Tender For Construction Of Ri Office Cum Residence Building At Binjili Under Kosagumuda Block In The District Of Nabarangpur, Kosagumuda-Odisha

TDR : 55711839

Tender Notice
BOQ

6 Days Left

Kosagumuda , Odisha

Tender Brief : Tender For Construction Of Ri Office Cum Residence Building At Binjili Under Kosagumuda Block In The District Of Nabarangpur

Document Fees
₹ 10000 /-

EMD
₹ 75353.0 /-

Tender Value
₹ 75.35 Lakhs /-

Submission Date
09-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	GROUND FLOOREarth work excavation in foundation in Hard of soil including hard moorum, stoney earth mixed with boulders ( except sheet rocks and boulders requiring blasting) with all leads and lifts including rough dressing the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P required for the work complete as per direction of the Engineer-in-charge.
2	Supplying, filling in foundation and plinth with sand in layers well watered and rammed including cost, conveyance, royalty of all the materials required for the work labour with T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.
3	Cement Concrete (1:3:6) in foundation and floors using 4cm size black broken granite aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceding 15cm (6\\") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royalty, taxes of all materials and labour with T&P required for the work etc. complete as per direction of the Engineer in charge.
4	Cement concrete (1:2:4) with 12mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royality etc. complete
5	Cement concrete (1:1.5:3) with 12mm. Size hard broken granite chips (Crusher broken) for R.C.C. works including hoisting, laying, all cost, conveyance, royality etc. complete. Footing
6	Column up to Plinth beam Level
7	Plinth Beam
8	Column
9	Roof Beam
10	Lintel
11	Roof Slab
12	Stair Case
13	Chajjas
14	Providing HYSD bars including cutting, bending, binding and tying the grills and placing in position including cost, conveyance and royalty of all materials and cost of all labour etc. complete
15	Fly ash Brick masonary in cement mortar (1:6) by using 10\\" size including all cost, conveyance etc. complete.In foundation
16	In Super structure
17	20mm th Cement plaster in C.M (1:4) including punning over walls, finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the
18	Coal taring two coats including cost of coal tar and tar paper with all cost, conveyance, labour, T&P and cess etc. complete as per specifications and direction of the Engineer-in-charge
19	16mm thick inside Plastering with cement mortar(1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge.
20	12mm thick outside Plastering with cement mortar (1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge.
21	Supplying, fitting and fixing of Vetrified tile of size 600mm x 1200mm in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge.
22	Supplying, fitting and fixing of Vitrified tile (In dados / skirting) of premium grade having thickness 8mm to 10mm conforming to IS 13756 of size 60cm x 60cm plain (Ivory) in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge.
23	Fixing chequred tiles in floors, treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.
24	Finishing walls with weather seal coat (two coats) over a coat of cement primer to outer walls surface including cost and conveyance of all materials to site, and all labour charges complete as per direction of Engineer in Charge.
25	Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint.
26	Finishing walls surface with Synthetic putty of approve make and finished smooth and even surface to receive painting incuding scafolding cost conveyance of all materials labour T & P etc. complete
27	Providing, fitting and fixing of 32 mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all fittings and fixtures etc. Complete.
28	Providing, fitting and fixing of WPC Door frame (100 x 75 mm) with approved quality including cost of all fittings and fixtures etc. complete.
29	Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.
30	Providing & Fixing of M.S. window Grills including cost and conveyance of all materials to site, and all labour charges etc complet as per direction of E.I.C.
31	Painting two coats over wood and iron work with approved Enamel paint over a coat of priming including cost and conveyance of all materials to site and all labour charges complete as per direction of E.I.C.
32	Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect.
33	Providing fitting fixing of louvered ventilator including all cost conveyance etc. completed.
34	Dismentaling brick or stone masonry in lime or stone mortar under 3m. Height including stacking the useful materials for reuse and removing the debries within 50 m. lead.
35	Dismantling and removing cement concrete including stacking the useful materials for reuse and removing debris within 50 mt. lead with all labour T & P etc. complete.
36	FIRST FLOORCement concrete (1:1.5:3) with 12mm. Size hard broken granite chips (Crusher broken) for R.C.C. works including hoisting, laying, all cost, conveyance, royality etc. complete.(a) Column
37	(b) Roof Beam
38	(c ) Lintel
39	(d) Roof Slab
40	(e) Stair Case
41	(f) Chajjas
42	Providing HYSD bars including cutting, bending, binding and tying the grills and placing in position including cost, conveyance and royalty of all materials and cost of all labour etc. complete
43	Fly ash Brick masonary with C.M (1:6) in Superstructure including cost ,conveyance, royalty & taxex of all materials, labour, T&P etc. complete including watering and curing for required period as per the direction of the Engineer in charge.
44	Coal taring two coats including cost of coal tar and tar paper with all cost, conveyance, labour, T&P and cess etc. complete as per specifications and direction of the Engineer-in-charge
45	20 mm thick C.P (1:4) over Roof slab including cost, conveyance royalty of all materials and all labour, T&P, etc.complete.finished smooth including watering with cost, conveyance, royalty, taxes of all the
46	16mm thick inside Plastering with cement mortar(1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge.
47	12mm thick outside Plastering with cement mortar (1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge.
48	Providing & Fixing Glazed Tiles in Dados including cost and conveyance of all materials to site, and all labour charges complete including cost of tiles etc as per direction of E.I.C.
49	Supplying, fitting and fixing of Vetrified tile of size 600mm x 1200mm in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge.
50	Supplying, fitting and fixing of Vitrified tile (In dados / skirting) of premium grade having thickness 8mm to 10mm conforming to IS 13756 of size 60cm x 120cm plain (Ivory) in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge.
51	Fixing chequred tiles in floors, treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.
52	Finishing walls with weather seal coat (two coats) over a coat of cement primer to outer walls surface including cost and conveyance of all materials to site, and all labour charges complete as per direction of Engineer in Charge.
53	Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint.
54	Finishing walls surface with Synthetic putty of approve make and finished smooth and even surface to receive painting incuding scafolding cost conveyance of all materials labour T & P etc. complete.
55	Providing, fitting and fixing of 32 mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all fittings and fixtures etc. complete.
56	Providing, fitting and fixing of WPC Door frame (100 x 75 mm) with approved quality including cost of all fittings and fixtures etc. complete.
57	Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.
58	Providing & Fixing of M.S. window Grills including cost and conveyance of all materials to site, and all labour charges etc complet as per direction of E.I.C.
59	Painting two coats over wood and iron work with approved Enamel paint over a coat of priming including cost and conveyance of all materials to site and all labour charges complete as per direction of E.I.C.
60	Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect.
61	Providing fitting fixing of louvered ventilator including all cost conveyance etc. completed.
62	TERRACE FLOORCement concrete (1:1.5:3) with 12mm. Size hard broken granite chips (Crusher broken) for R.C.C. works including hoisting, laying, all cost, conveyance, royality etc. complete.(a) Column
63	(b) Roof Beam
64	(c ) Roof Slab
65	Providing HYSD bars including cutting, bending, binding and tying the grills and placing in position including cost, conveyance and royalty of all materials and cost of all labour etc. complete
66	Fly ash Brick masonary with C.M (1:6) in Superstructure including cost ,conveyance, royalty & taxex of all materials, labour, T&P etc. complete including watering and curing for required period as per the direction of the Engineer in charge.
67	Coal taring two coats including cost of coal tar and tar paper with all cost, conveyance, labour, T&P and cess etc. complete as per specifications and direction of the Engineer-in-charge
68	20 mm thick C.P (1:4) over Roof slab including cost, conveyance royalty of all materials and all labour, T&P, etc.complete.finished smooth including watering with cost, conveyance, royalty, taxes of all the
69	16mm thick inside Plastering with cement mortar(1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge.
70	12mm thick outside Plastering with cement mortar (1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge.
71	Finishing walls with weather seal coat (two coats) over a coat of cement primer to outer walls surface including cost and conveyance of all materials to site, and all labour charges complete as per direction of Engineer in Charge.
72	Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint.
73	Finishing walls surface with Synthetic putty of approve make and finished smooth and even surface to receive painting incuding scafolding cost conveyance of all materials labour T & P etc. complete.
74	Providing & Fixing of M.S. window Grills including cost and conveyance of all materials to site, and all labour charges etc complet as per direction of E.I.C.
75	Painting two coats over wood and iron work with approved Enamel paint over a coat of priming including cost and conveyance of all materials to site and all labour charges complete as per direction of E.I.C.
76	Providing and fixing rain water down pipe with necessary bend shoes and heads including cost of 75mm dia earthen pipe, clamps and nails etc. with all cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge
77	COMPOUND WALLEarth work excavation in foundation in Hard of soil including hard moorum, stoney earth mixed with boulders ( except sheet rocks and boulders requiring blasting) with all leads and lifts including rough dressing the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P required for the work complete as per direction of the Engineer-in-charge.
78	Supplying, filling in foundation and plinth with sand in layers well watered and rammed including cost, conveyance, royalty of all the materials required for the work labour with T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.
79	Cement Concrete (1:3:6) in foundation and floors using 4 cm size black broken granite aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceding 15cm (6\\") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royalty, taxes of all materials and labour with T&P required for the work etc. complete as per direction of the Engineer in charge.
80	Cement concrete (1:1.5:3) with 12mm. Size hard broken granite chips (Crusher broken) for R.C.C. works including hoisting, laying, all cost, conveyance, royality etc. complete. (a) Column base
81	(b) PLINTH BEAM
82	(c )Column
83	Providing HYSD bars including cutting, bending, binding and tying the grills and placing in position including cost, conveyance and royalty of all materials and cost of all labour etc. complete Ground Floor
84	Fly ash Brick masonary in cement mortar (1:6) by using 10\\" size including all cost, conveyance etc. complete.In Foundation
85	Fly ash Brick masonary with C.M (1:6) in Superstructure including cost ,conveyance, royalty & taxex of all materials, labour, T&P etc. complete including watering and curing for required period as per the direction of the Engineer in charge. In superstructure
86	12mm thick outside Plastering with cement mortar (1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge.
87	Finishing walls with weather seal coat (two coats) over a coat of cement primer to outer walls surface including cost and conveyance of all materials to site, and all labour charges complete as per direction of Engineer in Charge.
88	Providing & Fixing of M.S. window Grills including cost and conveyance of all materials to site, and all labour charges etc complet as per direction of E.I.C.
89	Painting two coats over wood and iron work with approved Enamel paint over a coat of priming including cost and conveyance of all materials to site and all labour charges complete as per direction of E.I.C.
90	C.C ROADEarth work excavation in foundation hard soil including moorum, stoney earth mixed with boulders with all leads and lifts including dressing and levelling the bed and depositing the excavated earth away from the work site with all leads and lifts includin
91	Supplying, filling in foundation and plinth with sand in layers well watered and rammed including cost, conveyance, royalty of all the materials required for the work labour with T&P and cess etc. complete in all respect as per specification and direction
92	Providing cement concrete (1:3:6) in foundation and plinth using 4cm size clean hard black granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, ramming wat
93	Cement concrete of proportion (1:2:4) using 12mm size hard granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete and compacting in layers not exceeding 15cm thick with proper packing and ramming each layer
94	E.I. WorksRecessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard )Group-A
95	Group-B
96	Group-C
97	Recessed wiring to Fan Point in... Group-B
98	Recessed wiring to Call Bell Point in... Group-B
99	Recessed wiring to Exhaust Fan Point in Group-B
100	S/F of Angle holder replacing Ceilling Rose
101	S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.
102	Switch BoardsS/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)
103	S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.
104	S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required
105	S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC
106	S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.
107	S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection.
108	S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. (a) 2 Modular box with base & cover
109	(b) 6 Modular box with base & cover
110	( c) 8 Modular box with base & cover
111	(d) 12 Modular box with base & cover
112	Sub-MainWiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) (a) 2x1.5+1x1.5 (1.8.1)
113	(b) 2x2.5+1x1.5 (1.8.2)
114	(c )2x4+1x1.5 (1.8.3)
115	(d)2x6+1x2.5 (1.8.4)
116	(e)Inverter wiring (1x1.5smm) Copper wire (1.19.1)
117	Circuit Breakers & BDBS/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)
118	S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the 2 waydouble door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b)
119	S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b)
120	Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) (a) S/F of SP MCB 16 way double Door (2.3.8 )
121	Main switchesSupply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/ HPL/ Anchor/ L&T /Havels/C&S/R. K.) (a) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )
122	EarthingEarthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)
123	Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)
124	FittingsProviding & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31)
125	S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12\\" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB)
126	S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)
127	S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/HPL/Crompton/Polycab/PAC)
128	S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS)
129	Fixing /I.T.C. of stepped type Modular regulator (1.25a)
130	S/F of 20mm dia down rod with all accessories (1.39+1.41)
131	Supply & fixing of superior type C.I bulk head fitting with 9W Led Bulb for general domestic use ISI marked square / oval type with premetallic glass cover provided with galvanized steel wire guard including necessary connections. ( M-5 )
132	S/F of 20-25 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells )
133	S/F of 30-35 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells )
134	S/F of 45-48 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells )
135	S/F of 12w Watt LED Bulb
136	S/F of 12W LeD Squre (10\\"×10\\") LSDSMN-12W-WW with surface Panel rings (Havels/crompton/philips/panasonic)
137	S/F of portico lamp.
138	S/F of 15 litre water geyser. Make-( V-Guard, Havells,Crompton,Bajaj).
139	Provision of 40mm dia HDPE pipe for laying & protection of cable
140	CablesS/F of 6 sqmm twin core unbonded aluminium service connection wire with no.10 G.I. Guard wire to support the aluminium wire
141	Provision of Armoured cable size 2x6sqmm (15)
142	Laying of MV cable upto 25sqmm in ground (5.1.1)
143	Laying of MV cable upto 25sqmm on surface (5.5.1)
144	Area lightingsSupply & Instalation of 6 meter HDG octagonal Pole shall be designed to withstand the maximum wind speed as per IS 875.(Top 70 mm & Bottom 130mm of 3 mm thick) The poles shall with average coating thickness of 70 micron. The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding (MAKE-Bajaj/Utkarsh )with single arm detachable 1.5 Mtr Bracket (suitable for 70mm top). The Base Plate (225X225X16mm) with 4 nos of plinth Foundation bolts (20 mm dia 700mm Length) to be mounted on concrete Foundation (1'X1'X4' high) usng HYSD steel reinforced for errection of Pole firmly with junction box, DP MCB & coil earthing as per direction of Engineer in Charge
145	PH worksEarthwork in all kinds of soil with in 50mtr initial lead & 1.50mtr initial lift including rough dressing & breaking of clods to maximum 5cm to 7cm & laying in layers not exceeding 0.30mtr in depth & as per the direction of E.I.C.(a) 1st depth-3.05 m x 1.95 m x 1.50 m
146	(b) 2nd depth-3.05 m x 1.95 m x 0.70 m
147	Supplying allmaterials,labour,T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite,payment of royalty,taxes etc.all complete as per direction of E.I.C.
148	Supplying all materials,labour,T&P and providing cc(1:3:6)with 40mm HG metal including watering, curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.
149	Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HBG chips including watering,curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.
150	Supplying all materials,labour,T&P and providing Brick work with K.B.Brick having crushing strength not less than 75kg/cm2 with dimensional tolerence of +/-8% in cm(1:4)including watering,curring, conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per P.H specification and direction of E.I.C.(a) In Foundation and Plinth in CM(1:4)
151	Supplying all labour,T&P and providing 50mm thick precast RCC bafflewalls in cc(1:1.5:3)with 12mm size bhg chips fitted&fixed in position and finished smooth etc all complete as per direction of E.I.C.
152	Supplying all materials,labour,T&P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling then after casting including conveyance of all materials to work site payment of royalty taxes etc all complete as per direction of E.I.C.
153	Supplying all materials,labour,T&P and providing MS reinforcement for RCC work including cutting, bending,binding and tying the grills and placing the position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site payment of royalty,taxes etc all complete as per direction of E.I.C.
154	Supplying all materials,labour,T&P and providing RCC (1:1.5:3)with 12mm size bhg chips for RCC works including hoisting,laying,watering,curring,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per the direction of E.I.C.
155	Supplying all materials,labour,T&P and providing 12mm thick CP in cm(1:3) with punning on brick work including watering,curing,conveyance of all material to worksite, payment of royalty,taxes etc all complete as per direction of E.I.C
156	Supplying all materials,labour,T&P and providing 550x550x100mm thick RCC precast M.H cover in cc(1:1.5:3)using 12mm size hbg chips,placing the cover on the MH/S.tank & finishing smooth etc all complete including watering,curing,conveyance of all materials to work site,payment of royalty,taxes etc all complete as per the specification and direction of E.I.C.
157	Filling in F&P with excavated materials including watering and ramming as per the direction of E.I.C.
158	Supplying all materials,labour,T&P and fixing ceramic tiles/marble tiles/chequered tile in floor,tread and landing on 25mm thick bed of cement slurry mixed with pigments to match the shades of the tile including rubbing and polishing complete as per the specification & direction of E.I.C.
159	Supplying all materials,labour,T&P and fixing porcelain glazed tiles/marble tiles/kota tiles/kodappa tiles on 12mm thick CP(1:3)jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the direction of E.I.C.
160	Providing fitting, fixing of Al. door with OELanodized Al. door section of 9202 as verticla member, 9201 as top meber and 9200 as bottom and middle member and 12 mm thick pre-laminated board fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No.1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete.
161	Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C(a) 110mm dia PVC pipe
162	(b) 160mm dia PVC pipe
163	(c ) 110mm dia PVC'P' trap
164	(d) 110mm dia.PVC S/J/D
165	(e) 110mm dia.PVC Door Bend
166	(f) 110mm dia PVC Plain Bend
167	(g) 110mm dia PVC Tee
168	(h) 75mm dia. PVC pipe
169	(i) 75mm dia. PVC Plain Bend
170	(j) 110mm dia PVC SWR Nanhi trap without jally
171	(k) 110mm dia PVC offset
172	(l) 110mm dia PVC Cowl
173	(m) 125mm dia CP greatings
174	Supplying all materials,labour,T&P and cutting holes through brick/stone masonry wall for taking PVC pipes and fittings including making good the damages etc.all complete as per the P.H. specification and direction of E.I.C.(a) 250mm thick wall
175	(b) Roof cutting
176	Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking GI/PVC pipes and making good the damages as per the direction of E.I.C
177	Supplying all materials,labour T&P and fixing wash down water closet(E.W.C) of ISI mark of with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. (Parry ware/ Hind ware/cera/Equivalent)
178	Supplying all materials,labour,T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C.
179	Supplying all materials,labour,T&P for fixings water closet,squatting pan (I.W.C pan/Orissa pattern squatting pan)dully embedded in CC(1:5:10) using 4cm h.g. metal all complete as per the direction of E.I.C. (Hindware/Parryware/Cerao/Equivalent) 580mm Orissa Pan(White)
180	Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C. (Parry ware/Hind ware/cera/Equivalent)(a) 550mmx400mmsizeWHB
181	Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size HG metal on bed,1st class K.B brickwork in cm(1:6),moulding&shapping the channel inside & benching with cc(1:1.5:3)using 12mm size HG chip,12mm thick cp(1:3) with punning to inside,cement flush pointing(1:3) to outside,RCC coverslab in cc(1;1.5:3)using 12mm size HG chips with RCC MH cover in excavation in all kinds of soil & refilling the cavity around the chamber including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per approved specification & direction of the E.I.C.
182	Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and aound trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.
183	Supplying all materials,labour,T&P and laying of 110mm dia. PVC pipes,in trenches (to level or slope) and jointing with supply of approved rubber lubricant by non heat application method using 40mm bhg metals on bed of the trench and hunching or allround concrete encasing with cc(1:4:8)using 40mm size h.g metal including curing,conveyance of all materials to worksite,payment of royalty,taxes etc. and testing all complete as per approved drawing,design,specification and direction of E.I.C.(a) 110mm dia PVC pipe with allround encasing
184	(b) 160mm dia PVC pipe with allround encasing
185	Supplying all material,labour,T&P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside&outside over masonary brickwork gravel packing in the rear of well steining,RCC coverslab in cc(1:1.5:3)using 12mm size h.g chips fitted with iron lifting handles including earthwork in openwell excavation in all kinds of soil and refilling the cavity around the pit & painting the iron work,watering,curing,conveyance of all materials to worksite,payment of royalty, taxes etc.all complete as per approved drawing,specification and direction of E.I.C.(a) 1.20mx 2.00m deep inside size
186	(b) 1.00mx 2.00m deep inside size
187	Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.
188	Supplying all materials,labour,T&P and cutting holes in RCC,floors,roofs,etc. upto 19cm thick for passing GI/PVC pipes and fitting etc and repairing the holes after insertion of pipes etc with cc(1:2:4) including finishing complete so as to make it leak proof as per direction of E.I.C.
189	Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking GI/PVC pipes and making good the damages as per the direction of E.I.C
190	Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C.(Jaquar Or Equivalent)) (a) 15mm dia C.P Bib Cock(L.B)
191	(b) 15mm dia C.P Bib cock(S.B)
192	(c ) 15mm dia C.P Two Way Bib cock
193	(d) 15mm dia C.P Health Fuccet
194	(f)015mm dia C.P Pillar cock
195	(g) 15mm dia Angle Stop Cock
196	(h) 15mm dia Concealed Stop Cock
197	(i) 15mm dia. C.P flange
198	(j) 25mm dia F.W.V
199	Supplying all materials,labour,T&P and fitting and fixing 10Ltrs capacity PVC LL flushing cistern with a pair of C.I/M.S.brackets complete with fittings such as syphonic arrangement,15mm nominal size Brass/ PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet, overflow pipes,32mm dia PVC flush bend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C
200	Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick AC. sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. (a) Mirror with rectangular shape 450x600mm
201	(b) Glass shelf with C.P. bracket with guard rails
202	Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.
203	Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C(a) 20mmx450mm long CP towel rail
204	(b) CP towel ring
205	(c ) CP liquid soap holder
206	(d) Fixing Of Toilet Paper Holder
207	supplying all labour,T&P materials & fixing wash Kitcken Sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.450mmx400mmx150mm size
208	Supplying all materials,labour T&P and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of E.I.C.
209	Sinking of 200 mmx150mm dia Tube well by fast drilling Sofasticated Rig.Labour for drilling a perfectly vertical bore hole of Specified dia for a specified depth below G.L. throuh consolidated & unconsolidated rock with down hole hammer driiling rigs or cmbintion rigs (650cfm/200 psi)as required to suitable the site condition as per direction of E-I-C. including use of own rigs with it's assocories, tools & plants and consumables etc. for lowering of 125/200 mm dia PVC/GI pipes for housing fitted with socket, and with or without well screen as per the necessity for soft/ medium/ hard and boulder formation (PVC/GI casing pipes if required to prevent collapes of over burden is to be provided by the contractor includung lowering and with drawing of tubewells after completion of the tube wells.)(a) Drilling of 200mm dia. Bore-0.00mtr to 50.00mtr
210	(b) Drilling of 150mm dia. Bore-50.00mtr to 70.00mtr
211	Lowering the following G.I/PVC pipe confirming to ASTM-D-1785/89(sch-80) with or without soltted pipes as per necessity from ground level upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing material,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I) supplied by the contractor (including cost of pipe)(a) Lowering of 200 mm dia PVC pipes:00.00 mtr to 15.00mtr
212	(b) Cost of 200 mm dia PVC pipes:-00.00mtr to 15.00mtr
213	Cleaning and developing the tubewell with their own compressor contineously worked till clean and adiquate discharge is obtained from the tube well including supply of & use of all necessary equipments and labour as per the direction of E.I.C.
214	(Hand Pump)Supplying, all materials, labour, T&P and providing and fixing ISI marked Deep Well Hand Pump Standard HWDP conforming to IS-15500/04 Part-II complete with accessories alongwith 8 nos of connecting rod made of bright bar electro galvanized of 12mm dia of 3 mtr long with coupler and fitted with stand assembly including fitting and fixing and lowering of Hand Pump set at the Tube well with necessary length of riser pipes including carriage and conveyance of all materials and T&P etc all complete as direction of E.I.C.
215	Supplying all materials labour, T & P and construction tubewell platform as per UNICEF design with drain and specification with c:c (1:2:4) using 12mm size C.B H.G chips embedding pedestil base concrete of 76x76x40cm size 1.0mx1.0m inciuding earthwork in all kinds of soil centering and shuttring laying concrete plestering and punning watering and curing finished smoothincluding cist conveyancy of all materials to work site paymentof royalty taxes etc all complete as per approved specification and direction of the E.I.C.
216	Supplying all labour T&P materials for construction of drain as per UNICEF design etc all complete as per the direction of EIC.
217	1.00H.P.Single Phase Submersible Pump SetSupplying of I.S.I.Mark 1.00H.P.Single Phase Verical Submersible Pump Set with discharge of 1800-2200 ltr./hour and a head of 45-60mtr of reputed make like KSB/Texmo & equivalent including all cost, conveyance and taxes etc all complete as per direction of E-I-C.
218	Supplying all labour,T&P and fitting and fixing of 1.00H.P Single phase vetrical Submersible Pump Set with commissioning and testing etc.all complete as per direction of E.I.C.
219	Supplying and fitting and fixing of I.S.I.mark D.O.L Starter of reputed make like BCH or equivalent for 1.00H.P Single Phase Submersible Pump including all cost,conveyance of all taxes etc all complete as per direction of the E.I.C.
220	Supplying and fitting and fixing of three core flat cable(1.5mm2) of I.S.I. make of reputed company like BCH/Finolex or Equivalent and connecting the pump and starter including all cost,conveyance and taxes etc all complete as per direction of the E.I.C.
221	Supplying and fitting and fixing of plastic rope MS Well cover,MS Clamp,stainless steel short piece,bend &socket including all cost ,taxes etc all complete as perdirection of the E.I.C.
222	Supplying and fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C.
223	Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank of conforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts,including hoisting upto a height of 5mtr above G.L and placing the tank in required position including conveyance of all materials to worksite,payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.1000ltrs capacity water storage tank
224	Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.(a) 25mm dia CPVC Pipe
225	(b) 20mm dia CPVC Pipe
226	(c ) 32mm dia cpvc pipe Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Ri Office Cum Residence Building At Binjili Under Kosagumuda Block In The District Of Nabarangpur, Kosagumuda-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Ri Office Cum Residence Building At Binjili Under Kosagumuda Block In The District Of Nabarangpur, Kosagumuda-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us