|
| 1 | Schedule 'A' |
| 2 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and as directed. |
| 3 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 4 | Excavating in trenches, n exc 1.5 m wide and exc 1.5 m but not exc 3.00 in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 5 | Excavation over areas not exc 1.5m deep and getting out in soft and loose soil and removing the excavated material/soil upto a distance of 50m complete all as specified and directed. |
| 6 | Excavation over areas not exc 1.5m deep and getting out in hard and dense soil and removing the excavated material/soil upto a distance of 50m complete all as specified and directed. |
| 7 | M & L for PCC 1:4:8 Type D2 (Nominal mix) (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed.(Note:- using dimapur sand) |
| 8 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed. |
| 9 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finised flat surfaces of concrete complete all as specified and directed. |
| 10 | M&L for RCC M25 (Design Mix) as in foundation incl raft, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles & mass concrete complete all as specified and directed by Engr-In-Charge. Note :- Reinforcement and form work required shall be measured and paid seperately. |
| 11 | M&L for RCC M25 (Design Mix) as in Columns, pillars, piers, posts and struts complete all as specified and directed. Note :- Reinforcement and form work required shall be measured and paid seperately. |
| 12 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 13 | Ditto as per items No 11.00 here-in-above but 5mm and over upto & incl 10mm dia in stirrups, spaces and binders complete all as specified and directed. |
| 14 | M&L for brick work with subclass ‘B’ bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed. |
| 15 | M & L for brick work with sub class ‘B’ brick straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. |
| 16 | M&L for rendering 15mm thick in CM 1:4 on on fair surfaces of brick in two separate coats (10mm thick backing coat and 5mm thick top coat) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing works/concrete surfaces finished even and smooth complete all as specified and directed.Note : (i) WPC will be measured and paid separately (ii) Rates deemed to be inclusive of scaffolding upto height 12 Mtr at reqd places. No additional payment will be made on this account. |
| 17 | M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed. |
| 18 | Supply only intergral water proofing compound complete all as specified and directed. |
| 19 | M&L hardcore of gauge n exc 63mm, broken stone or boulders deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface completed all as specified and directed. |
| 20 | M&L for 75mm thick cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in sub completed all as specified and directed. (Using Dimapur Sand) |
| 21 | M & L for 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified. |
| 22 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 23 | S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:4) as backing coat to receive tiles complete all as specified and directed. |
| 24 | M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.(Using dimapur sand) |
| 25 | M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed. |
| 26 | M&L for preparation of new or previously untreated surfaces of walls and applying two coats of oil bound distemper paint over a coat of primer and 1mm thick wall care putty complete all as specified and as directed |
| 27 | M&L for Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches and one coat of oil bound distemper as required compelete all as specified and directed. |
| 28 | Material and labour for preparation of surface wall for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Deopt Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces complete all as specified and directed. |
| 29 | M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of cement base paint complete all as specified and directed. |
| 30 | Preparation of old plastered surfaces of walls including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and applying one coats of cement base paint including necessary scaffolding complete all as specified and directed. |
| 31 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soft/loose soil complete all as specified and as directed. |
| 32 | M&L for Removing excavated material/soil exe 500 mtr but not exc 1000m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 33 | M&L for structural steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed. |
| 34 | M&L for preparation of newly painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed. |
| 35 | M&L Preparation of old painted surfaces of wood based material exc 10 cm width or girth & applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and directed. |
| 36 | S&F Pre-painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 37 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 38 | S&F Aluminium powder coated frame/chowkats for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 39 | S&F Aluminium powder coated window and ventilator shutters, fixed type without sash bar and including using 4mm thick frosted glass as in louvers, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. including all fitting complete all as specified and directed. |
| 40 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and as directed. |
| 41 | Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and as directed. |
| 42 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 43 | S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 44 | S&F 150 mm long aluminium alloy handles,fabricated type, anodised complete all as specified and directed. |
| 45 | S&F 150 mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. |
| 46 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed. |
| 47 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 48 | S&F Vitreous china wash basin, white flat back shape, including pedestal type of size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but incl brackets, waste pipe & CP waste coupling complete all as specified and as directed. |
| 49 | S&F Pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, but fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 50 | S & F vitreous china European type/pedastal type water closet \\"P\\" and \\"S\\" trap inclduing PVC plastic seat cover (commander) complete all as specified and directed. |
| 51 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 52 | S&F brass chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union any colour for fixing with 15mm pipe complete all as specified and directed. |
| 53 | S&F vitreous china squatting pan \\"Orissa\\" pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) with 'P' or 'S\\" trap from or back inlet etc including connection to trap and flushing pipe and provision of lime concrete bedding complete all as specified and as directed. |
| 54 | S&F PVC flushing cistern syphonic action type,10 litters capacity, low level white with inlet ball, valve, float and handle including bracket ,PVC Connection and flush pipe complete all as specified and as directed. |
| 55 | S&F bore bib taps, ISI marked cast copper alloy, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferule for 15 mm bore dia of pipe complete all as specified and directed. |
| 56 | M&L for Vitreous China urinal, full stall type white with flush pipe, grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed. |
| 57 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as sapecified and directed. |
| 58 | S&F stop valve 20 mm dia cast copper alloy, secrewed down high pressure, with crutch or butterfly handle secrewed both ends for iron pipe and fixed complete all as specified and directed. |
| 59 | S&F PVC connection 15x600mm long with PTMT nuts & bolts complete all as specified and directed. |
| 60 | S&F brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed. |
| 61 | S&F vitreous China soap tray embedded in the wall complete all as specified and directed. |
| 62 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 63 | S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 64 | S&F rotational moulded polyethylene water storage tank(ISI marked) 500 litre capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including all necessary inlet /outlet connections etc complet all as specified and directed. |
| 65 | S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 g m s) complete all as specified and directed. |
| 66 | S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floor complete all as specified and as directed. |
| 67 | S&F 75mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floor complete all as specified and as directed. |
| 68 | S&F in repair PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with access door complete all as specified and directed. |
| 69 | S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 70 | S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 71 | S&F PVC (SWR) vent cowl for 110mm bore pipe complete all as specified and directed. |
| 72 | S&F PVC (SWR) floor trap with grating with incl jointing to waste pipe fixed in cement concerete (1:2:4) diameter of outlet pipe 75mm complete all as specified and directed. |
| 73 | S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed. |
| 74 | S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed. |
| 75 | S&F in repairs fancy type decorative Drapery rod of 20 mm dia for window and doors with decorative doom holders fixed to wall with screw complete all as specified and directed |
| 76 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed. |
| 77 | Removing building materials etc. to a distance of 400m, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed. |
| 78 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, including screed bed 20mm thick in CM 1:3 complete all as specified and directed. |
| 79 | M&L for machine cut kota stone slab 20-25mm thick in riser of steps,skirting,dado and pillar over and including 10mm thick cement mortar backing in cm (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 80 | Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed)One light point controlled by one, one way switch |
| 81 | One ceiling/exhaust fan point controlled by one, one way switch |
| 82 | One socket outlet 5 Amps 5 pin on independent board |
| 83 | One socket outlet 5 Amps 5 pin on same board with other switches |
| 84 | All as per item No. 79.00 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed. |
| 85 | S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed. |
| 86 | S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed. |
| 87 | Supply and fixing modular Switch Socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module. |
| 88 | S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 89 | S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed. |
| 90 | S&F modular white cover plate with frame for fixing of 8 module complete all as specified and directed. |
| 91 | S&F modular white cover plate with frame for fixing of 6 module complete all as specified and directed. |
| 92 | S&F modular white cover plate with frame for fixing of 4 module complete all as specified and directed. |
| 93 | S&F modular white cover plate with frame for fixing of 3 module complete all as specified and directed. |
| 94 | S&F blank spacer plate for single module complete all as specified and directed. |
| 95 | S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed. |
| 96 | S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. |
| 97 | S&F MCB single pole and neutral 40 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. |
| 98 | S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. |
| 99 | S&F PVC rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size 250mm x 200mm x 50 mm deep medium quality ISI marked complete all as specified and directed. |
| 100 | S&F LED light fitting 1x20 Watt , 220 V , AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 101 | S & F of 1100 volts grade heavy duty cabled PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than one meter apart including 4 mm suspension wire one twin core cable 2 core flat of 10 sqmm size complete all as specified and directed. |
| 102 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. |
| 103 | S&F building security light fitting new generation energy saving & environmental friendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP-66 high power LED light 35 watt including suitable size of wall bracket and connecting complete all as specified and directed. |
| 104 | Supply, laying and testing GI tubing medium grade 20 mm dia ISI Marked with all fitting laid in trenches for bore of pipe of following sizes complete all as specified and directed. |
| 105 | Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 20 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge. |
| 106 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. |
| 107 | M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately) Please Enable Macros to View BoQ information |
