolts complete. |
| 40 | S & F as in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed. |
| 41 | Supplying and laying as in repair of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed |
| 42 | Supplying and laying as in repair of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed . |
| 43 | S & F of 20mm dia Male Brass Threaded Adaptor (MTA/ MBTA) or Female Brass Threaded Adaptor (FTA/ FBTA) complete all as spcified and directed. |
| 44 | S & F of 25mm dia Male Brass Threaded Adaptor (MTA/ MBTA) or Female Brass Threaded Adaptor (FTA/ FBTA) complete all as spcified and directed. |
| 45 | S & F in repair 15mm stop valves cast copper alloy chromium plated fancy type concealed/open type screwed down high pressure with crutch or butterfly handle screwed down, high pressure with crutch screwed both ends for iron pipe or for unions and fixed in repairs all as specified and as directed. |
| 46 | S&F in repair white colour rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position including dismatling of water tank and necessary tank nipple connection and all other fitting required all as specified and directed by Engr-in-charge. (Note:- No any extra payment shall be deemed for any required fittings) |
| 47 | S & F in repair 15 mm dia bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 48 | S & F 25mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass/CPVC ferrule incl nipple connection/fittings to fixed the float valve complete all as spcified and directed. |
| 49 | S & F 20mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass/CPVC ferrule incl nipple connection/fittings to fixed the float valve complete all as spcified and directed. |
| 50 | S & F in repair mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 51 | S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed |
| 52 | S & F in repairs vitreous China wash basin, white, flat back, size 550 x 400 mm including a pair of bracket, 32mm dia CP waste and 15mm bore CP pillar tap screwed to iron pipe complete all as specified and directed. |
| 53 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as specified and directed. |
| 54 | S & F in repair vitreous China Urinal, Half stall type, white incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing of flush pipe, grating and union for discharge pipe complete all as spcified and directed. |
| 55 | S & F of PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with acess door complete all as spcified and directed. |
| 56 | S & F of PVC (SWR) junction single, (Single T) 75 mm bore equal or unequal with acess door complete all as spcified and directed. |
| 57 | NOTE :- FOR ATTANDING DAY TO DAY COMPLAIN ONE PLUMBER WITH HELPER EVERY DAY MUST BE DETAILED AND NO EXTRA PAYMENT SHALL BE CONSIDERED FOR THE SAME FOR ITEM NO. 38 TO 72. |
| 58 | M&L for cleaning and racking out the joint filling of floor or wall tiles and refilling the joints with white cement or colored cement to match the colour complete all as specified and directed |
| 59 | M & L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6 completed all as specified and directed. |
| 60 | M&L for vitrified Ceramic tiles light shed 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:6 completed all as specified and directed |
| 61 | All as per ser item No 70 above but as in vertical surfaces in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick completed all as specified and directed. |
| 62 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified andcompleted all as specified and directed |
| 63 | M&L for rendering 5mm thick in ceiling on brick work or concrete surfaces in CM 1:3, finished even and smooth without using extra cement all as specified and directed. |
| 64 | M&L for rendering 10mm thick internal surfaces on fair faces of brick work or concrete surfaces in CM 1:6 complete all as specified and directed. |
| 65 | M&L for rendering 15mm thick external surfaces on brick/concrete surfaces in CM 1:4 finished even and smooth without using extra cement with WPC 2% by wt of cement. Note:-WPC measured and paid separatly |
| 66 | M&L for applying 1.00 mm thick wall care putty incl preparation of newly plastered wall/ceiling surfaces complete all as specified and directed. |
| 67 | M&L for applying two coat of acrylic distemper over a coat of primer incl preparation of newly plastered wall/ceiling surfaces complete all as specified and directed. |
| 68 | M&L for two coats exterior emulsion paint over a coat of primer including preparation of newly plastered wall surfaces complete all as specified and directed. |
| 69 | Supply only liquid water proofing compound |
| 70 | M & L for preparation of old decorated surfaces including brooming down or steel wire brushing complete of walls and applying one coat of distempering with acrylic distemper as per manufacturer instruction white or tinted complete all as specified and directed. |
| 71 | M & L for applying two coat of solar reflective coated thermoplastic paint/(heat resisting paint) over surfaces of any description including preparation of surfaces etc complete. |
| 72 | M&L for repairing of RCC beam, column, facia etc at any height upto triple storey by demolition of damaged portion including scraping, cutting, cleaning exposed reinforcement and providing cement concrete (1:1.5:3) type A-1 using 12.5mm graded crushed stone aggregates and reinforced with welded mesh/Chicken wiremsh as per requirement and finishing the surfaces even and smooth with cement and sand mortar (1:3), 5 mm thick, the thickness of projection to be repaired shall be 70mm to 80mm including necessary formwork and finishing the surfaces to match with the existing complete all as specified and as directed |
| 73 | Cleaning of floor grating 75mm to 100mm dia and applying of white cement around the grating to fix it properly all as specified and directed |
| 74 | Supply only white cement in 1 Kg packing all as specified and directed |
| 75 | Removing building materials/debris etc to a distance exc 1 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination completed all as specified and directed |
| 76 | NOTE :- FOR ATTANDING DAY TO DAY COMPLAIN ONE MASON WITH HELPER EVERY DAY MUST BE DETAILED AND NO EXTRA PAYMENT SHALL BE CONSIDERED FOR THE SAME FOR ITEM NO. 74 TO 88. |
| 77 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 78 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 79 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 80 | Dismantling structural steel work including doors, gates, grills but excluding framed truss etc completed all as specified and directed |
| 81 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store measured overall as fixed along the centre line over fittings and accessories) completed all as specified and directed |
| 82 | M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 83 | M&L Brick work except Bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 84 | Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 85 | M&L for rendering 10mm thick in ceiling on brick work or concrete surfaces in CM 1:3, finished even and smooth without using extra cement all as specified and directed. |
| 86 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store measured overall as fixed along the centre line over fittings and accessories) completed all as specified and directed |
| 87 | M&L for rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC 2% by wt of cement. Note:-WPC measured and paid separatly |
| 88 | M & L for repair & rehabilitation of existing old damaged concrete surfaces of wall/ceiling of any description as follows :- (i) Chipped off the old damaged surfaces of structural member of wall/ceiling/columns /beams and remove the rust by passivating rust remover (Sika Rust off-100) and applying one coat of anti corrossive treatment by Zinc rich primer (Friazinc-R) (ii) application of two coat of Sika slurry coating/Bond coat on surfaces with mixer of Sika Latex power : Water : cement in the ratio of 1:4:8 as per manufacturer instruction. (iii) Repair the surfaces by Polymer mortar in ratio of Cement and Sand 1:4 and mixer of Sika latex power diluted in water with ratio of Sika latex power : water is 1:6 complete as per manufacturer instruction and making surfaces even and smooth without using extra cement complete all as specified. Note : (i) Work will be carried out in patches. |
| 89 | M & L for application of epoxy bonding primer for old to new concrete bonding (Sikadur-32 LP) as per manufacturer instruction complete all as specified and directed. |
| 90 | Supply only liquid water proofing compound ISI marked. |
| 91 | M&L for applying 0.50mm thick wall care putty incl preparation of newly plastered wall/ceiling surfaces |
| 92 | M&L for applying two coat of acrylic distemper over a coat of primer incl preparation of newly plastered wall surfaces. |
| 93 | M&L for applying two coat of acrylic distemper over a coat of primer incl preparation of newly plastered surfaces as in ceiling. |
| 94 | M&L for two coats cement base paint over a coat of primer including preparation of newly plastered wall surfaces completed all as specified and directed |
| 95 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in floor finishes laid in panels & finished even and smooth without using extra cement complete all as specified and directed. |
| 96 | M & L for Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate), 25 mm thick in flooring etc complete all specified and as directed |
| 97 | M & L for 8-10 mm thick dark shed parking tile (square/rectangular) area of each tile exc 0.09 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and directed |
| 98 | Sand filling under floors for cushioning of including watering and consolidation complete all as specified and directed |
| 99 | M & L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed |
| 100 | ditto- all as above item no 99 but except tile |
| 101 | M&L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in coping, benching, bed block, lintel band, drains and channels etc and similar work incl form work.complete all as specified and directed. |
| 102 | Dismantling floor, hearth or wall tilling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises. |
| 103 | M&L for granite (any type) work (table rubbed and polished) 15 to 18 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and as directed |
| 104 | M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana white type complete all as specified and as directed |
| 105 | M & L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 completed all as specified and directed |
| 106 | M&L for vitrified Ceramic tiles light shed 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:4 complete. |
| 107 | M & L for Glazed ceramic coloured tiles of size 350x 250x 7mm/ 450X 350X 7mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. over 10mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 108 | M & L Machine cut Kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 complete all as specified and directed. |
| 109 | M & L Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and incl 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete.(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) |
| 110 | S & F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed |
| 111 | M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces. |
| 112 | M & L for TMT bars 8 mm dia & over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia completed all as specified and directed |
| 113 | M&L for nominal mix RCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) in slabs, cantilever or supported on walls and small works like cubes etc. |
| 114 | S & F chicken wire mesh made out of low carbon wire 0.30mm thick, annealed, mesh size (dist between the faces of hexagon) 12 mm complete all as specified and directed. |
| 115 | M&L for preparation and filling of pitting/cracks (including V groove cutting of cracks/deepening) on surfaces with crack seal and finishing the surfaces as per existing treatment complete all as specified and directed. |
| 116 | Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each |
| 117 | Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exc 1.5 Sq mtr but not exceeding 4.0 Sq mtr each |
| 118 | S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 119 | S&F Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18mm completed all as specified and directed |
| 120 | S & F only 3 mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane |
| 121 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete. |
| 122 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed |
| 123 | S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed. |
| 124 | S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed. |
| 125 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed |
| 126 | PVC (SWR) vent cowl for 110 mm bore pipe |
| 127 | S&F in repair PVC floor trap size 75/100mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. Please Enable Macros to View BoQ information |
