|
| 1 | S&F in repairs PVC lid for poly water storage tanks of capacity 500/1000 litres including PVC hinges and PVC locking both complete all as specified and as directed by Engineer-in-charge. |
| 2 | Cleaning and removing all scale and dirt, etc., from tanks and mouth of circulating pipe etc. including refixing in position after cleaning exc. 500 & n. exc. 1000 litres capacity of tank complete all as specified and as directed by Engineer-in-charge. |
| 3 | Disconnecting existing tanks n exc 1000 lit , setting aside and reconnecting and re-fixing tanks in position with all necessary fittings and fixtures complete all as specified and as directed by Engineer-in-charge. |
| 4 | S&F in repairs 20 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and as directed by Engineer-in-charge. |
| 5 | S&F in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 142gms) complete all as specified and as directed by Engineer-in-charge. |
| 6 | Labour only for opening of air locks in toilets /baths and kitchen water pipe line but excluding fittings .complete all as specified and as directed by Engineer-in-charge. |
| 7 | S&F in repairs brass spindel of 15mm size/ type and in any position complete all as specified and as directed by Engineer-in-charge. |
| 8 | S&F Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore brass stop cock, high pressure with crutch or butterfly handle etc complete including dismantling existing water tank complete all as specified and as directed by Engineer-in-charge.Make:- Make: Cat No. HSWS-0050-02-Pure of M/s Sintex |
| 9 | S&F Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore brass stop cock, high pressure with crutch or butterfly handle etc complete including dismantling existing water tank complete all as specified and as directed by Engineer-in-charge.Make:- Make: Cat No. HSWS-0100-01-Pure of M/s Sintex |
| 10 | S & F 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-charge. |
| 11 | S & F 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-charge. |
| 12 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing complete all as specified and as directed by Engineer-in-charge. |
| 13 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing complete all as specified and as directed by Engineer-in-charge. |
| 14 | M&L Cutting chases pinning in brick work for concealed water tubing etc. and making good to facings where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth .complete all as specified and as directed by Engineer-in-charge. |
| 15 | S&F in repairs vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including P-trap (PVC) 100 mm dia., connection to flushing pipe, anti-syphonage pipe complete including making good to floor complete all as specified and as directed by Engineer-in-charge. |
| 16 | S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) white including trap, connection to drain (outgoing pipe) and to flushing pipe, anti-syphonage pipe, and plastic water closet seat of white in colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed by Engineer-in-charge. |
| 17 | S&F in repairs white Table top Basin (self-rimming) Oval shape of size 635mm X 410X 120mm fixed in position including waste coupling and PVC waste pipe, 32mm dia complete all as specified and as directed by Engineer-in-Charge.Make: Cat Part No: LYS WHT 38931 model JAGUAR |
| 18 | S&F in repairs vitreous china wash hand basin white of bowl size 550mm x 440mm including waste coupling and PVC waste pipe 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy type for 15 mm bore pipe, including M S brackets complete all as specified and as directed by Engineer-in-charge. |
| 19 | S&F in repairs Vitreous china Urinal, Half stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including Cp Urinal spreader for fixing with 15 mm dia pipe complete all as specified and as directed by Engineer-in-charge. |
| 20 | S&F in repairs 600mmx450mm beveled edge looking mirror of selected quality glass of thickness not less than 5.50mm, etched desined corners, fixed to wall with 12mm dia spacers at each corners complete all as specified and as directed by Engineer-in-Charge. |
| 21 | S&F in repairs Flushing Cistern Kit for existing 10 lit capacity PVC Flush tanks complete all as specified and as directed by Engineer-in-charge. |
| 22 | S&F in repairs 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and as directed by Engineer-in-charge. |
| 23 | S&F in repairs PVC connection 15mm bore size with two nuts and washers of PTMT, of length 450mm complete all as specified and as directed by Engineer-in-charge. |
| 24 | S&F PVC connection 15mm bore size with two nuts and washers of PTMT of length 600mm complete all as specified and as directed by Engineer-in-charge. |
| 25 | S&F in repairs Cabinet mirror plastic body for toilet of size 450mm x 600mm with 4mm thick looking mirror complete all as specified and as directed by Engineer-in-charge. |
| 26 | S&F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm x 203 mm, bowl size 405mm x 354mm x 203mm complete all as specified and as directed by Engineer-in-charge. |
| 27 | S&F in repairs Sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes cappling, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size405mm x 460mmx 203mm, bowl size 405mm x 354mm x 203mm complete all as specified and as directed by Engineer-in-charge. |
| 28 | S&F in repairs stainless steel plate rack of size 609mm X 609 X 254 mmcomplete all as specified and as directed by Engineer-in-charge. |
| 29 | S&F in repairs glass shelf 450mm X 150mm X 8 mm thick with chromium plated railing fixed with and including chromium plated brackets complete all as specified and as directed by Engineer-in-charge. |
| 30 | S&F in repairs corner glass shelf of size 200mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed by Engineer-in-charge.. |
| 31 | S&F in repairs vitreous single piece wash down rimless WC inbuilt jet with PP soft close seat cover, hinges, fixing300mm, flushing cistern with fittings complete all as specified and as directed by Engineer-in-charge.Make:- Jaquar Cat No. ONS-WHT-10853S300UFSM |
| 32 | S&F in repairs stainless steel peg set of five pegs, fixed/welded/soldered on stainless steel base plate of size 300mmx30mmx2.5 mm and fixed with stainless steel screws, rowel plugs complete all as specified and as directed by Engineer-in-charge. |
| 33 | S&F in repairs hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. 1 metre long flexible tube and wall hook including connections and fixed in position complete all as specified and as directed by Engineer-in-charge. |
| 34 | S&F in repairs brass Chromium plated soap dish , fixed to wall with CP brass screws complete all as specified and as directed by Engineer-in-charge.Make:- Jaquar Cat No.ACN-1131N |
| 35 | S& F PTMT Shelf of Size 450mm long complete all as specified and as directed by Engineer-in-charge. Make : prayag / Polytuf |
| 36 | S&F in repairs Brass Chromium plated towel rail complete all as specified and as directed by Engineer-in-charge.Make:- Jaquar Cat No. ACN-1111SM |
| 37 | S&F in repairs Brass Chromium plated towel ring complete all as specified and as directed by Engineer-in-charge.Make:- Jaquar Cat No. ACN-1121 BN |
| 38 | S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-charge. |
| 39 | S&F in repairs Pillar taps Swan Neck quarter turn suitable for 15mm bore pipe fancy type brass CP screwed for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-charge.Make:- Jaquar Cat No. FUS CHR 29001 |
| 40 | S&F in repairs Pillar tap quarter turn suitable for 15mm bore pipe fancy type brass CP screwed for iron pipe or brass ferrulecomplete all as specified and as directed by Engineer-in-charge. |
| 41 | S&F in repairs wall mixer brass chromium plated quarter turn 2 in 1 with bend pipe with provision for over head shower with bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed by Engineer-in-charge.Make:- Jaquar Cat No. CQT CHR 23219 |
| 42 | S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed by Engineer-in-charge. |
| 43 | S&F in repairs cast copper alloy chromium plated fancy type central hole basin mixer with popup waste system with 450 mm long braided hoses capstan head for high pressure suitable for 15mm bore pipe complete all as specified and as directed by Engineer-in-charge.Make:- Jaquar Cat No. FUS CHR 209023 B |
| 44 | S&F in repairs angle cock quarter turn with flange chromium plated cast copper alloy screwed down complete all as specified and as directed by Engineer-in-charge. |
| 45 | S&F in repairs Two Way (2 in 1) bib taps with wall flange quarter turn suitable for 15mm bore pipe fancy type brass CP, screwed for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-charge. |
| 46 | S&F in repairs cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make:- Jaquar Cat No. SHA SSF 475L 280 |
| 47 | S&F in repairs brass chromium plated shower rose 100 mm size square (without arm) with swivel joints including fixing with arm/ pipe complete all as specified and as directed by Engineer-in-charge. Make:- Jaquar Cat No. OHS CHR 1989 |
| 48 | S&F in repairs Toilet paper holder of stainless steel complete all as specified and as directed by Engineer-in-charge.Make:- Jaquar Cat No. AKP CHR 35757 P |
| 49 | S & F in repairs to 15mm CP Stop valve of Concealed Type any colour highpressure screwed for iron pipe and fixed complete all as specified and as directed Make:- Jaquar Cat No. LYR CHR 38083 K |
| 50 | S&F in repairs bib tap standard of PTMT any colour 15 mm bore minimum weight 90 gram ISI Marked complete all as specified and as directed by Engineer-in-charge. |
| 51 | S&F in repairs stopcock standard of PTMT any colour 15 mm bore minimum weight 90 gram ISI Marked.complete all as specified and as directed by Engineer-in-charge. |
| 52 | S&F in repairs 15 mm bore Stop valves/gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed by Engineer-in-charge. |
| 53 | S&F in repairs 20 mm bore Stop valve/ gate valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed by Engineer-in-charge. |
| 54 | S&F in repairs 32 mm bore PVC flexible pipe for wash hand basin complete all as specified and as directed by Engineer-in-charge. |
| 55 | S&F in repairs waste fittings, brass, chromium plated for glazed ware sink/basin etc, size 32mm with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engineer-in-charge. |
| 56 | S&F in repairs waste fittings, brass,chromium plated for glazed ware sink/basin etc, size 40mm with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engineer-in-charge. |
| 57 | S&F in repairs 100mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and as directed by Engineer-in-charge. |
| 58 | S&F in repairs grating round 100mm size of CP with/without hole complete all as specified and as directed by Engineer-in-charge. |
| 59 | Taking down shutters of any description area exc 1 Sqm but not exc 2 Sqm and refixing in same opening including easying adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc. complete all as specified and as directed by Engineer-in-charge.(Renewal of builder's hardware if specially ordered shall be measured and paid for separately) |
| 60 | Taking down shutters of any description area exc 2.0 Sqm and refixing in same opening including easying adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc complete all as specified and as directed by Engineer-in-charge. (Renewal of builder's hardware if specially ordered shall be measured and paid for separately) |
| 61 | S&F in repairs Steel gate of any size , any shape and any position. Taking down steel gate and repair holdfast, uplifting of steel gate, welding to required member, repair/greasing to roller,repair and repositioning of Base Rail, make in true position to revolve, including one coat of synthetic enamal paint complete all as specified and as directed by Engineer-in-charge. |
| 62 | S&F 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass from wooden/steel frames complete all as specified and as directed by Engineer-in-charge. |
| 63 | All as per item No 62 above but figured glass complete all as specified and as directed by Engineer-in-charge. |
| 64 | S&F Aluminium door seal up to 1200mm length best quality complete all as specified and as directed by Engineer-in-charge. |
| 65 | S&F in repairs 300mm size mild steel, ordinary rat tail rod pattern spring (helical door spring) with roller and roller plates including welding to angle iron plate or chokhats as required complete all as specified and as directed by Engineer-in-charge. |
| 66 | S&F in repairs 0.56mm thick plain aluminium sheeting to doors, straight flashings with aluminium screws complete all as specified and as directed by Engineer-in-charge. |
| 67 | S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with alluminium wire staples or with screws or nuts and bolts as per site requirements complete all as specified and as directed by Engineer-in-charge. |
| 68 | S&F in repairs Stainless steel butt hinges 100mm complete all as specified and as directed by Engineer-in-charge.NOTE :- All screws shall be self tapping chromium plated and length of screw not less 38 mm complete all as directed and specified. |
| 69 | S&F in repairs Stainless steel sliding door bolts, plate type, bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long (selected quality as approved) complete all as specified and as directed by Engineer-in-charge. |
| 70 | S&F in repairs Stainless steel Tower Bolt of 200 mm long ( selected quality as approved ) fixed with Self Tapping screws complete all as specified and as directed by Engineer-in-charge. |
| 71 | S&F in repairs Stainless steel Handle of 150 mm long ( selected quality as approved ) fixed with Self Tapping screws complete all as specified and as directed by Engineer-in-charge. |
| 72 | S&F in repairs brass Handle cost type polished of 150 mm long ( selected quality as approved ) fixed with Self Tapping screws complete all as specified and as directed by Engineer-in-charge. |
| 73 | S&F in repairs floor door stopper of brass type polished and tongue 135 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed by Engineer-in-charge. |
| 74 | S&F in repairs Drapery curtain rod of stainless steel 25mm dia complete with stainless steel brackets and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw complete all as specified and as directed by Engineer-in-charge. |
| 75 | S&F in repairs Aluminium door/windows of any size/any description, taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading ,re-setting floor/hydraulic spring etc complete all as specified and as directed by Engineer-in-charge. |
| 76 | S&F in repairs double action floor spring hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty including taking down aluminium door shutter and refixing complete all as specified and as directed by Engineer-in-charge. |
| 77 | S&F in repairs Dead lock, vertical type 4 lever size 65 mm mild steel body with duplicate keys including key hole with fixing bracket complete all as specified and as directed by Engineer-in-charge. |
| 78 | S&F in repairs Mortice lock, vertical type 2 lever size 100mm brass with duplicate keys including key hole with fixing bracket complete all as specified and as directed by Engineer-in-charge.. |
| 79 | S&F in repairs aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kg ISI Marked complete all as specified and as directed by Engineer-in-charge. |
| 80 | S&F 5.00mm thick glass fixed with rubber packing aluminium snap beading and metal pins in skelton shutters of doors and windows including solar control film 25 micron reflective type stick to glass panes as per manufactures instructions including hacking out old broken glass from frames complete all as specified and as directed by Engineer-in-charge. |
| 81 | Demolition of Brickwork or stone/ boulder masonry, built incement mortar includingall quoins, arches, pillars,etc,complete all as specified and as directed by Engineer-in-charge. |
| 82 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed by Engineer-in-charge. |
| 83 | Taking Down Cement Plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed by Engineer-in-charge. |
| 84 | M&L Rendering 15mm thick CM (1:4) on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement and applying two coats of exterior emulsion weather proof paint over a coat of primer on new surface complete all as specified and as directed by Engineer-in-charge. |
| 85 | M&L Rendering 10mm thick CM (1:6) on brick or concrete surfaces finishing the surfaces even and fair and applying two coats of acrylic distemper of any tint over a coat of alkali resistant primercomplete all as specified and as directed by Engineer-in-charge. |
| 86 | M&L Dubbing out average 10mm thick on irregular face of walls cement plaster 1:6 complete all as specified and as directed by Engineer-in-charge. |
| 87 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness complete all as specified and as directed by Engineer-in-charge. |
| 88 | M&L 75 mm thick PCC (1:3:6 type) typ C-2 (using 40mm graded stone aggregate) as as in plinth protection, and finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge. |
| 89 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.complete all as specified and as directed by Engineer-in-charge. |
| 90 | M&L Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding exc. 0.06 sqm but not exc. 0.11 sqm as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM (1:4) complete all as specified and as directed by Engineer-in-charge. |
| 91 | M&L Coloured Vitrified Double Charged tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36sqm as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM (1:4) complete all as specified and as directed by Engineer-in-charge. |
| 92 | M&L Glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick CM (1:4) as backing coat complete all as specified and as directed by Engineer-in-charge. |
| 93 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed by Engineer-in-charge. |
| 94 | M&L 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing stone of any description complete all as specified and as directed by Engineer-in-charge. |
| 95 | Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed by Engineer-in-charge. |
| 96 | M&L Making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer's instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and repairing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure all as per manufacturer's instructions, complete all as specified and as directed by Engineer-in-charge.Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved. |
| 97 | M&L Cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and as directed by Engineer-in-charge.Make: STP, Asian paint, Berger paint, Pidilite, Fosrock |
| 98 | S&F in repairs Stainless steel Hasp and staple, safety type of 100 mm long including bolt to hinge plate and fixed with Self Tapping screws complete all as specified and as directed by Engineer-in-charge. |
| 99 | S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished complete all as specified and as directed by Engineer-in-charge. |
| 100 | S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including dismantling board complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 101 | S&F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and as directed by Engineer-in-charge.Make: Action tesa, Century, Kitply |
| 102 | S&F Continuous (piano) hinges, stainless steel, Width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified and as directed by Engineer-in-charge. |
| 103 | S&F Stainless steel Handle of 75 mm size (modular selected quality of design as approved) fixed with Self Tapping screws complete all as specified and as directed by Engineer-in-charge. |
| 104 | Removing of vegetation / plantation on the wall/ roof/any position, of up to double storey building including necessary scaffolding upto 15m height and roots, girth n.exc 10cm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete all as specified and as directed by Engineer-in-charge.Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately |
| 105 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.complete all as specified and as directed by Engineer-in-charge. |
| 106 | S&F 110mm dia PVC (SWR) grade single socketed pipes in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in-charge. |
| 107 | S&F 75mm dia PVC (SWR) grade single socketed pipes in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in-charge. |
| 108 | S&F 110mm dia PVC (SWR) grade single socketed pipes in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge. |
| 109 | S&F 75mm dia PVC (SWR) grade single socketed pipes in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge. |
| 110 | S&F 50mm dia PVC (SWR) grade single socketed pipes in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge. |
| 111 | S&F in repairs PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed by Engineer-in-charge. |
| 112 | S&F in repairs PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed by Engineer-in-charge. |
| 113 | S&F in repairs PVC (SWR) bends any radius of 50mm bore complete all as specified and as directed by Engineer-in-charge. |
| 114 | S&F in repairs PVC (SWR) branch piece, single Y, equal or unequal for 110mm bore pipe complete all as specified and as directed by Engineer-in-charge. |
| 115 | S&F in repairs PVC (SWR) branch piece, single Y, equal or unequal for 75mm bore pipe complete all as specified and as directed by Engineer-in-charge. |
| 116 | S&F in repairs PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and as directed by Engineer-in-charge. |
| 117 | S&F in repairs PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and as directed by Engineer-in-charge. |
| 118 | S&F in repairs plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for pedestal pattern WC/ semi pedestal and pattern WC (anglo India type) complete all as specified and as directed by Engineer-in-charge. |
| 119 | M&L Second class plain fillets square rectangular or trangular exc 3 & n exc 6 sqcm in section clean swan secured with nail complete all as specified and as directed by Engineer-in-charge. |
| 120 | Running weldings in repairs thickness of metal n exc 6 mm complete all as specified and as directed by Engineer-in-charge. |
| 121 | All as per Item No.120 above,but thickness of metal exc 6 but n exc 9 mm complete all as specified and as directed by Engineer-in-charge. |
| 122 | Welding in repairs n. exc 2.5cm in length thickness of metal n exc 6 mm complete all as specified and as directed by Engineer-in-charge. |
| 123 | Welding in repairs n. exc 2.5cm in length thickness of metal exc 6 mm but n exc 9 mm complete all as specified and as directed by Engineer-in-charge. |
| 124 | All as per Item No.123 above,but exc 2.5cm but n exc 5 cm in length thickness of metal n exc 6 mm complete all as specified and as directed by Engineer-in-charge. |
| 125 | M&L Framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work.complete all as specified and as directed by Engineer-in-charge. |
| 126 | S&F in repairs Fibre glass reinforced translucent plain sheeting 2.00 mm thick fixed with coach screw and washer in gate, wall etc. complete all as specified and as directed by Engineer-in-charge. |
| 127 | S&F in repairs magnetic door catcher with powerful magnet of stainless steel and iron catch plate for cupboard shutter complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
