|
| 1 | M&L Hardcore of gauge n exc. 63 mm, broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface incl Demolition, Complete all as specified and as directed. |
| 2 | M&L for Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level use in broken stone or boulder incl demolition, Complete all as specified and as directed. |
| 3 | M&L for 75mm thick PCC 1:3:6 type C2 (using 20mm graded crash stone aggregate)as use in plinth protection etc finished even and smooth with using extra cement and making joint & filled with maxtric incl Demolition, Complete all as specified and as directed. |
| 4 | M&L Forming 6mm thick Expansion joints filled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' . 50mm deep, Complete all as specified and as directed. |
| 5 | M&L for Dark shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed over 100mm Pcc 1:4:8 type D2 using (40mm graded Aggregate) as a sub base incl demolition, Complete all as specified and as directed. |
| 6 | Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sqm each, Complete all as specified and as directed. |
| 7 | Refixing in same opening Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sqm each, Complete all as specified and as directed. |
| 8 | Taking down Chowkhats or frames with shutters n.exc 1.5 sq.m each, Complete all as specified and as directed. |
| 9 | Refixing in same opening Chowkhats or frames with shutters n.exc 1.5 sq.m each, Complete all as specified and as directed. |
| 10 | S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed as use IIst class softwood, Complete all as specified and as directed. |
| 11 | M&L for Glazed and skeleton shutters 1st class softwood 35mm thick shutter open rebated and prepared to receive glass, gauze,etc.(without sash bars),dges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.;sizes of me-mbers of shutters as specified in SSR Part I,Section 8, clause 8.24 (a); supplied and fitted to chowkats, Complete all as specified and as directed. |
| 12 | S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, Complete all as specified and as directed. |
| 13 | S&F for Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each, Complete all as specified and as directed. |
| 14 | M&L for newly wooden Surfaces painting of any description two coat of synthetic enamel paint over one coat of pink primer, not otherwise described, over 10cm width or girth, Complete all as specified and as directed. |
| 15 | M&L for Old wooden Surfaces painting of any description two coat of synthetic enamel paint over one coat of pink primer, not otherwise described, over 10cm width or girth, Complete all as specified and as directed. |
| 16 | S&F for Aluminium anodised,barrel tower bolts 75mm of extruded section and fixed, Complete all as specified and as directed. |
| 17 | S&F for Butt hinges, 50mm long medium weight, cold rolled mild steel, and fixed, Complete all as specified and as directed. |
| 18 | S&F for Butt hinges, 75mm long medium weight, cold rolled mild steel, and fixed, Complete all as specified and as directed. |
| 19 | S&F for Aluminium alloy, anodised,sliding door bolt 200mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, Complete all as specified and as directed. |
| 20 | S&F for Extruded aluminium alloy handles,size of handle in 100mm fabricated type,anodised, Complete all as specified and as directed. |
| 21 | S&F for Extruded aluminium alloy handles,size of handle in 75mm fabricated type,anodised, Complete all as specified and as directed. |
| 22 | M&L for Weather boarding 2nd class softwood, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed.and newly wooden Surfaces painting of any description two coat of synthetic enamel paint over one coat of pink primer incl Dismantling, Complete all as specified and as directed. |
| 23 | Fixing Only for Weather boarding 2nd class softwood, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed. Old wooden Surfaces painting of any description two coat of synthetic enamel paint over one coat of pink primer incl Dismantling, Complete all as specified and as directed. |
| 24 | M&L for Second class soft-wood clean sawn in scantlings.incl dismantling timber scantling 40sqcm and over, Complete all as specified and as directed. |
| 25 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, Complete all as specified and as directed. |
| 26 | M&L for Cement concrete Type D2 1:4:8 (40mm graded aggregate in foundations,filling and mass concrete, Complete all as specified and as directed. |
| 27 | S&F for Galvanised, corrugated mild steel sheeting with two corrugations side lap 0.63 mm thick, fixed with coach screws and washers, in roofs, walls etc.with grade of zinc coating 275.incl Dismantaling and Preparation of new surface and applying two coat of synthic enamel paint over one coat of pink primer, Complete all as specified and as directed. |
| 28 | Refixing for Galvanised, corrugated mild steel sheeting with two corrugations side lap 0.63 mm thick, fixed with coach screws and washers, in roofs, walls etc.with grade of zinc coating 275..incl Dismantaling and Preparation of Old surface and applying two coat of synthetic enamel paint over one coat of pink primer, Complete all as specified and as directed. |
| 29 | S&F for Plain, galvanised, mild steel sheeting 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275.incl Dismentaling and Preparation of new surface and applying two coat of synthetic enamel paint over one coat of pink primer, Complete all as specified and as directed. |
| 30 | S&F for Planed one side & edges tongued and grooved or rebated,25mm thick fix with nails to timber frame work incl necessary fillets size 13 & n.exc 25sqcm..as use in wall and ceiling surface with cover fillets and preparation of newly surface two coat of varnishing finishing coat with synthetic varnish incl Demolition with fillets for Wall and ceilling board, Complete all as specified and as directed. |
| 31 | M&L for Glazed ceramic coloured tiles in vertical surface 450x 350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.as use in dados with 10mm thick rendering in cement mortar 1:4, including dismantling, Complete all as specified and as directed. |
| 32 | M&L for Rendering 10mm thick in cement morter 1:4 on other then fair faces of brick work or concrete surface. Finished even and smooth with out using extra cement.including taking down cement plaster.and preparation of newly plaster surface on wall two coat of cement base paint, Complete all as specified and as directed. |
| 33 | S&F for 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes 20mm outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc incl taking up and down of any type of pipe, Complete all as specified and as directed. |
| 34 | S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, butterfly handle, screwed both ends for iron pipe or for unions and fixed 20mm dia, Complete all as specified and as directed. |
| 35 | S&F Rotational moulded polyethylene water storage tanks capcity 750 litres (cylindrical vertical with closed top) hoisted and fixed in position all specified. Incl Dismantling, Complete all as specified and as directed. |
| 36 | S&F in repair for PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors including Demolition and breaking up drain pipes 100mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, Complete all as specified and as directed. |
| 37 | S&F in repairs 100 mm dia PTMT Grating doom (Minimum weight 25 gms), Complete all as specified and as directed. |
| 38 | Supply & Fix in repairs vitreous china wash basin, white, flat back of size 550 x 400mm including 32mm waste fittings brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, chain and plug and pocelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting stand including supply and fixing of low density ploythelene (LDPE) waste pipe 32mm dia 750mm long complete including providing 15 mm bore dia of pipe fancy Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed and providing PVC connection 15 mm size with PTMT nuts of length 450 mm and CP fancy type Stop cock/Angle 15 mm cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions, Complete all as specified and as directed. |
| 39 | Supply & Fix in repairs vitreous china wash down water closet pan'(Pedestal pattern),along with seat cover white,incl health faucet (ABS Body) with integral foot rests,including connection to trap and to flushing pipe, anti-syphonage pipe, etc,including 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, including flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern and providing PVC connections 15 mm size with PTMT nuts of length 450 mm and CP fancy type Stop cock/Angle 15 mm cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions, complete including making good the floors, Complete all as specified and as directed. |
| 40 | S&F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, Complete all as specified and as directed. |
| 41 | S&F in repair 75 mm out let cast iron floor trap with cp gratting incl jointing to waste pipe fixed in cement concrete type B- 1 (1:2:4), Complete all as specified and as directed. |
| 42 | S&F in repair Tubular towel rail, Aluminium anodised 20mm dia, D type, 60cm long between flanges, complete as specified and as directed. |
| 43 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4. incl Demolition, Complete all as specified and as directed. |
| 44 | Providing, precast cement concrete type B1 1:2:4 (20 mm graged aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match.incl Demolition, Complete all as specified and as directed. |
| 45 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, Complete all as specified and as directed. |
| 46 | S&F in repair for 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joint , laid in trenches or in floors, Complete all as specified and as directed. |
| 47 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160m, Complete all as specified and as directed. |
| 48 | Taking down carefully copper/aluminium point wiring (light, Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surface of walls, floors etc. |
| 49 | M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made rectangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- |
| 50 | (a) One light/fan point/Exhaust fan point controlled by one 5 Amps switch one way. |
| 51 | (b) One 3 pin 5 Amp switch socket combination 5 Amps switch socket oulet on independent board. |
| 52 | (c) One 3 pin 3 Amp switch socket outlet on same board with accessories. |
| 53 | M&L Point wiring complete with FRLS 1100 Volts grade, 2.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 20 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 2.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed |
| 54 | S&F in repair Modular switch single pole, one way 6 amps 1 module 240 volts, complete all as specified and as directed. |
| 55 | S&F in repair Modular switch single pole, one way 16 A 240 volts, complete all as specified and as directed |
| 56 | S&F Socket outlet 2 in 1, 3 pin, 5 Amps,modular type complete with gang box all as specified and as directed |
| 57 | S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, modular type complete with gang box all as specified and as directed. |
| 58 | Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body all as specified and directed |
| 59 | S&F in repairs Distribution Board, SPN 8 Way, Double door complete all as specified and as directed |
| 60 | S & F in repairs MCB,DP 63 Amps 240 Volts B curve, complete all as specified and as directed |
| 61 | S & F MCB Single pole 6-32A Amps 240 Volts B Curve complete all as specified and directed |
| 62 | Supply and fixing LED luminaire round shape 15 watt, 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 63 | S&F LED light fitting 1x10 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 64 | Supply and fixing Inverter LED bulb 12 W, 220V suitable size from ceiling rose, complete all as specified and as directed. |
| 65 | S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as specified and as directed. |
| 66 | Supply and fix modular fan step regulator,120 Watt - 2 module, complete all as specified and as directed. |
| 67 | Supply and Fixing in repair Modular white cover plate with frame, complete all as specified and as directed. |
| 68 | Supply and fix exhaust fan, steel body AC single Phase 230V of size 300m sweep with blades, and frame and louver, complete all as specified and as directed. |
| 69 | S&F electric water heater, storage vertical type outer body Engineering Thermoplastic with puf injected type insulation, Steel tank with glass lined coating inner tank and heating element (copper tube) upto 2 KW capacity 25 litre, 230 volts AC single phase BEE 5 Star rated complete with all accessories such as FR Grade 3 core PVC Cord, multifunctional safety valve, thermostate, connection piece etc, complete all as specified and as directed. |
| 70 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, with two single core cables flat or circular 16 Sqmm 2 core, complete all as specified and as directed. |
| 71 | M & L sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 4 sqmm and one run of 4 sqmm cable and one run of casing capping shall be measured as one RM |
| 72 | M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc. |
| 73 | Note:- Schedule of credit Rs 39,626.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
