|
| 1 | Taking down copper/aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) etc and making good to disturbed surface complete all as specified and directed. |
| 2 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 3 | Taking down carefully copper/aluminium sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 4 | Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Gaya complete all as specified and directed. |
| 5 | Taking down existing old Extg unserviceable LT UG/ service cable of any description and size complete all as specified and directed. |
| 6 | M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including concealed PVC conduit of size 20/25mm ISI marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed following :- |
| 7 | (a) One light point controlled by one, one way switch 5 Amps |
| 8 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 9 | (c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 10 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 11 | Description all as per item No 5 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 12 | S & F for switch piano type single pole 5 amp, 230 Volts complete all as specified and directed. |
| 13 | S & F for switch piano type single pole 15 amp, 230 Volts complete all as specified and directed. |
| 14 | S & F for socket outlet 2-in-1, 5 pin, 5 amp, 230 Volts complete all as specified and directed. |
| 15 | S & F for socket outlet 2-in-1, 5 pin, 5/15 amp, 230 Volts complete all as specified and directed. |
| 16 | S & F for ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete. |
| 17 | S & F for stepped type electronic fan regulator flushType complete all as specified and directed. |
| 18 | S & F for lamp holder, PVC / Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed. |
| 19 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 20 | M & L for replacment of Sheet metal enclosure MCCB DBs, Triple pole & neutral 4 way with 200 Amp rated bus bar double door suitable for 01 No incoming MCCB of 125 Amp capacity and 12 Nos+ 12 Nos out going MCB SP complete all as specified and directed. : MCCB & MCB's are measured and paid in separate items and same complete all as specified and directed. |
| 21 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 22 | S & F for MCB Single pole and neutral rated capacity 40 to 63 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 23 | S & F for MCB Single pole rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 24 | S & F in replacement of MCCB 4 pole, 125 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed. |
| 25 | S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of complete all as specified and directed |
| 26 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 27 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed |
| 28 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 29 | Labour hanging only ceiling fan /Exhaust fan obtained from item No 4 above and connecting up including provision of 3 core PVC insulated PVC sheathed multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal and M & L for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed. |
| 30 | Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size complete all as specified and directed and including taking down existing cable any type. |
| 31 | (a) 3.5 core x 50 Sqmm |
| 32 | Excavation in trenches not exceeding 1.5 mtrs wide & not exceeding 1.5 mtr in depth in soft or loose soil & getting out complete all as per & directed. |
| 33 | Returning filling including spreading levelling watering & well Ramming in layers not Exc 25 cm complete all as specified& directed. |
| 34 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified& directed. |
| 35 | M&L for bricks common burnt sub class B designation for protection of cable complete all as specified and directed. |
| 36 | M&L for natural local river sand for cable protection.complete all as specified and directed. |
| 37 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 38 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 39 | M&L fly ash Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed. |
| 40 | M&L fly ash Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:6) complete all as specified and directed. |
| 41 | M & L for 18- 20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 42 | Dismantling Stone slabs and tiles of any description or thickness in floors & pointed in any Mortar all as specified and directed. |
| 43 | M & L for vitrified ceramic tiles double charge light shed of 7.5 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete all as specified and directed. |
| 44 | Taking down cement plaster any description on brick or stone walls etc including Removing of tree/plant girth not exc 15 cm from wall/roofing including removing all roots ,raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 45 | M &L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth (without using extra cement) using water proofing compound.as directed |
| 46 | M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth (without using extra cement). |
| 47 | M&L for rendering 10 mm thick in ceiling on brick work or concrete surfaces in CM 1:4, finished even and fair complete all as specified and directed. |
| 48 | M&L 40 mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in levelling coarse of roof/floor complete all as specified and directed. |
| 49 | M &L Glazed ceramic coloured tiles in vertical surface 450X 350 (7-8mm) thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 on fair face of brick work or concrete surfaces as backing for tiles.all as specified and directed |
| 50 | M & L coloured Non Skid ceramic coloured jointless tiles (square/rectangular) area of each tile exc 0.18 Sqm but not exc. 0.38 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6. |
| 51 | M&L for preparation of new plastered surfaces of wall and Priming with alkaliresistant paint and applying two coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed. |
| 52 | M&L for 1 mm thick of Birla white putty/JK white wall care putty on new plastered surfaces and making the surface uniform & smooth. |
| 53 | M&L for complete removal of existing treatment of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including washing down with water etc. applying two coats of oil bound distemper with roller over one coat of primer, complete all as specified and directed. |
| 54 | M&L for Preparation of old decorated surfaces of ceiling and applying one coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed. |
| 55 | M&L for Preparation of new decorated surfaces of ceiling and applying one coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed. |
| 56 | M&L for complete removal of existing treatment of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including washing down water etc. applying two coats of antifungal exterior paint (of shade/colour as directed by GE) over one coat of primer all as per manufacturerinstruction including necessary scaffoldings etc. complete all as specified and directed.Note:Application of new/old finishes to be carried out by authorised applicator. |
| 57 | S & F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 58 | S&F Powder coated aluminium partition, frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item.(ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 59 | S&F 4mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqm each pane complete all as specified and directed. |
| 60 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or fixing rubber gasket with aluminium frame in each pane |
| 61 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spfd and directed. |
| 62 | Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 including fittings on walls/ceiling or laying in floors incl chase cutting complete all as specified |
| 63 | S & F Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed |
| 64 | S & F of Male & Female Brass Threaded Adaptor (MFTA & MTA/ MBTA & MFBTA) complete all as specified |
| 65 | S&F of 25mm dia tank union cpvc complete all as spfd and directed. |
| 66 | S&F of 20mm dia brass elbow complete all as spfd and directed. |
| 67 | S&F of 20mm dia brass Tee complete all as spfd and directed. |
| 68 | S&F CPVC Gate Valve/tank union/Float valve fixed in pipe all as Specified and directed. |
| 69 | S&F in repair Aluminium body ISI marked Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed |
| 70 | S&F 125 mm long Stainless steel butt hinges with steel hinge pin etc. |
| 71 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 72 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed. |
| 73 | S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed. |
| 74 | S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed. |
| 75 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed |
| 76 | S&F PVC (SWR) vent cowl for 110 mm bore pipe |
| 77 | S&F PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement |
| 78 | S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position including Dismantling water tanks and removing to store all as specified and directed |
| 79 | S & F of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 80 | S&F 15 mm dia stop valves/angle valves/ cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. |
| 81 | S&F Towel Rail 600 mm long Stainless steel all as spfd and directed |
| 82 | S&F Towel Ring round Stainless steel All as spfd and directed |
| 83 | S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper including brackets or fixed to walls with anchor fastners all as specified and directed |
| 84 | Supply & fix in repair brass chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed |
| 85 | S & F as in repair of white seat cover for pedestal pattern water closet including fixing bolts complete all as specified and directed. |
| 86 | S &F as in repair chromium plated Shower rose 15 mm size, 125mm long with arms |
| 87 | S&F as in repair alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified. |
| 88 | S & F in Repair of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as specified and directed. |
| 89 | S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets |
| 90 | S&F as in repair 150mm long aluminium anodised barrel tower bolt complete. |
| 91 | S&F as in repair 200mm long aluminium anodised barrel tower bolt complete. |
| 92 | S&F 150mm long aluminium anodised handle cast type and fixed D Type |
| 93 | S&F 125mm long aluminium anodised handle cast type and fixed D Type |
| 94 | S&F vitreous china urinal, half stall type, white including CP coupling waste pipe white, flat back size 630x450mm excluiding taps, chain and plug including waste pipe, brackets, 32 mm dia CP coupling cutting for and pinning in ends for brackets or ercting stand complete all as specified and directed |
| 95 | S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 96 | S&F brass chromium plated Shelf glass/Corner self assembly with CP screws etc complete all as spd |
| 97 | S&F PVC connections 15mm size with PTMT nuts of length 450/600 mm all as specified and as directed. |
| 98 | M &L for Surface Preperation - Removal of all loose particles, dust,dirt,oil , grease,algae and fungus use wire mesh . Clean the surface and allow it to dry completely indetify and mark all visible cracks . Fill hairline cracks with smartC are crackseal . for wider cracks , use polymer modified mortar allow sufficient curing time as per product guidelines. Supply and application of smartcare PU infinia in three coats, with a minimum coverage of 1.8 kg / sqm, incorporating a fleece layer sandwiched between the first and second coats. the application is to be carried out over a surface primed with smartcare PU infinia primer , applied at a minimum coverage of 0.2 kg/sqm . The membrane exhibits the following properties elongation with fleece : 80% elongation without fleece : 400% crack bridging capability : upto 6.5 mm pull off strength : 1.5 mpa puncture resistance : greater than 200 N |
| 99 | M & L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate as in plinth protection and finishing surfaces even and smooth without using extra cement. |
| 100 | Taking down chowkhats for frames exc 1.5 Sqm but not exc 4.00 Sqm. |
| 101 | Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each |
| 102 | S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet rein forced with MS square tube etc. |
| 103 | S&F factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame |
| 104 | M&L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc. complete, all as specified. |
| 105 | M&L for pressed steel door frame size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified. |
| 106 | M&L for providing PCC 1:3:6, type C-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc. |
| 107 | M&L for 30 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sides including 5 mm thick edging/beading on exposed to view on sides & top complete all as specified and directed. |
| 108 | M & L RCC type B-1 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns, and in shelves including form work and the like complete all as specified and directed. |
| 109 | M & L for TMT bars 8 mm dia & over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 110 | S&F stainless steel draphery rod 25-28mm dia fancy type with brackets,decorative end caps coloured to match complete all as specified & directed |
| 111 | M&L For Chequered cement concrete tiles 20cm x 20cm x 25 mm thick, set, jointed and pointed in neat cement slurry incl 15mm thick screed bed in CM1:4 in floors with grey pigments cement and pigments. |
| 112 | M&L for voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as spfd and directed. |
| 113 | M&L for ATT Along the external wall below concrete or masonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as spfd and directed. |
| 114 | M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre tocentre and sealing the same Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. Please Enable Macros to View BoQ information |
