|
| 1 | Revamping of purification tower heaters by replacing existing heaters with new 3 kW ceramic band heaters and replacement of 1 kW cartridge heater along with heater control panel as per the specification |
| 2 | Fabrication, Supply, installation along with performance testing of N Type multipoint thermocouple as per the specifications |
| 3 | Fabrication, Supply and installation of 2kW multi heat zone cartridge heaters as per the specifications |
| 4 | Augmentation of Class-II system of 10 kVA capacity to 20 kVA along with installation of power distribution system with supply and installation of FlexyDB of 2 row 14 modules, cable end box as per the specifications |
| 5 | Revamping of Class-II system by replacing with 10 kVA capacity and establishment of class-II distribution network with installation of 18 WAY SPN DB , cable end box as per the specifications |
| 6 | Revamping of Diesel tank level measurement system by replacing the existing resistance type sensor to ultrasonic sensor and installation of display unit at control room as per the specification |
| 7 | Fabrication and supply of power socket board with timer as per the specification |
| 8 | Wiring of power points from MCB DB to load including supply of 1.5 Sqmm wire as per the specification |
| 9 | Wiring of power points from MCB DB to load including supply of 2.5 Sqmm wire as per the specification |
| 10 | Wiring of power points from MCB DB to load including supply of 4 Sqmm wire as per the specification |
| 11 | Laying and termination of cables from distribution panel/MCB board to loads including supply of 2CX1 Sqmm cable as per the specification |
| 12 | Laying and termination of cables from distribution panel/MCB board to loads including supply of 3CX2.5 Sqmm cable as per the specification |
| 13 | Laying and termination of cables from distribution panel/MCB board to loads including supply of 4CX1.5 Sqmm cable as per the specification |
| 14 | Laying and termination of cables from distribution panel/MCB board to loads including supply of 4CX2.5 Sqmm cable as per the specification |
| 15 | Laying and termination of cables from distribution panel/MCB board to loads including supply of 5CX4 Sqmm cable as per the specification |
| 16 | Laying and termination of cables from distribution panel/MCB board to loads including supply of 5CX6 Sqmm cable as per the specification |
| 17 | Fabrication and supply of SS banana connector box with banana connector plugs as per the specification |
| 18 | Installation testing and commissioning of the following MCB on Distribution Boards with supply of MCB as per the specification |
| 19 | 16-32 Amps SP MCB (Type-C) |
| 20 | 6-32 Amps DP MCB (TYPE-C) |
| 21 | Installation & testing of MPCB in sheet steel enclosure with supply as per the specification |
| 22 | 3 Ph MPCB for 3 HP motor, O/L range 4.00 - 6.30 A, Icu 100kA, with UV release in sheet steel enclosure on external surfaces |
| 23 | 3 Ph MPCB for 3 HP motor, O/L range 1.00 - 4.0 A, Icu 100kA, with UV release in sheet steel enclosure on external surfaces Please Enable Macros to View BoQ information |
