Tender For Construction Of Dios Office Building In District- Agra (U.P), Agra-Uttar Pradesh

TDR : 55708824

Tender Notice
BOQ

3 Days Left

Agra , Uttar Pradesh

Tender Brief : Tender For Construction Of Dios Office Building In District- Agra (U.P)

Document Fees
₹ 17700 /-

EMD
₹ 2457000.0 /-

Tender Value
₹ 12.28 Crore /-

Submission Date
06-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	OFFICE BUILDINGEarth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.All kinds of soil
2	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
3	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
4	Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
5	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
6	Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.
7	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
8	Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.
9	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinthlevel up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources).
10	Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.
11	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinthlevel up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources).
12	Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
13	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
14	Providing and laying damp-proof course 40mm thick with cementconcrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone aggregate 12.5mm nominal size derived fromnatural sources)
15	Providing & applying a coat of residual petroleum bitumen of grade ofVG-10 of approved quality using 1.7kg per square metre on damp proofcourse after cleaning the surface with brushes and finally with apieceof cloth lightly soaked in kerosene oil.
16	Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in :
17	Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in superstructure above plinth level up to floorV level
18	Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (TMT Bars) Fe-500
19	15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
20	15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)
21	12 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)
22	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone of size 12.5mm nominal size) laid in one layer finished with floating coat of neat cement (25mm thick floor)
23	Chequered terrazo tiles 22 mm thick with graded marble chips of sizeup to 6 mm in floors, jointed with neat cement slurry mixed with pigmentto match the shade of the tiles, including rubbing and polishing complete,on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :
24	Kota stone slab flooring over 20 mm (average) thick base laid over andjointed with grey cement slurry mixed with pigment to match the shadeof the slab, including rubbing and polishing complete with base of cementmortar 1 : 4 (1 cement : 4 coarse sand) :
25	Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
26	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade include in grubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab color of Black, Cherry/Ruby Red or equivalent
27	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately) Sal wood
28	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately)Second Class teak wood 35mm thick shutters
29	Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick
30	Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
31	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, withnuts and screws etc. complete : 300x16 mm
32	Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm
33	Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
34	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
35	Providing and fixing factory made uPVC white color sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to Upvc profile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage of
36	Providing and fixing 12 mm thick frameless toughened glass door shutterof approved brand and manufacture, including providing and fixing top &bottom pivot & double acting hydraulic floor spring type fixing arrangementand making necessary holes etc. for fixing required door fittings, allcomplete as per direction of Engineer-in-charge (Door handle, lock andstopper etc.to be paid separately).
37	Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer
38	Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm)
39	Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete.
40	Providing and laying integral cement based water proofing treatmentincluding preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations: Applying a slurry coat of neat cement using 2.75 kg/sqm ofcement admixed with water proofing compound conformingto IS. 2645 and approved by Engineer-in-charge over the RCCslab including adjoining walls upto 300 mm height includingcleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm
41	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase.
42	Supply & filling of cinder in sunken portion of building including braking in to required sizes including supply of all material, T&P required size including of supply of all material , labour, T&P required for proper completion of work.
43	Providing and laying water proofing treatment in sunken portion of W.C., bathroom etc, by applying cement slurry mixed with water proofing cement compound consisting of applying :- (a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
44	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
45	Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"
46	Construction of drain along with apron (250 X 300 MM)
47	Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with machine cut edges of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). Red sand stone - 30mm thick gang saw cut stone
48	Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete.50 mm long
49	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
50	Providing and fixing of stainless steel letters luminated (alphabets) in matt finish grade 316 (buidling name with logo) total 40 letters (15 inch height) as per approved color font design and size
51	PLUMBINGProviding and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredWhite Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
52	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required for European type W.C. pan with white plastic seat and lid.Make- Cera,Hindware.
53	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tappillar tap.
54	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board of size 510x1040x200mm
55	Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete,including painting of fittings and brackets, cutting and making good the wall wherever required :Size 600x450x200 mm
56	Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.Felxible pipe 32mm dia
57	Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.Felxible pipe 40mm dia
58	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern
59	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requiredRange of two urinal basins with 5 litre white P.V.C. automatic flushing cistern
60	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern
61	Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade (5X4X0.6X2.1)
62	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
63	Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge.15mm nominal bore
64	Providing and fixing CP Brass 32 mm size Bottal Trap of approved quality & make and as per the direction of Enginer-in-charge.
65	Providing and fixing CP Brass Single lever lelephonic wall mixture of quality & make and as per thedirection of Enginer-in-charge. 15mm dia nominal dia.
66	Providing and Fixing C.P. brass Ablution health faucet assembly with 1.0 m long braided PVC hose with mounting bracket fixed on wall complete.[FOR EWC]-Make-JAQUAR ALD-565
67	Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fauct of approved quality conforming to IS:8931. 15 mm nominal bore-ESSCO SQT 526AKN
68	Providing & fixing 60x2cm. C.P. brass towelrail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw. ESSCO AEC-1181
69	Supplying & Fixing of CP soap tray fixed to the wall with PVC rubber plug with CP brass screws- Make-ESSCO AEC-1131
70	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge150 mm nominal dia Pipes
71	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge100 mm nominal dia Pipes
72	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 80 mm nominal dia Pipes
73	Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc. for 100mm dia pipe.
74	Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc. for 75mm dia pipe.
75	Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.100mm inlet & 75mm outlet.
76	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.110mm diameter
77	Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.110mm
78	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110mm
79	Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
80	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes
81	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall32 mm nominal dia Pipes
82	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 40 mm nominal dia Pipes
83	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall50 mm nominal dia Pipes
84	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c ixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc16mm dia nominal bore
85	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c ixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc20mm dia nominal bore
86	Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.15mm nominal bore
87	Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 15mm nominal bore
88	Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal bore
89	Providing and fixing gun metal gate valve with wheel of approved quality.25mm dia nominal bore
90	Providing and fixing gun metal gate valve with wheel of approved quality.32mm dia nominal bore
91	Providing and fixing gun metal gate valve with wheel of approved quality. 50mm dia nominal bore
92	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete20 mm nominal bore
93	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete25 mm nominal bore
94	Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
95	Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes 80mm to 300mm diameter.
96	Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150mm diameter
97	Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :200mm diameter
98	Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.150mm diameter
99	Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.200mm diameter
100	Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).For Sewer Line
101	Extra for depth of man hole size 90x80 cm
102	Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design.
103	Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work)50mm nominal bore.
104	Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes in external work.50mm nominal bore.
105	Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.50mm
106	Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand ) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :With F.P.S. bricks
107	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :50 to 80 mm dia nominal bore
108	SEPTIC TANK & SOAKPITEarth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed.In all kind of soil upto 1.5m depth
109	Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed.In all kind of soil upto 1.5m to 3.0m. depth
110	Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed.In all kind of soil upto 3.0m to 4.5m. depth
111	Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 stone ballast 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors.
112	Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand)
113	Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) including centering and shuttering and reinforcement. M20
114	TMT Fe-500 or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
115	15 mm cement plaster on plinth of mix : 1:4 (1 cement: 4 coarse sand). F.M.-2.25
116	Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.
117	Providing and fixing C.I. tee at the inlet and outlet of septic tank.
118	Providing & fixing 75mm dia vent pipes.
119	Providing & fixing of 75mm dia cast iron terminal guard.
120	Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.M.D. -10- Circular shape 500mm internal diameter
121	Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.M.D. -2.5- Circular shape 450mm internal diameter
122	Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 150 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design.
123	ELECTRICALWiring points for light with 1.5 sqmm. FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm. FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.Light
124	Wiring points for light with 1.5 sqmm. FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm. FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.two ways light
125	Wiring points for light with 1.5 sqmm. FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm. FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.Fan
126	Wiring points for light with 1.5 sqmm. FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm. FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.Exhaust fan
127	Wiring points for light with 1.5 sqmm. FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm. FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.Plug with 1.5 sqmm.
128	Wiring points for light with 1.5 sqmm. FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm. FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.Call bell
129	Wiring points for light with 1.5 sqmm. FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm. FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.Power plug with 20A /250
130	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
131	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
132	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
133	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required4 X 6 sq. mm + 2 X 6 sq. mm earth wire
134	Erection and testing of ceiling fan and regulator for room height upto 3.5 m including supply of 3 mm thick G.I. pipe 19 mm dia. Duly painted, complete in all respect.
135	S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work.
136	Supply fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.
137	Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
138	Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properly etc. complete as required.
139	Supply and fixing of 36 Watt to 46 Watt above 3300 leumin indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.(CAT-AA)
140	Supply and fixing of LED Tube light with batten suitable for up to 1 x 22 watt LED tubelight fitting including tube on surface complete in all respect. (CAT-AAA)
141	Supply & fixing of Call Bell Of Approved Make on matching polished MDFEG board brass including connection etc. as required.
142	Supply & fixing of buzzer on polished MDFEG/Teak ply board including making connections etc. complete in all respect.
143	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
144	Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
145	Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.S&F of 63 Amp. 4 Pole Isolator (CAT A)
146	Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve
147	Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.S&F of 6 Amp to 32 Amp. MCB (10 KA) C Curve
148	S&F single pole MCB blanking plate.
149	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
150	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
151	Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
152	MAIN DISTRICBUTION BOARD(PANEL)Incoming400 Amp. MCCB-1 Nos.Outgoing200 Amp. MCCB-1 No
153	Pannel Cubicle Type100 Amp MCCB - 2 Nos63 Amp. MCCB-1 No200 Amp. MCCB-2 Nos
154	Supply and fixing 400 Amp TPN sandwich aluminium bus bar trunking complete suitable for IP 54 protection with top end cover plate of 1.6 mm thik G.I. sheet with suitable arrangement for fixing etc complete in all respect.
155	Supply and fixing of Tape off box 125 Amp to 200 Amp TPN for sandwitch aluminium bus bar trunking complete in all respect.
156	Sub-distributiion PanelIncoming200 Amp. MCCB-1 NoOutgoing100 Amp. MCCB-2 NosMetering :1 No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.1 No. (0-400A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.1 Set of Phase Indication Lamp.Bus Bar :1 No.400 A, TPN aluminimum bus bar of suitable length.Outgoing :Phase indication lamps on each outgoing to be provided.
157	100 Amp. MCCB- 2 No. 63 Amp. MCCB- 3 No. Extra 100 A MCCB
158	S&F of 400 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting andother material required for proper completion of the work as perdirection and satisfaction of Engineer in charge.
159	Supply and laying of 1800mm x 900mm x 12mm thick chequered rubber matting of tested quality.
160	Supply and fixing of danger board fabricated from 10 gauge M.S. sheet as per I.E.rules.
161	Supply and laying of aluminium conductor, PVC insulated armoured, served, sheeted cable 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and top on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the Engineer- In charge, complete in all respect. the armouring of the cable shall be properly connected with the earth condutor by clamps etc.95 sq. mm 3-1/2 core
162	Supply and laying of aluminium conductor, PVC insulated armoured, served, sheeted cable 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and top on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the Engineer- In charge, complete in all respect. the armouring of the cable shall be properly connected with the earth condutor by clamps etc.150 sq. mm 3-1/2 core
163	Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheated, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer in Charge95 sq. mm 3-1/2 core
164	Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheated, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer in Charge150 sq. mm 3-1/2 core
165	Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respects as per direction of the Engineer in Charge.95 sq. mm
166	Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respects as per direction of the Engineer in Charge.150 sq. mm
167	Supply of ceiling fans BEE 5 Star rated-1200mm sweep with fan motor of A.C permanent insulation,capacitor rating confirming BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltge 220/240 volts, 50Hz, 1-ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system.
168	Supplying of Heavy duty capacitor start single phase ISI marked 300 mm dia Single Phase Industrial duty (Propeller Type Exhaust Ventilating Fans) 4 pole 1500 rpm exhaust fan having power consumption of 100 w or below and airflow of 6800 CMH and noise level below 65 dB but without regulator complete with louver, bird screen etc. and with 3 core flexible wire lead as required. .
169	S/I/T/Commissioning of Krone box telephone TAG block in a thermoplastic IP 65 weather proof inclousure internally embedded gasket anti embedded shock proof for cable through IP 65 glands complete in all respect10 pair
170	EXTERNAL ELECTRIFICATIONSupply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sqmm 4 core
171	Supply and fixing of brass nickle plated compression gland for PVC insulated and armoured served sheathed, under ground cable including rubber ring etc. complete in all respects, the armouring of the cable shall be properly connected with earth as per direction of Engineer-in-charge. 16 sqmm 4.0 core
172	Supply and fixing of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape, and making connections etc. complete in all respects as per directions of the Engineer-in-charge. 16 sqmm
173	Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.
174	Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 150 Watt. Confirming to IP 65 and above Protection complete in all respects
175	FIRE FIGHTINGSupply and fixingof fire extinguisher,ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completionof work
176	Supply and fixingof fire extinguisher,ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completionof work
177	Supply and fixingof C02 type fire extinguisher4.5 kg. capacity each (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completionof work.
178	Supply and fixingof C02 type fire extinguisher 6.5 kg. capacity each (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completionof work.
179	Supply and fixingof fire bucket, round bottom made of G.I. sheet 9-11 litrescapacity duly painted as per fire brigade design, supported each on hangingbracket chained and locked, initiallyfilledwith fine river sand, water as per directionsof Engineer-in-Charge.
180	Supplying, installation, testing and commissioning of microprocessor based intelligent addressable main fire alarmpanel, central processing unit with the following loopmodules and capable of supporting not less than 240 devices(including detectors) and minimum 120 detectors per loopand loop length up to 2 km, network communication card,minimum 320 character graphics/ LCD display with touchscreen or other keypad and minimum 4000 events history login the non volatile memory (EPROM), power supply unit (230± 5% V, 50 hz), 48 hrs back-up with 24 volt sealedmaintenance free batteries with automatic charger. Thepanel shall have facility to connect printer to printout log andfacility to have seamless integration with analog/digital voiceevacuation system (which is part of the schedule of workunder SH: PA System) and shall be complete with allaccessories . The panel shall be compatible for IBMS systemwith open protocol BACnet/ Modbus over IP complete as per specifications Two loop Panel
181	Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
182	Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required
183	Supplying, installation, testing & commissioning fire alarmsounder with facility to make announcement, mounted in M.S.box (16 SWG) with hinged cover plate & suitable for operationwith amplifier i/c line matching transformer etc. complete asrequired.
184	Supplying, installation, testing & commissioning of addressable manual call point complete as required.ing.
185	Supplying, installation, testing & commissioning of exit point directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns complete as required
186	Supplying Installation testing & Commissioning Intelligent Addressable single Addressable Control Relay Module-Form \\"C\\" contact type.
187	Supply laying testing & Commissioning of 2 corex 1.5 sq.mm single standard copper conductor, PVX insulated armoured cable.
188	WET RISER/HYDRANT SYSTEM WORK Providing laying, testing & commissioning of 'C' classheavy duty MS Pipe conforming to IS 1239/3589 i/cfittings like elbows, tees, flanges, tapers, nuts bolts,gaskets etc. in ground including welding, excavation &providing cement concrete blocks as supports,anticorrosive treatment with coaltar/asphalt tape as perIS 10221, refilling the trench etc. of following sizescomplete as required200 mm
189	Providing laying, testing & commissioning of 'C' classheavy duty MS Pipe conforming to IS 1239/3589 i/cfittings like elbows, tees, flanges, tapers, nuts bolts,gaskets etc. in ground including welding, excavation &providing cement concrete blocks as supports,anticorrosive treatment with coaltar/asphalt tape as perIS 10221, refilling the trench etc. of following sizescomplete as required150 mm
190	Providing laying, testing & commissioning of 'C' classheavy duty MS Pipe conforming to IS 1239/3589 i/cfittings like elbows, tees, flanges, tapers, nuts bolts,gaskets etc. in ground including welding, excavation &providing cement concrete blocks as supports,anticorrosive treatment with coaltar/asphalt tape as perIS 10221, refilling the trench etc. of following sizescomplete as required100 mm
191	Providing laying, testing & commissioning of 'C' classheavy duty MS Pipe conforming to IS 1239/3589 i/cfittings like elbows, tees, flanges, tapers, nuts bolts,gaskets etc. in ground including welding, excavation &providing cement concrete blocks as supports,anticorrosive treatment with coaltar/asphalt tape as perIS 10221, refilling the trench etc. of following sizescomplete as required80 mm
192	Providing laying, testing & commissioning of 'C' classheavy duty MS Pipe conforming to IS 1239/3589 i/cfittings like elbows, tees, flanges, tapers, nuts bolts,gaskets etc. in ground including welding, excavation &providing cement concrete blocks as supports,anticorrosive treatment with coaltar/asphalt tape as perIS 10221, refilling the trench etc. of following sizescomplete as required25 mm
193	Supply & fixing of welding Heavy Quality Class 'C', MS pipe conforming to IS:1239 (part-1) for pipes up to 150 mm dia and IS: 3589-1991 for pipes above 150 mm including cutting, threading, welding, clamping fitting with elbow, socket nipple, clamping with MS angle iron supports and fasteners etc. also painting with red oxide and PO red enamel paint complete in all respects.Sprinkler system100 mm
194	Supply & fixing of welding Heavy Quality Class 'C', MS pipe conforming to IS:1239 (part-1) for pipes up to 150 mm dia and IS: 3589-1991 for pipes above 150 mm including cutting, threading, welding, clamping fitting with elbow, socket nipple, clamping with MS angle iron supports and fasteners etc. also painting with red oxide and PO red enamel paint complete in all respects.Sprinkler system80 mm
195	Supply & fixing of welding Heavy Quality Class 'C', MS pipe conforming to IS:1239 (part-1) for pipes up to 150 mm dia and IS: 3589-1991 for pipes above 150 mm including cutting, threading, welding, clamping fitting with elbow, socket nipple, clamping with MS angle iron supports and fasteners etc. also painting with red oxide and PO red enamel paint complete in all respects.Sprinkler system50 mm
196	Supply & fixing of welding Heavy Quality Class 'C', MS pipe conforming to IS:1239 (part-1) for pipes up to 150 mm dia and IS: 3589-1991 for pipes above 150 mm including cutting, threading, welding, clamping fitting with elbow, socket nipple, clamping with MS angle iron supports and fasteners etc. also painting with red oxide and PO red enamel paint complete in all respects.Sprinkler system32 mm
197	Supply & fixing of welding Heavy Quality Class 'C', MS pipe conforming to IS:1239 (part-1) for pipes up to 150 mm dia and IS: 3589-1991 for pipes above 150 mm including cutting, threading, welding, clamping fitting with elbow, socket nipple, clamping with MS angle iron supports and fasteners etc. also painting with red oxide and PO red enamel paint complete in all respects.Sprinkler system25 mm
198	Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories Pendent Sprinkler
199	Supplying, fixing, testing and commissioning of butterflyvalve of PN 1.6 rating with bronze/gunmetal seat duly ISImarked complete with nuts, bolts, washers, gasketsconforming to IS 13095 of following sizes as required150 mm
200	Supplying, fixing, testing and commissioning of butterflyvalve of PN 1.6 rating with bronze/gunmetal seat duly ISImarked complete with nuts, bolts, washers, gasketsconforming to IS 13095 of following sizes as required100 mm
201	Supplying, fixing, testing and commissioning of butterflyvalve of PN 1.6 rating with bronze/gunmetal seat duly ISImarked complete with nuts, bolts, washers, gasketsconforming to IS 13095 of following sizes as required80 mm
202	Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100 mm
203	Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80 mm
204	Supplying and fixing first-aid Hose Reel with MSconstruction spray painted in post office red,conforming to IS 884 complete with the following asrequired.20 mm nominal internal dia water hose thermoplastic(Textile reinforced) type -2 as per IS: 1258520 mm nominal internal dia gun metal globe valve &nozzle.Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metalvalve & M.S. Pipe and socket.
205	Supplying and fixing orifice plate made out of 6 mmthick stainless steel (Grade 304) with orifice of requiredsize to be fitted between flange & landing valve of external and internal hydrants to reduce pressure atthe outlet to the level of 3.5 kg/cm2complete as required.
206	Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm in height with air releasevalve on top nd flanged connection to riser, drainarrangement with 25 mm dia gun metal wheel valvewith required accessories, pressure gauge andpaintingwith synthetic enamel paint of approved shade as required
207	Supplying Installation Commissioning of 25 mm Ball valve PN-1 gunmental as per IS:778 including necessary accessories and connections.
208	Providing / Fixing of Fire Hose cabinet (intarnal+extarnal Use) box made out of 18 gauge MS sheet including two coats of post office red paint over one coat of primer with 4 mm, thick glass door in front painted \\"FIRE\\" in red luminous paint. The size of the box should be 750 mm X 600 mm X 250 mm size capable of accommodating a pair of hose with coupling and nozzle. The box should be floor mounted type with railway coach lock arrangement and lever for opening the door after breaking the glass complete.
209	Supplying and fixing 63 mm dia, 15 m long RRL hosepipe with 63 mm dia male and female couplings dulybound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : gun metal
210	Supplying fixing of S.S. Branch pipe, short type with 63 mm male instantaneous intel, male threaded outlet, fitted with 15 mm bore nozzle having IS:903 mark.
211	Supplying, installation, testing and commissioning ofelectric driven terrace pump suitable for automaticoperation and consisting of following, complete in allrespects, as required: (Terrace Pump)(a) Horizontal type, multistage, centrifugal, split casingpump of cast iron body & bronze impeller with stainlesssteel shaft, mechanical confirming to IS : 1520b) Suitable HP squirell cage induction motor TEFC typesuitable for operation on 415 volts, 3 phase, 50 Hz, ACsupply with IP55 class of protection for enclosure,horiziontal foot mounted type with Class-'F' insulation,conforming to IS-325.(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.(d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head
212	Supplying Installation testing & Commissioning of vertical aire vessel fabricated from 6 mm thick MS plate with dished ends 250 mm dia DN 1.2 m high common for fire and jockey pump complete with spring loaded safety valve.Test pressure 12 kv/Sq.mm)
213	Supplying fixing of Cast iron body 63 mm dia male instantaneous intel coupling with housing cabinet (500X400X400 for 2 way and 600X400 for 4 way) cap and chain for fire brigade correction conforming to IS:904 and making connection with fire fighting pipe or underground water tank completing the work in all respect as per the directions of the Engineer-in-charge.4 way connection
214	Providing/Fixing of cubical type floor mounted Fire pump control panel fabricated from 16 G M.S. sheet duly powder coated finish of approved shade and comprising of:a) One 63 amp. TP-NL M.C.C.B. with rotary handle of beacking capacity 35 KV. b) One Volt meter (0-500 V) with selector swich. c) One set including lamps.
215	Supplying and laying of Insulated PVC sheathed, Steel Aromed, Copper Aluminium Conductor, 1100V grade Powder Cable. The cable shall be laid in tray / in trenches/on wall/ floor etc. As required (Approx quantities only)2 core x 1.5 sq.mm Cu Cable
216	Supplying and laying of Insulated PVC sheathed, Steel Aromed, Copper Aluminium Conductor, 1100V grade Powder Cable. The cable shall be laid in tray / in trenches/on wall/ floor etc. As required (Approx quantities only)3.5 core X 25 sq.mm AL Cable
217	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.150 sq. mm 3-1/2 core
218	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.50 sq. mm 3-1/2 core
219	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.35sq. mm 3-1/2 core
220	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.10 sq. mm 3-1/2 core
221	Supplying and fixing of Self Glow Exit signage for stairs and exists size 100 x 300
222	Fire man axe
223	Pressure Switch
224	Supply & fixing of ISI mark P.V.C. water tank (I,e. syntex or equvilant) with complete fitting and making base plate form
225	Surface dressing of road with Painting between using 2.25 kg. of bitumen per sq.mt with 1.65 cum of stone chipping, 13.2 mm nominal size/100 sq.mt of road surface including corolidation. (Although this job the fore will be given to civil contractor/Required Tank and pump house as per direction fo Fire Department.
226	Supplying, installation, testing and commissioning ofElectric driven Main Fire Pump suitable for automaticoperation and consisting of following, complete in allrespects, as required :(a) Horizontal type, multistage, centrifugal, split casingpump of cast iron body & bronze impeller with stainlesssteel shaft, mechanical seal conforming to IS 1520.(b) Suitable HP Squirrel cage induction motor, TEFC,synchronous speed 1500 RPM, suitable for operationon 415 volts, 3 phase 50 Hz, AC supply with IP 55protection for enclosure, horizontal foot mounted typewith Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated Common base plate, coupling,couplingguard, foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plastered.1620 lpm at 56 m Head
227	Supplying, installation, testing and commissioning ofdiesel engine driven main fire pump suitable forautomatic operation and consisting of following,complete in all respects, as required : (Diesel DrivenPump)Horizontal type, multistage, centrifugal pump of cast ofiron body and bronze impeller with stainless steel shaft,mechanical seal conforming to IS 1520.Suitable HP, 1500 RPM water cooled with radiator,diesel engine conforming to relevant IS standardcomplete with auto starting mechanism, 12 /24 voltselectric starting equipment, diesel tank, exhaust pipeextended upto 10 m outside pump house duly insulatedwith 50 mm thick glass wool with 1.0 mm thickaluminium sheet cladding, residential silencer,instruments and protection as per standardspecification, stop solenoid for auto stop in the event offault with audio indications, painted with post office redcolour etc. as required.M.S fabricated, common base plate, coupling, couplingguard, foundation bolts etc. as required.Suitable cement concrete foundation duly plasteredand with anti vibration pads. 1620 lpm at 70 m Head
228	Supplying, installation, testing and commissioning ofelectric driven pressurisation pump suitable forautomatic operation and consisting of following,complete in all respects, as required : (Jockey Pump)Horizontal type, multistage, centrifugal pump of castiron body and bronze impeller with stainless steel shaft,mechanical seal conforming to IS : 1520.Suitable HP squirell cage induction motor TEFC typesuitable for operation on 415 volts, 3 phase 50 HzAC supply with IP 55 class of protection for enclosure,horizontal foot mounted type with Class-'F' insulation,conforming to IS : 325.M.S.fabricated Common base plate, coupling, couplingguard, foundation bolts etc. as required.Suitable cement concrete foundation duly plasteredand with anti vibration pads.1620 lpm at 70 m Head
229	Jockey Pump125 A, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overloadprotection, current sensing type single phase preventor complete with all acceessories and internal wiringrequired for automatic operation, selector switch for local/remote, auto/manual/OFF operationDiesel Engine ControlControl for diesel engine comprising -Automatic/Manual selctor switch & 3 attempts startingdevice, timers and relays as required, push buttons, start/stop in manual modeIndicating lamp for high/ Low Lub. Oil pressure, HighWater Temp and Engine on indicationBattery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC AmmeterAll standard relays and accessories for automaticoperation of diesel engineSystem Controller Designing, Supply, Installation, Testing andcommissioning of system controller to control operationof main electric fire pump, diesel pump, Pressurizationpump, Terrace pump in sequence as per specificationconsisting of relays, timers. Sensors, annunciationwindow for fault indication, complete as perspecification
230	SITC of fabrication wired made clad dust and water proof mounting main electrixcal panal for main fir pump diesel engine pump & one no jockey pump with starter switch selector voltrater amp meter and battery charger HRC Type 315 A /415 V Main Swich Eangine Cantrole relay 60/75 with timer single phage prevant LED Induction Lamd etc.
231	SITC automatic primlug arrangment for all fire pumps including nesessary pipe filling water level controler 1 hp auto starter gate valve hrvs etc complete
232	RAINWATER HARVESTINGRECHARGE WELLEarth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.In all kind of soil upto 1.5m depth
233	Earth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.In all kind of soil upto 1.5m to 3.0m. Depth
234	Earth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.In all kind of soil upto 3.0m to 4.5m. Depth
235	Earth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.In all kind of soil upto 3.0m to 4.5m. Depth
236	Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors.
237	M-150 brick work in 1:4 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
238	R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Slab and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and Excluding necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200.
239	P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
240	15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 4 Coarse sand
241	Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:With 20x20mm square bar
242	Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.M.D. -10- Circular shape 560mm internal diameter
243	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-incharge, upto 90 metre depth below ground level. Drilling of 300mm dia bore hole manually.
244	Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia
245	Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
246	Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
247	Supplying, filling, spreading & leveling coarase sand of size range 1.5 mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.
248	Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge.
249	Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
250	DESILTING CHAMBEREarth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.In all kind of soil upto 1.5m depth
251	Earth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.In all kind of soil upto 1.5m to 3.0m. Depth
252	Earth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.In all kind of soil upto 3.0m to 4.5m. Depth
253	Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors.
254	M-150 brick work in 1:4 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
255	R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Slab and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200.
256	P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
257	15mm cement plaster on rough side of single or half brick wall mix 1:4 (1 cement : 4 coarse sand)
258	Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:With 20x20mm square bar
259	Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.Rectangular shape 900x600 mm internal dimension.
260	Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
261	DRAINAGE NETWORKConstructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
262	Excavating trenches in all kinds of soil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m.up to 1.50 m depthPipes 80 mm to 300 mm diameter
263	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150mm diameter
264	Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.150mm diameter
265	PUMP ROOM & UNDER GROUND TANKEarth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.All kinds of soil
266	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
267	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
268	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
269	Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.
270	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
271	Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.
272	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinthlevel up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources).
273	Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.
274	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinthlevel up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources).
275	Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
276	Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (TMT Bars) Fe-500
277	Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in :
278	Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in superstructure above plinth level up to floorV level
279	15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
280	15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)
281	Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
282	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone of size 12.5mm nominal size) laid in one layer finished with floating coat of neat cement (25mm thick floor)
283	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
284	Providing and fixing glazing in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasket etc. complete asper the architectural drawings and the directions of engineer-in-charge With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm
285	Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer
286	Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm)
287	Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete.
288	Painting with synthetic enamel paint of approved brand and manufactureof required colour to give an even shade : Two or more coats on new work over an under coat of suitableshade with ordinary paint of approved brand and manufacture
289	Providing and laying integral cement based water proofing treatmentincluding preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations: Applying a slurry coat of neat cement using 2.75 kg/sqm ofcement admixed with water proofing compound conformingto IS. 2645 and approved by Engineer-in-charge over the RCCslab including adjoining walls upto 300 mm height includingcleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm
290	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase.
291	Providing and laying water proofing treatment in sunken portion of W.C., bathroom etc, by applying cement slurry mixed with water proofing cement compound consisting of applying :- (a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
292	C.C.ROADConstruction of granular sub-base by providing close graded Materialconforming to specifications, mixing in a mechanical mix plant at OMC,carriage of mixed material by tippers to work site, for all leads & lifts,spreading in uniform layers of specified thickness with motor grader onprepared surface and compacting with vibratory power roller to achieve thedesired density, complete as per specifications and directions of Engineerin-Charge With material conforming to Grade-II (size range 53 mm to0.075 mm ) having CBR Value-25
293	Preparation and consolidation of sub grade with power road roller of 8 to12 tonne capacity after excavating earth to an average of 22.5 cm depth,dressing to camber and consolidating with road roller including makinggood the undulations etc. and re-rolling the sub grade and disposal ofsurplus earthwith lead upto 50 metres.
294	Construction of dry lean cement concrete sub base over a prepared sub gradewith coarse and fine aggregate conforming to IS:383, the size ofcoarse aggregate not exceeding 25 mm, aggregate cement ratio not toexceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture conten tto be determined during trial length construction, concrete strength not tobe less than 10 Mpa at 7 days, mixed in a batching plant, transported tosite, for all leads & lifts, laid with a mechanical paver, compacting with 8-10tonne vibratory roller, finishing and curing etc. complete as per direction of Engineer-in- charge
295	Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/ runways, using cement content as per design mix, using coarsesand and graded stone aggregate of 40 mm nominal size in appropriateproportions as per approved & specified design criteria, providing dowelbars with sleeve/ tie bars wherever required, laying at site, spreading andcompacting mechanically by using needle and surface vibrators, levellingto required slope/ camber, finishing with required texture, including steelform work with sturdy M.S. channel sections, curing, making provision forcontraction/ expansion, construction & longitudinal joints (10 mm wide x50 mm deep) by groove cutting machine, providing and filling joints withapproved joint filler and sealants, complete all as per direction of Engineerin-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars tobe paid separately).Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ lesscement used as per design mix is payable/ recoverable separately. 2 Cement concrete manufactured in automatic batching plant(RMC plant) including transportation to site in transit mixer
296	Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (TMT Bars) Fe-500
297	Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.
298	Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners,etc
299	BOUNDRYWALLExcavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.
300	Providing and laying cement concrete in 1:4:8(1 Cement : 4 Coarce sand : 8graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors. but in 1:4:8 in coarse sand
301	Reinforced cement concrete work in beams, suspended floors, roofs balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, including the cost of centering, shuttering, finishing and excluding reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).
302	Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.
303	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, including cost of centering, shuttering, finishing and excluding reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
304	Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.
305	RCC Work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
306	Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.
307	Mild steel of Reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its waistage Bend, hooks, Binding wire and authorized over lapping shall be measured upto floor two level.
308	Class -150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulus mortar in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms.
309	12 mm cement plaster in single coat on rough side of single or half brick wall for exterior plastering up to floor two level including brick wall level including internal rounded angles chamfers, and / or rounded angles not exceeding 80 mm in girth and finished even and smooth No. extra for mixing any additive. in 1:4
310	Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
311	Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
312	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
313	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
314	Painting with synthetic enamel paint of approved brand and manufactureof required colour to give an even shade : Two or more coats on new work over an under coat of suitableshade with ordinary paint of approved brand and manufacture
315	Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
316	GATEExcavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches.
317	Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 stone ballast 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors. But in 1:4:8 in coarse sand.
318	RCC work in Wall (any thickness) including attached plasters, butteresses,plinth and string courses, fillets,columns,pillars,piers,abutments,post and struts above plinth level upto floor five level including cost of centering, shuttering,finishing and Excluding reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
319	Centering and shuttering including strutting propping etc and removal of form for foundation fotting base of columns etc for mass concrete.
320	RCC work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement -All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
321	Centering and shuttering including strutting propping etc and removal of form for foundation fotting base of columns etc for mass concrete.
322	Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500D or more. (T.M.T Bars) Fe 500
323	15 mm cement plaster in single coat on rought side or single or half brick wall for exterior plastering upto floor two level including bick wall level including internal rounded angle not exceeding 80mm in girth and finished even and smooth number extra for mixing any additive in 1:4
324	Finishing walls with acrylic smooth exterior paint of requried shade New work (two or more coat applied @1.67 ltr per 10sqm over and including priming coat of exterior primer applied @2.2kg per 10sqm
325	Providing and applying with white cement based putty of avg thickness 1mm of approved brand and manufacturer over the plaster wall surface to prepare the surface even and smooth complete.
326	Structural Steel work riveted bolted or velded in built up sections trusses and framed work including cutting Hoisting fixing in position and appliying a priming coat of approved steel primer all complete.
327	Painting with synthetic Enamel Paint of approved brand and manufacturer of required colour to give and even shade: two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer.
328	Supply & Installation of 6 m wide BOOM Barrier with 2 wireless remote & 1 push button, power 200w, Anti collision, speed 1.6-6 Sec, Max arm length 4.5-6 m Complete installation as per engineer in charge
329	GUARD ROOMEarthwork in excavation by mechanical means ( hydraulic excavator)/manual means over areas (exceeding 30cm in depth, 1.5m in width aswell as 10sqm on plan) including getting out and disposal of excavated earth lead uoto 15m and lift upto 1.5m, as directed by Engineer-incharge. All kinds of soil.
330	Excavating, supplying and filling of local earth (including royality) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete.
331	Suppling and filling in plinth with sand under floors, including,watering,ramming,consolidating and dressing complete.
332	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 stone ballast 40 mm nominal size).
333	Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor
334	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinthlevel up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources).
335	Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.
336	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinthlevel up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources).
337	Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs,landings,balconies and access platform.
338	Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500D or more. (T.M.T Bars) Fe 500
339	Brick Work with common burnt clay FPS bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4.
340	Brick Work with common burnt clay FPS bricks of class designation 7.5 in Super Structure above plinth level upto floor 5 level in all shape and size in cement mortar 1:4.
341	Half brick masonry with common burnt clay FPS bricks of class designation 7.5 in Super Structure above plinth level upto floor 5 level in cement mortar 1:3.
342	Providing and laying dam proof course 40mm thick with CC 1:2:4
343	Providing and applying a coat of residual petrolium bitumen of grade of VG 10 of approved quality using 1.7kg per sqm on damp proof course after cleaning the surface with brushes and finally with the Peace of cloth lighltly soaked in kerosene oil (DPC PAINTING)
344	15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
345	12 mm cement plaster on rough side of single or half brick wall of mix: 1:3 (1 cement: 6 coarse sand)
346	12 mm cement plaster on rough side of single or half brick wall of mix: 1:3 (1 cement: 3 coarse sand)
347	Add for plaster drip course/ groove in plastered surface or molding to RCC projections.
348	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone of size 12.5mm nominal size) laid in one layer finished with floating coat of neat cement (25mm thick floor)
349	Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
350	Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
351	Providing and fixing ISI marked flush door shutters conforming to IS:2202(Part 1) decorative type, core of block board construction with frame of first class hard wood and well matched teak 3 ply veneering with vertical grains or cross vents and face veneers on both faces of shutters 35 mm thick(A) single leaf.
352	Providing and fixing glazing in Al door, window, ventilator shutters and partitions etc with EPDM RUBBER/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge with float glass panes of 4 mm thickness (weight not less than 10 kg/sqm)
353	Providing and fixing angle iron frames for doors, windows 40x40X5 rv ilator so f m\|\|_d steel angle sections of size mm, joints mitred andwelded by angle iron 40x40x5 mm or 35x 5 mm flat pieces to the existingT-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming ogat _of approved steelprimer, all complete as per the direction of Engineer-
354	Providing and fixing factory made IS marked steel glazed doors, windows and ventilators, side /top centre hung, with beading and all members such as F7D,F4B, K11 B _ar)d K12 B etc. complete of standard rolled steel sections, joints. fnitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other,fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Z Section
355	Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-1 Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
356	Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete.9.48.1 Fixed to steel windows by welding
357	Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade : New work (W/o or more coats) over and including water thinnable priming coat with cement primer
358	Finishing walls with acrylic smooth exterior paint of requried shade New work (two or more coat applied @1.67 ltr per 10sqm over and including priming coat of exterior primer applied @2.2kg per 10sqm
359	Painting with synthetic Enamel Paint of approved brand and manufacturer of required colour to give and even shade: two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer.
360	Providing and fixing ISI Marked Oxidised MS sliding bolt black finish, (Barrel type) with necessary screws etc complete: 300 x 16 mm
361	Providing and fixing ISI Marked Oxidised MS tower bolt black finish, (Barrel type) with necessary screws etc complete: 300 x 10 mm
362	Providing and fixing ISI Marked Oxidised MS tower bolt black finish, (Barrel type) with necessary screws etc complete: 200 x 10 mm
363	Providing and fixing ISI Marked Oxidised MS handles 125mm
364	Providing and laying integral cement based water proofing (reatmenlincluding Preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations: Applying a slurry coat of neat cement using 2.75 kg/sqm ofcement admixed with water proofing compound conformingto IS. 2645 and approved by Engineer-in-charge over the RCCslab including adjoining walls upto 300 mm height includingcleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm
365	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase
366	CCTV CAMERAP/F of Outdoor Bullet Type IP Camera,4MP IR Night Vision IP66
367	P/F of Outdoor Dome Type IP Camera,4MP IR Night Vision IP66
368	P/F of PTZ IP Camera,25X/30X Optical Zoom,3600 Rotastion, IR Range 150-200m
369	64 Channel NVR with RAID Support
370	Surveillance Grade HDD 10 TB
371	43 Inch LED Monitor
372	CCTV Control Workstation
373	24 Port Managed PoE Switch
374	8 Port Managed PoE Switch
375	6 Core Armoured OFC Cable
376	Outdoor Cat-6 UTP Cable
377	HDPE Pipe/PVC Conduit
378	GI Pipe for Mounting & Protection
379	2 KVA Online UPS
380	PLUMBINGProviding and fixing water closet squatting pan(Indian type W.C. pan) with 100mm sand cast iron P AND S trap 10 lit.low level with PVC flussing cistern, including flush pipe with manually controlled device conforming IS 7231 with all fitting and pictures complete including cutting and making good the walls and floors. for european type W.C pan with white plastic sheet and lid Make Ceera Hindware
381	Providing and fixing washbasin with C.I brackets 15mm CP brass pillar taps 32mm CP brass waste standard pattern including painting and fittings and brackets, cutting and making good walls when required White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tappillar tap.
382	Providing and fixing flexible P.V.C.waste pipe for sink or wash basin including PVC waste fittings complete32mm dia
383	Providing &fxing M.S.holder bat clamps of approved design to sand cast iron/centrifugally cast(Spun)iron S &S pipe embeded in & including cement concrete blocks 10x10x10cm.of 1:2:4 mix(1 cement:2 coarse:4 graded stone aggregate 20mm nominal size),Including cost of cutting holes &making good the walls etc for 100mm dia pipe.
384	Providing &fxing M.S.holder bat clamps of approved design to sand cast iron/centrifugally cast(Spun)iron S &S pipe embeded in & including cement concrete blocks 10x10x10cm.of 1:2:4 mix(1 cement:2 coarse:4 graded stone aggregate 20mm nominal size),Including cost of cutting holes &making good the walls etc for 75mm dia pipe.
385	Providing &fixing cast iron trap of self cleansing design with or without ventarm complete,including cost of cuting &making good the walls &floors100mm inlet &75mm outlet.
386	Providing and fixing on wall face unplasticised Rigid PVC pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion (i) Single socketed pipes.110mm diameter
387	Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4(1cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size)over PVC sheet 1mx1mx400 micron.finished with 12 mm cement plaster 1:3 (1 cement:3 coarse sand)and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.110 mm
388	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised -PVC rainwater pipes by means of 50×50×50mm hard wood plugs,screwed with M.S.screws of requiredlength including cuting brick work and fixing in cement mortar 1:4(1 cement:4 coarse sand)and making good the wall etc.complete.110mm
389	Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
390	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes,having thermal stability for hot &cold water supply,including all CPVC plain & brass threaded fitings,ilc ixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes &fitings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge.Concealed work,including cutting chases and making good the walls etc16 mm dia nominal bore
391	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes,having thermal stability for hot &cold water supply,including all CPVC plain & brass threaded fitings,ilc ixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes &fitings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge.Concealed work,including cutting chases and making good the walls etc20 mm dia nominal bore
392	Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.15 mm dia nominal bore
393	Providing &fixing CP brass bib cock of approved quality conforming to IS 893115 mm dia nominal bore
394	Providing &fixing C.P.brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm dia nominal bore
395	Providing &fixing C.P,brass angle valve for basin mixer and gyser points of approved quality conforming to IS 893115 mm dia nominal bore
396	Providing and fixing ball valve (brass)of approved quality,High or low pressure,with plastic floats complete20 mm dia nominal bore
397	Providing and placing on terrace (at all floor levels)polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arangement and making necessany holes for inlet,outlet and overlow pipes but without fitings and the base support for lank
398	Excavating trenches in all kind of soil of required width for pipes,cables etc.including excavationfor sockels and dressing of sides,ramming of bottoms,depth upto 1.5 m.including geting out the excavated soil &then returning the soil as required,in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming,watering,etc &disposig of surplus excavated soil as directed within a lead of 50mPipes 80mm to 300mm diameter
399	Providing and laying non-pressure NP2 cdlass (light duty)R.C.C.pipes with collars jointed with stiffmixture of cement mortar in the proportion of 1:2 (1 cement:2 fine sand)including testing of joints etc.complete100 mm dia
400	Providing and laying non-pressure NP2 cdlass (light duty)R.C.C.pipes with collars jointed with stiffmixture of cement mortar in the proportion of 1:2 (1 cement:2 fine sand)including testing of joints etc.complete150mm dia
401	Providing &laying cement concrete 1:5:10(1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size)alround S.W. Pipes including bed concrete as per standard design.100 mm dia
402	Providing &laying cement concrete 1:5:10(1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size)alround S.W. Pipes including bed concrete as per standard design.150mm dia
403	Constructing brick masonny manhole in cement mortar 1:4(1 cement :4 oarse sand)RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size),foundation concrete 1:4:8 mix (1 cement:4 coarse sand :8 graded stone aggregate 40mm nominal size)inside plastering.12mm thick with cement mortar 1:3(f cement :3 coarse sand fnished with floating coat fo neat cement and making channels in cement concrete 1:2:4(1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size)finished with a floating coat of neat cement complete as per standard designInside size 9Ox80cms and 45cms deep including Cl cover with frame(light duty)455x610mminternal diamensions total weight of cover and rame to be not less than 38 kg (weight of cover 23 kg and weight offrame 15kg). With FPS bricks of class designation 75For Sewer Line
404	Provide rorange color safety foot rest of mini 600 thk plastic encapsulated as per IS code
405	ELECTRICALWirng for light point/fan point exhaust fan point call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface /recessed medium glass PVC conduit,with modular switch,modular plate, suitable G!box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc.as requiredGROUP C
406	Wring for circuit submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor,single core cable in surface/recessed medium class PVC conduit as required.2X1.5sq.mm+1X1.5 sq.mm earth wire
407	Wring for circuit submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor,single core cable in surface/recessed medium class PVC conduit as required.4X6sq.mm+2X6sq.mm earth wire
408	Supplying and fxing following rating,four pole,415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required.40 A
409	Supply of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 66 and above protection complete in all respect
410	Supply of LED Tube Light with batten suitable for up to 1X20 watt LED tube light fitting including tube on Surface complete in all respect
411	Supply of ceiling fans BEE 5 Star rated-1200mm sweep with fan motor of A.C permanent insulation,capacitor rating confirming BEE 5 star rating and IS:374/79 and also comply with is:1709/1984 with latest amendment.The rated voltge 220/240 volts,50Hz,1-ph AC the fan assemble should consists of down rod blades,shackle canopies etc and with double ball bearing
412	Supplying of Heavy duty capacitor start single phase ISl marked 300 mm dia Single Phase Industrial duty (Propeller Type Exhaust ventilating Fans)4 pole 1500 rpm exhaust fan having powerconsumption of 100 w or below and airflow of 6800 CMH and noise level below 65 dB but without regulator complete with louver,bird screen etc.and with 3 core flexible wire lead as
413	TOILET BLOCKEarthwork in excavation by mechanical means ( hydraulic excavator)/manual means over areas (exceeding 30cm in depth, 1.5m in width aswell as 10sqm on plan) including getting out and disposal of excavated earth lead uoto 15m and lift upto 1.5m, as directed by Engineer-incharge. All kinds of soil.
414	Excavating, supplying and filling of local earth (including royality) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete.
415	Suppling and filling in plinth with sand under floors, including,watering,ramming,consolidating and dressing complete.
416	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 stone ballast 40 mm nominal size).
417	Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor
418	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinthlevel up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources).
419	Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.
420	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinthlevel up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources).
421	Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs,landings,balconies and access platform.
422	Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500D or more. (T.M.T Bars) Fe 500
423	Brick Work with common burnt clay FPS bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4.
424	Brick Work with common burnt clay FPS bricks of class designation 7.5 in Super Structure above plinth level upto floor 5 level in all shape and size in cement mortar 1:4.
425	Half brick masonry with common burnt clay FPS bricks of class designation 7.5 in Super Structure above plinth level upto floor 5 level in cement mortar 1:3.
426	Providing and laying dam proof course 40mm thick with CC 1:2:4
427	Providing and applying a coat of residual petrolium bitumen of grade of VG 10 of approved quality using 1.7kg per sqm on damp proof course after cleaning the surface with brushes and finally with the Peace of cloth lighltly soaked in kerosene oil (DPC PAINTING)
428	15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
429	12 mm cement plaster on rough side of single or half brick wall of mix: 1:3 (1 cement: 6 coarse sand)
430	12 mm cement plaster on rough side of single or half brick wall of mix: 1:3 (1 cement: 3 coarse sand)
431	Add for plaster drip course/ groove in plastered surface or molding to RCC projections.
432	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone of size 12.5mm nominal size) laid in one layer finished with floating coat of neat cement (25mm thick floor)
433	Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
434	Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
435	Providing and fixing ISI marked flush door shutters conforming to IS:2202(Part 1) decorative type, core of block board construction with frame of first class hard wood and well matched teak 3 ply veneering with vertical grains or cross vents and face veneers on both faces of shutters 35 mm thick(A) single leaf.
436	Providing and fixing glazing in Al door, window, ventilator shutters and partitions etc with EPDM RUBBER/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge with float glass panes of 4 mm thickness (weight not less than 10 kg/sqm)
437	Providing and fixing angle iron frames for doors, windows 40x40X5 rv ilator so f m\|\|_d steel angle sections of size mm, joints mitred andwelded by angle iron 40x40x5 mm or 35x 5 mm flat pieces to the existingT-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming ogat _of approved steelprimer, all complete as per the direction of Engineer-
438	Providing and fixing factory made IS marked steel glazed doors, windows and ventilators, side /top centre hung, with beading and all members such as F7D,F4B, K11 B _ar)d K12 B etc. complete of standard rolled steel sections, joints. fnitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other,fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Z Section
439	Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-1 Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
440	Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete.9.48.1 Fixed to steel windows by welding
441	Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade : New work (W/o or more coats) over and including water thinnable priming coat with cement primer
442	Finishing walls with acrylic smooth exterior paint of requried shade New work (two or more coat applied @1.67 ltr per 10sqm over and including priming coat of exterior primer applied @2.2kg per 10sqm
443	Painting with synthetic Enamel Paint of approved brand and manufacturer of required colour to give and even shade: two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer.
444	Providing and fixing ISI Marked Oxidised MS sliding bolt black finish, (Barrel type) with necessary screws etc complete: 300 x 16 mm
445	Providing and fixing ISI Marked Oxidised MS tower bolt black finish, (Barrel type) with necessary screws etc complete: 300 x 10 mm
446	Providing and fixing ISI Marked Oxidised MS tower bolt black finish, (Barrel type) with necessary screws etc complete: 200 x 10 mm
447	Providing and fixing ISI Marked Oxidised MS handles 125mm
448	Providing and laying integral cement based water proofing (reatmenlincluding Preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations: Applying a slurry coat of neat cement using 2.75 kg/sqm ofcement admixed with water proofing compound conformingto IS. 2645 and approved by Engineer-in-charge over the RCCslab including adjoining walls upto 300 mm height includingcleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm
449	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase
450	PLUMBINGProviding and fixing water closet squatting pan(Indian type W.C. pan) with 100mm sand cast iron P AND S trap 10 lit.low level with PVC flussing cistern, including flush pipe with manually controlled device conforming IS 7231 with all fitting and pictures complete including cutting and making good the walls and floors.Same as above but for european type W.C pan with white plastic sheet and lid Make Ceera Hindware
451	Providing and fixing washbasin with C.I brackets 15mm CP brass pillar taps 32mm CP brass waste standard pattern including painting and fittings and brackets, cutting and making good walls when required White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tappillar tap.
452	Providing and fixing flexible P.V.C.waste pipe for sink or wash basin including PVC waste fittings complete32mm dia
453	Providing &fxing M.S.holder bat clamps of approved design to sand cast iron/centrifugally cast(Spun)iron S &S pipe embeded in & including cement concrete blocks 10x10x10cm.of 1:2:4 mix(1 cement:2 coarse:4 graded stone aggregate 20mm nominal size),Including cost of cutting holes &makinggood the walls etcfor 100mm dia pipe.
454	Providing &fxing M.S.holder bat clamps of approved design to sand cast iron/centrifugally cast(Spun)iron S &S pipe embeded in & including cement concrete blocks 10x10x10cm.of 1:2:4 mix(1 cement:2 coarse:4 graded stone aggregate 20mm nominal size),Including cost of cutting holes &makinggood the walls etcfor 75mm dia pipe.
455	Providing &fixing cast iron trap of self cleansing design with or without ventarm complete,including cost of cuting &making good the walls &floors100mm inlet &75mm outlet.
456	Providing and fixing on wall face unplasticised Rigid PVC pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion (i) Single socketed pipes.110mm diameter
457	Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4(1cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size)over PVC sheet 1mx1mx400 micron.finished with 12 mm cement plaster 1:3 (1 cement:3 coarse sand)and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.110 mm
458	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised -PVC rainwater pipes by means of 50×50×50mm hard wood plugs,screwed with M.S.screws of requiredlength including cuting brick work and fixing in cement mortar 1:4(1 cement:4 coarse sand)and making good the wall etc.complete.110mm
459	Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
460	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes,having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fitings,ilc ixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes &fitings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work,including cutting chases and making good the walls etc16 mm dia nominal bore
461	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes,having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fitings,ilc ixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes &fitings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work,including cutting chases and making good the walls etc20 mm dia nominal bore
462	Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.15 mm dia nominal bore
463	Providing &fixing CP brass bib cock of approved quality conforming to IS 893115 mm dia nominal bore
464	Providing &fixing C.P.brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm dia nominal bore
465	Providing &fixing C.P,brass angle valve for basin mixer and gyser points of approved quality conforming to IS 893115 mm dia nominal bore
466	Providing and fixing ball valve (brass)of approved quality,High or low pressure,with plastic floats complete20 mm dia nominal bore
467	Providing and placing on terrace (at all floor levels)polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arangement and making necessany holes for inlet,outlet and overlow pipes but without fitings and the base support for lank
468	Excavating trenches in all kind of soil of required width for pipes,cables etc.including excavationfor sockels and dressing of sides,ramming of bottoms,depth upto 1.5 m.including geting out the excavated soil &then returning the soil as required,in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming,watering,etc &disposig of surplus excavated soil as directed within a lead of 50m.Pipes 80mm to 300mm diameter
469	Providing and laying non-pressure NP2 cdlass (light duty)R.C.C.pipes with collars jointed with stiffmixture of cement mortar in the proportion of 1:2 (1 cement:2 fine sand)including testing of joints etc.complete100 mm dia
470	Providing and laying non-pressure NP2 cdlass (light duty)R.C.C.pipes with collars jointed with stiffmixture of cement mortar in the proportion of 1:2 (1 cement:2 fine sand)including testing of joints etc.complete150mm dia
471	Providing &laying cement concrete 1:5:10(1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size)alround S.W. Pipes including bed concrete as per standard design.100 mm dia
472	Providing &laying cement concrete 1:5:10(1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size)alround S.W. Pipes including bed concrete as per standard design.150mm dia
473	Constructing brick masonny manhole in cement mortar 1:4(1 cement :4 oarse sand)RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size),foundation concrete 1:4:8 mix (1 cement:4 coarse sand :8 graded stone aggregate 40mm nominal size)inside plastering.12mm thick with cement mortar 1:3(f cement :3 coarse sand fnished with floating coat fo neat cement and making channels in cement concrete 1:2:4(1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size)finished with a floating coat of neat cement complete as per standard design Inside size 9Ox80cms and 45cms deep including Cl cover with frame(light duty)455x610mm internal diamensions total weight of cover and rame to be not less than 38 kg (weight of cover 23 kg and weight offrame 15kg). With FPS bricks of class designation 75 For Sewer Line
474	Provide rorange color safety foot rest of mini 600 thk plastic encapsulated as per IS code
475	ELECTRICALWirng for light point/fan point exhaust fan point call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface /recessed medium glass PVC conduit,with modular switch,modular plate, suitable G!box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc.as requiredGROUP C
476	Wring for circuit submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor,single core cable in surface/recessed medium class PVC conduit as required.2X1.5sq.mm+1X1.5 sq.mm earth wire
477	Wring for circuit submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor,single core cable in surface/recessed medium class PVC conduit as required.4X6sq.mm+2X6sq.mm earth wire
478	Supplying and fxing following rating,four pole,415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required.40 A
479	Supply of water tight oblong 10 Watt LED bulkheadluminaire with driver set confirming to IP 66 and above protection complete in all respect
480	Supply of LED Tube Light with batten suitable for up to 1X20 watt LED tube light fitting including tube on Surface complete in all respect
481	Supplying of Heavy duty capacitor start single phase ISl marked 300 mm dia Single Phase Industrial duty (Propeller Type Exhaust ventilating Fans)4 pole 1500 rpm exhaust fan having powerconsumption of 100 w or below and airflow of 6800 CMH and noise level below 65 dB but without regulator complete with louver,bird screen etc.and with 3 core flexible wire lead as
482	HORTICULTUREEarthwork in excavation over areas (30 cm in depth) including disposal of excavated earth lead upto 50m and lift upto 1.5m disposed earth to be levelled and neatly dressed all kind of soil.
483	Supplying & filling/ spreading gardenloam soil upto 300mm in depth
484	Cleaning, clearing the stonechips & unwanted materials,dweeding, and making the surface clean.
485	Supplying & planting korean/ mexican grass by dibbling method including supply and mixing manners, waterring etc. complete
486	Supplying & planting korean grass by turfing method including preparation of base, supply and mixing manures, watering etc complete.
487	Supplying & planting doob grass by dibbling method including supply and mixing manners, waterring etc.complete
488	Supplying & planting different types of flowering trees (Height of tree - 8' -10', at the time of plantation)including pit making & supply mixing and spreading of good earth and manuring, watering. ( Tree varities: Cossia fistula, Caselpania pulcherima, Delonix regia, Alastonia Scholaris, Jacaranda minusofia, Spathoden campalata, mimusops elengi)
489	Supplying & planting Palms tree (Cycas revolunta) (width- approx. 1½' at the time of plantation) including pit making & supply mixing and spreading of good earth and manure, watering.
490	Supplying & planting matured Royal Palms tree including pit making & supply mixing and spreading of good earth and manure, watering.
491	Supplying and planting Weeping debdaru [Polyalthia longifolia, ht- 6'-7'] including pit making & supply, mixing,spreading of good earth and manuring, watering.
492	Supplying & planting different types of bamboos (heights 8'-10\\") including pit making, supply, mixing and spreading of good earth and manure, watering etcVarieties of bamboo: a) Muli Bamboo b) Gati bamboo c)Varigated bamboo c) Buddha bamboo
493	Supplying & planting different types of foliage & flowering shrubs (height- 2'-3\\") including pit making, supply,mixing and spreading of good earth and manure,watering etc.
494	Supplying & planting different types of colourful edge plants / ground covers including pit making, supply,mixing and spreading of good earth and manure,watering etc.
495	Supplying and planting flowering creepers including pit making, supply, mixing and spreading of good earth and manure, watering etc.
496	Supplying & planting full matured ornamental trees (height- 10'-12\\") (Brownea Arisa/ Brownea Macrophylla/Magnolia Grandi Flora/ Vustavia Augusta) including pit making, Supply, mixing and spreading of good earth and manure, watering etc.
497	DRAINEarth work in excavation
498	P.C.C. 1:4:8
499	Brick work in 1:4 in foundation.
500	15 mm cement plaster on plinth of mix : 1:4 (1 cement: 4 coarse sand). F.M.-2.25

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Dios Office Building In District- Agra (U.P), Agra-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Dios Office Building In District- Agra (U.P), Agra-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us