|
| 1 | Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and removing from site all as directed. |
| 2 | Taking down chowkhats or frames with shutters but exc 1.5 sqm but n.exc 4sqm each complete all as specified and directed . |
| 3 | S&F Framed work such as grills, gratings, chowkhats of angle/channel section etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete, all as specified and directed |
| 4 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Make :- Rajshri (Note: stainless steel butt hinges and necessary SS screws shall be paid separately). |
| 5 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressivestrength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete.all as specified and directed. Make :- Rajshri |
| 6 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete.all as specified and directed. Make :- Rajshri |
| 7 | S&F 35 mm thick WPC, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc , divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded with cut mitred beeds for securing glass etc, supplied and fitted to chowkhats complete all as specified and directed. |
| 8 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening Complete as per direction of Engineer-in-Charge. Make : Rajshri |
| 9 | M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.all as per manufacturer's specifications and direction of Engineer-in-charge. Make :- Rajshri |
| 10 | S&F 100 mm size Stainless Steel butt hinges and fixed complete all as specified and directed |
| 11 | S&F Stainless Steel 75mm size butt hinges complete all as specified and directed . |
| 12 | S&F Stainless Steel barrel tower bolt 150mm long extruded section all as specified. |
| 13 | S&F aluminium Stainless Steel tower bolt 100mm long extruded section all as specified. |
| 14 | S&F 100 mm size extruded aluminium handles fabricated type anodised complete all as specified. |
| 15 | S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified. |
| 16 | Supply and fixing factory made uPVC white colour Three track three panels sliding window/openable type with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 17 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will bemitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). Tprofile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 18 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and directed . |
| 19 | S&F Sheet glass 4.80 mm thick, ordinary quality & glazing with oil putty/rubber beading in square in each pane complete all as specified. |
| 20 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth over one coat of red oxide, zinc chrome complete all as specified and directed . |
| 21 | Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and as directed. |
| 22 | M&L for brick work with sub class 'B' bricks old size bricks strainght or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed. |
| 23 | M&L for 1/2 brick work with sub class 'B' bricks , using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 24 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified. |
| 25 | M&L for ready mix plaster of 15mm thick on brick or conc extenal surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer instruction and complete all as specified and directed.. |
| 26 | M&L for ready mix plaster of 10mm thick on brick or conc in ceiling incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer instruction and complete all as specified and directed.. |
| 27 | M&L for preparation of plastered or unplastered surfaces of wall and applying two coats of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing , scraping down smoke suit , moulds,filling gaps wth wall care putty, and applying with fully Automatic Airless spray technology with max working pressure complete all as specified and directed by Engineer-in-charge. |
| 28 | M&L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint and applying with fully Automatic Airless spray technology with max working pressure complete all as specified and directed by Engineer-in-charge. |
| 29 | M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed. |
| 30 | M&L for preperation of old wall surface and applying two coat of oil bound distemper over a coat of 3mm thick putty complete all as specified and directed. |
| 31 | M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash as in ceiling complete all as specified and directed. |
| 32 | M&L for preparation of old plastered surfaces of wall of any description and applying two coats of cement base paint all as specified and directed. |
| 33 | M&L including dismantling , Vitrified ceramic tiles 10 mm thick square/rectangular light shade texture polished,area of each tiles Not exceeding 0.36 sqm,in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed. complete all as specified and directed. Make :Somany ,Kajarya ,Orient |
| 34 | M&L including dismantling , Vitrified ceramic tiles 10 mm thick square/rectangular light shade texture polished,area of each tiles Not exceeding 0.36 sqm,in vertcal surfaces etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 10mm thick backing coat in CM (1:3) complete all as specified and directed. complete all as specified and directed. Make :Somany ,Kajarya ,Orient |
| 35 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, in floors etc. set & jointed, with neat cement slurry and pointed white cement with pigment over 15mm thick screed bed or bedding layer of mortar in cement mortar (1:6) for laying of tiles including dismantling of floor, hearth or wall tiling with cement mortar bedding, tucking and roughening of wall and floor, backing and dispose rubbish out off the premises complete in all respect all as specified and directed. |
| 36 | M&L for Glazed ceramic coloured digital wall tiles of size area exc 0.06Sqm and not exc 0.18Sqm X7-8mm thick set and jointed , including 10mm thick backing coat in CM 1:4 including dismantling of floor, hearth or wall tiling with cement mortar bedding, tucking and roughening of wall and floor, backing and dispose rubbish out off the premises complete in all respect all as specified and directed. |
| 37 | Dismentling of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and directed. |
| 38 | M&L for reinforced cement concrete (nominal mix) type B 0 1:2:4 (12.50mm graded crushed stone aggregate) as in Chajjas, slab and the like complete all as specified and directed. |
| 39 | Use & Waste of formwork to Chajjas, slab ,chullah hoods, troughs and similar items including edges rough finished surfaces complete all as specified and directed. |
| 40 | S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 41 | M&L Granite stone slab 18 to 19 mm thick machine cut polished, bedded and jointed in neat cement slurry and pointed in white cement with pigment to match colour of granite stone with and including screed bed of 20mm thick in cement mortar 1:6 all as directed and specified Please Enable Macros to View BoQ information |
| 42 | M&L Granite stone slab 18 to 19 mm thick machine cut polished, bedded and jointed in neat cement slurry and pointed in white cement with pigment to match colour of granite stone with and including screed bed of 20mm thick in cement mortar 1:6 all as directed and specified Please Enable Macros to View BoQ information |
