|
| 1 | Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge. |
| 2 | Filling Foundation and Plinth with good coarse river sand in layers etc complete. |
| 3 | Cement concrete in cm (1:3:6) using 4cm size H.G. metal with all cost conveyancy Royality etc. complete. |
| 4 | Cement concrete in cm (1:2:4) using 12mm size H.G. chips with all cost conveyancy Royality etc. complete. |
| 5 | Brickwork with Cement Flyash Bricks in cement mortar (1:6) in Foundation and Plinth etc. complete. |
| 6 | Reinforced Cement concrete M20 using 12mm size h.g.c.b. chips with all cost, carriage, royality etc. complete.Column Base/Plinth Band (Ground floor) |
| 7 | Gradebeam(Ground floor) |
| 8 | Column & Beam (Ground floor) |
| 9 | Column & Beam (1st floor) |
| 10 | Column (2nd floor) |
| 11 | Roof Beam (Ground floor) |
| 12 | Roof Beam(1st floor) |
| 13 | Roof Beam (2nd floor) |
| 14 | Lintel (Ground floor) |
| 15 | Lintel (1st floor) |
| 16 | Chajja (Ground floor) |
| 17 | Chajja(1st floor) |
| 18 | Chajja (2nd floor) |
| 19 | Selves (Ground floor) |
| 20 | selves(1st floor) |
| 21 | Window Sill (Ground floor) |
| 22 | Window Sill(1st floor) |
| 23 | Stair case (Ground floor) |
| 24 | Stair case(1st floor) |
| 25 | Roof Slab (Ground floor) |
| 26 | Roof Slab(1st floor) |
| 27 | Roof Slab (2nd floor) |
| 28 | Labour for cutting, bending, binding M.S. Rod and place in position including cost of M.S,Rod etc. complete. |
| 29 | 1st floor |
| 30 | 2nd floor |
| 31 | Fly Ash Bricks masonary in cm (1:6) in Superstructure with all cost, carriage,royality etc. complete. |
| 32 | 1st floor |
| 33 | 2nd floor |
| 34 | 12 mm thick Cement Plaster in CM (1:4) with neat cement punning for Skirting etc complete, |
| 35 | 12 mm thick Cement Plaster in CM (1:6) to even surface of brick walls etc all complete. |
| 36 | 1st floor |
| 37 | 2nd floor |
| 38 | 16 mm thick Cement Plaster in CM (1:6) to uneven surface of brick walls etc all complete. |
| 39 | 1st floor |
| 40 | 2nd floor |
| 41 | 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment |
| 42 | 1st floor |
| 43 | 2nd floor |
| 44 | Supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm of colour/printed approved make conforming to IS: 13755 laid to 20mm thick cement mortar(1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. ( For New work Only) |
| 45 | 1st floor |
| 46 | Fixing glazzed wall tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 47 | Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 48 | 1st floor |
| 49 | 2nd floor |
| 50 | Supplying,fitting and fixing of M.S. iron Door,window , grill & grill gate made out of (45x45x60)mm size angular frame with square bar M.S. flat for grills of approved design icluding all cost conveyance taxes etc. complete.(prevaling lowest local market rate and excluding labour for fixing ) as per direction of Engineer In Charge.(i)Doors (Ground floor) |
| 51 | (ii) Window (Ground floor) |
| 52 | (iii)Ventilators (Ground floor) |
| 53 | (i)Doors (1st floor) |
| 54 | (ii) Window (1st floor) |
| 55 | (iii)Ventilators (1st floor) |
| 56 | Doors( 2nd floor) |
| 57 | Ventilators(2nd floor) |
| 58 | Dressed seasoned Nonsalwood work framed and fixed in trusses,purlins, door, window, ventilaters and beams. |
| 59 | 1st floor |
| 60 | Providing and Fixing ISI marked 32mm thick flush door shutters conforming to IS : 2202 (part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete |
| 61 | 1st floor |
| 62 | Supplying, fitting, fixing up window (sliding type) made up aluminium section 9778 as window frame Section No.4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as pannel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes of labour, T&P etc. complete asper direction of E.I.C |
| 63 | 1st floor |
| 64 | Painting two coats with Enamel paint over a coat of primer Iron Work etc complete. |
| 65 | 1st floor |
| 66 | 2nd floor |
| 67 | Finishing wall surface with wall putty (water based) of approved make and finish smooth and even surface to receive painting including cost of all materials labour T&P etc complete. |
| 68 | 1st floor |
| 69 | 2nd floor |
| 70 | Painting two coats with Plastic Emulsion paint over a coat of primer over a coat of putty to inside surfaces etc complete. |
| 71 | 1st floor |
| 72 | 2nd floor |
| 73 | Finishing wall surface with two coats of approved quality of weather seal coat of approved shade over a coat of primer including cost of all materials etc.complete. |
| 74 | 1st floor |
| 75 | 2nd floor |
| 76 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. |
| 77 | Branding for HWC as per specification in outer plaster surface including all complete |
| 78 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group A |
| 79 | -do- Group B |
| 80 | -do- Group C |
| 81 | Recessed wiring to Fan Point in... -do- Group B |
| 82 | Recessed wiring to Call Bell Point in... -do- Group C |
| 83 | Recessed wiring to Exhaust Fan Point in -do- Group B |
| 84 | S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 85 | S/F of Angle holder replacing Ceilling Rose |
| 86 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board |
| 87 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 88 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 89 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type socket, 32A Modular Starter switch & Mini DP MCB, connection, painting etc as required for AC |
| 90 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. |
| 91 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection |
| 92 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover |
| 93 | 4 Modular box with base & cover |
| 94 | 6 Modular box with base & cover |
| 95 | 8 Modular box with base & cover |
| 96 | 12 Modular box with base & cover |
| 97 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1) |
| 98 | 2x2.5+1x1.5 (1.8.2) |
| 99 | 2x4+1x1.5 (1.8.3) |
| 100 | 2x6+1x2.5 (1.8.4) |
| 101 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 102 | S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 103 | S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the 2 Way double door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b) |
| 104 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of SP MCB 16 way double Door (2.3.8 ) |
| 105 | S/F of MCB 12 way Double door (2.3.7) |
| 106 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 107 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 108 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 109 | Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31) |
| 110 | Supply and fixing of 225 mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB ) |
| 111 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 112 | S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab) |
| 113 | Supply and fixing of 1200mm A.C. Ceiling fan (1 star) with all accessories and connections with out fan regulator (Make:Usha-Striker neo HS/Crompton- Highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White - Aldous/ Pollycab - Vital HS ) |
| 114 | S/F step type modular fan regulator |
| 115 | Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval type including necessary connections. ( M-5 ) |
| 116 | Supply and fixing of 30-35 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 117 | Supply and fixing of 45-48 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 118 | S/F of 10w Watt LED Bulb |
| 119 | S/F of 15w Watt LED Bulb |
| 120 | Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. (a) 1st depth- |
| 121 | 2nd depth- |
| 122 | Supplying all materials,labour,T&P and filling in F&p with river sand well watered and rammed including conveyance of all materials to worksite,payment of royalty,taxes etc.all complete as per direction of E.I.C. (a) Ground Floor |
| 123 | First Floor |
| 124 | Supplying all materials,labour,T&P and providing cc(1:3:6)with 40mm HG metal including watering, curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C. |
| 125 | Supplying all materials,labour, T&P and providing PCC(1:1.5:3) with 12mm size HBG chips including watering,curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C. |
| 126 | Supplying all materials,labour,T&P and providing brickwork with KB brick having crushing strength not less than 75kg/cm2 with dimensional tolerence of +/-8%in cm(1:4) including watering, curring, conveyance of all materials to work site,payment of royalty, taxes etc all complete as per P.H specification and direction of E.I.C. |
| 127 | Supplying all materials,labour,T&P and providing 12mm thick CP(1:3)on brick work with punning for skirting including watering,curing,conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 128 | Supplying all materials,labour,T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including conveyance of all materials to work site, payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 129 | Supplying all materials, labour, T&P and providing MS reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 130 | Supplying all materials,labour,T&P and providing RCC (1:1:5:3) with 12mm size HG chips for RCC works including hoisting, laying, watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C |
| 131 | Supplying all labour T&P and making m.s step iron in 20mm dia m.s steel bar and fixing into walls of MH/ Septic tank dullyembedded as per direction of E.I.C. |
| 132 | Supplying all labour T&P and providing 50mm thick pre cast RCC baffle walls in cc(1:1.5:3)with 12mm size bhg chips fitted and fixed in position and finished smooth etc all complete as per direction of E.I.C. |
| 133 | Supplying all materials,labour,T&P and providing cement flush pointing (1:3)to brick masonry including watering, curing, conveyance of all materialsto worksite payment of royalty taxes etc all complete as per specification and direction of E.I.C. |
| 134 | Filling in F&P with excavated materials,including watering and ramming as per the direction of the E.I.C. |
| 135 | Supplying all materials,labour,T&P and providing 550x550x100mm thick RCC precast MH cover in cc(1:1.5 :3)using 12mm size hbg chips,placing the cover on the MH/S.Tank & finishing smooth etc all complete including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per the specification and direction of E.I.C. |
| 136 | Supplying all materials,labour,T&P and providing CC(1:2:4)with 12mm size and HBG chips including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. (a) Ground Floor |
| 137 | First Floor |
| 138 | Supplying all materials,labour,T&P and fixing ceramic tiles/marble tiles/chequered tile in floors, treads and landing on 25mm thick bed of cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the specification and direction of E.I.C. (a) Ground Floor |
| 139 | First Floor |
| 140 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles/marble tiles/kota tiles/ kodappa tiles on 12mm thick CP(1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the direction of EIC. (a) Ground Floor |
| 141 | First Floor |
| 142 | Supplying all labour materials T&P fitting fixing of AL. door frame with OEL Anodized Al. Door section of 9202 as vertcal member,9201 as top member and 9200 as bottom and middle member and 12 mm thick pre-laminated board in bottom portion fixed on door frame by meams of tapered clip NO-4660 and the frame by means of jointing angle NO-185 including all cost of labour ,T&P ,hire charges of drilling machine ,labour etc all complete as per the dir of EIC |
| 143 | Supplying all materials,labour,T&P and fitting & fixing of U-PVC SWR soil waste ventilating pipes & fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C. (a) 110mm dia PVC pipe |
| 144 | 110mm dia PVC'P' trap |
| 145 | 110mm dia.PVC S/J/D |
| 146 | 110mm dia.PVC D/J/D |
| 147 | 110mm dia.PVC Door Bend |
| 148 | 110mm dia PVC Plain Bend |
| 149 | 110mm dia PVC offset |
| 150 | 110mm dia PVC Y Tee |
| 151 | 110mm dia PVC Cowl |
| 152 | 75mm dia PVC pipe |
| 153 | 75mm dia.PVC Door Bend |
| 154 | 75mm dia PVC Plain Bend |
| 155 | 75mm dia PVC Tee |
| 156 | 75mm dia.PVC Door Tee |
| 157 | 75mm dia.PVC Y Tee |
| 158 | 75mm dia PVC offset |
| 159 | 125mm dia CP greatings |
| 160 | Supplying all materials,labour,T&P and cutting holes through brick/stone masonry walls for taking PVC pipes and fittings including making good the damages etc. all complete as per the P.H. specification and direction of E.I.C. (a) 250mm to 375mm thick wall |
| 161 | Roof cutting |
| 162 | Supplying all materials,labour,T&P for fixings water closet, squatting pan (I.W.C pan/Orissa pattern squatting pan)dully embedded in CC(1:5:10) using 4cm h.g. metal all complete as per the direction of E.I.C. (Hindware/Parryware/Cera/Equivalent) (a) 580mm Orissa Pan(White) |
| 163 | Supplying all materials,labour T&P and fixing wash down water closet(E.W.C) of ISI mark of with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent) |
| 164 | Supplying all materials,labour,T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent) |
| 165 | Supplying all materials,labour,T&P and fixing wash basin of ISI mark of with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C . (Hindware/Parryware/Cera/Equivalent) (a) 550mmx400mm size WHB |
| 166 | Pedestrial for WHB |
| 167 | Supplying all labour,T&P,materials & fixing Wash Kitcken Sink with C.I/MS Brackets painted white including holes in walls and making good the damages etc. all complete as per PH specification and direction of E.I.C. (a) 450mmx400mmx200mm size |
| 168 | Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3: 6)using 40mm size HG metal on bed,1st class K.B brickwork in cm(1:6), moulding & shapping the channel inside&benching with cc(1:1.5:3)using 12mm size HG chips,12mm thick cp(1:3) with punning to inside, cement flush pointing(1:3)to outside,RCC coverslab in cc(1;1.5:3) using 12mm size HG chips with RCC MH cover in excavation in all kinds of soil & refilling the cavity around the chamber including watering,curing, conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per approved specification & direction of the E.I.C. Size (760mmx760mmx460mm) |
| 169 | Supplying all materials,labour,T&P and laying of 110mm dia. PVC pipes,in trenches(to level or slope) and jointing with supply of approved rubber lubricant by nonheat application method using 40mm bhg metals on bed of the trenchand hunching or allround concrete encasing with cc(1:4:8)using 40mm size h.g metal including curing,conveyance of all materials to worksite,payment of royalty,taxes etc.and testing all complete as per approved drawing,design,specification and direction of E.I.C. (A)110mm dia PVC pipe with allround encasing |
| 170 | Supplying all material,labour,T&P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brickwork in cm(1:6)for the remaining height at top, 12mm thick CP(1:4)inside and outside over masonary brickwork gravel packing in the rear of well steining, RCC coverslab in cc(1:1.5:3)using 12mm size h.g chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron wirk, watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc. all complete as per approved drawing,specification and direction of E.I.C. (a) 1.20m dia x 2.00m deep Inside Size |
| 171 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravel backing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. (a) 1.20m dia x 1.80m deep RCC Ring Soak Pit |
| 172 | Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (A) 1000 lits capacity on the roof of ground floor |
| 173 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (A) 1000 lits capacity on the roof of ground floor |
| 174 | Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80) and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C. (a) 25mm dia PVC PVC Pipe (Internal) |
| 175 | 32mm dia (ASTM )PVC Pipe |
| 176 | 15mm dia PVC inlet Connection Pipe |
| 177 | 32mm dia PVC Waste Pipe |
| 178 | Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C. |
| 179 | Supplying all materials,labour,T&P and cutting holes in RCC,floors,roofs etc. upto 19cm thick for passing G.I/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C. |
| 180 | Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.a)upto 300mm wide |
| 181 | Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C. (Plaza/Amber).15mm dia C.P Bib Cock(L.B) |
| 182 | 15mm dia C.P Bib Cock(S.B) |
| 183 | 15mm dia C.P Twin Bib cock |
| 184 | 15mm dia C.P Health Fuccet |
| 185 | 15mm dia C.P Pillar cock Elbow Action |
| 186 | 15mm dia Angle Stop Cock |
| 187 | 15mm dia Concealed Stop Cock |
| 188 | 15mm dia CP Flange |
| 189 | 15mm dia CP Extension Piece |
| 190 | 32mm dia PVC Ball valve |
| 191 | Supplying all materials,labour,T&P and fitting and fixing 10Ltrs capacity PVC low level flushing cistern with a pair of C.I/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size Brass/PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet,overflow pipes,32mm dia PVC flush bend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent) (a) 10 lit PVC L/L Cistern |
| 192 | Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. 600mmx450mm size (fixed type) |
| 193 | Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C. |
| 194 | Glass self |
| 195 | Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C. (a) 20mmx450mm long CP towel rail |
| 196 | CP towel ring |
| 197 | Supplying all materials,labour,T&P and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of E.I.C. (a) 15mmx100mmlong Please Enable Macros to View BoQ information |
