|
| 1 | M&L for installation of false ceiling using Square edge Glass fibre core fully encapsulated ceiling tile of size 595x595x15mm having volume density 100~110Kgs/m3, weight 1.8kg/m2 and 0.3mm thick suspended metal grid system complete all as per manufacturer's instructions and all as specified and directed.Make : ANUTONE (Tiles-Subtex Ebony & grid system-Skelet Trelis T15) or equivalent of Armstrong Ceiling Solutions / Saint-Gobain Gyproc Note : False ceiling must comply the following technical Parameters:- a) Fire (Class) - 1 & P b) Acoustics – NRC 0.9, c) Thermal conductivity (W/mk)– 0.066d) Climate (°C, RH) – 40, 95 e) Light reflectance (%) – low f) Green (VoC, RC %) – Low, 35 |
| 2 | M&L for installation of false ceiling using perforated GFR gypsum panel, backlined with acoustical fleece, having 3x3mm square perforations @ 8.33mm pitch in H1 pattern, size 1200x2400x12.5mm tapered long edges, volume density of base board 700 Kgs/m3, weight 9Kgs/m2 installed by using suspended metal grid system (Strut framework system) complete all as per manufacturer's instructions and all as specified and directed.Make : ANUTONE (Tiles-Pixel 0308 H18 & grid system-Strut framework system) or equivalent of Armstrong Ceiling Solutions / Saint-Gobain Gyproc Note : False ceiling must comply the following technical Parameters:- a) Fire (Class) - 1 & P b) Acoustics – NRC 0.8, c) Climate (°C, RH) – 50, 70 d) Light reflectance (%) – Paint dependent e) Green (VoC, RC %) – Low, 25 |
| 3 | M&L for installation of wall panelling/ lining using Slats, made of pinewood E1 grade fibe rboard, melamine finish, groove perforated slats L24-2 - (2mm grooves @24mm pitch with 4.9% open area) , backlined with Sound texblack acoustical fleece of 0.27mm thick, surface density 63g/m2,tongue-groove edge for a seamless look, 5-test fire retardant grade, size 192x2440x16mm, volume density of base board 700Kg/m3, weight of base board 11.2Kg/m2 installed by using Strut framework system complete all as per manufacturer's instructions and all as specified and directed.Make : ANUTONE (slate-Salon Series – Slats Surco Plus & grid system-Strut framework system) or equivalent of Armstrong Ceiling Solutions / Saint-Gobain Gyproc Note : False ceiling must comply the following technical Parameters:- a) Fire (Class) - A b) Acoustics – NRC 0.8, d) Climate (°C, RH) – 50, 70 e) Light reflectance (%) – 75 (Maple Arce) f) Green (VoC, RC %) – E1, 25 |
| 4 | M&L for installation of wall panelling/ lining using Slim, poly fibre panels, core-pigmented, high-density, Synth PF rigid panels of size 1200x2400x9mm, volume density 200-210kg/m3, weight 1.8kg/m2 adhered on backer board, square edge magnetite bonded 2mm wide pinewood fibre core tiles of size 600x1200x10mm, volume density 400kgs/m3, weight 4kg/m2 and Strut framework system complete all as per manufacturer's instructions and all as specified and directed.Make : ANUTONE (panels-Synth PF & grid system-Strut framework system) or equivalent of Armstrong Ceiling Solutions / Saint-Gobain Gyproc Note : False ceiling must comply the following technical Parameters:- a) Fire (Class) - A b) Acoustics – NRC 0.9, c) Thermal (W/mk)– 0.04 d) Climate (°C, RH) – 50, 99 e) Light reflectance (%) – Colour Dependant f) Green (VoC, RC %) – Nil, 60 |
| 5 | Demolition of brick work or stone/ boulder masonry work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 6 | M&L for Brickwork with old size sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:6 complete all as specified and directed. |
| 7 | M&L for Brick work with old size sub class 'B' fly ash bricks , straight or curved on plan in half brick thick wall built in Cement mortar 1:4 complete all as specified and directed. |
| 8 | M&L for applying 1mm average water proof cement based putty @1kg (undiluted) per sqm on plastered /old prepared surface of wall using fully automatic airless spray machine and sanding when dry with 240 grit sand pad using mechanical wall sander to make the surface even, smooth, clean, free from dust and ready to receive finishing primer/paint coat complete all as specified and directed. Note : (i) Putty powder shall be mixed with water as per manufacturer's recommendation/instruction using mechanical putty mixer having mixing capacity of min 2.5 kg putty per minute and allow 6-8 hrs time to dry the putty surface.(ii) Fully automatic airless spray machine shall have 1 litre per minute minimum flow speed and 3300PSI pressure Make : Birla white / JK putty/ Burger |
| 9 | M&L for one coat of acrylic water based interior grade primer @ 0.9litre(undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface before painting of subsequent coats complete all as specified and directed.Make : Asian(Apex Altima)/ Burger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions |
| 10 | M&L for applying two coats of water based premium acrylic smooth interior emulsion of approved colour over primed surface with fully automatic airless spray machine complete all as specified and directed.Make : Asian(Apex Altima)/ Burger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Fully automatic airless spray machine shall have 1 litre per minute minimum flow speed and 3300PSI pressure (iii) The emulsion shall have silicon additive excellent dirt pickup resistance with low VOC ( less than 50), Antifungal/ Anti Algai properties.(ii) Emulsion not less than 1.79 litre(undiluted)/10 Sqm in two coats shall be used. It can be diluted as per manufacture's instructions |
| 11 | M&L for one coat of acrylic water based exterior grade primer @ 0.9litre(undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface before painting of subsequent coats complete all as specified and directed.Make : Asian(Apex Altima)/ Burger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions |
| 12 | M&L for applying two coats of water based premium acrylic smooth exterior emulsion of approved colour over primed surface with fully automatic airless spray machine complete all as specified and directed.Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.Make : Asian(Apex Altima)/ Burger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Fully automatic airless spray machine shall have 1 litre per minute minimum flow speed and 3300PSI pressure (iii) The emulsion shall have silicon additive excellent dirt pickup resistance with low VOC ( less than 50), Antifungal/ Anti Algai properties.(ii) Emulsion not less than 1.79 litre(undiluted)/10 Sqm in two coats shall be used. It can be diluted as per manufacture's instructions |
| 13 | M&L for complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander machine and make free from dust, loose paint etc by skilled labour complete all as specified and directed.Note :The mechanical sander machine shall have mechanical vacuum mechanism and RPM not less than 1500 with sanding pad dia of 7\\"/9\\"and of 80 grit. |
| 14 | Notes for Srl item No 8 to 13:-The smart painting work under this contract for periodical services shall include the following and the rates quoted by the bidders shall include the same:-(i) The smart painting work under this contract shall be executed by manufacturer's authorised applicator after approval of name of manufactures by the GE. The contractor shall produce the name brand of material and it manufacturer within 10 days from the date of award of tender.(ii) After approval of name paint manufacturer and the product brand, the contractor shall produce a Memorandum of Understanding\\" (MoU) between contractor and the manufacturer within 28 days from the award of tender date or before the commencement date of work wherein the manufacturer shall own the responsibility of use premium quality product in adequate quantity (as per standard coverage area of product), high slandered workmanship and its' warrantee for five years. The contractor shall produce such warrantee in writing along with similar warrantee on manufacture's letter head. The contractor shall also produce purchase vouchers/ Invoice for all product/ metrical utilised in work for their full quantity and Engg-in-charge shall ensure to kept a copy of the same in record duly defaced by him. Purchase vouchers/ invoice must be recorded in measurement book.(iii) The contractor shall arrange all required T&P, scaffolding, trestles, ladders, cradles etc, necessary protective measures for execution of work. (iv) The contractor shall ensure covering to doors, windows, floors, fittings etc to protect them from splashes. After painting work, washing floors, cleaning glass, joinery, electric fittings, wirings etc. Drops and splashes of paint shall be cleaned to the entire satisfaction of Engineer-in-charge.(v) One room shall be painted as sample/ model room for approval of GE and GE prior to carrying out further work. |
| 15 | Demolition of cement concrete in unreinforced in ground floor and paving n'exc 15cm thickness (below or above ground level), any description complete all as specified and directed |
| 16 | M & L for PCC (1:2:4) Type B0 (using 12.5 mm graded stone aggregate) as levelling course (avg thickness n'exc 25mm) complete all as specified and directed. |
| 17 | M&L for PCC 1:4:8, type D2(using 40mm graded stone aggregate) as in sub base foundations/ mass concrete (avg thickness n'exc 75mm) complete all as specified and directed. |
| 18 | M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, finishing surfaces even & smooth without using extra cement including filling of construction joint with bituminous sealing compound complete all as specified and directed. |
| 19 | M&L for moorum/red bajri filling in floors or paving laid in layers n.exc 15cm thick spread levelled and rammed including watering complete all as specified and directed. |
| 20 | M&L for 80mm thick factory made chamfered edge cement concrete colour paver block of M-35 grade, as in footpath, parks, lawns, drive ways or light traffic parking etc, chemically treated, laid in approved colour, design/ pattern, size and shape over and including 50mm thick uniformly levelled surface of stone dust cushioning, filling the joints with sand, finishing and sweeping extra sand complete including dismantling of old unserviceable existing provision complete all as specified and directed.Make : Mehtab tiles Indore(Mehtab)/ Nitco(NITCO)/ Sagar tiles Shaanpur (Sagar) |
| 21 | M&L for 50mm thick sand filling under the floor or in foundation including watering and consolidation complete all as specified and directed. |
| 22 | M&L for non skid, joint free, coloured ceramic tiles, 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 23 | M&L for vitrified, joint free, coloured ceramic tiles, 10mm thick (Square or rectangular), size 1200x600mmx8mm to 10mm thick on walls etc set over and including 15 mm thick cement plaster (1:6) CM set and jointed with costra tile adhesive silvwetype 1T(EN-STDC1TE) and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 24 | M&L for vitrified, joint free, coloured ceramic tiles, 10mm thick (Square or rectangular), area of each tile exc 0.38 sqm but not exceeding 1.00 sqm, in floors etc set over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 25 | M&L for GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 26 | M&L for GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 27 | S&F Antique Copper Towel Rack 600mm long with Lower Hangers, Stainless Steel including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No AKP-ACR-35781)PS or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 28 | S&F 15mm bore 2 Way Bib Cock with Wall Flange (Blush Gold Bright PVD) including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No KUP-BGP-35041PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 29 | S&F 15mm bore Angular stop cock with Wall Flange (BLUSH GOLD PVD) including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No KUP-BGP-35053PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 30 | S&F 15mm bore Exposed part kit concealed stop cock with Wall Flange (BLUSH GOLD PVD) with regular body of concealed stop cock including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar- (Cat Part No KUP-BGP-35083KPM & Cat part : ALD-CHR-083R) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 31 | S&F BIB COCK WITH WALL FLANGE ( BLUSH GOLD PVD - KUBIX PRIME RANGE), Long Body With Wall Flange including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No SKU: KUP-BGP-35037PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 32 | S&F Hand Shower (Health Faucet)- Blush Gold Bright PVD with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- ALD-BGP-573PD or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 33 | S&F Toilet Roll Holder with Stainless Steel Flap-Blush Gold Bright PVD including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- AKP-BGP-35753PS or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 34 | S&F Towel Ring Square Antique Copper Towel Rack 600mm long with Lower Hangers, Stainless Steel including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No AKP-BGP-35721P) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 35 | S&F Vitreous china white Rimless Blind Installation Wall Hung WC With UF Soft Close Slim Seat Cover, Hinges And Accessories Set, Single Piece Slim Concealed Cistern Body With Installation Kit and Control Plate (Blush Gold Bright PVD), ‘P’ or ‘S’ traps, fixing as per manufacture's instructions making all connections (to trap and to cistern) including dismantling / taking down existing WC, cistern etc of any description, complete all as specified and directed.Make : Jaguar {(EWC-Cat Part No SLS-WHT-6953BIUFSMN), (Control plate -JCP-BGP-352415PD) & (Cistern-JCS-WHT-2400)} or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 36 | S&F in repair Thin Rim Table top wash hand basin, white, round in shape with 32 mm size full thread 130 mm in height Click clack waste (Blush Gold Bright PVD) and Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses incl fixing on platform with all required accessories/ fixtures complete in all respect as specified and directed.Make : Jaguar {(WHB-SLS-WHT-6905), (waste -ALD-BGP-727L130) & (Basin mixer-KUP-BGP-35011BPM)} or equivalent of Kohler/Hans Grohe/ Villeroy and boch |
| 37 | S&F Soap Dispenser with glass bottle-Blush Gold Bright PVD complete in all respect complete as specified and directed by Engr-in-Charge. Make : Jaquar Code: AKP-BGP-35735PPD or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 38 | S&F in repair Soap Dish Holder- Blush Gold Bright PVD complete as specified and directed by Engr-in-Charge.Make : Jaquar Code: AKP-BGP-35731PPD or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 39 | S&F in repair 6 mm thick looking mirror bevelled edge of selected quality glass of required shape and size with (Blush Gold PVD Finish) as required 1st class hard wood designer beading frame made around, mounted on 6 mm thick commercial ply or AC building board fitted to wooden plug with Gold finish brass screws complete all as specified and directedMake of glass :- Atul /Modi Float/ Saint Goblin. |
| 40 | S&F in repair Bottle Trap with 300mm & 190mm Long Wall Connection Pipes- Blush Gold Bright PVD for wash basins/urinals with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in all respect complete all as specified and directed. Make : Jaquar Code: ALD-BGP-769L300X190 or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 41 | S&F Vitreous China half stall type Urinal With Spreader And Fixing Accessories Set, fixing plugs, bedding urinal on wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. Make : Jaquar Code: ALD-BGP-769L300X190 or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 42 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed |
| 43 | S&F in repair 15mm dia SS-304 Heavy Duty Connection Pipe for Wash Basin, Geyser, Hot & Cold Water, Basin Mixer | Leak Proof Flexible Tap Connector Pipe | Rust Free, Durable, Long Life ,,450 mm long, complete all as specified and directed. |
| 44 | S&F 12 mm thick toughened as in glass partition / Fixed glass/ door (shutter ) with hydraulic floor spring and top pivot and with set of new SS hydraulic floor spring & top pivot sufficient to operate for the glass doors with weight of 120-150 Kg incl cutting to shape, drilling holes required incl figured/ frosted glass film of required pattern/ logo/ shape on one side and incl fixing on Aluminium / WPC Frame (As per site requirement) incl all required accessories rubber beading, silicon, SS Handle 600mm Long of required design and shape etc Colour as approved by engr-in-Charge Complete all as specified and directed. |
| 45 | S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. Please Enable Macros to View BoQ information |
| 46 | S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. Please Enable Macros to View BoQ information |
