|
| 1 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. (DSR-2018, 1.15) 1.15.1 Group A |
| 2 | Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit includingdismantling as required.(DSR-2018, 1.16) |
| 3 | Supplying and drawing 1x1.5 sq.mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (DSR-2018, 1.17) 1.17.1, |
| 4 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (DSR-2018, 1.21)a) 20 mm (1.21.1) |
| 5 | b) 25 mm (1.21.2) |
| 6 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. (DSR-2018, 1.26) |
| 7 | Erection of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required. (DSR-2018, 1.35) |
| 8 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. (DSR-2018, 1.38) |
| 9 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (DSR-2018, 1.41) |
| 10 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. (DSR-2018,1.44) |
| 11 | Supply and Fixing of 36 watt to 46 watt above 3300 leumin indoor Recess mounitng LED Square Ceiling Fitting for Armstrong ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of special Polucarbonate material and driver set complete in all respects. UPPWD-2018 P.S.-1406 Cat-AAA |
| 12 | Supply and Fixing of 12 watt to 15 watt indoor Recess mounitng LED Square Fitting for Armstrong ceiling having Powder coated die cast aluminium housing with extended heat sink and diffuser of Polycarbonate material and driver set complete on all respects. UPPWD-2018 P.S.-1410 Cat-AAA |
| 13 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (DSR-2018, 1.50)a) Upto 450 mm sweep (1.50.1) |
| 14 | b) 510 mm sweep (1.50.2) |
| 15 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. (DSR Electrical 2018)1) 2 Module (75mm X 75mm) (1.27.1) |
| 16 | 2) 3 Module (100mm X 75mm) (1.27.2) |
| 17 | 3) 4 Module (125mm X 75mm) (1.27.3) |
| 18 | 4) 6 Module (200mm X 75mm) (1.27.4) |
| 19 | 5) 12 Module (200mm X 150mm) (1.27.6) |
| 20 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. (DSR Electrical 2018)1) 1002 Module (1.28.1) |
| 21 | 2) 3 Module (1.28.2) |
| 22 | 3) 4 Module (1.28.3) |
| 23 | 4) 6 Module (1.28.4) |
| 24 | 5) 12 Module (1.28.6) |
| 25 | Supplying and fixing following modular switch on the existing modular plate & switch box including connections butexcluding modular plate etc. as required. (DSR Electrical 2018)1) 5/6 amps switch (1.24.1) |
| 26 | 2) 3 pin 5/6 amp socket outlet (1.24.4) |
| 27 | Supplying and fixing following modular socket on the existing modular plate & switch box including connections butexcluding modular plate etc. as required. (DSR Electrical 2018)1) 15/16 amp switch (1.24.3) |
| 28 | 2) 6 pin 15/16 amp socket outlet (1.24.5) |
| 29 | Supply and Fixing of Recess/ Surface/ Pendant mounting round 10 to 15 Watt Led Down Lighter having Powder Coated die cast aluminium housing with heat sink, diffuser / Reflector and driver set complete in all respects. UPPWD-2018 P.S.-1402 Cat-AAA |
| 30 | Supplying and fixing following modular Bell Push on the existing modular plate & switch box including connections but excluding modular plate etc. as required. DSR-2018 (1.24.8) |
| 31 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. DSR-2018 (1.25) |
| 32 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (DSR Electrical 2018)1) 15/16 amp switch (1.23.3) |
| 33 | 2) 6 pin 15/16 amp socket outlet (1.23.5) |
| 34 | 3) 5/6 amps switch (1.23.1) |
| 35 | 4) 3 pin 5/6 amp socket outlet (1.23.4) |
| 36 | Supply and Fixing of Recess/ Surface/ Pendant mounting round 6 to 8 Watt Led Down Lighter having Powder Coated die cast aluminium housing with heat sink, diffuser / Reflector and driver set complete in all respects. UPPWD-2018 P.S.No.-1401 Cat-AAA |
| 37 | S/F of 4 Pole MCB 40A Havells make. Complete in all respects. Cat AUPPWD-2018 PS. No. 1020(10KA) |
| 38 | S/F of D.P. MCB 63A/415 Volt Havells make. Complete in all respects.UPPWD-2018 PS. No. 1011 (10KA) |
| 39 | Supply and Fixing of LED Tube light with batten suitable for upto 1x22 watt. LED tube light complete including tube etc on surface complete in all respects. UPPWD-2018 P.S. 1413 |
| 40 | S/W of submain with two no. 6 sq.mm FR PVC insulated 1100volt grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by E/I UPPWD-2018 PS No. 289(D) |
| 41 | S/W of Submain with 2 nos 4 sq.mm FR PVC insulated 1100V grade multistrand single copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit with one no. 2.5 sq.mm FR PVC insulated multistrand copper conductor cable as earth contuiity wire including matching colour wash etc. complete in all respects. UPPWD-2018 PS.No. 216C |
| 42 | S/F of Fan Regulator Dimmer type 300x400 watt ISI marked on the existing switch board including making connection, required material, labour T/P etc. for proper completion of work of Anchor/Kinjal make. UPPWD-2018 PS No. 1203 |
| 43 | S/F of betten/angle holder complete in all respects UPPWD-2018 PS. No. 405 |
| 44 | Supply and Fixing of pendant mounting having 1'x4' size 40 to 45 watt seamlessly integrates LED luminier with acrylic sheet diffuser and integral electronic driver complete in all respects.UPPWD-2018 P.S. No.-1416 Cat-AAA |
| 45 | S/W of submain with two no. 2.5 sq.mm FR PVC insulated 1100volt grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by E/I UPPWD-2018 PS No. 289 |
| 46 | Wiring point for light with 1 sq.mm FR PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq.mm PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc. complete in all respects, as per direction. UPPWD-2018 PS.No. 131C |
| 47 | Supply and Fixing of Ceiling Fan 48\\" (1200 mm) Crompton Make. Complete in all respect. As per direction of E/I. (AOR) |
| 48 | S/F of 300mm dia Exhaust Fan Khaitan/Almonard make. Complete in all respects. AOR |
| 49 | S/L of Al. Conductor PVC insulated armoured served & sheathed cables 1100 V grade at a depth of 750 below of ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. Clamps etc. of suitable size or as directed by the E/I complete in all respects. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.(P.S. No 501) (a) 10 sq.mm x 2 core |
| 50 | (b) 16 sq.mm x 2 core |
| 51 | (c) 50 sq.mm x 3.5 core |
| 52 | S/F of palm or pin type copper tin plated cable socket (lugs) to the cable leads making connections etc. complete in all respects as pe direction of E/I (PS No. 504.) a)- 10 sq. mm |
| 53 | b)- 16 sq. mm |
| 54 | c)- 50 sq. mm |
| 55 | Wiring of light/power plug with 2x4 sq.mm FRLS PVC insulated copper condustor single core cable in surface/recessed medium class PVC conduit alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (DSR-2016, 1.12) |
| 56 | Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.1- 16 sq. mm 2 core (DSR-2018 9.3.1) |
| 57 | 2- 50 sq. mm 3.5 core (DSR-2018 9.3.19) |
| 58 | Supplying and embedding following dia G.I. pipe 32 mm dia (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. DSR-2018, 11.6 |
| 59 | Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.(DSR-2018, 12.42) |
| 60 | Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required. (DSR-2018, 11.4) |
| 61 | S/F of 11 KV TPMO Relco/Rama make 9 Nos. insulator of Jai shree/BHEL/Rama/ Rastriya make complete in all respects as per direction of E/I UPERC-2019, P-48 |
| 62 | S/F of out door type 11 KV fuse set with insulator jai shree/BHEL make complete in all respects as per direction of E/I. (AOR) |
| 63 | Supply and laying of 1.5 sq.mm 3 core copper conductor unarmoured cable. Complete in all respect. As per direction of E/I. AOR |
| 64 | Supplying and laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete in all respect as per direction of E/I. DSR-2018, 14.16.2 |
| 65 | S/F of 11 KV Disc insulator 70 KN or 7000 Kg. and fitting B&S heavy duty with clamp of cross arm fixed on HT Pole.UPERC-2019 Page no-48 |
| 66 | S/F of 11 KV pin 12\\" long with insulator of Jai Shree/BHEL on cross arm fixed on HT pole including all T/P etc. complete in all respects as per direction of E/I (UPERC-2019) Pg-39 |
| 67 | S/F of Sintex type Junction box model No. llGSJB 2817 of size 280x170x130mm with hinges and locking arrangment & MS clamp made of 50x6 mm flat, complete in all respects including 2 Nos. G.I. Pipe 1.5\\" dia having 0.75 meter length each and chuck nut for cable connection etc. as per direrction of E/I. (AOR) |
| 68 | S/I of International design and styling, 9 fins with three heat settings 800W/1200W/2000W, With 400W PTC ceramic fan heater fan for faster heating, Adjustable thermostat for designed temperature, Noiseless operations, Caster wheels for easy mobility, Cord Winder, Built in handle, 4 safety features- Thermostat- Safety tilt switch to safe guard against improper installation-Manually reset thermal cutout-Auto reset thermal cutout, Approved by BIS (ISI marked) |
| 69 | S/I of International design and styling, 11 fins with three heat settings 1000W/1500W/2500W, With 400W PTC ceramic fan heater fan for faster heating, Adjustable thermostat for designed temperature, Noiseless operations, Caster wheels for easy mobility, Cord Winder, Built in handle, 4 safety features- Thermostat- Safety tilt switch to safe guard against improper installation-Manually reset thermal cutout-Auto reset thermal cutout, Approved by BIS (ISI marked) |
| 70 | S/I of International design and styling, 13 fins with three heat settings 1000W/1500W/2500W, With 400W PTC ceramic fan heater fan for faster heating, Adjustable thermostat for designed temperature, Noiseless operations, Caster wheels for easy mobility, Cord Winder, Built in handle, 4 safety features- Thermostat- Safety tilt switch to safe guard against improper installation-Manually reset thermal cutout-Auto reset thermal cutout, Approved by BIS (ISI marked), |
| 71 | S/I of International design and styling, Two heat settings 1000W/2000W, Fan forced hot air circulation, Cool touch housing, Adjustable thermostat for designed temperature, Heater in winter, personal fan in summer, Triple safety assurance- Thermostat-Auto thermal cutout-Thermal fuse, Approved by BIS (ISI marked), |
| 72 | S/I of International design and styling, 2 Heat settings-500W-1000W, Noiseless operations, Built in handle, Swing facility, Cool touch housing, Automatic temperature control, 3 way safety assurance- Thermal cutout- Thermal fuse-Safety tip over switch to protect the user against tilting, Made in India, Approved by BIS (ISI marked), |
| 73 | S/I of Two heat settings-1000W-2000W, Nickel chrome plated mesh grid, Tilting legs, Bright nickel chrome plated reflector, Approved by BIS (ISI marked), Please Enable Macros to View BoQ information |
