|
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.Note:- (i) In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder. |
| 2 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, supplying & fixing in opening as per specification.Note: The cost of fasteners (10mm dia, 100mm long, min 6 Nos.) shall be deemed included in quoted unit rates. |
| 3 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face & 5mm prelam PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 4 | M&L for Providing and fixing factory made uPVG white colour Sliding window, Area of Net wall opening not exceeding 2.00 sqm each, Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. and 5mm thick glazing with selected quality glass and gauging with Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories includes all other connected accessories complete all as specified and directed. |
| 5 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder |
| 6 | Taking down shutters of any description, area exc 1.00 sqm but n'exc 2.00 Sqm each a complete all as specified and directed. |
| 7 | S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc , one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 8 | S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 9 | S&F 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter, 30mm thick, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge.Note: stainless steel butt hinges and necessary S.S screws shall be paid separately |
| 10 | S&F 2nd class HW factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats complete all as specified and directed. |
| 11 | S&F stainless steel wire cloth, premium quality, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 12 | S&F 100mm long stainless steel premium quality butt hinges with stainless steel hinge pin and fixed, complete all as specified and directed. |
| 13 | S&F 150mm long stainless steel premium quality handle, fabricated type complete all as specified and directed. |
| 14 | S&F 200 mm long stainless steel premium quality barrel tower bolts complete all as specified and directed.. |
| 15 | S&F 300 mm long stainless steel premium quality barrel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed. |
| 16 | S&F 150 mm long door stopper made of stainless steel premium quality barrel body and tongue, fixed in door with stainless screws etc complete all as specified and directed. |
| 17 | M&L plain cement concrete cast in situ 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in copings ,hold fast, back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as specified and directed. |
| 18 | M&L for two coats of synthetic enamel painting over a coat of pink primer including preparation of new wooden surface over 10 cm width or girth complete all as specified and directed. |
| 19 | S&F in repair PVC Wall Lining consisting of 25mm thick insulated PVC Panels having expanded polystyrene (EPS) stuck to 2mm thick with wood grain printed PVC sheet duly fitted on PVC frame made of 35x5mm PVC fillets fixed properly in to wall as per manufacturer's instructions and all other accessories required to complete the job as per specifications, drawing, manufacturer's instructions to the e entire satisfaction of Engr-in-Charge. |
| 20 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed |
| 21 | S&F 10mm thick PVC insulation panels with EPS stuck to 1mm thick printed PVC sheet suitably placed in false ceiling including Aluminium snap grid with suitable hangers complete all as per manufacturer's instruction or as and directed by Engr-in-Charge |
| 22 | M&L for Putty/POP work in multi layer (total thickness not less than 10mm) as in plaster of Paris (gypsum board) false ceiling of any shape (Square/Circular/Semi circular etc), design and pattern as approved by Engr-in-Charge including required GI frame work and Fibre mesh/ reinforcement (Horizontal & Vertical) fixed properly with walls/ceiling as per manufacturer's instructions, finishing Putty/POP surface even and smooth, painting two or more coat with Premium quality plastic emulsion paint over one coat primer over smooth finish POP surface, making provn for spot lighting/ceiling light as required and all other accessories/fixture/ material required to complete the job in all respect as specified and directed by Engr-in-Charge.Note : (i) The work may be executed up to a height of 5.00 m above floor level.(ii) light fittings and wiring work shall be measured and paid separately. |
| 23 | S&F in repairs 40 mm wide neoprene / EPDM gasket / door seal etc complete all as specified and directed. |
| 24 | S&F 12mm thick Toughened glass as in ,Urinal partitions ,automatic doors and similar work including cutting to shape, drilling holes required. Complete all as specified and directed. |
| 25 | Dismantling of wrought iron or mild steel work of any description not otherwise complete all as specified and directed. |
| 26 | S&F mild steel rolled/hollow tube section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 (Gde E-165) complete all as specified and directed. |
| 27 | S&F pre-painted galvalume sheet 0.50 mm thick having aluminium zinc coating 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete, including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets complete all as specified and directed. |
| 28 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge covering/cladding to wall, fixed with self tapping screws including dismantling of Asbestos cement (corrugated, semi corrugated as on ridge, etc) sheets complete all as specified and directed. |
| 29 | Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 30 | M&L for 25mm thick PCC 1: 2: 4 type B-0 (using 12.5mm graded stone aggregate) etc on roof top as a levelling course / padding (avg thickness n;exc 40mm) to maintain the slope, finished the surfaces even and rough to receive the tiles complete all as specified and directed. |
| 31 | M&L for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base to floors or paving's or hard standing etc complete all as specified and directed |
| 32 | S&F 60mm thick, machine pressed rubber moulded, glossy coloured, precast concrete interlocking paver block any shape and size, M-35 grade of approved shade fixed with grey cement and pigments laid over 50mm thick sand cushion and filled with fine sand including dismantling existing paver blocks, any discretion, shape and size, laid bedded in any mortar complete all as specified and directed. |
| 33 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour/shade of tile over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed. |
| 34 | M&L for glazed ceramic coloured tiles of size 600x1200x 8 mm to 10mm thick on vertical surfaces over & including 10mm thick rendering in CM 1:4 and tiles fixed with costra tile adhesive cosmic silvwe type 1T (EN-STD C1TE) complete all as specified and directed. |
| 35 | M&L vitrified coloured tiles, 8-10mm thick (square/ rectangular), area of each tiles exc 0.42 sqm but n'exc 1.00Sqm as in floors etc,. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed layer in CM 1:6 complete all as specified. |
| 36 | All as per item No 35 herein before but on vertical surfaces over and including 10 mm thick plaster in CM 1:4 complete all as specified and as directed. |
| 37 | Taking up or down 15 mm dia bore steel tubing with connections incl cleaning for re-fixing or removal from site for complete all as specified & directed. |
| 38 | M&L for 20 mm outer dia CPVC pipes, SDR 11 grade (As per ASTM D2846 & IS15778.) including fittings, on walls/ceiling or laying in floors complete all as specified and directed.Note : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 39 | Taking up or down 20 mm dia bore steel tubing with connections incl cleaning for re-fixing or removal from site for complete all as specified & directed. |
| 40 | Re-fixing galvanised mild steel tubing 20 mm dia and connection in new or old position (wall, ceiling, floor etc) complete all as specified & directed.Note:-GI tubing obtained from Srl item No.39 above shall be re-used. |
| 41 | S&F 20mm dia bore GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 42 | S&F in repair counter top with cord board vitreous china wash hand basin, white coloured, including waste coupling ,waste pipe, pvc connections including dismantling / taking down existing WHB of any description complete all as specified and directed. . Make : Jaguar (Cat Part No LYS-WHT-3901N) /Cera(Cat part No S2020103)/ Johnson (Cat part No P73123PW0303)Note : Pillar tap and PVC connection will be measured paid separately. |
| 43 | S&F in repair Vitreous china single piece EWS with soft closing seat cover and health faucets along with 1.2m braided hose ‘P’ or ‘S’ traps connection to trap complete fixed including dismantling / taking down existing WC of any description, complete all as specified and directed.Make : Jaguar ( Cat Part No LYS-WHT-38853P180UFSM) /Cera(Cat part No S1013206)/ Johnson (Cat part No G3708PW0103) |
| 44 | S&F in repair Hand Shower (Health Faucet) with 8 mm dia, 1.25 meter long flexible tube & wall hook with CP chromium plated with check nut and washers complete all as specified. Make : Jaquar-Cat part No : ALD-BGP-573PD or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 45 | S&F 15mm bore dia CP Exposed part kit concealed stop cock & flush cock (Code : KUP-BGP-35083KPM) with fitting sleeve, Operating lever & Adjustable wall flange with seal, incl regular body of concealed stop cock (Code : ALD-CHR-083) suitable for 15 mm pipe line with protection cap complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 46 | S&F 15mm dia bib tap fancy type chromium plated, cast copper alloy, with wall flange, screwed for iron pipe including taking down existing bib tap of any description complete all as specified and directed.Make : Jaguar ( Cat Part No ARI-CHR-39037) /Cera(Cat part No F1005151)/ Johnson (Cat part No T3205C) |
| 47 | S&F in repair 15mm bore dia CP 2 way bib cock with wall flange with wall flange including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make :Jaquar Code: KUP-BGP-35041PM /Cera Code : F1021201RG/Kohler Code : K-16094IN-4-RGD |
| 48 | S&F Wall mixer 3-in-1, brass chromium plated, fancy type for mixing hot & cold water screwed down for 15mm bore iron pipe including taking down existing mixer /taps of any description complete all as specified and directed.Make : Jaguar ( Cat Part No ARI-CHR-39145) /Cera(Cat part No F1005424)/Johnson (Cat part No T3223C) |
| 49 | S&F WHB mixer, brass chromium plated, fancy type for mixing hot & cold water screwed down for 15mm bore iron pipe including taking down existing mixer / pillar tap of any description complete all as specified and directed.Make : Jaguar ( Cat Part No ARI-CHR-39005B) /Cera(Cat part No F1005451) /Johnson (Cat part No T3245C) |
| 50 | S&F 15mm dia angle cock fancy type chromium plated, cast copper alloy, with wall flange, screwed for iron pipe including taking down existing angle cock of any description complete all as specified and directed.Make : Jaguar ( Cat Part No ARI-CHR-39053) /Cera(Cat part No F1005201)/Johnson (Cat part No. T3210C) |
| 51 | S&F vitreous china squatting pan, Orissa pattern size 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete including taking down existing WC of any description and making good to floor, complete all as specified and directed. Make : Parryware ( Cat Part No C0117CS) /Cera(Cat part No S3010102)/ Johnson (Cat part No P0360PW0400#OP23ISI) |
| 52 | S&F over head rain shower with arm brass chromium plated, 150/200 mm in size including fixing to steel pipe including taking down existing shower rose and arm of any description complete all as specified and directed.Make : Jaguar ( Cat Part No.: Shower- F7010111SS, Arm -SHA-483)/Cera(Cat part No Shower- OHS-1667, Arm -F7040104)/Johnson (Cat part No Shower-S1740C, Arm -S0001C5) |
| 53 | M&L for preparation of old surfaces of wall by complete removal of existing treatment, exposing crack 9if any) in 'V' shape and filling with crakes seal, applying wall care white putty in two layers (1mm thick each layers) for levelling the surfaces and applying two coat of premium quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved make & brand in required shade and colour complete all as specified and directed. |
| 54 | Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed. |
| 55 | Taking down carefully copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. |
| 56 | Taking down main switch, DB/Change over/VTPN, AC box from wall/ wooden board etc , any description and any capacity with MCB(s) / MCCB(s) including disconnection of electric connections complete all as specified and directed |
| 57 | M&L for surface casing-n-caping/ conduit point wiring for one light point or fan/exhaust point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor (stranded) 1100 volt wiring cable in & including ISI marked PVC casing-n-caping / conduit of size not less than 20mm, ivory/white in colour with all accessories (such as tee, bend, joint cover etc) including suitable size anodized MS sunken box made of 1.6mm thick MS sheet with earth dolly and 3mm thick PVC laminated ISI marked sheet (hylem/Ancher) for mounting of switches/sockets/ regulator etc and continuous earth lead cable wire of similar description of wiring cable complete all as specified and directed. Note:-(i) Wiring cable shall be provided using colour coding such as Phase - Red, Neutral – Black, and Earth – Green or as approved by Engr-in-charge . |
| 58 | All as per item No. 57 above but point wiring for one 5 Amp socket point on independent board controlled by one switch and with 2.5 Sqmm wiring cable. |
| 59 | All as per item No. 57 above but point wiring for one 3 pin ,5 Amp socket point on the same board with other switch and 2.5sqmm wiring cable. |
| 60 | All as per item No. 57 above but point wiring for 15/16A socket outlet with 2.5 Sqmm wiring cable. |
| 61 | M&L for concealed point wiring for one light point or fan/exhaust point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor (stranded) 1100 volt wiring cable in & including ISI marked PVC conduit of size not less than 20mm, ivory/white in colour with all accessories (such as tee, bend, joint cover etc) including suitable size modular metal boxes with cover plate along with frame for mounting of switches/sockets/ regulator etc and continuous earth lead cable wire of similar description of wiring cable complete all as specified and directed. Note:-(i) Wiring cable shall be provided using colour coding such as Phase - Red, Neutral – Black, and Earth – Green or as approved by Engr-in-charge .(ii) Cutting, chasing in walls (brick or stone) shall be measured and paid separately under respective item here-in-before. |
| 62 | All as per item No. 61 above but point wiring for one 5 Amp socket point on independent board controlled by one switch and with 2.5 Sqmm wiring cable. |
| 63 | All as per item No. 61 above but point wiring for one 3 pin ,5 Amp socket point on the same board with other switch and 2.5sqmm wiring cable. |
| 64 | All as per item No. 61 above but point wiring for 15/16A socket outlet with 2.5 Sqmm wiring cable. |
| 65 | S&F Modular switch, one way, 5/6 Amp 230, 1 module complete all as specified and directed. |
| 66 | S&F Modular socket outlet, 5/6 Amp-2/3 pin combined, 2 module complete all as specified and directed. |
| 67 | S&F switch Modular, single pole, one way,15/16 Amp ,1 module 230 Volt complete all as specified and directed. |
| 68 | S&F socket outlet modular 15/16 Amp, 5/6 pin combined ,2 module 230 Volt complete all as specified and directed. |
| 69 | S&F modular fan step regulator 60/80W, 2 module complete all as specified and directed. |
| 70 | S&F switch piano, flush type, single pole, one way, 5 Amp 230 complete all as specified and directed. |
| 71 | S&F socket outlet, 5 Amp-5 pin, flush type, 230 Volt complete all as specified and directed. |
| 72 | S&F switch piano, flush type, single pole, one way, 15 Amp 230 Volt complete all as specified and directed. |
| 73 | S&F socket outlet 2 in 1, 6 pin, 5/15 Amp, flush piano type 230 Volt complete all as specified and directed. |
| 74 | S&F ceiling rose, surface backlite, three terminal complete all as specified and directed. |
| 75 | S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 76 | S&F electronic double space rotary, 5 speed type fan step regulator 120-280 V complete all as specified and directed. |
| 77 | M&L concealed sub main wiring with two single core 6.0 Sqmm PVC FRLSH insulated unsheathed stranded copper cable (Phase & neutral) and one single core cable of same description as continuous earth wire, drawn in & incl medium grade, ISI marked PVC conduit of suitable size (not less than 20mm dia) with all accessories (such as tee, bend, joint cover, round / square blocks at junctions as required) complete all as specified and directed.Note: (i) The cost of cutting chaging pinning for concealed PVC conduit, making good in CM 1:3 and painting so as to match with the adjoining existing surface finish shall be measured and paid separately under respective item of BOQ in this contract)(ii) Proper colour coding of wiring cables (as approved by Engg-in-charge) shall be used/ ensured(iii) Two runs of single core cable (Phase and neutral) and one run of single core cable (earth continuity conductor) & one run of PVC casing -n-caping/pvc conduit shall be measured as one unit length. |
| 78 | S&F MCB SP 240 volt 6 Amp to 32 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 79 | S&F MCB SPN 240 volt 40 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 80 | S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 8 way, 240 V with 120-160 Amps rated bus bar of suitable size, including taking down existing DB with MCB and bus bars complete all as specified and as directed. |
| 81 | S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 4 way, 240 V with 120-160 Amps rated bus bar of suitable size, including taking down existing DB with MCB and bus bars complete all as specified and as directed. |
| 82 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver, holder & connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make : Havells - cat no RUGBYGENXFTS10WLED865SSYMBOPC / Bajaj - BIBWP10WLED /Orient - LIBHP-10-C |
| 83 | S&F Tube light fitting 20/18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directedMake : Havells - Cat no LHEXAPP7PN1W020/ Bajaj - Beam Pro Batten 830412 Philips -Ujjwal/ slimline Batten 919515814053/ Orient - LBLN -18-C-SQ |
| 84 | S&F box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed.Make : Havells - Cat Part No LHEXBLP7IN1W009 or eqvt in bajaj cat part No BCLSB10WH/ CG Cat Part No LCTL-9-CDL |
| 85 | S&F in repair socket outlet multipurpose 5/3 pin 5/15 Amp, combination flush piano type 230 Volt complete all as specified and directed. |
| 86 | S&F in replair modular sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin and earth plug and socket, and one No MCB, SP, 20 Amps, 230 Volts, 10KA 'C' series, flush mounting complete complete all as specified and directed. |
| 87 | S&F in repair new laminated super hylem sheet of size 5\\" x 5\\", any colour, 3mm thick including cutting holes for fixing of switches, sockets as per existing pattern complete all as specified and directed. |
| 88 | S&F in repair new laminated super hylem sheet of size 8\\" x 10\\", any colour, 3mm thick including cutting holes for fixing of switches, sockets as per existing pattern complete all as specified and directed. |
| 89 | S&F in repair new laminated super hylem sheet of size 8\\" x 12\\", any colour, 3mm thick including cutting holes for fixing of switches, sockets as per existing pattern complete all as specified and directed. |
| 90 | S&F in repair new laminated super hylem sheet of size 9\\" x 11\\", any colour, 3mm thick including cutting holes for fixing of switches, sockets as per existing pattern complete all as specified and directed. |
| 91 | S&F in repair PVC conduit, 20mm dia, medium grade, ISI marked PVC conduit with all accessories (such as tee, bend, joint cover, round / square blocks at junctions as required), fixed on wall/ceiling with suitable clamp/saddles complete all as specified and directed. |
| 92 | S&F in repair PVC casings & capings of size 1\\" x 1/2\\", medium grade, ISI marked PVC conduit with all accessories (such as tee, bend, joint cover, round / square blocks at junctions as required), fixed on wall/ceiling with suitable clamp/saddles complete all as specified and directed. Please Enable Macros to View BoQ information |
