Tender For Estimate For Repairing And Maintenance Of Go-Down Within Stackyard Of Balurghat(A-I) Sub-Division Under Balurghat(A-I) Division, Dinajpur Dakshin-West Bengal
TDR : 55701552
Tender Notice
BOQ
6 Days Left
Dinajpur Dakshin
West Bengal
Tender For Estimate For Repairing And Maintenance Of Go-Down Within Stackyard Of Balurghat(A-I) Sub-Division Under Balurghat(A-I) Division
Name of Work:- Estimate for repairing and maintenance of Go-Down within stackyard of Balurghat(A-I) Sub-Division under Balurghat(A-I) Division
Sl. No.
Item Description
1
Taking out carefully G.C.I. orC.I. or asbestos sheets (including ridges etc.) fromroof orwall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed. Roof
2
Supplying, fitting&fixing circular corrugatedAluminium sheet (excluding the supporting framework) of approved make&brand inalloy3105conforming to IS: 1254-1991 fittedand fixedwith55mm&25mmSelf tappingscrew, EPDMWasher16mmdia&3mmthwasheretccomplete with 150 mm. end lap and one corrugation minimum side lap. (Payment tobemadeonareaof finishedwork) (Aluminium sheet to be supplied by contractor). (i) In Roof:- a) With 0.65 mm thick sheet
3
Aluminium sheet ridging fittedwith self tapping screws, EPDM washers etc complete.(Minimum 225mm end lapping). (A) 300 mm lapping each way (a) With 0.71 mm sheet
4
M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. For roof truss works a) Span up to 12 Mtr
5
Supplying, fitting and fixing steel rolling shutter profile type with 18B.G.ofapprovedtypesteel latchesection75mmwide, fittedwith coil wire spring tonecessiate the fittingof requiredNos. ofC.I. Pulleysonheavytypesoliddrawnseamlesssteel tubecompletewith locking arrangements both inside and outside specially built up side guide channels including providing a hood for the steel rolling shutter in the room,painting two coats of approved aluminium paint over a coat of red lead primer complete.
6
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
7
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surfacebysandpaperingetc. including using of approved putty etc. on the surface, if necessary :On steel or other metal surface : With super gloss (hi-gloss) Two coats (with any shade except white)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
