|
| 1 | Civil Works |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 3 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Means |
| 4 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete in 1:4:8 in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushedsand VSI Grade) |
| 6 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 9 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. |
| 10 | Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter- to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 600 mm girth (Surface Width). |
| 11 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 12 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. |
| 13 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. |
| 14 | Providingdry/trap/granite/quartzite/gneissrubblestonesoling15cmto20cmthick including hand packing and compacting etc. complete. |
| 15 | Providinganderectingchainlinkfencing1.8M.heightwithG.I.chainlinkofsize40x40mm,14gaugethickandfixed600mmabovegroundlevelonverticalM.S.Pipeof40x40x1.2mmsize,@topBottomandMiddleincludindembeddedinC.C.blockof1:4:8mixofsize450x450x670mm.at2.4M.c/cwithironbar10mmdiaasholdfastincludingweldinglinkwithangleframeat2.4mc/cwithnutsandboltsandhorizontalM.S.Pipeattopandbottomofincluding3coats of oil painting etc. complete. (BDW/46.39/page number 372) |
| 16 | Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. |
| 17 | Providingflyashbrickmasonrywithconventional/I.S.typeflyashbricksinC.M.1:6infoundationandplinthincludingbailingoutwatermanuallystrikingjoints,rackingout joints watering and scaffolding etc. complete. |
| 18 | Providingflyashbrickmasonrywithconventional/I.S.typebricksincementmortar1:6insuperstructureincludingstrikingjoints,rakingoutjoints,wateringandscaffolding etc. Complete |
| 19 | Providingsandfacedplasterexternallyincementmortarusingapprovedscreenedsand,inallpositionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofingcompoundat1Kilogrampercementbagcuringthesamefornotlessthan2daysandkeepingthesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mmthickincementmortar1:4finishingthesurfacebytakingoutgrainsand curing for fourteen days scaffolding etc.complete. |
| 20 | Providinginternalcementplaster20mmthickinSinglecoatsincementmortar1:5withoutneerufinish,toconcrete,bricksurface,inallpositionsincluding scaffolding and curing etc. complete |
| 21 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. |
| 22 | Providing and fixing rolling shutter fabricated from steel laths of minimum thick ness 0.9 mm with lock plate of 3.15 mm thick ness reinforced with 35x35x5 mm angle section fitted withs liding bolts and hand les for both sides, deep M.S. channel section of depth and thicknessn ot less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S.Bracketplate 300x300x3.15 mm minimum size and shape with squarebar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade castiron or mildsteel and onecoat of redleadprimer etc. complete. (I.S.62481979)(Without mechanical gear) |
| 23 | Providingandapplyingplasticemulsionpaintofapprovedquality,colourandshadetonewsurfaceinthreecoatsincludingscaffolding,preparingthe surface. (excluding primer coat) etc. complete. |
| 24 | Providingandapplyingplasticemulsionpaintofapprovedquality,colourandshadetooldandnewsurfacesintwocoatsincludingscaffolding,preparingthesurface.(excludingtheprimercoat)etc.complete |
| 25 | Providingandfixinginposition.(asperI.S.1868/1982)Aluminiumslidingwindowoftwotrackswithrectangularpipehavingoveralldimension63.50x38.10x1.02mmatweight0.547Kilogram/OneRunningMetre.andwindowframebottomtracksection61.85x31.75x1.20mmatweight0.695Kilogram/OneRunningMetre.Topandsidetracksection61.85x31.75x1.30mmatweight0.659Kilogram/OneRunningMetre.Theshuttershouldbeofbearingbottom40x18x1.25mmatweight0.417Kilogram/OneRunningMetre.Interlockingsection40x18x1.10mmatweight0.469Kilogram/OneRunningMetre.Andhandlesection40x18x1.25mmatweight0.417Kilogram/OneRunningMetre.andtopsection40x18x1.25mmatweight0.417Kilogram/Runningmetre.AsperdetaileddrawingsandasdirectedbyEngineerinchargewithallnecessaryAluminiumsectionsfixturesandfasteningssuchasrollerbearinginnyloncastingandselflockingcatchfittedinverticalsectionofshutterincluding5mmthickplainglasswithallrequiredscrewsandnutsetc,complete.WithcolourAnodisingwith box. |
| 26 | Electric Work |
| 27 | Supplying, erecting & terminating FR XLPE insulated, galvanisedsteel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm.copper conductor complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specificationno. CB-LT/CU |
| 28 | Supplying, erecting & terminating FR XLPE insulated, galvanisedsteel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm.copper conductor complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specificationno. CB-LT/CU |
| 29 | Making trench of suitable width and depth in soft soil for layingprovided LT cable up to and including 3.5 core copper armoured 120 sq.mm complete as perspecification no. CW-EXN-CTR |
| 30 | Supplying & erecting mains PVC unarmoured cable 1100Voltgrade ISI mark 3 core / 2.5 sqmm stranded / solid coppercomplete erected on wall with duly painted G. I. Saddle @ 0.25 mC/C & rigidly grouted in the wall with the help of plated screws. |
| 31 | Supplying & erecting weatherproof powder coated distributionboard 4 way with 2 x 6/10 Amp S. P. M. C. B. with industrial twopin plug socket 10 A and 3 pin plug top 10 A with top covernecessary connection etc complete with approved make |
| 32 | Point wiring for light/bell/exhaust fan in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire,modular type switch, earthing and required accessories as per |
| 33 | Providing point wiring for street light with PVC unarmoured cable1100Volt grade ISI mark 3 core 1.5 sqmm stranded / solid coppererected on wall with G. I. Saddle duly painted @ 0,25 m C/C rigidlygrouted in the wall with the help of plated screw including 4” x 4”M. S. box 2 way with epoxy painting & inside 10 amp Nylonconnector strip for street light connection and flexible cable of 2mtrs. for street light |
| 34 | Supplying & erecting 10-12W, 230V integral type LED Lampsuitable for B-22/E-27 base. |
| 35 | Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-castaluminium housing, having system lumens output of Min. 4400 |
| 36 | Supplying and erecting street light Wall bracket made from 40mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as perspecification no. FG-BKT/WB |
| 37 | Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mmdia. G.l. Rod complete with all materials as per specification no.EA-EP |
| 38 | Supplying, erecting & marking DPMCB 6A to 32A, B- series (forlighting) in provided distribution board as per specification no.SW-SWR/MCB |
| 39 | Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used forfabrication of boxes panel boards etc. including cutting, bending,drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint |
| 40 | Supplying and erecting triple pole and neutral distribution board(TPNDB) surface/ flush mounted suitable for SPMCB of 12 wayson iron / GI frame (horizontal busbar type) as per specification no.SW-SWR/MCBDB |
| 41 | Supplying & erecting G.I. pipe ‘A’ class 75 mm dia. erected forenclosing XLPE armoured cable on wall/pole as per specificationno. CB-CE. |
| 42 | Supplying and laying (including excavation of suitable width &depth up to 90 cm) 75 mm outside dia. double wall corrugatedpipes (DWC) of HDPE for enclosing cable below ground/roadsurface, to required depth complete. |
| 43 | Supplying & erecting Siemens type brass cable glands for 3 to 4core 6 sq. mm. /2 to 4 core 10 sq. mm. for XLPE armoured cable asper specification No. CB-GL |
| 44 | Supplying shockproof type hand lamp with lamp holder, bulb/lamp 100 W guarded glass and 30 mtr. 3 core PVC flexible cordwith hand shield type 3 pin 6 Amp. Plug top. |
| 45 | Point wiring for independent plug in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 46 | Supplying and erecting modular type D.P. switch 32A withindicator, duly erected on provided plate and box with wiringconnections complete. |
| 47 | Supplying and erecting double pole metal clad switch with HC typefuse and neutral link 240V, 32A on iron / GI frame as perspecification no. SW-SWR/MDP |
| 48 | Royalty |
| 49 | Other Minral |
| 50 | Lab test |
| 51 | Sand- Fineness Modulus,silt and clay content |
| 52 | Aggregate/Crush material a) Carrying out water absorption b)specific gravity c) Impact Valued) Crushing Value |
| 53 | Cement- Cement- Standerd Consistency,fineness, , Setting Time (Initial And Final), compressive strenght, soundness |
| 54 | Concrete M10 Grade- Concrete cube Compressive Strength (set of 3 cubes) |
| 55 | Concrete M20 Grade- Mix design M20 with all tests on besic materials |
| 56 | Concrete M20 Grade- Concrete cube Compressive Strength (set of 3 cubes) |
| 57 | TMT steel bars- Steel - Tensile strength,Yield stress, ultimate tensile stress,%elongation, weight per running meter, Bend/Rebend test.(Set of 3 Bars) upto 16 mm (set of 3 bar) |
| 58 | Murum plasticity Index, fild density of compacted layer, proctor test |
| 59 | Bricks: Crushing Value, Absorption Value, Specific gravity |
| 60 | ESHS Plan Please Enable Macros to View BoQ information |
