|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.dsr 15.56 |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Erloineer-in-charge. 15.7.3 |
| 3 | Excavation in Foundation As Per DSR 2.6 |
| 4 | C.C.Work in base conc. Of CC road with (1:5:10) Cement, f-sand & 40 mm gauge brick Ballast 4 Including s/o all materials Labour, T&P etc. Required for proper completion of work. (SI.No. 274) |
| 5 | Brick work with common burnt clay F.P.S(non modular )bricks of class designation 7.5 in foundation and plinth in 1:6 (1 cement: 6 coarse sand) dsr 6.1.2 |
| 6 | mild steel or iron in plane work such as reinforced concrete si dsr 5.22A 4 |
| 7 | Brick work with common burnt clay F.P.S(non modular) bricks of class designation 7.5 in super 7 structure above plinth level up to floor V level in all shapes and size in 1:6 (1 cement: 6 coarse (sand) dsr 6.4.2 |
| 8 | Excavating supplying stacking and filling of the local earth (including royality by machanical transport upto a lead of 5 km dar 2.25(a) |
| 9 | RCC Work in wall (any thickness), including attached pilasters butteresses plinth and string 9 courses, fillets, columns, pillars piers etc 1:1.5:3 (1 cement:1.5 coarse sand and 20 mm rominal size derived from natural sources) dsr5.2.2 |
| 10 | RCC work in beam, suspended floors, roofs having slope upto 15% landing balconies, shelves, chajjas, lintels, band with 1:1.5.3 mix etc complete der 5.3 |
| 11 | 12 mm thick Plaster 1:6 Cement & Fine Sand dsr 13.1.2 |
| 12 | Finishing of wall textured exterior paint of required shade dsr 13.45.1 |
| 13 | Providing and Laying vitrified floor tiles in different size (thickness to be specified by the 14 manufacturer) with 20 mm thick cement mortar 1:4 cement and c sand Including grouting the etc complete dsr 11:41:2 |
| 14 | Providing and fixing 1st quality Ceramic gazed wall tiles conforming to IS. 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by ts Engineer-in-Charge, in skirting, risers of steps and dedos, over 12 mm mick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete DSR 8.31 |
| 15 | P/L CC 1:2:4 (cement,c-sand and graded stone ballast 20 mm nominal size) including supply of Lall material (27 b) |
| 16 | Providing and Foxing 1 mm thick mis sheet garrage door with frame 40x40x5 mm angle iron with fitting.all.complete si der 10.5.1 |
| 17 | Centering shuttering including strutting propping etc and removal from for dsr no 5.9.5 |
| 18 | Centering shuttering including strutting.propping etc and removal form for dsr 591 |
| 19 | Winng for twin control light point with 1.5 aq.mm FRLS PVC insulated copper conductor single cone cable in surface recessed steel conduit 2 way plano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc es required. Wiring for light point fan point exhaust fan point call bell point with 1.5 sq mm FRLS PVC Insulated copper conductor single core cable in surface recessed steel condult with modular switch, modular plate suitable Gl box and earthing the point with 15 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. DGR NO ELE 2022 1.2 |
| 20 | Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipes. having thermal stability for not & cold water supply, including all CPVC plain & brass threaded fittings and faxing the pipe with clamps at 100 mspacing. This includes janting of pipes & fittings with one step CPVC solvent cement and the cost of cutting chass and making good the same including testing of joints complete as per Grection of Engineer in Charge. 20 mm nominal dia pipes DSR 18.8.2 |
| 21 | Providing and mixing Chioninated Polyviny Chloride (CPVC) pipes, having thermal stability for hot & cold water supply Including all CPVC plain & 22 brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 100 mm pominal dia pipes DSR 18.9.9 |
| 22 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement 4 coarse sand) for stop cock, with C.I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:15.3 mix (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size), including 23 necessary excavation foundation concrete 1.5:10 (1 cement 5 fine sand 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sandi 12 mm thick, finished with a floating poat of neat cement complete as per standard design With common bunt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 18.32.1 |
| 23 | (Indian type W.C. pan) with 100 mm sand cast iron P or S trap. 10 litre low level white PVC. flushing cistem, including flush pipe, with manually controlled device (handle lever) conforming to 15 7231, with al fittings and fodures complete including cutting and making good the walls and floors wherever required: 17.11 White Vitreous china Onssa pattem Wc pan of size 500x440 mm with integral type foot rest DSR 17.1.1 |
| 24 | Providing and fhong white vitreous china pedestal type water closet (European type) with seat and list 10tre low level white vitreous china flushing catarn & C.P. fush bend with fittings & C brackets, 40 mm flush standard make and mosquop bend, overflow arrangement with specials of approved menimpal design prodttcoupling of app the wouts and flocini wherever required complete, including painting of fittinge and brackets, cutting and making good W.C. pan with 18t marked whine solid put sear and l-DSR 17.3.1 |
| 25 | Providing and twing wash basin with brackets. 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required -(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer - DSR 17.7A.a |
| 26 | Cistem with fittings for Waterless Urinal each dsr 7075 |
| 27 | Providing and song rectangular nigh density polyethylene water storage tank with cover, conforming to ISI: 12701, colour of opaque white oras approved by Engineer-in-charge. The rate Includes making necessary holes for inlet, outlet & over flow pipes. The base support Including fittings & fixtures for sank shall be paid separately DSR no 18.48A |
| 28 | Providing land fixing CP. brass long nose bib cock of approved quality 29 conforming to (& standards and weighing not less than 810 gms. 15 mm nominal bore DSR: 18.50.1 |
| 29 | S/F of sign board Please Enable Macros to View BoQ information |
