|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 2 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 3 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 4 | 1:6 (1 cement: 6 fine sand) DSR 13.1.2 |
| 5 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : DSR 17.3 |
| 6 | W.C. pan with ISI marked white solid plastic seat and lid DSR 17.3.1 |
| 7 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: DSR 17.7 |
| 8 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3 |
| 9 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10 |
| 10 | Kitchen sink without drain board DSR 17.10.2 |
| 11 | 610x460mm bowl depth 200 mm DSR 17.10.2.2 |
| 12 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28 |
| 13 | Flexible Pipe DSR 17.28.2 |
| 14 | 32 mm dia DSR 17.28.2.1. |
| 15 | 40 mm dia DSR 17.28.2.2 |
| 16 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR 17.60 |
| 17 | 100 mm inlet and 75 mm outlet DSR 17.60.2 |
| 18 | Sand cast iron S&S as per IS : 3989 DSR 17.60.2.1 |
| 19 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.: DSR 18.10 |
| 20 | 15 mm dia. nominal bore DSR 18.10.1 |
| 21 | 20 mm dia. nominal bore DSR 18.10.2 |
| 22 | P/F of Gun-Metal Peat Valve complete in all respect DSR 18.17 |
| 23 | size 15mm i/d (NSR) |
| 24 | size 20mm i/d (DSR 18.17.1A ) |
| 25 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 26 | 30 cm length DSR 18.21.1 |
| 27 | 15 mm nominal bore DSR 18.21.1.1 |
| 28 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46 |
| 29 | 15 mm nominal bore DSR 18.46.1 |
| 30 | 20 mm nominal bore DSR 18.46.2 |
| 31 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48 |
| 32 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : DSR 18.49 |
| 33 | 15 mm nominal bore DSR 18.49.1 |
| 34 | Providing and fixing C.P. brass long body bib cock of approved quality. DSR 18.51 |
| 35 | 15 mm nominal bore DSR 18.51.1 |
| 36 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. DSR 18.52 |
| 37 | 15 mm nominal bore. DSR 18.52.1 |
| 38 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 DSR 18.53 |
| 39 | 15 mm nominal bore DSR 18.53.1 |
| 40 | Providing and fixing of Extension nippple upto 1-1/2\\" length DSR 18.53A |
| 41 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62 |
| 42 | 20 mm nominal bore, DSR 18.62.2 |
| 43 | Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76 |
| 44 | With common burnt clay F.P.S. (non modular) bricks DSR 18.76.1 |
| 45 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. DSR 18.78 |
| 46 | Construction of Curb consisting of cement concrete 1:2:4 including cost of C.P. hinged grating and cost of sand bajri etc. |
| 47 | Prov. & fixing 550x 400 mm beveled edge mirror of superiorglass (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass of approved make |
| 48 | Providing and fixing of C.P. cup heavy duty of approved make |
| 49 | Providing and fixing GI Tank Nipple 15 mm dia complete |
| 50 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" i/d of approved make |
| 51 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal |
| 52 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 53 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 54 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 55 | Dismantling of Old material, not reuseable, including GI / HCI Pipe & Specials, Faucets, Ceramic Fixtures, PVC tanks & allied items and disposal of malba including that of chase from site to a approved dumping site complete. |
| 56 | Conversion for OWC to EWC with 4\\" C.I.H.R bend, 4\\" PVC collar 1 No 4\\" PVC pipe of 4kg pressure upto 1'-6\\" long including dismantling of OWC pan and floor and repair of flooring to its original complete in all respect . |
| 57 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make |
| 58 | Providing and fixing of SFRC I.C cover & frame 600x 600mmx 35 mm Please Enable Macros to View BoQ information |
