Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Total Value |
| 2 | SCHEDULE A - Civil Work of Building For detail description of item refer tender document |
| 3 | Preparation of all types of drawings required for obtaining all type of permissions for construction of 96 numbers quarters in two buildings, water connection, sewerage connection, storm water connection from Brihan Mumbai Municipal Corporation / local bodies and or any other agencies as required. The scope of item includes. 1) Architectural consultancy from approved architect of BMC. The fee of architects shall be borne by the contractor as it is deemed to be included in this item. 2) Preparation of all type of drawings in AutoCAD required for approval for construction of building from local authority i.e. Brihan Mumbai Municipal Corporation (BMC) etc. 3) obtaining approval / construction permission along with all other permission required such as Fire brigade, water supply department, sewerage department etc. 4) Obtaining occupation certificate from BMC. 5) Preparation of completion drawings in AutoCAD software with one print out on 95-micron thick polyester film, one copy on RTF and soft copy on compact DiskSchedule of payment for this item will be as under: |
| 4 | After Obtaining approval / permission for construction of buildings from BMC / local authority. |
| 5 | After Obtaining permission & connection for water supply from BMC / local bodies. |
| 6 | After Obtaining permission for sewerage connection from BMC / local bodies etc. |
| 7 | After obtaining occupation certificate from BMC / local authority etc. |
| 8 | Obtaining minimum silver rating (3 star) by IGBC/GRIHA or any other authorized agency. |
| 9 | Cutting of trees including depositing the wood at nominated locations with loading, transporting etc. The contractor shall obtain necessary approval from concerned authorities for cutting/transplanting trees. The required payment to concerned authority for obtaining permission will be made by MRVC. |
| 10 | Height Below 20 feet - Girth below 1 foot |
| 11 | Height up to 20 feet, Girth from 1 foot to 2.5 feet |
| 12 | Girth of tree over 2.5 feet to 5 feet |
| 13 | Girth of tree over 5 feet |
| 14 | Transplanting of existing trees by uprooting, shifting & placing in pits excavated of suitable size within one KM distance and refilling with manure & soil and maintaining the plant for 12 months.Note:-(i) 40% payment will made after proper transplanting of trees.(ii) 30% payment will be made after maintenance of 6 months for survived trees.(iii) 30% payment will be made after maintenance of one year for survived trees. The trees transplanted under this item will not be considered for payment under item for cutting |
| 15 | Excavation for foundations & trenches by Manual means in all types of soils, boulders, WBM roads , including rock not requiring blasting including dewatering by manual or mechanical means etc. as per specifications with all contractors own machinery and equipments, crossing of track, shoring, strutting, timbering and buttressing with sand /clay bags and all such measures necessary to retain in position the sides of the foundation pit and including backfilling, rolling the excavated material with watering, ramming, levelling the site and disposing off the urplus/unusable earth to low lying area within railway boundary with lead up to 100 m & all lifts as per directions of Engineer. |
| 16 | Excavation in foundations by mechanical means in all types of soils, boulders, WBM roads, including rock not requiring blasting including dewatering by manual or mechanical means etc. as per specifications with all contractor’s own machinery and equipment, crossing of track, shoring, strutting, timbering and buttressing with sand /clay bags and all such measures necessary to retain in position the sides of the foundation pit and including backfilling, rolling the excavated material with watering, ramming, levelling the site and disposing off the surplus/unusable earth to low lying area within railway boundary with all leads & lifts as per directions of Engineer.Note:-1. The rates are inclusive of all safety measures to be adopted for protection of structures in the vicinity of works.2. Payment shall be made only for design profile and no payment shall be given for any over cut.3. The excavation shall be done by any mechanical means to suite site conditions etc.4. Disposing off the surplus/unusable earth to outside railway boundary with all leads & lifts as per directions of Engineer will be paid separately under relevant item. |
| 17 | Excavation in foundations in boulders including rocks requiring chiselling (blasting is not permitted) by manual and mechanical means including dewatering etc. as per specifications with all contractor's own machinery and equipment, labour, lead & lift, crossing of track, including disposing the rock / stone at suitable nominated locations as per directions of Engineer.Note: -1. The rates are inclusive of all safety measures to be adopted for protection of structures in the vicinity of works.2. Payment shall be made only for design profile and no payment shall be given for any over cut.3. The excavation shall be done by any means to suite site conditions for protection of utility services such as cables, pipe lines etc. |
| 18 | Filling contractor's murum/good quality granular material as specified in Railway Specification without stacking directly in plinths and floors, including platforms etc.complete including watering and ramming, all contractors labour, equipments, materials, crossing of tracks, lead & lifts etc. complete. Payment will be made based on cross- section area. Rate is inclusive of royalty to be paid to stategovernment. |
| 19 | Extra for disposing off surplus excavated earth or unusable/unsuitable earth/muck/debris etc. outside Railway Boundary with all contractor's tools, plants, equipments and labours with loading, unloading, transport etc. complete including all lead & lift as per the direction of Engineer in charge. |
| 20 | Providing and Fixing temporary barricading to enclose construction area of minimum 15 meters high with mild steel angle frame of size 75 x 75 x 8 mm and GI corrugated sheet of 0.5 mm thickness as per the approved drawing and as per specifications, including foundations. The rate includes one coat of red oxide primer before erection, two coats of approved paint & shade (including MRVC logo at every 15-20 metre) as per the specifications, erecting in position, welding / bolting. The rate includes cost of all materials, including fixtures, bolts, painting, labour, transportation, leads, lifts, crossing of tracks, etc., complete. As directed by the engineer. Note: 1. Released materials will be the property of contractor after satisfactory completion of work. Contractor has to remove and clear the site after work is over.2. Payment schedule:a) 60% payment will be released on installation as per approved drawing.b) 10% of the payment will be made for satisfactory maintenance of barricading after six months including one coat of painting. Additional 10% will be paid after satisfactory maintenance after 12 months including one coat of painting.c) Balance 20% payment will be made on completion of work at site as certified and directed by Engineer-in Charge and on removal & clearing of site. |
| 21 | Providing hand packed rubble soling in foundations, etc. with all contractor's stone, material, labour, tools & plants etc. including all lead & lift, crossing of track, transportation etc complete as per Railway's specificationsand direction of Engineer-in-charge. |
| 22 | Providing Ready Mixed Concrete of M-20 grade concrete, produced from approved microprocessor controlled automatic batching plant, in levelling course of foundation for bridge with machine crushed graded stone aggregate and sand of approved quality including all lead & lift, dewatering, transporting, placing , compaction, curing of concrete including using all types of form work, shuttering, centering, scaffolding, etc. complete with all contractors labour, cement, material, construction chemicals such as plasticizer, retarder etc, plants & machineries with all lead & lift complete as per technical specifications. (Minimum content of Ordinary Portland Cement and Fly Ash/GGBS shall be 300 Kg and 50 Kg per cum of concrete respectively and Maximum Water Cement Ratio 0.42). |
| 23 | Providing and Laying design mixed Reinforced Cement Concrete produced from approved microprocessor controlled automatic batching plant for RCC work with Maximum aggregate size of 20mm crushed graded stone aggregate and sand of approved quality including all lead & lift, dewatering, weigh batching, mechanical mixing, compaction, curing including using all types of form work, shuttering, centering, scaffolding, providing necessary arrangement for fixing OHE mast & bolts etc. complete with all contractors labour, cement, material, construction chemicals such as plasticizer, retarder etc, plants & machineries with all lead & lift complete as per technical specifications.. (Minimum content of Ordinary Portland Cement and Fly Ash/GGBS per cum of concrete shall be 350 Kg and 80 Kg respectively and Maximum Water Cement Ratio 0.40) |
| 24 | Reinforced Cement Concrete of M-35 grade in pile caps, footings, Raft and foundations, etc.,of all types of structures like Buildings, FOBs, Decks, Skywalks, Staircases, Escalators, lifts etc. |
| 25 | Reinforced Cement Concrete of M-35 grade for columns, beams, Lintel beam, walls, pedestals, piers, pier caps etc., of all types of structures like Buildings, FOBs, Decks, Skywalks, Staircases, Escalators, lifts etc. |
| 26 | Reinforced Cement Concrete, of M35 grade for Slab, Midlanding, Chajja, deck slabs/extension to deck slabs of FOBs, Decks, Skywalks, Staircase waist slabs, etc., to be casted with necessary shuttering at all height. |
| 27 | Extra for concrete work in superstructure above floor V level for each four floors or part there of by mechnical means |
| 28 | Extra for using customized Aluminium form work for monolithic construction on RCC members with repetitive usage made up of aluminium sheets/plates of minimum 4mm thickness and grade 6061 (Type-6). The formwork comprises of (a) wall panel, rocker, kicker and internal soffit corner, external soffit corner, external corner, internal corner etc., (b) beam components i.e., beam side panel prop head for soffit beam, beams soffit panel, beam soffit bulk head and (c) deck components i.e. deck panel, deck prop, prop length, deck mid, soffit length, deck beam bar. The panels are held in position by a simple pin and wedge system that passes through holes in the out side rib of each panel. The tolerance of finished panel shall not be less than (-1 mm) and shall conform to IS 14987-1999. Pins and wedges to be made of high grade hot dipped galvanized mild steel. This form work also comprises of M.S. angle iron, \\"Z\\" shaped brackets braced Diagonally at 0.90 to 1.00 mtr. centre to centre on external wall face just the level below on which to lay M.S. square tube panels (Challis) and guard railing supports to form working platform and 40 mm Dia G.I. telescopic adjustable props to support deck formwork and beam soffit panels including de-shuttering the formwork from odd/even level to be shifted/lifted to next alternate odd/even level before which the points and shuttering surface to be thoroughly cleaned, pins greasing and shuttering surface oiling properly before fixing all complete including sealing of gap between kicker plates of wall panel and floors (if any) as per design of formwork as provided by shuttering supplier and as per direction of the Engineer-in-charge including filling and finishing the holes of varied sizes and shapes (left by keys/pins of aluminium form work shuttering while deshuttering) with GP-2 Cementous polymer compound mixed with water in ratio prescribed by manufacturer to form consistent workable dough for pushing it in the holes up to full depth of wall using appropriate tools and finishing smooth all complete as per directions of the Engineer-in-charge.Note:- Payment under this item is uniform for floor & height i.e. inclusive of all lead and lift. |
| 29 | Providing and fixing machine moulded factory made Precast cement concrete solid block Grade C (5.0) with block density more than 1800 Kg/cum in substructure and super-structure including platform walling, conforming to IS: 2185 (Pt. I) as per approved drawing including hoisting and setting in position with cement mortar 1:3 including centering, shuttering, curing and finishing with all lead and lift including crossing of tracks with all safety precautions for working close to track with contractors labour, materials, tools and plants etc complete to the specification & finish as directed by engineer in charge. |
| 30 | Providing and fixing Precast cement Siporex block (AAC Block) in substructure and super-structure in all floors of approved size for wall and raising of area including hoisting and setting in position with ready mix block jointing mortar of approved brand, including centering, shuttering, curing and finishing with all lead and lift with contractors labour, material, tools and plants etc. complete to the specification & finish as directed by engineer in charge. |
| 31 | Extra for block massonary in superstructure above floor 5th level, for each four floorsor part there of by mechanical means |
| 32 | Providing and fixing 18 mm thick granite gang saw cut mirror polished premoulded and prepolished) machine cut for booking counters and window sills, facias and similar locations of required size of approved shade, colour and texture ,laid over 20 mm thick base cement mortar 1:3 (1 cement :3 course sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc complete at all levels with all contractor’s material, labour, tools and plants with all lead and lifts, transportation etc complete. |
| 33 | Providing and fixing 18-20 mm thick machine cut granite stone slab of approved colour for flooring laid on 20mm thick 1:3 cement sand mortar and jointed with epoxy pigments to match the colour of stones and as per the approved pattern using approved binding agent with all contractor’s material, labour, tools and plants with all lead and lifts, transportation etc complete. Note: Payment for edge moulding, groove cutting and treatment to granite stone such as flaming, leather polish, etc. to make it non slippery with all contractor's labour, tools, plant, consumable etc. complete with all lead and lift is done separately under relevant Item. |
| 34 | Extra for providing edge moulding to 16mm to 20mm thick marble/granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by the Engineer-in- Charge. |
| 35 | Extra for providing edge moulding to 16mm to 20mm thick marble/granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by the Engineer-in- Charge. |
| 36 | SCHEDULE B - Any Other CPWD DSR 2023 ItemsFor detail description of item refer tender document |
| 37 | Provision for any other incidental items required for successful completion of work as per applicable cost Index of Mumbai rates of Central Public Works Department Delhi Schedule of Rates 2023. Note :- The rates mentioned in the CPWD DSR are inclusive of 18% GST. Accordingly, while considering rates for payment:• The base rate of the item shall be derived by dividing the CPWD DSR rate by 1.18.• This base rate will then be modified by the accepted percentage rate of the contractor.• GST shall be paid over and above this modified amount. TOTAL SCHEDULE B |
| 38 | SCHEDULE C - Fire Fighting ItemsFor detail description of item refer tender document |
| 39 | BOOSTER PUMP (A) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS: 1520 (C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS- 325. (D) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered and with anti vibration pads. Pumps shall be Factory Acceptance Test. 900 lpm at 35 m Head |
| 40 | CONTROL PANELS Fabrication, supply, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection for fault indication, complete as per specification Panel shall be Factory Acceptance Test. with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : Incomings 400A, 50kA 4 Pole MCCB, Ics=100% Icu Rating Digital Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500 Amps Outgoings ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump 200 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 100 hp pump with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. -2 sets Jockey Pump100 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets DIESEL ENGINE CONTROL for diesel engine comprising - Automatic/Manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump n sequence as per specification consisting of relays, timers. Sensors, annunciation window. |
| 41 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required: 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 150mm dia 200mm dia |
| 42 | Providing, installation, testing and commissioning of non- return valve of following sizes onfirming o IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc. as required: 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 200mm dia |
| 43 | Providing, installation, testing and commissioning of stainless steel Ystrainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 80mm dia 100mm dia 150mm dia 200mm dia |
| 44 | Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet risercomplete as per specification no. FF-FFA/ARV |
| 45 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheelvalve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. |
| 46 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 47 | Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate,gasket etc of follwing sizes as required 150mm dia |
| 48 | Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass, BSPT, K- factor as per design consideration complete as required. |
| 49 | Providing, installation, testing & commissioning of electric releasetrim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24 volts DC supply complete as required. |
| 50 | Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required. 150mm dia |
| 51 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories: Pendent Sprinkler Upright Sprinkler Horizontal side wall sprinklerHorizontal side wall sprinklerHorizontal side wall sprinkler Concealed sprinkler |
| 52 | Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required. |
| 53 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 1500mm |
| 54 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/1S 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 25 mm 32 mm 40 mm 65 mm 100 mm 150 mm 80 mm |
| 55 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding. excavation & providing cement concrete blocks as supports, anticorrosive treatmentwith coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm. Dia150 mm. Dia 200 mm. dia (wall thickness = 6.3 mm) |
| 56 | Supply, placing, fixing, erection/ laying of following Sizes heavy dutyGI pipe confirming to IS: 1239 or latest amended below/ above the ground. 50mm dia.(Supply, Erection & Commissioning) 80mm dia.(Supply, Erection & Commissioning) 200 mm dia.(Supply, Erection & Commissioning) |
| 57 | Providing & fixing flow switch in following sizes M.S. pipe includingconnection etc as required. 100 mm dia 150 mm dia |
| 58 | Supplying, fixing, testing and commissioning of butterfly valve of PN1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required: 40 mm dia 50mm dia 65 mm dia 80 mm dia 100 mm dia 150 mm dia 200 mm dia |
| 59 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type A) with blank Gunmetal/Stainless Steel cap and chain as required: Single headed Gunmetal Single headed Stainless steel |
| 60 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) withblank Gunmetal/Stainless Steel cap and chain as required: Single headed Gunmetal Single headed Stainless steel |
| 61 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. |
| 62 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m 40 m |
| 63 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required: Gun metal Stainless Steel (Grade 304) |
| 64 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:Gun metal Stainless Steel (Grade 304) Gun metal Stainless Steel (Grade 304) |
| 65 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: 2 way-100 mm dia M.S. Pipe 4 way - 150 mm dia M.S. Pipe 3 way - 150 mm dia M.S. Pipe |
| 66 | Supplying erecting and commissioning of diesel Engine fire fighting pump, horizontal split casing pump model 2850 LPM is 150metre Head coupled with Suitable HP/1500 rpm radiater cooled engine model 4R 1040T , complete with necessary accessories , pipes mounting stand, engine mounted control panel, battery.12V,-180 AH, 200 Litre fuel tank, First fill of engine oil, coolent and diesel etc. complete assembly for fire fighting system.motor rating M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Pumps shall be Factory Acceptance Test. Pump shall be capable of delivering 150% of the rated capacity IE3 MOTOR Suitable cement concrete foundationduly plastered with anti vibration pads. |
| 67 | Supplying and installing, testing, perfect aligning and proper leveling and commissioning of Centrifugal type pump, of2850 LPM is 150metre Head coupled with Suitable HP Main Fire pump & Main Sprinkler split case Pump.motor rating M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Pumps shall be Factory Acceptance Test. Pump shall be capable of delivering150% of the rated capacity IE3 MOTOR Suitable cement concrete foundation duly plastered with anti vibration pads. |
| 68 | Supplying installing, testing, commissioning of Vertical Inline Centrifugal type pump, of 180 LPM is 150metre Head coupled with Suitable HP Main Fire pump Jockey & Main Sprinkler Jockey Pump.motor rating M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Pumps shall be Factory Acceptance Test. Pump shall be capable of delivering 150% of the rated capacity IE3 MOTOR Suitable cement concrete foundation duly plastered with anti vibration pads. |
| 69 | Supplying, installing, testing and commissioning push button station complete as per EIC & specification Electric spring return enclosed push button NO,NC, polycobonate Red/Green I/O IP66 with control panel & cabling from push button to control panel |
| 70 | Providing coating of Bitumen Paint & 4mm thick Wrapping as per IS10221 for underground 150 mm Ring Main of Fire Fighting System. |
| 71 | Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8\\"x6\\") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) |
| 72 | Supply and fixing hand held fire extinguisher (Co2) gas type 5/6 Kg capacity complete with refill, full length back bracket, hose and clipmounted on wall with suitable mounting arrangement as per IS: 2878 with latest amendment at the time of inspection. (Supply) |
| 73 | Supply and fixing hand held fire extinguishers Dry chemical powder type 5/6 Kg capacity with carbon dioxide cartridges complete with refill, full length back bracket, hose and clip mounted on wall as per IS: 2171 with latest amendment at the time of inspection. (Supply) |
| 74 | FIRE SEALANT SYSTEMSupplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification noFF- FRM. |
| 75 | Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by theauthority. |
| 76 | Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8\\" x 6\\") and locking arrangement with necessary fixing material such as rubber bidding etc.duly painted in post box red colour. |
| 77 | Supplying and fixing ISI grade approved 9/10 Liters capacity galvanised round fire bucket painted Red and lettered 'FIRE' on each bucket. The cost include for bracket/rod to hang the bucket on a wall or pillar or on stand (3 Nos. buckets in each stand) as per IS: 2546 with latest amendment. (Supply) |
| 78 | Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and dulypainted with one coat of red lead and two coats of silver paint complete. |
| 79 | Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF- FFA/PG TOTAL SCHEDULE C |
| 80 | SCHEDULE D - General Electrification WorkFor detail description of item refer tender document |
| 81 | Supplying all materials including wires, multiple loading/ unloading, storing, handling, fixing, laying, wiring and testing of one light, ceiling/ exhaust/ bracket fan/call bell on Angular/vertical holder/PVC blocks in Conceal/casing capping starting from the switch board to the point terminated in ceiling rose with earth connection as detailed below, flush type MS Boxes of required modules, electronic fan regulator/ bell (Supply cost of fan regulator/ bell is not covered in this item but erection & commissioning on switch board is included), together with wiring accessories such as 6A modular flush type switches in manufacturer's boxes of suitable sizes with wrap around front plates, modular door bell push button near entrance in separate flash type MS boxes including circuit wiring with 2 x 2.5 sq.mm 1100 volts grade PVC insulated unsheathed multi strand copper conductor single core flame retardant (FLRS) class 2 cable along with one run of 2.5 sq.mm PVC insulated (green colour) stranded FLRS class 2 earth wire complete as per IS: 694/ IS 3043 with latest amended with earthing of fixtures, sockets, ceiling roses and boxes PVC bushes for conduits ends, screws, complete in all respects as per standard specifications. The phase & Neutral wires may be terminated in a ceiling rose near the location of fan/ fitting. |
| 82 | One light, ceiling/ exhaust/ bracket fan/call bell point controlled by one 6 A modular flush type switch in PVC conduit / flexible conduit with joints bends etc. and run from switch board to light/ fan/ exhaust fan/bracket fan etc. including all material required for fixing arrangement. (Supply, Erection & Commissioning) |
| 83 | One 6 amps 5 pin universal socket with safety shutter outlet controlled by one 6 amps switch. Wiring shall be with 2x2.5 + 1x2.5 sq.mm. 1100 volts grade PVC insulated unsheathed multi strand copper conductor single core flame retardant (FRLS) class 2 cable as per IS: 694/ IS 3043 with latest amended. If 6 amps 5 pin universal socket with safety shutter is located on same switch board, then it will be considered as half point.(Phase ,Neutral,earthing wires should be 2.5 sq mm). |
| 84 | Half point (Supply, Erection & Commissioning) |
| 85 | Full point (Supply, Erection & Commissioning) |
| 86 | Supplying all materials, multiple loading/ unloading, storing, handling, laying, testing & commissioning and wiring for 250 volts single phase and neutral 16 amps switch & universal socket outlet with 2x2.5 + 1x2.5 sq.mm. 1100 volts PVC insulated unsheathed multi strand copper conductor single core flame retardant (FLRS) class 2 cable as per IS: 694/ IS 3043 with latest amended with latest amendment from distribution boards, in concealed heavy duty PVC conduit, conduit accessories including providing and fixing of 6/16 amps switch & universal sockets with safety shutter of modular type ( with manufacturer MS boxes & wrap around front plates) of approved make and design & earthing the third pin of the socket outlet with 2.5 Sq.mm PVC insulated copper stranded conductor FRLS cable (one socket outlet shall be connected with one circuit from MCB DB). The cost of wiring other switch boards and outdoor lights from DB will be paid under this item on flat rate basis. Looping amongst switch Board will not be paid separately. (Supply, Erection & Commissioning) |
| 87 | Supply all materials, multiple loading/ unloading, storing, handling, wiring, testing & commissioning of 250 volts single phase and neutral 20 amps DP MCB and modular metal plug & socket point in company made modular switch board. The wiring shall be with 2x6 sq.mm. FRLS insulated copper conductor 1100 volts grade PVC insulated unsheathed multi strand copper conductor single core flame retardant (FRLS) clas 2 cable as per IS: 694/ IS 3043 with latest amendedin surface/ concealed from distribution board in concealed rigid heavy duty PVC Conduit with all accessories and running earthing with 2.5 sq.mm. 1.1 kV copper conductor, PVC insulated FLRS cable, green colour, connected to all metallic point on separate metallic switch board. (Supply, Erection & Commissioning) |
| 88 | Supplying all materials, multiple loading/ unloading, storing, handling, laying, testing & commissioning and including wiring for two to Four light point or sub-main wiring to switch board controlled by one 6-32 Amps Miniature Circuit Breaker in DB outdoor /gate/landscaping lights including pipe, fixing etc. for with 2x4+1x2.5 sq mm PVC insulated unsheathed multi strand copper conductor single core flame retardant (FRLS) class 2 cable 1100 volts grade as per IS: 694/ IS 3043 with latest amended in concealed/ surface mounted MS conduit including cost of circuit wiring from distribution board but controlled by SP MCBs in DB (Cost of MCB not to be included here). (Supply, Erection & Commissioning) |
| 89 | Supplying all materials, multiple loading/ unloading, storing, handling, installation, testing & commissioning of Fibre/PVC junction box with termination & connection of cable by loop in loop out method. Fibre/PVC junction box, medium size and having terminal for the termination of 3 phase cable & neutral and a cut out of 15 amps with cable gland, nut, bolt, suitable HD PVC/ Flexible pipe for cable protection, etc. as per site condition with all accessories/ GI nut, bolt, hardware, material/painted MS angle, channel/ bracket for fixing/ Installation, HD PVC/ Flexible pipe etc., the cost of which is included in this item. EARTHING |
| 90 | Supply of all material, multiple loading/ unloading, storing, Installation, testing, commissioning of following type of earthing with RCC/ brick chamber, funnel covered with C.I/ RCC cover, bolts, nuts for connection to pipe, alternate layer of salt & charcoal at height/ depth of 150 mm all around as required: |
| 91 | Copper earth plate 610mm x 610mm x 3.15mm thick earthing complete as per relevant relevant IS Specification/ Railway requirement a) Supply b) Erection & Commissioning |
| 92 | Supply of all material multiplal loading / unloading, storing, installtion, testing, commissioning of maintenacefree earth using copper coated steel rods, compression couplers as per latested Indian.international specification & generally confirming to RDSO specification No RDSO/spn/197/2008 or latest ammended or as per relivent latest IS specifications with approved earth enhancing compond & exothermic welding. |
| 93 | a) Supply |
| 94 | b) Erection & Commissioning |
| 95 | Supplying, multiple loading/ unloading, storing, laying, testing & commissioning of the following earth strips on surface/ wall/ on floor/ cable tray/recess or 0.5m below ground level for electrical equipment to be used as strip electrode complete with all accessories including insulation/ insulator arrangement for earth ring main in cubical as required. (NOTE:- The cost of digging and making surface as original is included in the item) |
| 96 | 25 x 6 mm thick GI strip (Weight 1 Meter=1.25 Kgs) (Supply, Erection & Commissioning) |
| 97 | Supplying, multiple loading/ unloading, storing, laying, testing & commissioning of the following SWG wires on surface or recess for loop earthing with all accessories complete required as per relavant specification: |
| 98 | 8 SWG Cu. Wire (Weight 1 Meter=0.125 Kgs) (Supply, Erection & Commissioning) |
| 99 | 6 SWG GI Wire (Weight 1 Meter=0.182 Kgs) (Supply, Erection & Commissioning) CABLE WORKS |
| 100 | Supplying, multiple loading/ unloading, storing of following sizes ISI marked FRLS aluminium conductor, cross linked, HR PVC Inner sheath Extruded polyethylene. XLPE insulated. HR PVC outer sheathed, armoured with galvanised round steel wire/steel strip, suitable for rated voltage 1.1 kV gradewith thermoplastic inner sheath and confirming to IS 7098 (Part I) 1988 with latest amendment of following sizes: |
| 101 | 4 core 120 sq mm Al. Cable (Supply) |
| 102 | 4 core 50 sq mm Al. Cable (Supply) |
| 103 | Single core 10 sq mm FRLSH Cu flexible Cable (Supply) |
| 104 | Erection testing and commissioning for meter to indiviual staff quater in bldg. |
| 105 | Supplying, multiple loading/ unloading, storing, of following sizes ISI marked copper flexible conductor PVC insulated for rated voltage 1.1 kV grade and confirming to IS: 694 with latest amendment of following sizes: |
| 106 | 3 core 4 sq.mm Cu. PVC sheathed cable (Supply) |
| 107 | 3 core 2.5 sq.mm Cu. Flexible cable (Supply) |
| 108 | 4 sq.mm Cu. Flexible cable FRLS (Supply)(colour code to be followed) |
| 109 | Erection testing and commissioning for DB board to indiviual 15 Amp/20Amp switch socket boards. |
| 110 | Supply, multiple loading/ unloading, storing, providing, making, fixing, installation, testing and commissioning of straight through joints of approved make for following size of Al XLPE insulated PVC sheathed cable of 1.1 kV grade as required. |
| 111 | 4 core 120 sq mm Al. Cable a) Supply b) Erection & Commissioning |
| 112 | 4 core 50 sq mm Al. Cable a) Supply b) Erection & Commissioning |
| 113 | Transportation to site from client/ Contractors store, multiple loading/ unloading, storing, temporary storage, laying, testing and commissioning of various cables upto & including 70 sq.mm as per item C (1) and C (2) on wall/ Cable duct/ pipe/ tray/ in trench as required with necessary accessories, such as fixing clamps, saddles, gland, gland plate, lugs, nut, bolts, washers, clamps etc. The cost also includes payment of GST/ Levies if any (only cable tray including accessories will be paid separately). (Supply, Erection & Commissioning) |
| 114 | Extra for excavation of cable trench/ microtunneling in all types of soil including Concrete roads , hard rock, under road/pathway/ platform/ tracks as follows: |
| 115 | 1.0 M deep 0.4 M wide cable trench, providing with cleaned sieved earth 100 mm above & 100 mm below cable, back filling the trench, levelling and consolidating to original formation/condition. Proportionate payment will be paid if trench size is different from specified. NOTE: No extra payment will be made if work is carried in power/ traffic block. Bidder to quote accordingly. (Supply, Erection & Commissioning) |
| 116 | Extra for Supply, multiple loading/ unloading, storing. placing, fixing and laying of following sizes RCC NP-4 class concrete pipe as per IS: 458 with latest amendment under roads, pathway, tracks (With or without power block) etc. and collarjointed with cement mortar (Two Half round, if provided, will be considered as one full pipe) as per site requirement |
| 117 | 100/150 mm diameter 2.0 m (Supply, Erection & Commissioning) |
| 118 | Supply, placing and grouting of cable route markers at 30 M spacing, at bends, ends and joints (Supply, Erection & Commissioning) |
| 119 | Supply, placing, fixing, erection/ laying of 50 mm. HD PVC flexing corrugated pipe below/ above the ground. (Supply, Erection & Commissioning) |
| 120 | Supply, placing, fixing, erection/ laying of following Sizes heavy duty GI pipe confirming to IS: 1239 or latest amended below/ above the ground. |
| 121 | 50mm dia.(Supply, Erection & Commissioning) LIGHTING FIXTURES, CEILING/ EXHAUST/ BRACKET FANS, EXTERNAL LIGHTING, EQUIPMENTS: |
| 122 | Supply, multiple loading/ unloading, storing, installation, testing & commissioning of weather proof IP 65 self-ballasted following lamp or luminaire lighting fixture of approved make for platform/ FOB/ skywalk/ buildings etc. LED shall have life of minimum 50000 burning hours. These fixtures are to be commissioned/ mounted on hanging / suspended as per the direction of site engineer. The cost includes all fixing accessories/ GI nut, bolt, hardware, material/painted MS angle, channel for bracket as per roof design, welding/ hardware required for fixing, including wires for connection etc. The cost shall also include manufacturers extended warranty for 3 years after warranty of 2 years for replacing part against any defects. |
| 123 | Supply, installation, testing and commissioning of 20W LED tube light fitting IP 20 complete with tube and all accessories. The contractor shall provide the mounting arrangement for fittings as required at site and as per technical specification shown in Para (B) of Annexure. SUPPLY ERECTIUON |
| 124 | Supply, multiple loading/ unloading, storing, installation, testing & commissioning of following self-ballasted constant current lamp or luminaire LED Well/ ball/ Street lighting fixture corrosion resistant, impact proof IP 65 with all accessories/ GI nut, bolt, hardware, material/painted MS angle, channel/ bracket for fixing/ Installation including wires for connection, the cost of which is included in this item. LED shall have life of minimum 50000 burning hours. The cost shall also include manufacturers warranty for 5 years for replacing part against any defects |
| 125 | 4W-10W LED Night lamp/step light a) Supply b) Erection & Commissioning |
| 126 | Supply, multiple loading/unloading, storing, installation, testing & commissioning of IP 65 self-ballasted constant current lamp or luminaire 9W-13W LED with all accessories/ material/painted MS angle, channel/ bracket for fixing/installation, GI nut, bolt, hardware, clamps including wires for connection etc., the cost of which is included in this item. LED shall have life of minimum 50000 burning hours. The cost shall also include manufacturers warranty for 5 years for replacing part against any defects |
| 127 | 9W-13W LED -BLUCKHEAD SUPPLY ERECTION |
| 128 | Supply, multiple loading/ unloading, storing, installation, testing & commissioning of following Energy efficient dust free IS marked/ BLDC motor ceiling fan with two ball bearing, condenser, Canopy as required, down rods, hooks, bushing, clamps, nuts/Bolts, double module 5 step electronic regulator rating 230 volts, noiseless, smooth in operation, modular plate mounting, socket shaped with all accessories/GI nut, bolt, hardware, material/painted MS angle, channel/ bracket for fixing/ Installation including wires for connection, the cost of which is included in this item. |
| 129 | 1200 mm sweep 3 blade ceiling fan a) Supply b) Erection & Commissioning |
| 130 | Extra for supply, erection, testing, commissioning of long length down rod of minimum 2mm thick heavy duty GI pipe for suspension of ceiling fan to maintain uniform level from floor. (Erection) |
| 131 | Supply, multiple loading/ unloading, storing, erection, installation, testing and commissioning of 400 mm sweep bracket fan of approved make with bird screen on wall / column mounting type complete with painted MS brackets if any for fixing/ installation and suitable for operation with 230V, 50 Hz. The cost includes all fixing accessories/ GI nut, bolt, hardware, material/painted MS angle, channel for bracket as per column / wall design, welding/ hardware required for fixing, including wires for connection etc. for mounting of bracket fans. |
| 132 | a) Supply |
| 133 | b) Erection & Commissioning |
| 134 | Tube light 2 feet 10 W LED FOR BATHROOM |
| 135 | Supply, multiple loading/ unloading, storing, installation, testing & commissioning of musical electric call bell as per approved sample with all accessories/ material for fixing/ Installation including wires for connection, the cost of which is included in this item. (Erection) |
| 136 | Supplying all materials, multiple loading/ unloading, storing, handling, installation, testing & commissioning of instantaneous type geyser ISI marked of repute make (Bajaj, Recold, Havells or similar approved make) 3KW heating element & 1 Litre. Capacity in bathroom including connecting to water supply line. The cost also includes all accessories/ GI nut, bolt, hardware, material/painted MS angle, channel/ bracket for fixing/ Installation including wires for connection etc. The cost shall also include manufacturers warranty for 5 years for replacing part against any defects. |
| 137 | 3KW heating element & 1 Ltrs Instant type a) Supply b) Erection & Commissioning |
| 138 | Submersible Pump Sets |
| 139 | 3 HP, 2.2 KW suitable for 50x40 mm size pipe with discharge 290-100 LPM at 27-36 M head a) Supply b) Erection & Commissioning |
| 140 | Submersible pump set 7.5 HP, 300LPM, Head 100 M a) Supply b) Erection & Commissioning FOB/ CIRCULATING AREA LIGHTING |
| 141 | Supply, multiple loading/ unloading, storing, erection, testing and commissioning with planted type foundation following length steel tubular Swaged Straight tubular pole (410-SP-2 ) made from 42 kgf/ sq.mm. Tensile strength with single/ double arm as per site requirement confirming to IS 2713 part II complete with FRP junction box for looping, locking arrangement, MCB, terminal, links, earth connected welded bolts, 2C x 2.5 sq. mm. copper FRLS PVC cable inside the pole, G.I. wires etc. as directed by Engineer in charge: (complete pole assembly to be hot dip galvanised ). The cost also includes single/ double arm, all accessories/ GI nut, bolt, hardware, material, HD PVC/ Flexible pipe, digging and M15 grade foundation etc., required for fixing/ installation. |
| 142 | 4.75 M a) Supply b) Erection & Commissioning |
| 143 | Supply, multiple loading/ unloading, storing, installation, testing & commissioning of following self-ballasted constant current lamp or luminaire street light outdoor luminaries minimum IP 66 of approved brand for pathway light/ skywalk to be installed & commissioned on 4.75/ 7.50 M/ 9.00 M swaged pole or corner of the buildings with all required accessories such as angular pipe, clamps etc. and internal wiring with 2.5 sq.mm cooper FRLS wire. The cost includes necessary fixing arrangement, all accessories/ GI nut, bolt, hardware, material for fixing/ Installation including wires for connection etc. LED shall have life of minimum 50000 burning hours. The cost shall also include manufacturers warranty for 5 years for replacing part against any defect. |
| 144 | LED 45W - 50W, Stereet light, IP-66 a) Supply b) Erection & Commissioning |
| 145 | Fabrication, supply, multiple loading/ unloading, storing, fixing, testing and commissioning of Edge lighting LED fixture in clear acrylic sheet of 10mm thick size 46cmx30cm for booking window. LED provided shall be of approved make and connected on 230V AC, 50 Hz. LEDs shall having of life 50000 burning hours approximately with provision of heat sink and driver shall be fixed including power cord of 5 Amps, 10 Mrs. long 3Cx 2.5Sq.mm. PVC FRLS flexible with copper conductor, fixing /erection / hanging arrangement with GI strips only as per site condition the cost of which is included in the item. The cost includes necessary fixing arrangement, all accessories/ GI nut, bolt, hardware, material required for fixing/ Installation. The cost shall also include manufacturers warranty for 5 years for replacing part against any defects including LED/PCB etc. |
| 146 | a) Supply |
| 147 | b) Erection & Commissioning CUBICLE PANEL/ LT PANEL/ATS/TPN/DISTRIBUTION BOARDS |
| 148 | Design, fabrication, Supply, multiple loading/ unloading, storing, installation, fixing, testing & commissioning of factory built and assembled LT Panel board with suitable capacity voltmeter, ammeter on incomer MCCB/MCB, copper bus bar with operating Handle, Phase barrier, DPX spreader Links, etc. (IP 54 type) as required and complete in all respect with breaking capacity at 415 V AC, 50 Hz. The cost also includes for all accessories/ GI nut, bolt, hardware, material/painted MS angle, channel/ bracket, HD PVC/ Flexible pipe, using M15 grade cement concrete grouting etc., required for fixing/ installation on minimum one foot above the floor level. The design of panel should be as per IS:8623, IS:13947, IEC 60947, EN 60947 and GB 14048-2 or latest amended/ revised. (MCB shall be C/D curve as per site requirement) |
| 149 | Incomer: 250A 4P MCCB Microprocessor release breaking capacity 36 kA- 2Nos. Automatic Changeover Switch: 250A with inbuilt Time delay, primary protection against single phasing, over voltage- 1 No Busbar: 300A. Outgoing: 16A-63A 4P MCCB breaking capacity 16 kA each thermal magnetic release- 6 Nos. a) Supply b) Erection & Commissioning |
| 150 | Incomer: 250A 4P MCCB thermal magnetic release capacity 36 kA- 1 Nos. Busbar: 250A. Outgoing: 100A 4P MCCB breaking capacity 16 kA thermal magnetic release- 1 Nos. 16A-63A 4P MCCB breaking capacity 16 kA thermal magnetic release- 4 Nos. a) Supply b) Erection & Commissioning |
| 151 | Design, fabrication, Supply, multiple loading/ unloading, storing, installation, fixing, testing & commissioning of factory built (OEM) and assembled LT Distribution board having incomer MCCB/MCB, copper bus bar with operating Handle, Phase barrier, DPX spreader Links, etc. (IP 54 type) as required and complete in all respect as per site requirement with breaking capacity at 415 V AC, 50 Hz. The cost also includes for all accessories/ GI nut, bolt, hardware, material/painted MS angle, channel/ bracket, HD PVC/ Flexible pipe, using M15 grade cement concrete grouting etc., required for fixing/ installation on minimum one foot above the floor level or on wall or column or concealed. as per direction of site incharge. The LT distribution board shall be as per IS/8623/ IS 13947 or latest amended/ revised. (MCB shall be C/D curve as per site requirement) |
| 152 | Distribution board: 12 way TPN Incomer: 63A 4P MCB breaking capacity 10kA-1 No. Outgoing: 6A-32A MCB DP 10 kA breaking capacity - 18 Nos. a) Supply b) Erection & Commissioning |
| 153 | 40 amp DP RCBO type AC cricuit breaker with integral over- current protection,30 mA sensitivity DP |
| 154 | a) Supply |
| 155 | b) Erection & Commissioning |
| 156 | Supply, installation, testing and commissioning of double door distribution board having 1 No. 40 Amp.100 mA sensitivity RCBO DP as incoming and 4 Nos. 20 Amp. MCB DP and 2 Nos. 16 Amp. MCB SP as outgoing with all accessories as per technical specification shown in Para (F) of Annexure. |
| 157 | a) Supply |
| 158 | b) Erection & Commissioning |
| 159 | Supply, multiple loading/ unloading, storing, installation, fixing, testing & commissioning of factory built (OEM) and assembled following capacity panel /wall mounted Auto Changeover Switch in SS enclosure with inbuilt Time delay, primary protection against single phasing , over voltage under voltage etc. complete in all respect cost of which is included in the item. The cost also includes for all accessories/ GI nut, bolt, hardware, material/painted MS angle, channel/ bracket, HD PVC/ Flexible pipe, using M15 grade cement concrete grouting etc., required for fixing/ installation on minimum one foot above the floor level/wall. |
| 160 | 440 volts 4 pole 100A a) Supply b) Erection & Commissioning |
| 161 | 440 volts 4 pole 200A a) Supply b) Erection & Commissioning |
| 162 | Supply, multiple loading/ unloading, storing, installation, fixing, testing & commissioning of factory built (OEM) and assembled following capacity 4P C curve 10 kA breaking MCB in SS enclosure including all accessories/ GI nut, bolt, hardware, material/painted MS angle, channel/ bracket, HD PVC/ Flexible pipe, etc. required for fixing/ installation the cost of which is included in the item |
| 163 | 40A-63A 4P MCB a) Supply b) Erection & Commissioning |
| 164 | 6A-32A DP MCB a) Supply b) Erection & Commissioning |
| 165 | Supply, multiple loading/ unloading, storing, installation, fixing, testing & commissioning of factory built (OEM) and assembled following capacity MCCB in enclosure with rotary handle including all accessories/ GI nut, bolt, hardware, material/painted MS angle, channel/ bracket, HD PVC/ Flexible pipe, etc. required for fixing/ installation the cost of which is included in the item |
| 166 | 250A 4P 36 kA breaking capacity MCCB a) Supply b) Erection & Commissioning |
| 167 | 63A- 100A 4P 16 kA breaking capacity MCCB a) Supply b) Erection & Commissioning MISC. ITEMS |
| 168 | Supply, Fixing, testing & commissioning of 12 mm thick marine wood plank on the wall with M.S. framework to accommodate 3 phase energy meter- 1 No. & cut-outs/MCCB of power supply authorities, 3 phase Metal enclosed SFU, suitable size bus bars along with earth strip, internal wiring with multistranded insulated copper conductor as per the requirement of power supply authorities. The meter box shall have marine wood plank on pained M.S. framework on all sides with biparting lockable doors with painted M.S. Jali on the front doors, all as per approved drawings and as directed. The cost of bus bar, earth strip, wires/cables, all accessories/ GI nut, bolt, hardware, material/painted MS angle, channel/ bracket, HD PVC/ Flexible pipe, etc. required for fixing/ installation is included in the item. (Erection) |
| 169 | Provision of furniture/ Office equipment details as per explanatory notes. (Supply) |
| 170 | Providing Container for storage of electrical material at site by contractor. Rate includes contractors material, electrical supply, local tools & plants, transport, loading/unloading, watch & ward, all lead & lifts and taxes etc. complete in all respect |
| 171 | Providing security services for store material at site one guard in each shift of 8 hrs. including Sundays & holidays. (One man-day is equivalent to one shift of 8 Hrs. duration) (Unskilled) (Supply) |
| 172 | Providing fully furnished Porta cabin with partition & urinal on hire of minimum size 6.1mx3.05m fully wired, one Table with executive Chair, two Visitor chairs, small almarah, 1 Ton AC etc. in one side of partition and 1 big table with six chairs on other side of partition as directed by Engineer. Rate includes contractors material, electrical supply, local tools & plants, transport, loading/unloading, watch & ward, all lead & lifts and taxes etc. complete in all respect (Supply) |
| 173 | Supply and fixing hand held fire extinguisher (Co2) gas type 5/6 Kg capacity complete with refill, full length back bracket, hose and clip mounted on wall with suitable mounting arrangement as per IS: 2878 with latest amendment at the time of inspection. (Supply) |
| 174 | Supply and fixing hand held fire extinguishers Dry chemical powder type 5/6 Kg capacity with carbon dioxide cartridges complete with refill, full length back bracket, hose and clip mounted on wall as per IS: 2171 with latest amendment at the time of inspection. (Supply) POWER SUPPLY AUGMENTATION |
| 175 | Verification of HT/LT cable/ ariel route plans of all incoming & outgoing cables/ transmission line of 33kV/22kV/11 kV/2.2kV cable of Railways/ power supply authorities (As available), preparation of final cable/ transmission line route plans of both HT/LT cable showing relevant details for approval before start of the work and submission of as built drawings. (Erection) |
| 176 | Transportation to site from client/ Contractors store, multiple loading/ unloading, storing, temporary storage, laying, testing and commissioning of various cables above 70 sq mm as per item C (1), C (2) & M (6) on wall/pole, Cable duct/ pipe/ in trench as required with necessary accessories, such as fixing clamps, saddles, gland, gland plate, accessories/ GI nut, bolt, hardware, material/painted MS angle, channel/ bracket, lugs, washers, clamps etc. The cost also includes payment of any tax during transportation if any (Only cable tray, pipes, Parmali cleats & their installation accessories will be paid separately). (Erection) |
| 177 | Supply, transportation, multiple loading/unloading, storing, installation and providing ISI marked electrical 33kV grade 12 mm thick anti skid rubber mat as IS 15652.2006 or latest amended. ELECTRICAL SAFETY ENFORCER |
| 178 | H T/LT Power Line Protection Supervisor (Semi Skilled) |
| 179 | Daily Document Entry/Recorder operator/ Site assistance (Skilled/Clerical) |
| 180 | Electrical Design Developer/ Electrical Draftsman/Lineman/Wireman (Highly Skilled) |
| 181 | One passenger safety enforcer/Site Engineer |
| 182 | One Site Safety enforcer/Site Supervisor. DIESEL GENRATING SET |
| 183 | Supply, transportation, multiple loading/unloading, storing, installation, testing and commissioning of following capacity Silent Green Diesel Generator Set 3 phase 415 volts 50 cycle per second complete with air cooled turbo charged Diesel Engine, Alternator with AMF panel. The cost shall includes all accessories such as fixing clamps, saddles, gland, gland plate, GI nut, bolt, hardware material lugs, washers, clamps, connection to main supply system, rectification/ modification civil work to existing foundation/ Pedestal etc. required for fixing/ installation. |
| 184 | 125 KVA SUPPLY |
| 185 | Self supported Aluminium type ladder 6 ft when closed and other required accessories of approved make (Supply) |
| 186 | Self supported 10 Feet high folding type Alum. ladder |
| 187 | Smart tool kit |
| 188 | Megger (motorised) 1100V DC |
| 189 | Digital Clampmeter along with standard accessories (Model DCM 1500 ofM/s Megger or equivalant) (Supply) MODIFICATION/INFRINGEMENTS OF POWER SUPPLY UTILITES |
| 190 | Supply, multiple loading/ unloading, storing, installation / erection of factory built and assembled Mini feeder Pillar on pedestal foundation, GI frame including necessary hardware etc. as per power supply utility's Specification. |
| 191 | a) Supply |
| 192 | b) Erection & Commissioning |
| 193 | Dismantling & cutting of redundant steel structures & other assets, transformers, arial lines, cables, insulators, feeder pillars, LT / HT conductors, high Mast, Panels etc. and transporting to nominated depot/ store/ yard as per power supply utilities's or site supervisor direction. (Erection) Fire dection alarm system in high raise building S+1+15 Storey.: |
| 194 | Supply, transportation, multiple loading/unloading, storing, erection, testing & commissioning of following fire detection alarm system in type III staff Qtrs. building S+1+15. |
| 195 | i. Central Fire Alarm Panel with uploading downloading capabilityand emergency SMS sending capability. |
| 196 | ii. Communication Gatewys |
| 197 | iii. Multi criteriadetector shall be rate of rise temperature-cum-fixed temperature type as per RDSO spec. No RDSO/SPN/217/2018 version 1.0 or latest |
| 198 | iv. Analog addressable rate of rise cum fixed temperaturedetector with standard mounting base, LED address switch complete with M.S. Powder coated jn box for mounting on surface/ on false ceiling/below false ceiling. |
| 199 | v. Manual call Point for fire Alam System |
| 200 | vi. Hooter for Fire Alarm system as per RDSO spec. No RDSO/SPN/217/2018 version 2.0 or latest |
| 201 | vii. Control Input/output Module for Hooter. |
| 202 | viii. Fault isolator modle complete with MS Powder coated junction box for mounting on surface, cable lugs at ends, cable compression glands, cable tags and ferruling UL Listed. |
| 203 | ix. Itelligent Wireless Detector |
| 204 | x. Response indicator with matching screws complete with GI Junction box, cable lugs at cable end and ferruling. |
| 205 | xi. 2 Core x 1.5 sq mm multistrend armord copper zero helogen cable Red in color, laid on surface with GI saddle spacer every 0.3 mtr complete with GI Junction box, lugs compression glands cable tags and ferruling wth relevant ISS & IE Rules. |
| 206 | xii. Automatic Aerosol Based Fire suppression System for Electrical room |
| 207 | xiii. 25 mm dia MMS PVC conduits with all accessories |
| 208 | xiv. Thermal Actuator for Aerosol generator in Electrical room |
| 209 | xv. Fire Control Module, test lamp including all accessories for Aerosol generator |
| 210 | xvi.Testing & commissioning of fire dection system and integration of fire fighting system. |
| 211 | Supply, multiple loading/ unloading, storing, installation/ erection/fixing, testing & commissioning of Lightning Arrestor system in high raise building S+1+15 Storey. |
| 212 | AVIATION LIGHT TOTAL SCHEDULE D Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
