|
| 1 | Name of the works |
| 2 | Dismantling the existing Brick masonry, and disposing the debries 1 Km away from the site including cost of all labour charges , lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work . |
| 3 | Chipping the existing plastering, and disposing the debries 1 Km away from the site including cost of all labour charges , lead, lift, etc., complete and as directed by the Engineer incharge of the work. |
| 4 | Dismantling the existing Doors and Windows including removal of frames, hinges and fastenings disposing the wooden scrap materials 1 Km away from the site including cost of all labour charges , lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work . |
| 5 | Providing screed concrete PCC 1:2:4, using 10mm HBG stone chips over a roof slab to average thickness of 5cm including cost of all materials, lead, lift, curing and T&Ps etc complete and as directed by the Engineer incharge of the work. |
| 6 | Brick works in Cement mortar 1 : 5 using Second Class Ground Moulded Chamber Burnt Bricks 9\\"x 4 3/8\\" x 2 3/4\\" including cost of all materials, labour lead, lift, curing, T&Ps etc., complete and as directed by the Engineer incharge of the work. |
| 7 | RCC M20 (1:1.5:3)using 12-20mm HBG stone with form work for lintel beam and sunshade etc., in the following levels as instructed by the Engineer incharge including cost of all materials, labour ,lead,lift etc complete but excluding cost of steel reinforcement. |
| 8 | Providing steel reinforcements for RCC works including cost of steel, binding wire and labour for cutting bending tying and placing in position, lead. Lift, T&Ps etc., complete and as directed by the Engineer incharge of the work. |
| 9 | Providing polished cuddapah slab of 20 mm thick for cupboard as per standard specification and drawing including cost of all materials cutting, fixing, polishing and laying charges, lead,lift, T&Ps and curing etc complete and as directed by the Engineer incharge of the work. |
| 10 | Plastering with C.M 1:5 12mm thick including cost of cement all materials labour, lead, lift, curing, T&Ps etc., complete and as directed by the Engineer incharge of the work. |
| 11 | Flooring with approved ceramic of non slippery type tiles over cement mortar 1:2, 12mm thick including pointing with white cement finishing the joints, flush pointing the surface cost of all materials labour lead lifts etc., complete. |
| 12 | Supplying and fixing of New Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter and including cost of all materials, labour, lead, lift, T&Ps etc., complete as directed by Board Engineer at site. |
| 13 | Supplying and fixing of joint free Stain Free Nano Polish Vitrified Tiles of size 600mm x 600mm x 8mm in CM 1:3 of approved quality and colour including cost of all materials, labour, lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work. |
| 14 | Providing dadooing the inside of toilet walls with glazed tiles 300*200 to a height of 2.10m over cm 1:2 10mm thick and joints shallbe finished with white cement including cost of all materials lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work. |
| 15 | Supplying and fixing European Water Closet of best quality and approved make with “P” or “S” trap, double flapped seat and seat cover with brass hinges and 10 litre capacity PVC low level flushing tank with all internal fittings as instructed by the Enginer incharge including cost of all materials labour, lead, lift, T&Ps etc., complete as per standard specification and also giving necessary correction to the PVC pipe and painting the CI brackets with two coats pf approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works)nt over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) |
| 16 | Supplying and fixing of wash hand basin of size 550mm x 400mm with all accessories such as cast iron brackets , 32mm dia C.P. waste coupling, rubber plug and chain, 32mm dia “ B “ class G.I. waste pipe, 15mm dia G.M. wheel valve , 15 mm dia nylon connection, 15 mm dia brass nipples, 15 mm C.P. pillar tap etc., including cost of all materials, labour lead, lift, etc., complete. |
| 17 | Supplying and fixing best quality of mirror of size 600x450mm mirror with SS soap tray, 600 mm SS towel rod, screws and fixing near the wash basin teak wood round block including cost of all materials, labour, lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work. |
| 18 | Supplying and fixing of PVC pipe of 110 mm dia, 6 kg / cm2 with necessary specials, including cost of all materials, labour, leads, lift, T&Ps etc complete and as directed by the Engineer incharge of the work. |
| 19 | Supply and fixing of 75 mm dia 6kg/CM2 PVC pipe with necessary specials, including cost of all materials, labour, leads, lift, T&Ps etc complete and as directed by the Engineer incharge of the work. |
| 20 | Supplying and fixing in position of 25mm dia UPVC pipes (schedule-40) with ISI monogram with necessary clamps and adhesive solution, etc., including cost of materials,labour, lead, lift, T&Ps etc. Complete and as directed by the Engineer incharge of the work. |
| 21 | Providing and fixing up of 25mm dia Gun metal wheel valve including fixing charges, materials, lead, lift, T&Ps etc., complete and as directed by the Engineer incharge. |
| 22 | Providing and fixing of 12mm screw down bib cock water supply tap including cost of pipe and labour fixing charges lead, lift, T&P and as per standard specification etc. Complete and as directed by the Engineer incharge of the work. |
| 23 | Supplying & fixing of PVC water tank of 1000 litres capacity of reputed make as per the instructon of Engineer-in-charge including cost of tank, transport and fixing charges etc., complete. |
| 24 | Supply and fixing of 100 x 75 mm PVC Nahni trap with grating including cost ofall materials, labours, lead, lift, T&P etc., complete and as directed by the Engineer incharge of the work. |
| 25 | White washing Two coats with white cement including cost of all materials, labour, lead, lift etc complete and as directed by the Engineer incharge of the work. |
| 26 | Painting the inside walls with two coats of best quality interior emulsion of approved colour over a interior primer coat of all materials, etc., complete and as directed by the Engineer incharge of the work. |
| 27 | UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 28 | UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 29 | Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick hylum sheet cover with TW switch box and 5 A F.T switch with continuous earth wire connection of 14 SWG TC for making good of the concealed portion with suitable colour for PVC concealed PVC light point. |
| 30 | Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick hylum sheet cover with TW switch box and 5 A F.T switch with continuous earth wire connection of 14 SWG TC for making good of the concealed portion with suitable colour for PVC concealed PVC fan point. |
| 31 | Wiring with 2x1.5 sq mm (22/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V Grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW Switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking CS plug wire with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. |
| 32 | Wiring with 2x4 Sqmm PVC unsheathe copper multistrand cable 1100Vgrade in suitable PVC rigid conduit pipes with 15A non-interlocking 3 pin wall socket plug only in TW switch box covered with hylum sheet accessories, TW box covered with hylum sheet and continuous earth connection with 14 swg wire for 15A plug point |
| 33 | Supply and fixing of 1200mm sweep AC ceiling fan of Crompton Greaves or Usha or Kaitan make with 300W electronic stepped regulator, fan clamp, extra down rod if any etc., complete. |
| 34 | Supply and fixing of AC Exhaust Fan 300mm (12”) Sweep (Light Duty) with MS / Fibre Louvers Shutters arrangements for 300mm AC Exhaust Fan of Crompton Greaves or Usha or Kaitan make with all accessories, clamp, etc., complete. |
| 35 | Supplying and fixing of RCCB safe trip of appd LEGRAND or ISI make , 63 Amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification and as directed by the Engineer incharge of the work. |
| 36 | Earthing as per PWD standard with an earth electrode of 2m , class B GI pipe of dia. not less than 32mm complete with necessary masonry work |
| 37 | Providing and fixing WPC wall panelling using 9 mm thick with approved ISI make, Including screws and adhesive (Fevicol), with necessary design pattern, finishing with two coats of French/snading polish,including cost of all materials, labour,transportation,loading/unloading, scaffolding, tools & tackles,etc., complete and as directed by Engineer-in-Charge.(as per standard specification) |
| 38 | Providing and fixing suspended false ceiling using GI framework and 12.5 mm thick ISI make gypsum board fixed with drywall screws including perimeter channels, intermediate channels,hangers, jointing tape, jointing compound, including cost of all materials, Labour ,Lead,Lift ,T&Ps etc., complete and as directed by Engineer-in-Charge.(as per standard specification) |
| 39 | Supply , Installation and commissioning of Haier 4 Tr Round Way Inverter Cassette Air Conditioner approved equivalent 4.0 TR 4-Way Inverter Cassette with indoor unit, outdoor unit, decorative panel, refrigerant piping, drain piping, insulation, control wiring, remote controller and all required accessories including cost of all materials, Labour ,Lead,Lift ,T&Ps etc., complete and as directed by Engineer-in-Charge.(as per standard specification) |
| 40 | Providing, fixing, testing and commissioning of electrical 6 No's 20W Surface Light Philips ISO35 LED light fittings and complete with all accessories, mounting arrangements, wiring connections, hardware, testing and commissioning as required and as directed by the Engineer-in-Charge.Light fittings shall be fixed true to line and level.All fittings shall be properly aligned and securely mounted.Connection shall be made using suitable copper conductors. Earthing continuity shall be maintained for metallic fittings.Necessary cut-outs in false ceiling shall be done neatly.Fixtures shall be installed without damage to ceiling or wall finish. all required accessories including cost of all materials, Labour ,Lead,Lift ,T&Ps etc., complete and as directed by Engineer-in-Charge.(as per standard specification) Please Enable Macros to View BoQ information |
