|
| 1 | Painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications and as directed by the departmental officers. (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work). |
| 2 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 3 | Providing granolithic floor finish of the 25 mm thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) |
| 4 | Wiring with 2x1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover withTW switch box and 5AFT switch and making good of the concealed portion with suitable colour for PVC concealed light/fan Point (for electronic regulator) (5 points per coil) |
| 5 | Wiring with 2x4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mmx100mmx113mm TW switch box for 15A 3pin noninter locking wall socket with15A flush types witch with painting of suitable colour with continuous earth wirec onnection of 4sq.mm copper wire for open PVC power plug point |
| 6 | Supply and fixing of 48” Ceiling Fan High Speed (without Regulator) Complete As Per PWD SOR 2025-26 M-1351 |
| 7 | Supply and fixing of AC Exhaust Fan 300mm (12”) Sweep (Heavy Duty) Complete As Per PWD SOR 2025-26 M-1343 |
| 8 | Supply and fixing of 4’ 18W Crystal Glass LED Tube Light Fitting Complete As Per PWD SOR 2025-26 M-1211 |
| 9 | Supply and fixing of Four Pole 63A, 10KA MINIATURE CIRCUIT BREAKERS 240 V / 415V 50HZ - AC SUPPLY SUITABLE FOR BOTH LIGHTING AND MOTOR CIRCUITS - HIGHER END As Per PWD SOR 2025-26 M-1772 |
| 10 | Supply and run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains As Per Electrical Data SD-67 |
| 11 | Supply and delivery of 20W LED Street light fitting with minimum of 300mm length of 3 core 1sq.mm copper cable and IP66 Male connector complete as per technical Specification |
| 12 | Supplying and fixing in position best quality 75 mm PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 13 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 14 | PVC Elbow with Door |
| 15 | PVC Tee with Single Door |
| 16 | PVC Bend |
| 17 | Supplying, laying and jointing 25 mm PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. - Internal water supply Above ground level. |
| 18 | Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separate provision for fixing PVC specials needs to be allowed |
| 19 | 25 mm Coupler |
| 20 | 25 mm Elbow |
| 21 | 25 mm TEE |
| 22 | Supplying and fixing in position 15mm dia Screw down tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 23 | Supply and Delivery of Double Burner Cooking Range Size : 48”x27”x16”, Top : 304 grade 16 G SS Sheet, Frame : 32x32x6mm MS Angle, Covering : 20 Gauge SS 304 grade sheet four side, Pan support : 2 Nos cast iron grid, Burner : 2 Nos, T 35 High Pressure Burner LPG with fittings, NCV : 2 Nos, Legs : 1 ½” 16 G SS 304 grade Pipe legs with adjustable Nylon bullet legs. |
| 24 | Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water- cum -Purifier to deliver Potable Water with World HealthOrganisation (WHO) Standards with following accessories.(a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve(with Media Pubble and Fine Sand and Activated CarbonFilling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20 Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. |
| 25 | Supply and installation of Perforated Glass Fiber Reinforced (GFR) Gypsum Concealed Acoustics false Ceilings, GFR gypsum panel, backlined with acoustical fleece, having random circular perforations of 8mm dia, 15mm dia and 20mm dia 5% open area having 4x14mm slotted perforations @ 10x20mm pitch, in H8 Pattern 15% open area size 1200x2400x12.5mm, square edge, volume density of base board 650 Kgs/m3, weight 8Kgs/m2 installed by using Strut ceiling framework. The Strut ceiling framework system shall include Strut WC25, fully knurled, sectional thickness 0.5mm, length 3600mm, unequal flanges of 20 & 30mm and web of 25mm, fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300mm centers. Then suspend Strut MC45, fully knurled, sectional thickness 0.8mm, length 3600mm, equal flanges of 15mm and web 45mm from the soffit at 1200mm centers with Strut SA25, fully knurled, Suspender angle with sectional thickness 0.45mm, unequal flanges of 25 & 10mm such that free end of Strut MC45 rests on Strut WC25 along perimeter of wall.Extra support to be added near jointing of two MC45 so that end cantilever should not be more than 150mm. Strut CC25, fully knurled, sectional thickness 0.55mm, length 3600mm, web 50mm, depth of 25mm and equal flanges 15mm is fastened to the Strut MC45 perpendicularly at 600mm centers for upto RH70, at 400mm centers for RH70-RH90 and at 300mm centers for >RH90 and inserted inside the Strut WC25 at the perimeter Snazz Cosmos panel is installed on the Strut CC25 with suitable fasteners at 600/400/300mm centres. The longer edges of panels should be perpendicular to length of Strut CC25. All edges should be chamfered for V-Groove 4mm gap should be maintained between adjacent boards on all sides and should be filled and finished with Seam AJC and tape Apply one coat of white primer with roller brush evenly across the board surface to achieve uniform colour. The system is backlined with the acoustical infill Synthetic polyfiber 5x50. TechParameters Fire (Class) -1 & P Acoustics - NRC upto 0.75 (For E600” Mounting) Climate (“C, RH)-50, 70 Light reflectance (%) - Paint dependent Green (VOC, RC %) -Low, 25 as directed by the department officers. The cost includes, cost of material, cost of labour, Scaffolding, Transportation, Conveyance Etc. complete complying to standard specication. |
| 26 | Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 27 | Supply and Delivery of Vessels of Following Capacity and Quantity Etc., Complete |
| 28 | Aluminum Dabara, 25 kgs capacity heavy grade |
| 29 | Aluminum Rice Filter, 25 kgs capacity |
| 30 | SS Rice Karandi, Big size |
| 31 | SS Tumblers, with curved edges, 300 ml capacity |
| 32 | Pressure Cooker 22 Litres capacity, ISI make |
| 33 | Aluminium Dubara Lid 25 Kgs |
| 34 | Supply and Delivery of Mixie with 3 jar 1500 W etc., Completed as per standerd Specifications |
| 35 | Supply and Delivery of SS Sambar Karandy |
| 36 | Supply and Delivery of Iron Kadai |
| 37 | Supply & Delivery of SS Hot Box |
| 38 | Supply & Delivery of SS MEALS PLATE 11” DIA |
| 39 | Name Board Work |
| 40 | Supply and Delivery of SS Table For Dining Purpose 304 Grade etc., Completed complying standard Specification. |
| 41 | Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 42 | Add GST 18% Please Enable Macros to View BoQ information |
