|
| 1 | Providing & Fixing Hi-Acoustic Fabric Wall Panel, Acoustics Sound Absorption Panels, Rockwool/ Glasswool, German Pine, Room Acoustics & Sound proofing acoustic panels of approved colour as per Engineer Incharge with 25mm thick stretch half wrap/ full wrap rigid vinyl tracks to be fix on existing surface with pvc insert and screws as required pattern in panel as required module. 25mm thick acoustic rockwool/glasswool pad of 100kg density to be fill in panel fixed by rubber adhesive approved Hi quality fabric to be grip in stretch track by tucking tools to make panel in proper line and level along with wrinkle free. The stretch track create V groove / Butt joint in each panel size 2' x 3' x 2\\" having Noise Reduction Coefficient (NRC) rating :0.80 - 0.90, Suppress flutter echoes and control noise to ensure clear and balanced audio, 2 inch thickness with 1 inch air gap, helps isolate the room well all complete job. Fabric to be selected from standard shade card. Make:- Ecotone, Armstrong, MMT-Acoutix or equivalent, sample approved by architects or Engg. In-Charge. |
| 2 | Providing & Fixing approved Fabric with UPVC Stretched fabric panel system wit continuous perimeter track profile mounted on directly to the substrate. perimeter track profile required to confirm to panel edge details. Panel jointshall be butt, radius or as approved. System shall provide for face fabric to be perfectly tensioned over core materials, leaving fabric floating over core surface. System will allow for the removal and replacement of fabric facing from individual panels. Removal of fabric shall allow access to surface behind fabric without dismantling, removal or replacement of track members or core. Fabric paneling have stitching of matching colour on all sides as per design , back side GI stud 50mm 0.55 mm thick pressed section i.e cross channel arefastened . The Polyester Wadding of 50 mm thickness having density 1500 gsm |
| 3 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominalsize) |
| 4 | 12 mm cement plaster (1:4) in walls |
| 5 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 6 | All kinds of soil @60% |
| 7 | Ordinary Rock @40% |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 10 | Foundations, footings, bases of columns etc. for mass concrete. |
| 11 | Providing and fixing MS Gril of 20mm Thick Square Bar over the compound wall of approved design as per Engineer Incharge |
| 12 | Painting steel work with Deluxe multi surface paint of required shade to give an even shade. Two or more coats applied of approved brand and manufacture. |
| 13 | Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface. Please Enable Macros to View BoQ information |
