|
| 1 | S&F in repair fancy type, stop cock regular body 15 mm nominal bore with flange, brass, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 2 | S&F in repairs Stop Valve 20 mm, cast copper alloy, screwed down high pressure with crutch or butterfly handle etc complete all as specified and directed. |
| 3 | Removing air lock from GI pipe of any size by opening of joints/fittings and refixing the same after the job is done complete all as specified and directed. |
| 4 | Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 n.exc 500 ltrs and from mouth of circulating pipes, etc including disconnecting, reconnecting & refixing water tanks in position complete all as specified and directed. |
| 5 | Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 n.exc 1000 ltrs and from mouth of circulating pipes, etc including disconnecting, reconnecting & refixing water tanks in position complete all as specified and directed. |
| 6 | S&F in repair Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore, fixed in repairs complete. Prayag or equivalent in specified makes as approved complete all as specified and directed. |
| 7 | Supply & Fixing in repairs of 15mm bore CP wall mixter with telephonic shower with tube and hook of make Prayag or equivalent in specified makes as approved complete all as specified and directed. |
| 8 | S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 9 | S&F in repair Spindles for 15mm brass or CP brass stop cocks, bib taps etc, fixed in repairs complete all as specified and directed. |
| 10 | Taking up or down steel tubing and connections 15mm bore complete all as specified and directed. |
| 11 | Taking up or down steel tubing and connections 20mm bore complete all as specified and directed. |
| 12 | M&L for Cutting chases not exc 10cm girth in brick walls for concealed water tubings and making good, complete all as specified and directed. |
| 13 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 14 | Description all as per item Srl No. 13.00 here in before but 20mm bore complete all as specified and directed. |
| 15 | S&F in repair PVC low level flushing cistern 10 Ltr capacity with & including brackets for fixing to walls complete and PVC flush pipe of LDPE pipe of pressure rating 6 kg (f)/ sq.cm complete all as specified and directed. |
| 16 | S&F in repair Small fittings galvanized iron medium grade such as socket, elbow, nipple, for 15mm bore pipe fixed in repairs complete all as specified and directed. |
| 17 | S&F in repair PVC flush pipe 32 mm dia for low level flushing cistern, fixed in repairs complete all as specified and directed. |
| 18 | S&F in repair European wall mounted once piece white vitreous China wash down water closet incluiding hydroulic Seat cover made using high quality made using high quality material fine finishing for elegant asthetic look P/S trap and fulsing arrangement, fixing bolts, flushing cistern ,connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with complete with fixing arrangement fancy look complete all as specified and directed. |
| 19 | S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and 15mm dia chromium plated brass washing jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe with chromium plated spring type cover complete with fixing arrangement fancy look complete all as specified and directed. |
| 20 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete with fixing arrangement fancy look complete all as specified and directed. |
| 21 | S&F in repairs vitreous china urinals, flat back of size 465mmx355mmx265 mm, white minimum incl grating and union for discharge pipe complete incl providing & fixingplugs, bedding urinal against wall in cement mortar 1:2, securing urinals plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and as directed. |
| 22 | S&F in repair PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts, fixed in repairs complete all as specified and directed. |
| 23 | S&F Grating doom 125mm dia with waste hole of PTMT fixed on floor/nahani trap with cement mortar, fixed in repairs (Minimum weight 40 gms) complete all as specified and directed. |
| 24 | S&F table top vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 25 | S&F PVC waste pipe 32mm dia, 60 cm long for WHB with cup, fixed in repairs complete all as specified and directed. |
| 26 | Description all as per item Srl No. 25.00 here in before but but 40mm dia for sink complete all as specified and directed. |
| 27 | S&F in repairs Stainless steel waste coupling for S.S Sink 75mm to 100mm dia set with rubber washer plug etc complete all as specified and directed. |
| 28 | S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, fixed in repairs complete all as specified and directed. |
| 29 | S&F in repair Bevelled edge mirror of 5 to 6 mm thick selected quality glass, 660 x 450mm size, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs complete all as specified and directed. |
| 30 | S&F in repair Bathroom Cabinet box mirror of 5 to 6 mm thick selected quality glass, 660 x 450mm size, mounted on Wall including all fixing arrange ment complete all as specified and directed. |
| 31 | S&F Door closer hydraulically regulated, aluminium body, designation No.3, universal type, suitable for door shutters of weight between 61 to 80 Kg, fixed in repairs complete all as specified and directed. |
| 32 | S&F in repair Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete all as specified and directed. |
| 33 | Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins complete all as specified and directed. |
| 34 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5Sqm in each pane complete. |
| 35 | Description all as per item Srl No. .34.00 here in before but but with 5.50mm thick ordinary sheet glass complete all as specified and directed. |
| 36 | S&F 10 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape,drilling holes and nessary fittings complete all as specified and directed. |
| 37 | S&F in repair Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete all as specified and directed. |
| 38 | S&F in repair 150 mm, ordinary rat tail rod pattern springs of brass including roller and roller plate, fixed in repairs complete all as specified and directed. |
| 39 | S&Fin repairs polyester coloured venetian blind mounted on doors windows with aluminium hanging channel with sliding wheel rope including all necessary fittings andfixture complete all as specified and directedNOTE:- Coloured of venetian shall be approved by Engr in charge. |
| 40 | S&Fin repairs coloured 1 mm thick zebra venetian blind ,roller venetian ,vertical venetian with opening and closing arrangement including aluminium hanging channel at top with sliding wheel/ring including pulling rope in both side and necessary accessories complete all as specified and directed.NOTE:- Coloured of zebra blind shall be approved by Engr in charge |
| 41 | S&F in repair Stainless steel plate rack (utensil rack) of size (600mm x 750 mm) and depth 300 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts fixed in repairs complete all as specified and directed. |
| 42 | S&F in Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm fixed in repairs complete all as specified and directed. |
| 43 | Taking down Cast iron/PVC pipe of any dia and size fixed on wall or floor including all fittings complete all as specified and directed. |
| 44 | S&F 110mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 45 | S&F 110 mm dia PVC(SWR) bends/ shoes any radius complete all as specified and directed. |
| 46 | S&F PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 47 | S&F 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 48 | S&F 75 mm dia PVC(SWR) bends/ shoes any radius complete all as specified and directed. |
| 49 | S&F in repairs Rotational moulded polyeth Water Storage Tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed. |
| 50 | S&F in repairs Rotational moulded polyeth Water Storage Tanks 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed. |
| 51 | S&F in repairs Rotational moulded polyeth Water Storage Tanks 2000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed. |
| 52 | Refixing shutters of any description (wooden) exceeding 1.0 Sqm but n. exc 2.0 sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed. |
| 53 | S&F in repair CP toilet paper holder chromium plated or stainless steel complete all as specified and directed. |
| 54 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified as approved by Engr-in-charge |
| 55 | S&F in repair PVC connections 15mm size with PTMTnuts of length 450mm complete all as specified and directed. |
| 56 | S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed. Make Sandhu/Samrat |
| 57 | S&F in repair aluminium Mortice lock,2 lever vertical type, size 100 mm complete all as specified and directed. |
| 58 | Taking down shutter exc. 1 Sqm and n.exc 2 Sqm each shutters of any description. complete all as specified and directed. |
| 59 | Taking down chowkhats with shutters (without taking off shutters from frame) not exc. 1.50 sqm each complete all as specified and directed. |
| 60 | Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm with shutter(without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 61 | S&F powder coated of any colour aluminium window and ventilators shutters, side hung type without sashbars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking,anodised aluminium snap beading, screws,anodised aluminium fittings such as peg stays 150 mm long (1no) hinges type B-21 100 mm long (2 no) suitable handles 01 Nos locking arrangment, complete all as specified and directed. (panels likes prelaminated particle board / sheet glass shall be measured and paid seprately) |
| 62 | M&L in repair for 4.8 mm thick sheet glass ordinary quality in panes not exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed. |
| 63 | S&F in repair solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2004. complete all as specified and directed. |
| 64 | S&F Factory Made Solid PVC wood free EPS Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and directed. |
| 65 | M&L for 40 mm thick flush shutters, solid core construction, exterior grade with block board core and plywood face, pannels, commercial type on both sides and one face is covered withdecorative face veneer with lipping / frame to match, including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed. |
| 66 | S&F factory made glazed and Skelton 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded,mitred and rebated sash bars, any numbers , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part-I section 8, clause 8-24 (a) complete all as specified and directed. |
| 67 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples, fixed in repairs complete all as specified and directed. |
| 68 | S&F powder coated 3 track aluminium sliding window three track with two glass shutters using 4 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperature 1.61 mm using aluminium powder coated section aluminium cleat, PVC track, beading handle, lock, rubber beading etc complete fittings as per manufacture instructions complete all as specified and directed. |
| 69 | S&F powder coated aluminium sliding window two track with two glass shutters aluminium powder coated section aluminium cleat, PVC track, bearing, handle locking arangement, rubber beading etc complete all as specified and directed. |
| 70 | S&F in repair aluminium anodised grill with mesh size 75mm and aluminium bar 6mm XPM type including all necessary accesseries such as channel for fixing grill, screw etc aluminium section 15 micron thick anodizing complete all as specified and directed. |
| 71 | S&F Aluminium alloy, anodised, sliding door bolt 200mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 72 | S&F Aluminium anodised barrel Tower Bolts of extruded section 200 mm long fixed with screws complete all as specified and directed. |
| 73 | S&F Aluminium anodised handle of extruded section 100 mm long fixed with screws complete all as specified and directed. |
| 74 | S&F Aluminium alloy Butt hinges with galvanised mild steel hinge pin100 mm long anodised and fixed, type b-21 complete all as specified and directed. |
| 75 | M&L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 76 | S&F in repair for PVC board ,interior grade colour prelaminated one side with decorated choice lamination and other side balancing white lamination fixed with screws to tibber frame work 18/19mm thick complete all as specified and directed. |
| 77 | S&F in repair 18 to 20 mm thick solid PVC Board for cupboard/cabinet partitions/frame as per specification and drawing and necessary beading in matching colour complete all as specified and directed. |
| 78 | Supply and fix continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm complete all as specified and directed. |
| 79 | S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and directed. |
| 80 | S&F brass handles, cast type, polished bright 100 mm size complete all as specified and directed. |
| 81 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises, complete all as specified and directed. |
| 82 | M&L Vitrified coloured tiles 10 mm thick light shade (square/rectangular) area of each tiles exceeding .18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes. complete all as specified and directed. |
| 83 | M&L Vitrified coloured tiles 10 mm thick dark shade (square/rectangular) area of each tiles exceeding .18 sqm but not exceeding 0.38 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified & directed |
| 84 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 85 | Description all as per item srl No. 84.00 here in before but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 86 | M&L for glazed coloured ceramic tile ,first quality( of approved class , colour and design/ shade ) of size 300 x 450 / 350x450 / 350x250 thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over with and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed. |
| 87 | Demolition of plain cement concrete (Un reinforced)Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 88 | M&L for 75mm thick cement concrete type C-2,1:3:6 (using 40mm graded crushed stone aggregate) as in sub floor complete all as specified and directed. |
| 89 | Taking down cement plaster on brick wall incl racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 90 | M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces complete all as specified and directed. |
| 91 | M&L for two coats of oil bound distemper on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 92 | M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl Demolition of stone slab and tiles laid dry or laid dry and pointed in any mortor of any description or thickness in floor, aprons etc complete all as specified and directed. . |
| 93 | M&L for preparing old surfaces of walls plastered plastered by complete removal of existing treatment by electric grinder brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying two coat of approved shade of oil emulsion distemper, complete all as specified and directed |
| 94 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 95 | M&L for preparing old surfaces of walls plastered plastered by complete removal of existing treatment by electric grinder brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required hade (Company Depot Tinted) with silicon additive @ 1.43 litre/ 10 sqm over and complete all as specified and directed. |
| 96 | M&L for coloured 3D/2D PVC Vinyl wall cladding/ convering/wall paper minium 3 mm/ 5 mm thick on fixing on vertical/horzental surface on wall /celing with necessary adheshive/fitting,fixture or as per manufacturers instruction complete all as specified and directed |
| 97 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed. |
| 98 | M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 99 | M&L for 4 mm thick figured glass pin headed type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 100 | Providing and fixing in reapir false ceiling at all heights with semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99 %, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85 % (minimum) to be laid in true horizontal level suspended on inter locking metal T-grid of hot dipped (galvanised @ 120 grams per sqm inclding both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm cross -T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm,suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm ) i.e 50mm long ,8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85 x25 x2mm. Galvanised iron perimeter wall angle of size 24 x 24 x 0.40 mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm cedntre to centre and 40 mm long dry wall wood screws.the work shall be carried out as per specifications, drawing and as per directions of the Engr-in-Charge. |
| 101 | S&F in repair 1.25mm thickness of laths steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, haps and staple and one shop coat of primer erected in position as indicated push pull or manual type complete all as specified and directed. Please Enable Macros to View BoQ information |
| 102 | S&F in repair 1.25mm thickness of laths steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, haps and staple and one shop coat of primer erected in position as indicated push pull or manual type complete all as specified and directed. Please Enable Macros to View BoQ information |
