|
| 1 | Please Enable Macros to View BoQ information B.O.Q Name of Work :-------- for renovation of Meeting Hall and waiting Hall at Jawahar Khand , in Raj Bhawan, Bhopal. P.A.C. Rs. :-- Rs. 45,14,500.00, Time allowed:-- 11 Months (Rs. Forty five Lacs, forteen thousand ,five hundred only) S.NO. PARTICULARS UNIT QNTY. RATE AMOUNT IN FIGURE AMOUNT IN WORDS |
| 2 | Providing and fixing Designer Gypsum false ceiling with 12.5 mm thk. M R grade GYPSUM sheet including vertical drops / coves, on wall from ceiling as per design boxing light troughs at various heights as required as per drawing and details, Cut out for lights, A. C. grills etc should be made as required including 12mm ply template to support for lighting and speaker cut-outs, complete as per design and details Black paint to be applied to G. I. framing wherever visible through grills etc. [Quantity includes surface area such as vertical drops, vertical ups, upstands, coves for lighting, boxing, offsets etc. Rate for which shall be paid at the same rate for flat false ceiling.] Details as per detail drawing , 3D view and instruction of Architect /Engineer in charge . |
| 3 | P/F Ply wood ceiling finish with veneer & f of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting . |
| 4 | Providing and fixing of 12mm thk plywood with 12 mm thk pattas to be fixed with 1st quality corner teakwood moulding ply surface finished with 4 mm thick veneer and machine melamine polish (50%matt & 50% gloss) Frame: G.I.frame fabricated with 50 x 37.5/50x30 mm x 0.5 G.I 'C' section, at 1220 c/c, Ceiling sections 80 x 26 x 0.5 @ 400mm c/c I/C P/F wooden moulded beading to fix with screws, plugs etc. complete : Details as per detail drawing , 3D view and instruction of Architect /Engineer in charge . (as per approved sample). Basic rate of veneer: Rs1800/sq.m (Note use existing Moulding after Removing Paint /Polish) |
| 5 | Providing and fixing of 40mm thk BWP Grade Solid Flush Door with 12mm thick ply as design. With approved 4mm thick decorative veneer on both side teak wood beading 50x6mm on edges, MDF moulding 50x30mm, finished with machine melamine polish. Door to have following hardware: Concealed door closer, door to be hung on heavy duty SS hinges size:125x 30x3mm thick). Along with decorative antique brass finished mortised door handle with lock. All complete as per drawings, specification and direction of the Engineer in Charge which includes-transportation, handling charges, scaffolding, etc. Hardware- Hettich or equivalent, Ply and Veneer- Duro mac/ Archid/ Green, Melamine Polish- Asian/ Dulux. |
| 6 | Providing and fixing pelmet made of 18 mm thk ply on front and side ,12 mm ply on top , front and side finish with 4 mm thik Veneer. Veneer to be finished with melamine polish. . |
| 7 | Supply and Fixing wall to wall 100% polyester cut pile machine tufted handloom carpet in approved design &pattern minimum pile weight 900 to 1500 GSM pile height 4 mm to 12 mm latex action cutting pasting by fevicol 505 rubber adhesive , cutting fixing etc complete as per Engineer In charge direction . |
| 8 | Providing and installation of acoustic wall panelling consisting of 20 mm thick Acoustic Cores NRC value 0.65 by using fabric of size 1700mm width .UPVC Griper 25mm series Midseam 25mm , strand, synth PF with requisite accessories and tools. UPVC Griper to be installed on existing wooden base. Fabric of width 1700mm is then aligned to the Stretch tracks by following the fabric thread line or pattern. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. |
| 9 | Providing and Fixing Cabinet, made with 18mm thk ply framing. side vertical and top & 8 mm thick back ply of cabinet . All exposed ply finish with 4 mm thick veneer . Shutters to be made with 18mm thk ply , inner side surface finish with 0.8 mm thick laminate. , All wooden & ply veneer surfaces shall be duly finished with 3 coats of melamine polish 50:50 ratio of glosy & matt polish . Rate to be inclusive of best quality necessary h/w, t.w molding ,25 mm dia SS hanging rods, catcher , handles etc. All works and samples shall be carried out as per detail drawing and instruction of Architect /Engineer In charge. |
| 10 | Providing & Fixing Conferance table 1800 mm wide ,made of 18mm ply top with teak wood moulding 40mmx30 mm & base frame made of 18 mm& 12 mm ply expose surface with finish with 4mm thk approved veneer etc. Complete with 2 or more coat of melamine polish as directed by engineer in-charge. Ply & Veneer : Archid, Century,Duro, Green. make |
| 11 | Providing and fixing of Roller dust proof Blinds black out of approved shade texture and fabric make complete in all respect and properly finished to the satisfaction of Engineer in Charge . |
| 12 | Supply & Installation Curtain Track with Accessries |
| 13 | Supply & Installation Curtain Heavy Drape etc. complete |
| 14 | Applying priming coats with primer of approved brand and mgd, having low VOC content 13.67.3 with water thinable cement primer on wall surface having VOC content less than 50 gms./lit. Sqm. 54.55 24.0 1309.0 One thousand three hundred and nine . |
| 15 | Providing and applying white cement based putty of av. thickness 1 mm of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material ,labour and scaffold etc. in all position complete . Note : Putty shall be applied only on the internal walls for application on the exterioir walls prior permission of APD /Chief Engineer wiil be required.(SOR It. No. 13.41) |
| 16 | Painting with Silicon and arcylic emulsion based water proofing 13.55.2 Two or more coats Sqm. 54.55 101.0 5510.0 Five thousand five hundred ten . Total Rs. 4514548.0 Says Rs. 45,14,500.00 (Rs. Forty five lacs forteen thousand five hundred only) Sub Engineer Sub Divisional Officer Executive Engineer Raj Bhawan,Section P.W.D. City Sub Dn.no.1 P.W.D. Maint. Dn. No.1 Bhopal Bhopal Bhopal |
| 17 | Renovation of Meeting hall and waiting hall at Jawahar Khand in Rajbhawan Bhopal 2nd call. |
