|
| 1 | Supply of following Decentralized materials at the works site as per RESSPO norms |
| 2 | 11 KV 3-Way Ring Main Unit (Motorized) Including required of all accessories |
| 3 | Sundry Items |
| 4 | 11 KV TPMO |
| 5 | 11 KV Fuse Set |
| 6 | 24 Volt Battery & Battery Charger with cabinet |
| 7 | Stone Pad 300X300X75 mm |
| 8 | X-arms holding clamp with nuts & bolt |
| 9 | Clamp with nuts & bolt for Top/Dropper/T-off Channel |
| 10 | E-Bracket with nuts & bolts |
| 11 | F-Bracket with nuts & bolts |
| 12 | All. Lug |
| 13 | Suspension Clamp with nuts & bolts |
| 14 | Three Phase Distribution Box |
| 15 | Three Phase Distribution Box with nuts & bolts |
| 16 | PG Clamp |
| 17 | Dead End Clamp |
| 18 | Eye-Hook |
| 19 | J-Hook |
| 20 | HDPE Pipe |
| 21 | Cartage of following materials from ESC, Mirzapur to work site including loading & unloading charge |
| 22 | 11 KV VCB (O/G), 200/100/5A |
| 23 | ACSR Rabbit Conductor |
| 24 | 11 KV XLPE Cable size 3x185 mm2 |
| 25 | 11 KV Cable Jointing Kit size 3X185 mm2 |
| 26 | PCC Poles 8.5 mtr long |
| 27 | All Line materials with ACSR Weasel Conductor |
| 28 | Transformer 25 KVA, |
| 29 | LT ABC Cable size 3X95+1X70+1X16 mm sq |
| 30 | Erection |
| 31 | Erection of single PCC Pole including digging of pit, fitting of all accessories, earthing of Pole, back filling of earth, grouting of each pole & stay sets & other required works as per RESSPO norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost) |
| 32 | Erection of Sectional Double PCC Pole Structure for distribution T/F including digging of pit, fitting of all accessories, earthing of Pole, back filling of earth, grouting of each pole & stay sets & other required works as per RESSPO norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost) |
| 33 | Mounting of 25 KVA Transformer as per RESSPO norms |
| 34 | Laying, stringing & sagging of ACSR Weasel Conductor upto proper sag, binding of insulators, jumpering etc. as per RESSPO norms |
| 35 | Erection of LT ABC Cable size 3X95+1X70+1X16 mm sq |
| 36 | Installation of 11 KV 3-Way Ring Main Unit (Motorized) Including required of all accessories as per RESSPO norms |
| 37 | Installation of 11 KV VCB pannel (O/G), 200/100/5A as per RESSPO norms |
| 38 | Testing & commissioning of (O/G) 11 KV VCB Pannel as per RESSPO norms |
| 39 | Installation of 11 KV TPMO as per RESSPO norms |
| 40 | Installation of 11 KV Fuse Set as per RESSPO norms |
| 41 | Installation of Battery & Battery Charger with Cabinet as per RESSPO norms |
| 42 | Laying, stringing & sagging of ACSR Rabbit Conductor upto proper sag, binding of insulators, jumpering etc. as per RESSPO norms |
| 43 | Dismentling of Jarjar ACSR Weasel Conductor |
| 44 | Earthing for Indoor equipments including 11 KV VCB pannel etc through boring till the water level with G.I. Pipe & G.I strip and connect of all equipments as per RESSPO norms (All materials will be supplied by the contractor on his own cost). |
| 45 | Laying of 11 KV cable under HDPE Pipe by digging/drilling as per RESSPO norms |
| 46 | Laying of 11 KV cable including digging, bricks & sand as per RESSPO norms |
| 47 | Filling of 11 KV cable jointing kits I/D & O/D size 3x185 mm2 |
| 48 | Dismantalling of existing 11 KV VCB |
| 49 | Cartage of old 11 KV VCB from work site to ESC, Mirzapur including loading & unloading charge |
| 50 | Cartage of Received back jarjar ACSR Weasel Conductor Installation of 11 KV Pilfer proof metering cubicle inside meter room, by fixing rag bolts after checking alignment with trench & conneting incomming & outgoing cable in the CT chamber Please Enable Macros to View BoQ information |
