|
| 1 | CIVIL WORKS-Dismantling brick or stone masonry in clay under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead |
| 2 | Dismantling and removing doors, windows and ventilators,ceilings, partitions etc including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead |
| 3 | Dismantling and removing R.C.C. columns, beams, slab, staircase, landing, lintels including stacking the useful materials for reuse and removing the debris within 50m lead |
| 4 | Dismantling and removing old tiled flooring including removing the base course and stacking the useful materials for reuse and removing the debris within 50m lead . |
| 5 | Dismantling and removing 2.5 cm. thick artificial concrete flooring including stacking the useful materials for reuse and removing the debris within 50m lead |
| 6 | Disposal of building rubbish / malba /rock/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping ground or as approved /directed by Engineer-in-charge, including all lifts involved.etc as per the direction of Engineer-in-charge. |
| 7 | Dismantling & removing 2.5 cm thick A.S.flooring including stacking the useful materials for reuse and removing the debris with in 50. m Lead. (per 1 Sqm.) (Data for 9.3 sqm.) |
| 8 | Removing old lime or cement plaster from walls including raking out joints 12 mm deep & removing the debris with in 50. m Lead. (per 1 Sqm.) (Data for 9.3 sqm.) |
| 9 | Dismantling & removing 2.5 cm thick grading concrete from roof slab cleaning the surface lowering & removing debris with in 50. m Lead. (per 1 Sqm.) (Data for 9.3 sqm.) |
| 10 | Removing old Tar felt from roof cleaning the surface lowering & removing debris with in 50. m Lead. (per 1 Sqm.) (Data for 9.3 sqm.) |
| 11 | Dismanteling & removing cement concrete including stacking the useful materials for reuse and removing the debris with in 50. m Lead. (per 1 Cum.) |
| 12 | Dismanteling & removing RCC chajja, shelves, fins and parapets including stacking the useful materials for reuse and removing the debris with in 50. m Lead. (per 1 Sqm.) (Data for 9.30 Sqm.) |
| 13 | Dismanteling & removing old tile flooring including removing the base course and stacking the useful materials for reuse and removing the debris with in 50. m Lead. (per 1 Sqm.) (Data for 9.30 Sqm.) |
| 14 | Dismanteling & removing old tile cladding from walls including raking out joints 12 mm deep stacking the useful materials for reuse and removing the debris with in 50. m Lead. (per 1 Sqm.) (Data for 9.30 Sqm.) |
| 15 | Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge. |
| 16 | Supplying and filling with sand in foundation and plinth in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper level and gradient including cost of all materials, conveyance,royalties, loading, unloading, cost of all labour, T&P, etc. all complete as per the direction of Engineer-in-Charge. |
| 17 | Providing and laying Plain Cement Concrete of proportion (1:3:6) using 40 mm size grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge. |
| 18 | Providing and laying Plain Cement Concrete of proportion (1:4:8) using 40 mm size grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge. |
| 19 | Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-20 including the cost of Centering and Shuttering (minimum cement content not less than 403Kg/ Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance,loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement |
| 20 | R.C.C. Floor and Roof slab, landing, balconies up to 4.3Mtr. Height. |
| 21 | R.C.C. Lintels. |
| 22 | R.C.C. Chajjas & sunshade |
| 23 | R.C.C. Cover Slab,base,wall |
| 24 | Providing & fixing TMT Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment.) |
| 25 | Providing and laying Brick masonry work in Superstructure using Fly-Ash bricks confirming to IS 12894 and IS 2212 in cement mortar (1:4) for Half Brick Masonry Wall with provisions for 2 nos 6mm dia MS bar at each 4th layer after immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. |
| 26 | Providing 12mm thick cement plaster in cement mortar (1:6) to the surface of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge. |
| 27 | Providing 16mm thick cement plaster in cement mortar (1:6) to the surfaces of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading,royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge. |
| 28 | Providing 6mm thick cement plaster in cement mortar of (1:4) to RCC surfaces such as ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening/ chipping, scraping and cleaning and finishing the plastered surface smooth using wooden floats, bars, etc. only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawing including cost of all materials, conveyance, loading and unloading, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge. |
| 29 | Providing average 25mm thick grading Concrete with (1:2:2) using 6mm hard granite chips mixing of water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance, taxes and sundries, T&P etc. All complete in all respect as per direction of the Engineer -in-charge. |
| 30 | Providing and laying Vitrified Floor Tiles confirming to IS : 15622 of of approved make, quality and colour without any warpage,with intermidiate spacers of 4 mm width laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) with intermidiate spacers of 4 mm including cutting to size, laying and filling the joints with epoxy tile grout of approved shade and colour, cleaning the surfaces with oxlaic acid, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.Make: Tiles-Kajaria/ Somany/ Equivalent. Grout-Fosroc/ Kerakoll/ Weber/ Equivalent(Note- Sample of tiles shall be approved before procurement and use. (600 x 600 mm) |
| 31 | Providing and laying Vitrified Floor Tiles in Dado/Skirting confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance,royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use. |
| 32 | Providing & laying granite stone flooring using 20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 in Counters, Stair Treads, Risers, planter boxes, window sills etc over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade including cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, sundries, watering and curing, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use. |
| 33 | Providing and fixing of 32mm thick flush door with 30mm thick BWR block board pasted with 1mm thick sunmica both side etc including ISI marked necessary hardware fittings such as, SS Concealed Hinges (6\\"), stopper, Door eye & magnet, SS Tower bolt-8\\", Mortise lock Handle, Cylinder coin & knob key & knob, SS lock body etc. including cost of all labours, materials, conveyance, hardware fixing, loading and unloading and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. |
| 34 | Supply and fixing uPVC two track two panel single glazed sliding windows with bug mesh having a frame size of 88mm width x 52 mm ht and wall thickness of 2.2 mm the uPVC frame is reinforced throughout with galvanised steel having a thickness of 1.2 mm and a guide rail is provided on the bottom tracks of the frame for smooth sliding of the sash panels. The sash panel has a size of 57 mm width x 42 mm height and wall thickness of 2.2 mm. The sash panel is reinforced throughout with galvanised steel having a thickness of 1.2 mm.The sash panel also comprises of roller,touch lock in each sash panel,glass beading,rubber gasket,finseal for dust removal and an interlock for holding the tracks together.The sash panel is singly glazed with 5mm thick Clear glass .Complying with relevant standard specification the model and brand of the UPVC window has to be approved by the EIC before fixing.The rates shall be inclusive of all cost of materials,labour,T&P etc. complete. |
| 35 | Supplying, Fitting and Fixing M.S works of approved designs made out of M S Flat, hollwo section, i Section, Square bars/ Round bars etc. in railings, grills, gates etc of approved specifications / dimensions with necessary welded clamps fixed in proper position & plumb including a single coat of priming of approved quality metallic primer, making required holes in Masonary Walls / R.C.C Structures (where necessary) and grouting the clamps with C.C(1:2:4) with 12mm size black hard crusher broken granite stone chips, making good to the damages of Masonary Walls / R.C.C Structures including cost, conveyance, loading, unloading,stacking, royalties and taxes of all materials , cost of all labours, staging, scaffolding, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 36 | Providing and Painting two coats with synthetic enamel paint of approved make, quality and shade on new Steel work to give an even shade over an under coat of primer of approved brand and manufacturer including the cost of all materials, cost of all labour, conveyance, loading, unloading, scaffolding, staging, T&P, etc, all complete as per the direction of Engineer-in-charge.(Note- colour and shade shall be approved before procurement and use.) |
| 37 | Providing and applying 2 coats plastic emulsion paint of approved quality and shade over a coat of wall primer after finishing wall surface of walls with Acrylic wall putty (water based) of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) |
| 38 | Providing and applying two coats of Weather Coat Paint of approved make, quality and shade to the external surface of the building over a coat of primer after finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting of approved shade and quality after cleaning the plastered surface perfectly by watering and brushing including cost of material, putty, paint, brushes, all labour, taxes, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) |
| 39 | Supply & Fixing of Aluminium Composite panel glazing fixed to wall of approved make & Quality with ACP Indo Bond 3mm thick finish of exterior grade the sizes of outer aluminium square frame,inner aluminium square frame of 50x63mm, accessories stainless steel screw,VHP Tape,789 grade section ,coir etc fixinf light for illumination lightening etc complete including the cost of all materials, labour, transportation charges,hire charges of drilling machine etc as per the direction of engineer in charge. |
| 40 | Providing fitting and fixing of false ceilling with aluminium anodised T section No. 3215 with 2'-0\\" C/C, L section No. 1705 upto 15 micron on four walls to be fixed by means of steel screws and P.V.C plug and the aluminium grid 2'-0\\" x 2'-0\\" with 12.5 mm gypsum board suspended from ceiling etc icluding all cost of labour, material, T&P, conveyance, royalities and taxes etc all complete as per the direction of Engineer In Charge. |
| 41 | Providing fitting and fixing of 5 mm thick plain glass including all cost of labour, material, T&P, conveyance, royalities and taxes etc all complete as per the direction of Engineer In Charge. |
| 42 | Supplying, fitting and fixing of stainless steel of 304 grade in hand rail using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mt c/c and stainless square pipe bacing of size 32mm x 32mm x 2mm in three rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance of all materials, labour T&P etc. required for the complete in all respect as per the direction of Engineer -in- charge. |
| 43 | Supplying fitting and fixing W.I. grills, Grills gates, M.S. gates as per approved drawing & designed including marking holes in brick & R.C.C. structures, wood work etc. and marking good to the damages to walls with cement concrete of prop 1:2:3 with black hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceed 25%) complete in all respects W.I. grills, gates M.S. gates screws & other required materials of approved quality will be supplied by the contractor at his own cost. |
| 44 | Supplying and fixing Colour G.C.I sheeet on roof drilling hole in wind ties including fixing of ridges valley wind ties etc excluding cost of fittings Iluding cost of all charges. |
| 45 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing |
| 46 | 90 Cm Equilateral triangle |
| 47 | 80 x 60 Cm rectangular |
| 48 | Supplying, fitting and fixing M.S. pipe for cow catcher as per specification and design including cutting grooves in bricks or RCC structure and making good to the damages with C.C. (1:2:4) including welding, cutting, errecting, cost, conveyance of all materials, cost of all labour, T&P. required for the work etc. complete as directed by the Engineer-in-charge |
| 49 | Supplying ,fitting and fixing of ISMB Sections for cow catcher (4.5m x 1.8m) including labour for lifting,hoisting and placing in position to required size and length ,pre fabricating by cutting to sizes,priming including cost of all materials,cost of all labour,loading,unloading at site,all accessories,T&P required for the work complete in all respect as directed by Engineer in Charge. |
| 50 | Supplying, fitting & fixing of Granite Tiles of minimum 16mm thick and above 0.10 sqm of approved make in Dado over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc |
| 51 | Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge. in Ground Floor |
| 52 | Supplying fitting and fixing of openable UPVC doors of approved make with 6 mm thick glass of approved quality complete with frame shutters and all fittings and fixtures etc complete as per the direction Engineer-In-Charges at all floors and all hights. |
| 53 | Supplying fitting and fixing of WPC Door frame of approved make of approved quality complete with frame and all fittings and fixtures etc complete as per the direction Engineer-In-Charges at all floors and all hights. |
| 54 | Supplying fitting and fixing of WPC Door Shutter of approved make of approved quality complete with shutter and all fittings and fixtures etc complete as per the direction Engineer-In-Charges at all floors and all hights. |
| 55 | Providing fitting and fixing up partition walling OEL aluminium anodised section No-9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as tapered clip for fixing up 12 mm thick prelaminated board and jointing angle No-1855 etc Data for 6'-10\\" x 7'-6\\" = 51.22sft or 4.76 sqm=24.39 Kg |
| 56 | Providing fitting and fixing of pre laminated board including all cost of labour, material, T&P, conveyance, royalities and taxes etc all complete as per the direction of Engineer In Charge. |
| 57 | Supplying, fitting & fixing of Prepolished cement concrete paving tiles of 22-25mm thick of make ultra, Eurocornor Duracrete in floors of size with application of 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) nd filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction |
| 58 | Providing and laying Brick masonry work in Foundation using Fly-Ash bricks confirming to IS 12894 and IS 2212 in cement mortar (1:4) for Half Brick Masonry Wall with provisions for 2 nos 6mm dia MS bar at each 4th layer after immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. |
| 59 | EI WORKS - Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 60 | GROUP-A |
| 61 | GROUP-B |
| 62 | GROUP-C |
| 63 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 64 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5) |
| 65 | Supply & Fixing of 32 amp DP MCB with an enclosure box of an approved ISI Make. |
| 66 | S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 67 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 68 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 69 | S/F of Street light- 90W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) |
| 70 | 6 PASSANGER LIFT (Staff Lift)Design Supply, Installation, Testing & Commissioning of 6 passanger (G+3) and putting into operation with compelete inspection by concerned electrical inspector, Director Factory and Boilers, Odisha with proper testing certificate and final testing of Automatic Lift complete with all standard equipments accessories and control equipments as per Manufacturer's Design with lift control panel including BMS facility and as per BIS and fulfilling following requirements.It includes supply,laying of power cable and fixing of glands,lugs etc.( Machine room less, Gearless Type). Design and as per CPWD /OPWD specification (Part - III Lifts) 1981 with valid lisence for installation and fulfilling following requirements on turnkey basis as per direction of Engg.-in-Charge. LIFT of with machine room type (Make-Kone/ Johnson/ OTIS/ Thysenkrup/Sky touch or equievalant reputed make & model A catogory, ISI marked as approved ) Warrentee period of accessories & system must be 3 years & compelete test certificate must be submitted along with Lift including component list . |
| 71 | Type: Passenger type 6 Pax LIFT Load: 6 Pax Patient Lift (408 KG)Speed: 1.25 Meter Per Second.Control: Variable voltage with variable frequencyOperation: Microsprocessor based simplex collective selective with / without Lift Attendant.Total Rise: About 12 Meters.Landings: For All on same side. Floors Served: GF,1F,2F,3FSignals: Digital Car Position Indicator, Car Travel direction Indicator in Car & at all Landings. Lift Shaft Size: About as 6 passenger lift standard, finished with Plaster. Lift Car Size: About lift standard. Car Entrance: Clear Opening lift standard high Protected with Car Door.Landing Entrance: Clear Opening lift standard high Protected with Landing Door.Car Door: Stainless with Hairline finish Two Panel Center opening flush type.Landing Door: Mild Steel Two Panel Center opening flush type. Door Operation: Automatic Electric Power operated Door with in infrared protection. Car Interior: Stainless Steel Panel with Hair line finish on all sides.Car Floor: Hard Wood covered with PVC / Marblex Tiles.Car Ceiling & Lighting: LED Lighting Concealed by suspended false ceiling with plain acrylic diffiuser. The frame of suspended false ceiling shall be of powder coated Aluminum. Car Ventilation: Pressure Fan with anodized Aluminum Grill. |
| 72 | Emergencing Lighting in Car: Battery operated Emergencing Lighting in the Lift Car. Intercom System: Battery operated intercom system in Lift Car and Control Room.Emergencing Alarm: Battery operated Alarm Bell System in Lift Car and Control Room.Position of Machine Room: Directly above the Lift Shaft.Electric Power Supply: AC 415 Volt 3 Phase 50 Hz terminated in control room along with control panel with facility of BMS connectivity system .The scope of lift control panel is inclussive with lift vender scope.other special provisions• vvvf controller• Automatice Rescue Device (ARD)• emergency light and batary operated alaram bell• dot matrix seven sigment digital position indicators• fire rated door for 2 hours• 3 way intercom/press and speak button with hand set• floor annunciator with music• infra red screen• over load warning indicator• braille buttons• free service for 3 years• pit lader• full car heigh car fixture arrival chime• provision for cc cemara with instrument Fire Man Switch: Fire Man Switch at Main Landing Terminal. |
| 73 | MAIN PANEL FOR BUILDING |
| 74 | Supply ,Installation,testing & commissioning of main control panel wall mounted made out of CR sheet of 16 SWG and boarder angle frame to provide above panel with proper space,hinged door must be painted one coat of powder coating and two coat of enamel grey paint including wiring with appropriate size FRLS PVC single core multistrand copper cable,cable alley and connector with following arrangement.(Depth 15 cm to 30 cm) size (48'' x 48''x15'')=(1.2 x 1.2) sq.mtr |
| 75 | DIGITAL INSTRUMENT:- Voltmeter, Ameter,selector switch & Indicating lamp (R-Y-B) digital,CT coil up to 400 Amp - 1 Set |
| 76 | INCOMING |
| 77 | S/F of 200 Amp 4 pole MCCB, 36 KA with Spreader link with Extended Rotary Handle(L&T/Havells/Legrand) - 1 No. |
| 78 | 125 Amp TPN Changeover switch in open execution (Havells/L&T) - 1 No. |
| 79 | OUTGOING:-I |
| 80 | 100 amp 36 KA 4 pole MCCB (L&T/Legrand/Havells) - 2 nos |
| 81 | 63 Amp 4 pole MCB , (L&T/Legrand/Havells) - 3 nos |
| 82 | 63 Amp 2 pole MCB(L&T/Legrand/Havells) - 2 nos |
| 83 | 32 Amp DP MCB (Havells/HPL/L&T) - 2 nos |
| 84 | CABLE AND ACCESSORIES:- |
| 85 | Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Polycab/HAVELLS/RR KABLE/KEI/Gloster of following size cables as per direction of Engg.-in-Charge. |
| 86 | a)4 core x 16 sq mm |
| 87 | a)3.5 core x 50 sq mm |
| 88 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size of 16 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. |
| 89 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. |
| 90 | Supplying and making end termination with double brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. A) 4 core x 16 sq. mm. |
| 91 | b)3.5 core x 50 Sq.mm Please Enable Macros to View BoQ information |
