|
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises, complete all as specified and directed. |
| 2 | M&L Vitrified light shade tiles 10 mm thick light shade (square/rectangular) area of each tiles exceeding .18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes. complete all as specified and directed. |
| 3 | M&L Vitrified light shade tiles 10 mm thick dark shade (square/rectangular) area of each tiles exceeding .18 sqm but not exceeding 0.38 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified & directed |
| 4 | M&L Vitrified light shade 10 mm thick light shade (square/rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes. complete all as specified and directed. |
| 5 | M&L Vitrified light shadetiles 10 mm thick dark shade (square/rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified & directed |
| 6 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with coloured tiles over with and including 15 mm Screed bed in Cement mortar 1: 6 Complete all as specified and directed. |
| 7 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | Description all as per item srl No. 7.00 here in before but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 9 | M&L for glazed coloured ceramic tile ,first quality( of approved class , colour and design/ shade ) of size 300 x 450 / 350x450 / 350x250 thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over with and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed. |
| 10 | Demolition of plain cement concrete (Un reinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 11 | M&L for 75mm thick cement concrete type C-2,1:3:6 (using 40mm graded crushed stone aggregate) as in sub floor complete all as specified and directed. |
| 12 | Removing of old treatment from old concrete floor/terrace taking down existing detoriated / decayed tarfelt or any treatment including loose surface, scraping with scraper, chiseling.scraping of surface with wire brush of any other method. sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 1000 m complete all as specified and directed |
| 13 | M&L 25 mm thick PCC (1:2:4) type B-0, (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed. |
| 14 | M&L 10mm thick cement plaster on fair face of concrete surface including repair of doubing roof surfaces in CM 1:3 finished even land smooth without using extra cement over complete all as specified and directed.(Note: Water proofing compound shall be measured and paid sepratly ) |
| 15 | Supply only Liquid water proofing compound complete all as specified and directed |
| 16 | M&L for Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered complete all as specified and directed. |
| 17 | M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by propane torch application complete all as specified and directed. |
| 18 | M&L for Heat resisting paint on Surfaces of any description wood, steel, iron, concrete, brick, stone, etc exceeding 10cm in width or girth complete all as specified and directed. |
| 19 | S&F in repairs Rotational moulded polyethene Water Storage Tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed. |
| 20 | S&F in repairs Rotational moulded polyethene Water Storage Tanks 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed. |
| 21 | Taking up or down steel tubing and connections 15mm bore complete all as specified and directed. |
| 22 | Taking up or down steel tubing and connections 20mm bore complete all as specified and directed. |
| 23 | M&L for Cutting chases not exc 10cm girth in brick walls for concealed water tubings and making good, complete all as specified and directed. |
| 24 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 25 | Description all as per item Srl No. 24.00 here in before but 20mm bore complete all as specified and directed |
| 26 | S&F in repair PVC low level flushing cistern 10 Ltr capacity with & including brackets for fixing to walls complete and PVC flush pipe of LDPE pipe of pressure rating 6 kg (f)/ sq.cm complete all as specified and directed |
| 27 | S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and 15mm dia chromium plated brass washing jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe with chromium plated spring type cover complete with fixing arrangement fancy look complete all as specified and directed. |
| 28 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete with fixing arrangement fancy look complete all as specified and directed. |
| 29 | S&F in repair fancy type, stop cock regular body 15 mm nominal bore with flange, brass, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 30 | S&F in repair Bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore fixed in repair complete all as specified and directed |
| 31 | S&F in repair Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore, fixed in repairs complete all as specified and directed Prayag or equivalent in specified makes as approved |
| 32 | S&F in repair Bevelled edge mirror of 5 to 6 mm thick selected quality glass, 660 x 450mm size, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs complete all as specified and directed. |
| 33 | S&F in repairs polyester coloured venetian blind mounted on doors windows with aluminium hanging channel with sliding wheel rope including all necessary fittings and fixture complete all as specified and directedNOTE:- Coloured of venetian shall be approved by Engr in charge. |
| 34 | Taking down Cast iron/PVC pipe of any dia and size fixed on wall or floor including all fittings complete all as specified and directed. |
| 35 | S&F 110mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 36 | S&F 110 mm dia PVC(SWR) bends/ shoes any radius complete all as specified and directed. |
| 37 | S&F PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 38 | S&F 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 39 | S&F 75 mm dia PVC(SWR) bends/ shoes any radius complete all as specified and directed |
| 40 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 41 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 42 | S&F in repair for PVC board ,interior grade colour prelaminated one side with decorated choice lamination and other side balancing white lamination fixed with screws to tibber frame work 18/19mm thick complete all as specified and directed. |
| 43 | S&F in repair 18 to 20 mm thick solid PVC Board for cupboard/cabinet partitions/frame as per specification and drawing and necessary beading in matching colour complete all as specified and directed. |
| 44 | Supply and fix continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm complete all as specified and directed. |
| 45 | S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and directed. |
| 46 | S&F brass handles, cast type, polished bright 100 mm size complete all as specified and directed. |
| 47 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 48 | M&L rendering 10mm thick cement plaster in cement mortar (1:3) finished even & smooth without using extra cement on brick/concrete/ceiling surfaces complete all as specified and directed. |
| 49 | M&L for two coats of oil bound distemper over a coat of primer on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed. |
| 50 | Taking down shutter exc. 1 Sqm and n.exc 2 Sqm each shutters of any description complete all as specified and directed. |
| 51 | Taking down chowkhats with shutters (without taking off shutters from frame) not exc. 1.50 sqm each complete all as specified and directed. |
| 52 | Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm with shutter(without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 53 | S&F powder coated of any colour aluminium window and ventilators shutters, side hung type without sashbars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1no) hinges type B-21 100 mm long (2 no) suitable handles 01 Nos locking arrangment, complete all as specified and directed. (panels likes prelaminated particle board / sheet glass shall be measured and paid seprately) |
| 54 | S&F in solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2004 complete all as specified and directed. |
| 55 | S&F Factory Made Solid PVC wood free EPS Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and directed. |
| 56 | M&L for 40 mm thick flush shutters, solid core construction, exterior grade with block board core and plywood face, pannels, commercial type on both sides and one face is covered withdecorative face veneer with lipping / frame to match, including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed. |
| 57 | S&F factory made glazed and Skelton 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded,mitred and rebated sash bars, any numbers , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part-I section 8, clause 8-24 (a) complete all as specified and directed. |
| 58 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples, fixed in repairs complete all as specified and directed. |
| 59 | S&F Aluminium alloy, anodised, sliding door bolt 200mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 60 | S&F Aluminium anodised barrel Tower Bolts of extruded section 200 mm long fixed with screws complete all as specified and directed. |
| 61 | S&F Aluminium anodised handle of extruded section 100 mm long fixed with screws complete all as specified and directed. |
| 62 | S&F Aluminium alloy Butt hinges with galvanised mild steel hinge pin100 mm long anodised and fixed, type b-21 complete all as specified and directed. |
| 63 | M&L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 64 | Providing and fixing factory made uPVC white color Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and nterlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 65 | Area not exceeding 2.00 sqm each |
| 66 | Area exceeding 2.00 sqm each |
| 67 | Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and nterlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 68 | Area not exceeding 2.00 sqm each |
| 69 | Area exceeding 2.00 sqm each |
| 70 | M&L in repair for 4.8 mm thick sheet glass ordinary quality in panes not exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed. |
| 71 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified. |
| 72 | S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No.3 universal type, suitable for doors shutters up to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed. |
| 73 | Providing & fixing in repair false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm,with semi perforated 12mm thick micro tegular edged GRG false ceiling suspended from ceiling using galvanized mild steel items. (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded. hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. |
| 74 | S&F repair Solid pvc wall lining consisting of 5 mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on pvc frame as per specifications complete all as specified and directed. |
| 75 | S&F 5 mm thick pvc sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frames as per specification complete all as specified and directed. |
| 76 | Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 n.exc 500 ltrs and from mouth of circulating pipes, etc including disconnecting, reconnecting & refixing water tanks in position complete all as specified and directed. Please Enable Macros to View BoQ information |
