|
| 1 | NOTE- Removal of debris to Mod land should be done entirely by contractors own arrangement. |
| 2 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. |
| 3 | Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 4 | Material and labour for brick work with sub class \\"B\\" bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4), complete all as specified. |
| 5 | Chipping , removing carefullly concrete work by low impact hammer, breakar without damaging the structure & cleaning and disposal of debris out side the premises etc. complete as directed by Engineer-in-Charge. (Note : Hard concrete should not be removed by force.) |
| 6 | Material and labour for cleaning existing reinforcement with wire/rotary wire brush,making the surfaces free from loose material dirt etc, applying two coats of alkaline rust converting primer FEOVERT or equivalent specification confirming to ASTM-B-117, on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 6 hour between the coats and applying protective coating IPNET-RB complete all as specified and directed. |
| 7 | M&L for Replacement of steel reinforcement with TMT bars of appropriate size where 30% of cross section is reduced including dismantling of rusted steel complete all as specified and directed. |
| 8 | Material & labour for carry out application of Bi-polar migratory corrosion inhibitor EPCO-KP-100/ Protectsil CIT/Ferogard 903 on concrete surface (this inhibitor shall have migratory kind of properly which permits the material to migrate to a virtual extent of 100 mm, through pores of concrete, inhibitor the corrosion and de-passivating the Electro-chemical reaction. It should have properly to attack as well as cathode, which is purely alkaline in nature (pH-9.5), So it has no carcinogen activity with concrete all as per manufacturer's instructions and directed. |
| 9 | M&L for Drilling Holes of 12mm dia, upto 100mm deep holes in structural members at the intervals of 300 to 500mm in staggered manner or along the crack as directed by the Engr-in-charge in RC structural element including Cleaning of the holes by air blower and Inserting 12mm dia. Teflon nozzles compatible with epoxy injector and having machined external end to receive outlet of grouting gun. Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing and allow to cure the system for min.8 hrs before grouting including removing nozzle projections, excess putty if any over concrete element grinding, levelling and finishing the external surface, after completion of the work, etc complete. |
| 10 | M&L for Grouting Injecting low viscosity high molecular weight thermosett polymer Monopol 250 H by pressure and using pressure epoxy injector with accessories till nozzles refused to accept the grout, Including Mixing material components part a and part b in required quantities as per mfg instruction by weigh batching Filling the grouting gun with monopol 250 H and maintaining desired pressure in the gun, air compressor and at exit (minimum 3 to 4 kg/Cm2) by a mechanism to monitor both pressure gauges and controlling the same by release valves and release the grout as per requirement simultaneously to grout the structural element through prefixed nozzles till its refusal. Seal the nozzle with thixotropic epoxy putty after the refusal. Note : leakages through other nozzles or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost. |
| 11 | M&L for Providing and applying structural grade EPIBOND-21-LP or equivalent prior to application of any type of mortar plaster confirming to ASTM-C-882-91 (Arizona slant shear test) to ensure bond between old concrete and new concrete complete all as per manufacturer's instructions and as directed by Engineer-in-Charge. |
| 12 | M&L for Building up the profile of structural member by using latex additives (MONOBOND or equivalent) modified air cured mortar system (Polymer modified mortar/LW+) (1:5:15 = 1 monobond-5 cement -15 sand) -in damaged area in 30mm thickness including leveling profiling etc complete all as per manufacturer's instructions and as directed by Engineer-in-Charge. |
| 13 | M&L for Providing and applying jacketing around columns with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete.(Note :- Reinforcement shall be measured and paid separately rates quoted shall be deemed to be inclusive of jacketing, formwork and micro concrete etc complete all as specified.) |
| 14 | M&L for Providing and applying fair finish 15mm thick plaster with readymix prepacked proportioned dry mix mortar mixed with Water proofing compound fair faces of brick wall or concrete surfaces additives , on External surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge.(Note :- (i) Liquid water proofing compound will be measured and paid seperately as supply only) |
| 15 | M&L for anti algae water-based Elastomeric exterior wall finish on newly plastered surfaces including surface preparation, applying suitable wall Primee seal primer 8-10 Sqm per ltr coverage area and application of two coats (base coat 4.2 -4.7 & top coat 6-6.5 sqm per ltr coverage area ) & of paint by roller etc. complete. |
| 16 | M&L for Providing and applying fair finish 15mm thick plaster with readymix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces additives, on internal surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge. |
| 17 | Material and labour for preparation of new plastered surface of wall and applying 2 coats of oil emuslion distemper over a coat of primer on 3 mm thick wall care putty , complete all as specified and directed. |
| 18 | M&L for Providing and applying fair finish 10mm thick plaster with readymix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces additives, on ceiling including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge. |
| 19 | Material and labour for preparation of new plastered surface of ceiling and applying two coats of oil emuslion distemper over a coat of primer on 3 mm thick wall care putty all as specified and directed. |
| 20 | M&L for washing rubbing down and stopping of old distempered and painted surface of ceiling and applying 2 coats of oil emuslion distemper over a coat of primer on of 3 mm thick wall care putty all as specified and directed. |
| 21 | M&L for washing rubbing down and stopping of old distempered and painted surface of wall and applying 2 coats of oil emuslion distemper over a coat of primer over 3mm thick wall care putty all as specified and directed. |
| 22 | Material & Labour for complete removal of extisting treatment on walls/surface with wire brush/rotatry wire brush, watering, cleaning of surface and opening of cracks in V shape and filling with (Crack X Paste) or any other techno-commercial equivalent in Fosroc, Krishna Conchem, etc. as approved by the Engineer-in-charge and applying anti-algae water based elastomeric exterior wall finish as on old plastered surfaces including surface preparation, applying suitable wall prime seal primer 8-10 sqm per ltr coverage area and application of two coats (base coat 4.2 -4.7 & top coat 6-6.5 sqm per ltr coverage area) & of paint by roller etc. complete all as specified and directed by the Engineer-in-charge. |
| 23 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 24 | Supply and fix MS framed works as in grills, railings, brackets for chajjas and similar works etc, conforming to FE-290 Gde E-165 |
| 25 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. |
| 26 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 27 | Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified. |
| 28 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching, coping, cills steps, parapets, railings up to 60cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified. |
| 29 | Supply and fix 110 mm dia PVC (SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls / laid in trenches with and including fixing clips and taking down old pipe of any description/ size complete all as specified and directed.. |
| 30 | Supply and fix in repairs 110 mm dia bore PVC (SWR) bends any radius |
| 31 | Dismantling of 100mm cast iron or reinforced concrete drain pipes, jointed in cement mortar, complete all as specified. |
| 32 | S&F 100 mm bore of sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste fixed to wall or laid in floors and including fixing of pipes in wall with clamps as mentioned and shown in HQ CE (N) Mumbai zone TD Drg No TD/2023/01 toTD/2023/03 complete all as specified. |
| 33 | Dismantling of 75mm cast iron or reinforced concrete drain pipes, jointed in cement mortar, complete all as specified. |
| 34 | S&F 75mm bore of sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste fixed to wall or laid on floors and including fixing of pipes in wall with clamps as mentioned and shown in HQ CE (N) Mumbai zone TD Drg No TD/2023/01 toTD/2023/03 complete all as specified. |
| 35 | S&F in repair 75mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including grating jalli complete all as specified and as directed. |
| 36 | S&F 75mm sand cast CI Branch pieces (Tee), Single (equal), ordinary or inverted (spigot or socket type) or with parallel branches with ovel access door and jointed with neat cement paste to CI pipes fixed to wall or roof at any floor/ any height/ any location including all fittings complete all as specified and as directed by Engr-in-Charge. |
| 37 | S&F 100mm sand cast CI Branch pieces (Tee), Single (equal), ordinary or inverted (spigot or socket type) or with parallel branches with ovel access door and jointed with neat cement paste to CI pipes fixed to wall , complete all as specified. |
| 38 | S&F 100mm sand cast CI Branch pieces (Tee), Double (equal), ordinary or inverted (spigot or socket type) or with parallel branches with ovel access door and jointed with neat cement paste to CI pipes fixed to wall , complete all as specified. |
| 39 | S&F 100mm Sand Cast CI Bends (any radius), diminishing pieces or tapers (larger bore measured) oval access doors, complete all as specified. |
| 40 | S&F in repair 100mm CI ‘P’ or ‘S’ Traps jointed with neat cement paste fixed to wall or roof at any floor/ any height/ any location including all fittings complete all as specified and as directed by Engr-in-Charge. |
| 41 | S&F in repairs 100mm Cast iron sanitary connections short connections pipe of length upto 300 mm, complete all as specified. |
| 42 | S&F in repair cast iron cowl suitable for 75mm dia pipe , complete all as specified. |
| 43 | S&F in repair cast iron cowl suitable for 100mm dia pipe, complete all as specified. |
| 44 | Taking down & Refixing 25mm old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as specified. |
| 45 | Taking down & Refixing 50 mm old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as specified. |
| 46 | Taking up or down 15mm bore steel tubing and connections, complete all as specified. |
| 47 | Taking up or down 20mm bore steel tubing and connections,complete all as specified. |
| 48 | Taking up or down 25mm bore steel tubing and connections, complete all as specified. |
| 49 | Taking up or down 50mm bore steel tubing and connections, complete all as specified. |
| 50 | S&F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (including special fittings if any i.e. Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc) concealed on walls/ceiling or laying in floors including fixing of pipes in wall with clamps, including making chases on wall complete all as specified. |
| 51 | S&F 20mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors , complete all as specified. |
| 52 | S&F 25mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified. |
| 53 | S&F 50mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified. |
| 54 | S&F in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch handle, screwed down, & fixed complete all as specified and as directed. |
| 55 | S&F in repairs 15mm fancy type chromium plated Two way Bib taps, as approved cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 56 | S&F in repairs stop valve/ angle valve fancy type chromium plated screwed down, high presure with butterfly handle screwed both ends for pipe and fixed to pipe of 15mm dia bore complete all as specified and as directed. |
| 57 | S&F in repairs 15mm bore stop valves fancy type chromium plated with long shank and cup (concealed type) 15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends, complete all as specified and as directed. |
| 58 | S&F 20 mm bore Stop valves , fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed as in repairs. |
| 59 | S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern), white including plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device ,complete all as specified and as directed. |
| 60 | S&F in repair vitreous china squatting pan Orissa pattern long pan size 510 x 410 x 260 mm with CI trap 100mm with integral foot rest & fixing incl but (excluding flushing cistern and flush pipe) making good floor to match all as specified. |
| 61 | S&F Providing and fixing white vitreous china undercounter wash basin of approved make, of size not less than 500 mm (L) × 350 mm (W), fixed below counter slab with necessary brackets and sealant, including 32 mm CP brass waste coupling, bottle trap and connections to waste pipe, and providing and fixing 15 mm CP brass long shank pillar tap with all necessary fittings and connections, complete in all specified and as directed. |
| 62 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 63 | S&F in repairs PVC valveless syphonic action type, flushing cistern Low level white, with inlet ball valve , float and handle 10 Ltr capacity including brackets complete all as specified and as directed. |
| 64 | S&F in repairs Health faucet (ABS Body) as aprroved mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long spirochrome Flexible tube and wall hook including making connections and fixed in position complete all as specified and directed. |
| 65 | S&F in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern complete all as specified and as directed. |
| 66 | S&F in repairs Chromium plated shower roses 125mm size icluding shower arm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 67 | S&F 5-6 mm thick plain silvered mirror glass of size 1200 mm × 600 mm, free from distortion, with machine polished edges, fixed to wall with stainless steel studs/bolts including necessary hardware, drilling and sealing with neutral silicone, complete in all specified as directed. |
| 68 | S&F in repairs brass chroumium plated tubular towel rail 20mm dia, D type 600mm long between flanges, complete all as specified and as directed. |
| 69 | S&F in repairs of 32mm/38mm dia PVC (flexible) waste pipe of length 900 mm complete all as specified and directed. |
| 70 | S&F in repairs low density polyethylene pipes (LDPE) of pressure rating 6 kg/cm2 fixed complete to walls, ceilings or in floors etc for outlet of washing machine/wash basin etc of 40 mm dia bore complete all as specified and as directed. |
| 71 | Disconnecting existing tanks exc 1000 ltrs but n exc 2000 ltrs, setting aside (or lowering if required) for repairs, and hoisting , reconnecting and re-fixing in position after Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc and hoisting and reconnecting and re-fixing in same position complete all as specfied and directed. |
| 72 | S&F 2000 lit capacity rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top ) hoisted and fixed position all specified in SSR Part-I, with and including 50mm dia ball valve, high pressure of PTMT, with epoxy coated aluminium rod & high density plastic ball, minimum weight 210gm, screwed for iron pipes and fixed; including disconnecting and dismantling/ taking down of existing old unserviceable water storage tank in roof, complete all as specified and directed by Engineer-in-Charge. |
| 73 | Demolition of Cement concrete in any description and in any position not other wise specifically provided on terrace of bldg (above 5th floor) directed by Engineer-in-Charge and removal of debris to out side MD land as per guidelines of BMC. |
| 74 | Material and labour for cement concrete 1:2:4 type B-2 (using 20mm graded stone aggregate) by using WPC @ 2% of weight of cement as in floor of RCC roof all as specified and directed.(Note: WPC shall be measured and paid seperately) |
| 75 | Supply only Integral water proofing compound |
| 76 | M&L for rendering 10mm thick cement plaster in cement Mortar 1:4 on concrete surfaces as on roof finished even and smooth without using extra cement complete all as specified and directed. |
| 77 | Material & labour for providing in repairs water proofing treatment with 4mm APP (Atactic polypropylene) modified polyester(bituminous) membrane reinforced of 3.5Kg/Sqm with non woven polyester mat of weight 160 gms/sqm as center core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane, after applying a coat of bituminous primer @ 0.25 Kg/Sqm over roof (An overlap of 100mm and 150mm shall be provided on sides and ends respectively) and applying two coats of aluminium paint on APP sheet complete all as specified and directed. |
| 78 | Material and labour for cement 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs and leveling course on RCC roof surfaces ( Terrace above 5th floor of bldg.) all as specified and directed. |
| 79 | Taking down chowkats or frames n exc 1.5 sqm each with shutters (without taking off shutters from the frame) , complete all as specified. |
| 80 | Taking down chowkats or frames exc 1.5 sqm each but n.exc 4 sqm with shutters (without taking off shutters from the frame) |
| 81 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube,including fixing in opening with suitable fasteners or holdfast and PCC as per specifiecation and drawings. |
| 82 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified. |
| 83 | S&F powder coated (colour of coating as directed) aluminium (minimum 25 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete including all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc all as specified and as directed. |
| 84 | Supply & fix aluminium anodised grill (minimum thickness of anodising 15 micron) including suitable aluminium anodized 'E'/'H' section frame as required with aluminium rebated/screwed attachment complete all as specified and directed complete all as specified and directed. (Note:- Aluminium grill shall be of Deco grill of M/s ELESAR FOCCHI Ltd as per Design No DG 102, 7.50mm x 6.0mm and weight shall not be less than 3.131Kg/Sqm or approved design.) |
| 85 | S&F sheet glass of 4.8 mm thick selected quality in square and exceding 0.5 Sqm in each pane, complete all as specified. |
| 86 | S&F figured sheet glass of 3.0 mm thick selected quality in square and not exceding 0.5 Sqm in each pane. |
| 87 | S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed. |
| 88 | M&L 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed. |
| 89 | S&F 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides one face covered with decorative face veneer with lipping/ frame to match complete all as specified and directed. |
| 90 | S&F 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc all as specified and directed. |
| 91 | S&F for aluminium anodized barrel tower bolts 200mm of extruded section and fixed. |
| 92 | S&F 200 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified. |
| 93 | S&F 100mm butt hinges medium weight, stainless steel and fixed. |
| 94 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 95 | M&L for Preparation of new wooden surafces & applying two coats of synthetic enemal paint over a coat of pink primer, complete all as specified. |
| 96 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar, complete all as directed. |
| 97 | M&L for machine cut cudappah stone slab 50mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 98 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed in CM (1:4) 15mm thick, & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete. |
| 99 | M&L for machine cut kota stone slab flooring 20-25mm thick in riser / treads of steps in single piece, skirting, dado and pillar laid over cement screed and jointed withover cement screed bed in CM (1:4) 15mm thick, & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete. |
| 100 | M&L Granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, and nosing /rounding to edges of stone slabs one edge,all as specified and directed. |
| 101 | M&L for Preparation of new steel surafces & apply two coats of synthetic enemal paint over a coat of red oxide, complete all as specified. |
| 102 | Dismantling floor hearth or wall tiling including cement mortar bedding and removing serviceble tiles to store and rubbish off the permises.complete all as specified & as directed. |
| 103 | M&L for Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6), complete all as specified. |
| 104 | M&L for Glazed ceramic tiles coloured of size 300X 450X 7mm laid on vertical surface such as dado/skirting over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or coloured cement including 10mm thick backing coat in CM 1:4 , complete all as specified. |
| 105 | M&L for PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in Plinth Protection, floor or paving 75 mm thick and finished even and smooth without using extra cement, as in plinth protection all as specified |
| 106 | Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed ,with suitable fittings fixed new line and in position complete all as specified. |
| 107 | 25mm bore |
| 108 | 40 mm bore |
| 109 | S&F in repairs fancy type drapery rods, powder coated aluminium of 20-25mm size incl brackets all as specified. |
| 110 | M&L for Providing & fixing in repairs false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to. be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15. x 32 mm of length 3000mm, cross-T of. size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto required length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specification Drawing and as per directions of the Eng-in- Charge. |
| 111 | Demolition of cement concrete of any description in sunken portion and removing debris out side MD land complete all as specified and directed. |
| 112 | M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely and 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding concrete to achieve proper slope including cutting holes in bricks or RCC wall for spout (Cost cutting holes and pipes shall be measured and paid separately) |
| 113 | M&L for Rendering of uneven surfaces with 10mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out.( WPC shall be measured & paid separately)Note- 1. All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy putty. 2. After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. |
| 114 | M&L for Plastering the bottom and sides up to bottom of the floor level with 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout including covering All pipes laid in sunken portion with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint.(Note- WPC shall be measured & paid separately) |
| 115 | M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+300mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. |
| 116 | M&L PCC 1:4:8 Type D2 using 40mm graded coarse aggregate as in lean concrete/filling concrete. |
| 117 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 118 | M&L for Point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories concealed in wall/ceiling/truss including cutting chases, pinning in etc with PVC non metallic ISI marked terminal boxes concealed wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly complete all as specified and directed. |
| 119 | (a) One light point controlled by one switch SP one way. |
| 120 | (b) One ceiling fan point controlled with one 5A switch |
| 121 | (c) One exhaust fan point controlled with one 5A switch |
| 122 | (d) One 3 pin socket outlet 5Amps on independant board. |
| 123 | (e) One 3 pin socket outlet 5Amps on same board with other switches. |
| 124 | Material and Labour for point wiring for 15 Amps socket complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping of size not less than 20 / 25 mm dia including PVC bend, tee joints etc as per site requirement, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 2.5 sqmm as earth continuity conductor connected to common earth as earth dolly. |
| 125 | S&F Modular Switch modular type single pole 1 way 5Amp 230 volts complete as directed. |
| 126 | S&F Socket combination 6Amps modular type 230 volts complete as directed. |
| 127 | S&F Modular Switch , 16Amp, One way, 230volts complete as directed |
| 128 | S&F Modular Socket , 6A/16A, 230volts with frame and cover all as specified . |
| 129 | S&F ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified and directed. |
| 130 | S&F Modular white cover plate with Frame 3 Module, ISI marked. |
| 131 | S&F Modular white cover plate with Frame 4 Module, ISI marked. |
| 132 | S&F Modular white cover plate with Frame 6 Module, ISI marked. |
| 133 | S&F Modular white cover plate with Frame 8 Module, ISI marked. |
| 134 | S&F Modular white cover plate with Frame 12 Module. |
| 135 | S&F Modular metal flush box 3 module flush in wall complete all as specifed and directed. |
| 136 | S&F Modular metal flush box 4 module flush in wall complete all as specifed and directed. |
| 137 | S&F Modular metal flush box 6 module flush in wall complete all as specifed and directed. |
| 138 | S&F Modular metal flush box 8 module flush in wall complete all as specifed and directed. |
| 139 | S&F Modular metal flush box 12 module flush in wall complete all as specifed and directed. |
| 140 | S&F in replacement Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as directed by engr-in-charge. |
| 141 | S&F LED lamp 12 watt, 240 volts, single phase, 50 Hz, Lumen 1450 AC supply complete all as specified and directed by Engr in Charge. |
| 142 | Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 143 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 144 | S&F of New LED Bldg security light 45 Watt indus series powder coated pressure die cast aluminium high power LED bldg security light with heat resistant toughned glass with lens with IP66 Protection including 40 mm dia pipe bracket , complete all as specified and directed by Engineer-in-Charge. |
| 145 | S&F DB 12 way Double door TPN type, 415 volt having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed. |
| 146 | S&F MCB, DB, SPN 8 way double door with protection type IP-42 with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as specified and directed. |
| 147 | S&F MCB TPN 40 to 100 Amps, 415 volt, 10 KA rating complete all as specified and directed. |
| 148 | S&F MCB SPN 40 to 63 Amps, 10 KA ratingcomplete all as specified and directed. |
| 149 | S&F MCB SP 6-32 Amps, 10 KA rating complete all as specified and directed. |
| 150 | Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces. |
| 151 | Supply and fix submain wiring 4 run x 10 sqmm + 1 run x 10 sqmm earh wire FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC casing and caping/ PVC conduit of suitable dia, ISI marked including 1 single core cable with stranded copper conductor of size 10 sqmm (green colour) for earthing.(Note :- (i) Four runs of 10 Sqmm cable, 1 run of PVC casing & caping/ PVC conduit and 1 run of 10 Sqmm cable for earth shall be measured as 1 RM.) |
| 152 | Supply and fixing Submain wiring with proper colour coding, 2 single core FRLS 1100 Volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC casing and caping of suitable size not less than 25 mm including 1 single core cable with stranded copper conductor of size 10 Sqmm (green colour) for earthing. (Note : 2 runs of 10 Sqmm cable, 1 run of PVC Conduit/PVC casing caping and 1 run of 10 Sqmm cable shall be measured as 1 Run.) |
| 153 | S&F Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners. |
| 154 | Taking down Ceiling fan, sealing cable end, dismantling blades carefully and removing fan and blades to MES E/M Store for safe custody all as directed by Engr-in- charge. |
| 155 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories , 230 volts , 1200 sweep. Min air delivery 210 CFM with service value 6.0 BEE. Five star rated with brushles direct current motor. |
| 156 | M&L for rewinding of unserviceable exhaust fans lof size 225/300 mm sweep with approved copper enamalled wire of suitable guage, varnishing, replacing existing nut bolts pins, rubber bush, capacitor , bearing ,m bush, frastner and one coat of synthetic enamel paint by spray painting complete including taking down and refixing in exsiting position and testing complete all as specified and directed by Engr in charge. |
| 157 | Supply and fix heavy duty 250 mm exhaust fan metal blade (03 nos blade set) complete all as specified and directed by Engr in Charge. |
| 158 | Material & Labour for Earthing with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, burried directely in ground (earth pit not less than 2.5 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 32 x 6 mm with the help of bolts, nuts, check nuts and washers of galvanised iron or steel, including necessary excavation, PCC 1:3:6 type D2 and PCC cover 1:2:4 type B1 watering arrangement with GI pipe funnel, jali, complete all as specified and shown in electrical plate No.3 including connection to the earthing test point and testing on completion. |
| 159 | S&F CP gate valve of 15 mm bore suitable for fixing on existing fittings complete all as specified and directed by engineer in charge. |
| 160 | Supply and fix hot water extension pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position complete all as specified. |
| 161 | Supply and fix Cold water extension pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position complete all as specified. |
| 162 | Supply and fixing 15 mm Bib taps, cast copper alloy with crutch or round handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 163 | S&F in replacement hot water PVC pipe 15 mm bore with all fittings as required at site i.e. elbow,socket,nipple reducer & union as required for plumbing work and making connection as required at site all as specified and as directed by engr-in-charge. (Note: Rate quoted shall also include the plumber work as per site requirements.) |
| 164 | S&F in replacement of top plug 15 Amp 3 pin complete all as specified and directed by engineer in charge. Please Enable Macros to View BoQ information |
