|
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete a Narrow Foundations - First Depth Upto 2m |
| 2 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 3 | Centering for Bed block, Lintel, Beam, Slab and Staircase slab plain surface including struttingslabs plain surface including strutting etc., complete cost and conveyanceof all materials to site and all labourcharges etc., complete. |
| 4 | Supply and fixing of 600mmX600mm Square RCC manhole cover with frame SFRC pipe IS 12592 |
| 5 | Reinforced Cement concrete 1:1.5 :3 (one cement, one & half M.sand and three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. |
| 6 | Supplying, fabrication and placing in position of steel reinforcement using mild steel of Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wore and all labour charges for cutting, bending & tying etc., complying with standard specifications - 1 Quintal |
| 7 | Fly ash Brick work in CM 1:5 (one cement & five sand) using size 9\\"X4 3/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 8 | Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 9 | Plastering with C.M. 1:5 Mix (one cement and five sand) 12mm thick finishing including cost and conveyance of all materials to site and all labour charges, watering curing and all other incidental charges etc., complete complying with standard specification. |
| 10 | Supply and fixing of mild steel for Trusses and record rocks using all round angle with necessary arrangements including cost of steel and labour charges for welding etc., complete |
| 11 | Roofing with Pre painted Galavalume sheet 0.47mm thick with necessary bolt and nuts and washers including allmaterials and labour charges etc complete - 10m2 |
| 12 | Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc,complete as per standard specification. (Sl.No.394) |
| 13 | Painting over old iron works for doors,windows,grills for door ,windows,grills,weldmesh ets. |
| 14 | Towards charges for Repairing 20litre Tilting Grinder completed as per standard specifications |
| 15 | Towards charges for Repairing Water Doctor Filter, CP Tap etc completed as per standard specifications |
| 16 | Towards charges for Repairing gasstove, regulator,gastube,burners etc completed as per standard specifications |
| 17 | Providing and Applying high perfomance solar reflective & Acrylatesilicon based Waterproofing coating which is single component, cold applied, water based acrylic and UVresistant water proofing treatment to the Existing Roofscreed surface applied @ 1.5 l/m2 in 3 coats to achieve1mm DFT, having tensile strength 2N/ mm2 confirming to ASTM D 412; Elongation at break ≥ 200%, Abrasion resistance 21mg confirming to ASTM D 4060 and Crack bridging ability up to 2 mm, including surface preparation, priming the surface with 1 coat diluted with water in the ratio 2:1 spreading @ 0.125 L/m2 asself-priming coat in the SSD condition and spreading 45 gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwiched between the first and second oatCompletely as perspecification. The finished cost to include surface preparation, making coving at Junction, treatment of cracks completely as per specification. |
| 18 | Supply and run of 4 x6 sq.mm. PVC Insulated copper cable (7/20) run of mains for service connection. Etc. complete. |
| 19 | Wiring with 2x1.5 sq.mm (22/.3) PVC insulated unsheathed Sc.Cu. conductor of 1100v grade in suitable pvc rigid pipe on wall and ceiling with pvc accessories with TW switch box with 5A.F.T. switch inflush with all covered with hylem sheet of 3mm thick with painting of suitable colour for open pvc light point/fan point (SD 20) |
| 20 | Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting |
| 21 | Supply and fixing of 1200mm(48\\") sweepAC ceiling fan complete with stepped electronic300W regulator with1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\") SD 106 |
| 22 | Supply and fixing of WT Bulk head fitting with guard ( Philips / Bajaj / Crompton / K.lite ) suitable for incandescent lamp with 60 watts bulb. ( SD 83) |
| 23 | Supplying and fixing of 20mm Brass Tap J type including all labour charges completed |
| 24 | Supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting . |
| 25 | Supply and fixing of 450mm(18\\")sweep(lightduty) Ac Exhaust fan complete with necessary wall opening and making good of the wall |
| 26 | Supply and Delivery of HDPE Tank as per IS 12701 / 1996 including Loading, Unloading, Transportation and Labour Charges for Fixing of the GI pipes and Specials for Pipe Connection works including Citting, Threading and Fixing Charges Etc., Complete |
| 27 | Supply and fixing of following Plumbing G.I.materials as directed by Corporation officers. |
| 28 | 25mm upvc pipe |
| 29 | 25mm UPVC Elbow |
| 30 | 25mm UPVC Tee |
| 31 | 25mm dia valve |
| 32 | 25mm upvc coupling |
| 33 | 25mm pvc tap |
| 34 | Supply and Fixing of Stainless steel handrails including all labour charges as per Standard Quality as per the Direction of the Departmental officers etc., complete. |
| 35 | Supply of Amma Unavagam Kitchen utensils |
| 36 | Annakoodai |
| 37 | SS FOOD CONTAINER |
| 38 | SS BUCKET Plate |
| 39 | SS Vaali |
| 40 | Rice Annakarandi |
| 41 | Sambar Karandi 9\\" |
| 42 | Sambar Karandi 7\\" |
| 43 | HAWKINS COOKER BIG BOY 14LTR |
| 44 | GRAND CHOPPER (knife) |
| 45 | BUCKET |
| 46 | SS GLASS |
| 47 | LPG HOSE |
| 48 | Supply and fixing of fixing including necessary materials and labour charges etc completed as per standard specification Please Enable Macros to View BoQ information |
