|
| 1 | Taking down chokhats or frames including shutters (without taking off shutters from the frame) area not exc 1.5 sqm each and removing from te, complete all as specified and directed. |
| 2 | Taking down chokhats or frames including shutters (without taking off shutters from the frame) exc 1.5 but not exc 4 Sqm each and removing from te, complete all as specified and directed. |
| 3 | Taking down shutters not exc 1.0 Sqm and removing from te, complete all as specified and directed. |
| 4 | Taking down shutters exc 1.0 Sqm but not exc 2.0 Sqm each and removing from te, complete all as specified and directed. |
| 5 | M&L for taking down shutter of any description exc 1 sqm and n exc 2 Sqm each and refixing in same opening after eang and adjusting complete all as specified and directed |
| 6 | 2nd class hard wood (Sail/Hollock) plain, solid, straight chowkhats or frames, wrought, framed, rebated on solid, rounded or chamfered, put together with glue, pinned with joints with one or more rebates, complete all as specified and directed. |
| 7 | S&F for pressed steel frames of ze 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc and making good the wall with plaster in CM 1:6 complete all as specified and directed. |
| 8 | S& F Pressed steel frames of ze 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, and making good the wall with plaster in CM 1:6 complete all as specified and directed. |
| 9 | M&L for M-10 nominal mix concrete type C0 (1:3:6) ung 12.5mm graded aggregate as in steel door frames complete all as specified and directed |
| 10 | S&F 35mm thick Ist class softwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed. |
| 11 | S & F of 25mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and ze of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part - I (Specifications) complete all as specified and directed |
| 12 | Factory made 2nd class hard wood (Sal/Hollock) plain, framed, panelled 35mm thick shutters (two panels ) with lock rail and panels of 9mm BWP commercial plywood or 12mm veneered particle with commercial face veneers on both des. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated,complete all as specified and directed. |
| 13 | S&F anodised aluminium door shutters aluminum section weighting 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 14 | S&F anodised aluminium window and ventilator shutters de hung type without sash bars, aluminium section weighting 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long, hinges 100mm long suitable handle complete all as specified and directed. |
| 15 | Solid PVC frame (ngle Rebated) of 60mm X 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 X 8 sheet metal CSK screws complete as shown on page No. 176 to 183 of MES SSR 2020 Part-II complete all as specified and directed. (Note - Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life), complete all as specified and directed. |
| 16 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inde with solvent cement for stiles and Plain colour PVC sheet for top rail, lock rail & bottom rail on either de & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at te as per specification compete all as specified and directed |
| 17 | Supply and fixing steel windows with de hung shutters including projecting type hinges with steel handle and steel peg stay compete with glazings bards devetailed or welded complete all as specified and directed. |
| 18 | Supply and fixing steel ventilators with centre hung shutter including two pairs of brass cup pivoted catch spring and pulley wheel complete all as specified and directed. |
| 19 | Aluminium, anodised, barrel tower bolts of extruded section and fixed with 150mm long bolt, complete all as specified and directed. |
| 20 | Butt hinges, medium weight, cold rolled, mild steel 100 mm long, complete all as specified and directed. |
| 21 | Anodized aluminium alloy handles, fabricated type, anodised or ze 150mm, complete all as specified and directed. |
| 22 | Anodized aluminium alloy handles, fabricated type, anodised or ze 100mm, complete all as specified and directed. |
| 23 | 300mm long anodized aluminium alloy sliding door bolt, bolt type, stove enamelled black, with bright bolt not less 16mm dia, with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on stapple plate, 300mm long, complete all as specified and directed. |
| 24 | Sheet glass 3mm thick ordinary quality and glazing with oil putty/wooden beads in squares, not exc. 0.5 Sqm in each pane, complete all as specified and directed. |
| 25 | S&F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty n exc. 0.5 sqm in each pane, complete all as specified and directed. |
| 26 | Mild steel galvanized wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or wire staples or wooden beads, fixed n repair, complete all as specified and directed. |
| 27 | Preparation of New wooden surfaces of any description and otherwise described over 10 CM width or girth, and applying two coats synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 28 | Preparation of new or previously untreated Steel surfaces of any description not otherwise described over 10 cm width or girth, and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 29 | S&F soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 30 | S & F in repairs Toilet paper holder recessed type stainless steel complete all as specified and directed. |
| 31 | S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 600mm long between flanges complete all as specified and directed. |
| 32 | S&F Glass/PTMT shelf with CP railing fancy type complete all as specified and directed. |
| 33 | S&F Glass/PTMT corner shelf with CP railing fancy type complete all as specified and directed. |
| 34 | S&F (600mm X 450mm) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 X 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 35 | S&F 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated and fixed in repairs, complete all as specified and directed. |
| 36 | S & F 15 mm bore CP brass stop/angle valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 37 | S&F brass chromium plated shower rose 125 mm of ze with arms and with or without swivel joints to steel pipe or union complete all as specified and directed. |
| 38 | S & F 15 mm dia bore CP brass stop valves cast copper alloy (concealed type) complete all as specified and directed. |
| 39 | S&F stainless steel nk with drainage board made of stainless steel of 1mm thick kitchen nk of ze 915 x 460mm bowl ze of 410 x 330 x 160mm with coupling, waste pipe and bracket complete all as specified and directed. |
| 40 | S&F stainless steel plate racks of size 900mmx600mmx250mm having thickness of SS strip 1mm, fixed on wall etc complete all as specified and directed. |
| 41 | S&F health faucet APS body mild steel chromium body plated suitable for 15mm dia pipe with 1.25 mtr flexible tube and ABS wall hook including making connections and fixed in potion.complete all as specified and directed. |
| 42 | S & F in repairs 15mm bore, brass CP central hole WHB mixer / Sink mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 43 | S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with connecting legs & flangs in complete all as specified and directed. |
| 44 | S&F Vitreous China wash ban, angle back, ze 600X450mm white, including cutting for and pinning in ends of brackets or erecting stand including 15mm pillar taps, with 32mm chromium plated waste coupling, waste pipe of bore 32mm, PVC connection pipe 450mm long with brass nuts on both de, fixed in repairs, including brackets complete all as specified and directed. |
| 45 | Supply & fixing Vitreous China ware squatting pan Orissa pattern ze 580 mm X 440 mm, white, with Cast iron P or S trap, front or back inlet, integral footrest complete all as specified, excluding flushing cistern and flush pipe), etc, and making good to floors in repair,complete all as specified and directed. |
| 46 | S & F Vitreous china wash down water closet pan (pedestal pattern), white and trap including connection to drain (or outgng pipe) and flush pipe, antisyphonage pipe, etc seat and cover for pedestal pan, Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in potion all as specified and directed |
| 47 | S&F PVC valve less, crystal white, syphonic action type flushing cistern 10 liter capacity superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32mm dia PVC long bend flush pipe 90cm long and 15mm dia 450 mm long PVC connection with CP brass coupling nuts and PVC washers at bothy ends fixed, in repairs, complete all as specified and directed. |
| 48 | S&F Vitreous china rimless one piece EWC with duroplast slim soft closed seat cover concealed P/S trap, snow white, pedestal pattern with integral vitreous china flushing cistern, size 670 x 355 x 755 mm with provision of plain cement concrete M-15, type B1 using 20mm graded crushed stone aggregate complete all as specified and directed,ncl making connections to trap and to flush pipe. |
| 49 | S & F in repairs CP grating (with or without waste hole), 125 mm ze, fixed on floor/nahani traps etc complete all as specified and directed. |
| 50 | S & F floor door stopper 140mm ze of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed. |
| 51 | S & F Aluminium body door closer hydraulically regulated, degnation No. 2 universal type, suitable for door shutter of wt. between 36 to 60 Kg complete all as specified and directed. |
| 52 | Taking down rain water pipe and eaves gutters (any ze and pattern) including all fittings heads shoes bends swan necks etc, complete all as specified and directed. |
| 53 | S&F n repair 110mm bore PVC (SWR) pipes ngle socketed in any length with rubber ring joints,fixed to walls complete all as specified and directed. |
| 54 | S&F in repair 110mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 55 | S&F in repair 75mm bore PVC (SWR) pipes angle socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 56 | S&F in repair 75mm bore PVC (SWR) pipes angle socketed in any length with rubber ring joints laid in floors or in trenches complete all as specified and directed. |
| 57 | S&F in repair 75mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 58 | M&L for 75mm dia of PVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed. |
| 59 | Dismantling water tanks and removing to store Exc 250 & n exc 500 ltr capacity, complete all as specified and directed. |
| 60 | S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in potion complete all as specified and directed. |
| 61 | S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hidetty plastec ball screwed for iron pipe and fixed complete all as specified and directed. |
| 62 | S&F gun metal gate valves with iron wheel head 15mm complete all as specified and directed. |
| 63 | S&F gun metal gate valves with iron wheel head 20mm complete all as specified and directed |
| 64 | Dismantling of wall & ceiling boarding (fibre, pulp, insulation etc., or insulation board/slab/blankets, any thickness, with nails, including cover fillets and removing from te complete all as specified and directed |
| 65 | S&F false ceiling with fibre cement degner tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS 14862) of ze 595 x 595 mm and any one of the degn (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120gms, both de incluve ) consting of main T runner with suitably spaced joints to get required length and 15x32 mm made of 0.30mm sheet and cross T at 600mm c/c to form a grid including required cutting/making open-ng for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling ung GI soffit cleats fixed to existing rafter, purlin etc with galvanised butterfly level clips, spaced at 1200mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12Kg/sqm and refixed all existing electric wiring and fixture complete all as specified and directed. |
| 66 | M&L 2nd class hardwood plain fillets sectional area exc. 3 Sqcm and n exc. 6 Sqm, square, rectangular or triangular in section, clean sawn, secured with nails of brads, complete all as specified and directed. |
| 67 | Material and labour for 4mm thick non asbestos fibre cement decorative type building boards fixed to timber frame/GI/aluminium frame work fixed with nails as in ceiling flat or sloping, complete all as specified and directed. |
| 68 | M&L solid PVC wall lining consting of 5mm thick plain colour PVC sheet incluve of solvent cement and fixing at te on PVC frame as per specifications and drawing, complete all as specified and directed. |
| 69 | 5mm thick PVC sheet fillet of width 35mm for wall paneling incluve of fixing on to wall to make PVC Frame as per specification, complete all as specified and directed. |
| 70 | M&L for 16/18mm thick Prelaminated Particle board interior grade, prelaminated both de with decorative choice lamination fixed with screws to timber frame work as cup board shutter complete all as specified and directed. |
| 71 | S&F continuous (Piano) hinges mild steel bright finish or electrogalvaneed of 30mm width of flap welded to steel frame or screwed to wooden frame complete all as specified and directed. |
| 72 | S&F 100mm size hasp and staple safety type brass with mild steel hinges pin nd bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 73 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 74 | Dismantling of framed work timber scantlings 40 Sqcm and over in section, in any potion, complete all as specified and directed. |
| 75 | Material and labour for 2nd class hard wood as in scantling framed work as in ceiling, clean sawn timber and fixed in any potion complete all as specified and directed. |
| 76 | Mild steel work as in wind ties for roof including securing bolts, posts and struts n fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc ) including all necessary drilling, bolting or riveting etc., and milar work comforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 77 | Dismantling of corrugated or plain steel sheeting of any gauge thickness, including Nainital or milar pattern roof coverings complete all as specified and directed |
| 78 | Supply & fixing galvanized corrugated mild steel sheeting 0.63mm thick with two corrugations de lap fixed with L-type or J type hooks and washers, in roof, walls etc. with grade of zinc coating 275 gm complete all as specified and directed |
| 79 | All as per item No. 78 above but except sheet, complete all as specified and directed. |
| 80 | Supply & fixing galvanized plain mild steel sheeting 0.63mm thick as in ridges, hips, valley gutters, drip and straight flashings with grade of zinc coating 275 gm complete all as specified and directed |
| 81 | All as per item No. 80 above but except sheet, complete all as specified and directed. |
| 82 | Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of of any colour having tenle strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed. |
| 83 | All as per item No. 82 above but except sheet (any thickness), complete all as specified and directed. |
| 84 | Pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tenle strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed. |
| 85 | All as per item No. 84 above but except sheet (any thickness), complete all as specified and directed. |
| 86 | M&L marble work (Udaipur green slabs) 16 to 18mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) ung marble dust with admixture of pigment to match with marble shade, complete all as specified and directed. |
| 87 | M & L Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other milar tuations complete all as specified and directed |
| 88 | Demolition of Cement concrete (unreinforced) of any description and in any potion not otherwise specifically provided, complete all as specified and directed. |
| 89 | M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc, complete all as specified and directed. |
| 90 | M&L providing 20mm thick plaster in CM 1:4 finished even and smooth mixed with water proofing compound (water proofing compound shall be measured separately), complete all as specified and directed. |
| 91 | Supply only liquid water proofing compound complete all as specified and directed. |
| 92 | PCC M-15, nominal mix, type B-1, ung 20mm graded mechanically crushed stone aggregate as in floors, 25mm thick, finished even and rough to receive floor finishes,complete all as specified and directed. |
| 93 | M&L for (non skd), premium class I grade, coloured ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete, complete all as specified and directed. |
| 94 | Mat finish (non skd), Premium class I grade, coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete,complete all as specified and directed. |
| 95 | Demolition of cement concrete in ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced, complete all as specified and directed. |
| 96 | Dismantling floor, hearth or wall tiling incl cement mortar bedding, complete all as specified and directed. |
| 97 | M&L non skd ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.36 sqm on vertical surfaces such as skirtings/dado etc., set and jointed in neat cement slurry and pointed with white or coloured cement, laid over and including 10mm thick bedding layer in cement mortar 1:4 on surfaces of walls complete all as specified and directed. |
| 98 | M&L for glazed ceramic coloured tiles, premium class I grade, of ze 300mm x 450mm x 7mm thick as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white or coloured cement, laid over and including 10mm thick bedding layer in cement mortar 1:4 on surfaces of walls complete all as specified and directed. |
| 99 | Taking down GI pipe of 15mm bore etc. complete all as specified and directed. |
| 100 | S&F 15mm bore GI tubing medium grade Galvanized with all fittings and fixed complete to walls and ceiling or laid in floor/wall, complete all as specified and directed. |
| 101 | Refixing only old GI tubing 15 mm bore pipe and connections in new or old potion as on walls ceiling floors etc complete all as specified and directed. |
| 102 | Taking down GI pipe of 20mm bore etc. complete all as specified and directed. |
| 103 | S&F 20mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor/wall, complete all as specified and directed. |
| 104 | Refixing only old GI tubing 20 mm bore pipe and connections in new or old potion as on walls ceiling floors etc complete all as specified and directed. |
| 105 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 106 | M&L for 20mm dia Stainless Steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing conduit pipes with accessories complete all as specified and directed. |
| 107 | Demolition of stones or brick masonry built in cement mortar including all quoins, arches, etc., but excluding ashlar facing dressed stone work, etc. complete all as specified and directed. |
| 108 | M & L brick work with subclass 'B' bricks,straight or curved on plan exc 6m mean radius built in Cum CM 1:6 complete all as specified and directed. |
| 109 | M&L for stone walling of random rubble with best quality locally available harder stone such as granite, trap or basalt brought upto courses well bonded bedded, solidly hearted and built in cement mortar 1:6, complete all as specified and directed. |
| 110 | All as per Srl Item No.109 before but except stone, complete all as specified and directed. |
| 111 | Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 112 | M&L for 15mm thick plastering in cement mortar 1:4 on stone masonry surfaces or other than fair faces of brick surfaces, finished even and smooth without ung extra cement, complete all as specified and directed. |
| 113 | Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished even and fair without ung extra cement complete all as specified and directed |
| 114 | M & L rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:3 as on ceiling, facia roof projectio etc finished even and smooth without ung extra cement complete all as specified and directed. |
| 115 | Preparation of newly plastered wall surfaces and applying two coats of cement base paint including preparation of surfaces, complete all as specified and directed. |
| 116 | Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of chalk whitening preparatory to distempering including preparation of surfaces, complete all as specified and directed. |
| 117 | M&L two coats of white wash on new/old surfaces of ceiling including preparation of new surfaces of walls, complete all as specified and directed. |
| 118 | M&L PCC (1:2:4) type B-1 ung 20 mm graded stone agg as in coping, benching cills, pcc gola,roof kerbs and the like including weathering slightly rounded or chamfered on edges directed mixed with water proofing compound (water proofing compound shall be measured separately), complete all as specified and directed. |
| 119 | M & L PCC 1:3:6 type C2 (40mm graded ) as in plinth protection 75mm thick, complete all as specified and directed. |
| 120 | 100 mm thick pcc as in sub base Type C-2 1:3:6,40 mm graded aggreagate complete all as specified and directed. |
| 121 | M&L for Chequered cement concrete tiles with grey cement and no pigment ,30cm x 30cm x 25mm thick, set, jointed and pointed n neat cement slurry n floors complete all as specified and directed. |
| 122 | M&L machine cut kota stone slab flooring 16-18mm thick over cement screed base laid over 15mm screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl nutbing and polishing, complete all as specified and directed. |
| 123 | All as per item No. 122 above but on vertical surfaces over 10 mm thick plastering n cement mortar 1:4, complete all as specified and directed. |
| 124 | M&L mirror polishing on marble/granite/kota stone/terrazzo floor work where ever reqd finish copiete, complete all as specified and directed. |
| 125 | Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint on roof complete all as specified and directed. |
| 126 | Preparation of old surfaces plastered or unplastered wall surfaces including cleaning by brooming down or with steel wire brushing, scrapping down smoke spot, moulds, moss and efflorescent salts and treating oil and greasy spots etc and applying one coat of white wash on walls, complete all as specified and directed. |
| 127 | All as per Item No.126 before but one coat of white wash on ceiling, complete all as specified and directed. |
| 128 | M&L Preparation of old decorated plastered or unplastered wall surfaces including cleaning by brooming down or with steel wire brushing, scrapping down smoke spot, moulds, moss and efflorescent salts and treating oil and greasy spots etc and applying one coat of distemper oil emulsion on wall with 1-2 mm wall care putty complete all as specified and directed. |
| 129 | All as per item No.128 above but two coats of oil bound distemper over new/old surfaces with 1-2 mm wall care putty on walls, complete all as specified and directed. |
| 130 | M&L for preparing surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV restance as per IS 15489:2004, Alkali & fungal restance, dirt restance exterior paint of required shade (Company Depot Tinted) with licon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces complete all as specified and directed. |
| 131 | Preparation of old plastered wall surfaces and applying two coats of cement base paint including preparation of surfaces, complete all as specified and directed. |
| 132 | Preparation of old painted wooden surfaces of any description and otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 133 | Preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed Please Enable Macros to View BoQ information |
